100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

The Harvestman

Items 1 to 2 of 2 on page 1 of 1
Cat: 593848 Rel: 26 Jan 16
Slew limiter & mixer synth module - 8HP wide
Notes: VC slew limiter and DC-coupled utility mixer. The slew limiter preserves the pitch of calibrated 1v/oct signals, and the mixer is versatile for either oscillator submixing or control voltage processing. Rudimentary mute buttons for channels 1/2 are provided as a bonus feature.

Slew Limiter - Manual rise/fall knobs, CV input (assignable to rise/fall or both), CV attenuverter (acts as log/expo bender when no external CV is applied), Slew on/off gate input
Mixer - 3x1 mixer. Channels one and two have mute buttons. Channel 2's knob is a bipolar attenuverter for signal inversion.
Read more
 1 in stock $161.22
Cat: 593856 Rel: 05 Oct 16
Firmware & ROM programmer module
Notes: You need a PICKIT2 to use this device correctly.

- Obtain a Pickit2 programmer from an electronics dealer. It is - Microchip part number PG164120.
- Your Harvestman Digital Audio Electronics dealer may also sell them.
- Connect the Pickit to your USB port.
- Install the software on the CD, and launch it (Windows).

To burn your own Piston Honda ROMs:

Obtain the "25LC512" serial EEPROM chip in DIP package from your electronics dealer. You can also use the 25AA512 if in stock.

- Connect the Pickit to your USB port.
- Install the software on the CD, and launch it (Windows).
- Connect the Firmware Programmer header to the Pickit, lining up the triangle graphics.
- Install one of the EEPROM chips into the Programmer's socket, taking care to not bend the pins.
- From the Device Family menu, select "EEPROMS" (25xx family), then select the 25LC512.
- Use the File menu to load the HEX or BIN file for your waveform data.
- Press the Write button to send the data to the chip and wait for confirmation.
- Remove the chip from the socket when you have a success message, and install it into your - Piston Honda expander.

To update firmware:
- Connect the module's 6-pin header to the Pickit.
- From the Tools menu, select "Check Communication", and the processor should be - correctly detected and identified.
- From the File menu, select "Import Hex" and open the firmware file you wish to upload. - When this is done, the program should self-identify the processor type of your module.
- If it reports that the hex file is successfully loaded, push the "Write" button and wait one minute for the green Success message.
- After this, you may disconnect the module and continue using it in your system.

Note that older designs use a different programming header. The Harvestman Device Programmer adapts the Pickit to this older header. To program using this setup, plug the Pickit into the header on the black Device Programmer board. Plug the ribbon cable into the programming header on the old module. Connect the module to the modular system's power supply and turn on. If the computer reports a USB error, disconnect the ribbon cable from the module and plug it in the other way. Now, repeat the steps described above to open the hex file and write the firmware to the module.

- The eight-pin socket is used for programming EEPROMs from the 25xx series.
- In order to write new firmware to older Harvesteman modules (but also Malgorithm Mk2 and Tyme Sefari Mk2), use the 2x5 pin header.
- The six-pin connector with the fat white arrow is used to connect to a PicKit2 programmer.

- A PicKit2 microchip programmer (PicKit3 works, too) is required for the Harvestman programmer. Get it at your electronics supply store.
- The Harvestman Programmer is used as an interface between the PicKit2 and the module or the ROM chips.
Read more
 1 in stock $36.22
Items 1 to 2 of 2 on page 1 of 1


The Harvestman
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now