100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Analogue Solutions SQ8 CV & Gate Analogue Sequencer Module

Fast, safe, international shipping.


Guaranteed in stock
ParcelForce, FedEx, Royal Mail
100% Secure Shopping
 1 in stock
 Add to Wishlist
Order by phone
+44 20 7424 1960
quote 674116
Lines open in 6 hrs 40 mins.

The SQ8 is a single channel sequencer with 8 steps. As it is single channel, larger sequencing systems can be built up by doubling up on sequencers. As they are all separate, you can clock them at different speeds or clock divide ratios.

Controls In Detail (standard operation):

Clock In:
The SQ8 requires a +5V clock signal. Each clock signal will advance the sequencer 1 step. When the last step is reached, it resets back to the first step. Take the clock signal from a square wave LFO, Clock module or MIDI to Clock converter.

Clock Thru:
The clock signal appearing at the CLOCK IN socket is buffered and transferred to the CLOCK THRU socket, so it can be daisy chained to another sequencer.

Reset In:
A 5V signal in here will reset the sequencer to step 1.

Step 1 Out:
Each time step one is played, the step 1 gate socket will go high (output +5V). This socket can be used to trigger other devices, such as a cymbal sound at the start of each bar, or to trigger another sequencer. The step 1 out will give a clock signal that is the main clock in divided by out.

CV Out:
This socket will output a control voltage set by the pot for the current step. It can be changed in real time.

Gate Out:
This socket will output a 5V gate when the CV control is pulled out.

Step Button:
This allows the sequencer to be manually stepped by one step at a time whilst the clock is not running. It can also be used to reset the sequence. As with most analogue sequencers, step it to the last step (8 or whatever is patched) so that when you start the clock, the sequencer starts on position 1.

Note: The step button will only work when any clock input signal is at a low state (0V). So it will note work when the clock input is high. This situation will note arise in normal use, as one would only normally use the step button when the master clock is stopped (making the clock signal low). If the sequencer is being clocked by a clock divider, even when the clock is stopped, it is possible that the clock signal may still be high until reset.

CV/Gate pots/Range switch:
The CV and Gate functions are built into a single combined pot/switch. The switch is a push/pull type. Pulling the control out turns off the gate.

There are 8 CV pots, 1 for each step. When the range switch is HI the range is approximately 0 to 8.6V, when LOW the range is approximately 0-4.3V. LOW is best for use when controlling a VCO as this gives better ability to fine tune each step.

The CV pots have a built in Gate switch. Pull the knob out to turn off the gate for that step, push it in to turn the gate on.

LED Indicators:
There are 8 LED's. These will light in turn to show step position.

  • 8 CV pots & 8 Gate switches
  • Width: 18HP
  • Step button
  • Range switch
  • Step 1 out, Reset In, Clock In, Clock Through, CV out, Gate Out
Module Type Sequencer Module

If you decide an equipment item is not suitable within 10 days of delivery, you can return it to us for a replacement or refund. Returns must be unused and in their original, undamaged packaging.

Some items are excluded from our money back guarantee, including:
• Computer software that has been unsealed or registered
• Any item that comes directly into contact with the nose, ears or mouth

To arrange a return, just contact our customer service department on 020 7424 2800 or email us at support@juno.co.uk

View our full range of synth modules