Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.
Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ
The PAC-9's internal voltage-doubling circuitry provides maximum headroom to eliminate input distortion. The higher operating voltage also allows it to be used in an FX loop to place the chorus effect post-gain.
"The Maxon PAC-9 provides a large range of great chorus sounds with completely silent operation. I had never used choruses before this one, as they often resulted in tones that sounded overly processed for my personal taste. This one allows for lovely subtlety, and is rugged and straight-forward to use." - Gretchen Menn
A new spin on an old classic, the PAC-9 brings classic 80's chorusing into the 21st century with modern features and improved sound quality.
The first thing you'll notice when you step on the PAC-9 is a beefy, full-bodied chorusing that punches you directly in the chest - gone are the thin, hissy, sissified chorus tones of yesteryear, replaced instead by a full-frequency effect that simply sounds massive.
NOTE ON POWERING THE PAC-9 - this pedal's voltage regulator IC requires a high inrush current of approximately 2000 mA upon startup. When using with a Power Brick such as the Voodoo Labs Pedal Power 2+, this pedal should be connected to a high current power jack when possible.
If it is not possible to connect to a high current jack, you can power the PAC-9 by leaving a battery in the pedal. Upon initial start-up, unplug the external DC power input cable, engage the pedal, and then plug the DC power input cable back in - the pedal will now power up normally off the external power supply until you power down your pedalboard.
Input Impedance: 500K Ohms
Output Impedance: 10K Ohms or less
Maximum Output Level: +9 dB (400 Hz)
Delay Time: 4.6 msec - 7.68 msec
Speed Frequency: .33 Hz - 8 Hz
Controls: SPEED, WIDTH
Switch: BYPASS / EFFECT (mechanical TBS)
In / Out: INPUT, OUTPUT, INVERSE OUTPUT
Residual Noise: -95 dB (IHF-A)
Indicator: BYPASS / EFFECT LED
Internal Circuit Voltage: 9 VDC (DC-DC Converter)
Current Consumption: 21 mA / 9 VDC
Power Supply: 6F22 9V battery or Maxon AC Adaptor
Manganese battery 8.5 hours @ 25deg C
Alkaline battery 20 hours @ 25deg C
Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) / 2.9" (W) x 4.9" (D) x 2.13" (H)
Weight: 580 g (including battery) / 20.46 oz.
Option: Maxon AC Adaptor (AC210N or AC2009)
If you decide an equipment item is not suitable within 10 days of delivery, you can return it to us for a replacement or refund. Returns must be unused and in their original, undamaged packaging.
Some items are excluded from our money back guarantee, including:
• Computer software that has been unsealed or registered
• Any item that comes directly into contact with the nose, ears or mouth
To arrange a return, just contact our customer service department on 020 7424 2800 or email us at email@example.com