Nano Modules

Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Notes: 4 VCAs in 8HP designed to keep your signals clean and colourless

VCAs 1, 2, 3. Each one is equipped with a GAIN control, and a CV IN Attenuverter.

VCA 4. GAIN CV IN and the signal normalled to +5V (fully open VCA).

Additionally, the outputs of these channels are cascaded from left to right, allowing ALT to behave as a four-channel mixer.

Notes: CAIXA 104 is an advanced fully portable 104HP Eurorack Modular Case, with a wide range of utilities fully integrated on it. Connect up to 19 modules and carry it anywhere you go thanks to its handle.

Nano Modules designed CAIXA 104 to provide a solid base for starting your modular journey and squeezing every centimetre of your system in case you're already an experienced Eurorack-head.

7 integrated modules

19-slot busboard with reversed protection headers

A selection of utilities that everyone usually needs to have in their modular synthesizer, just like the Buffered Multiples, the Stereo Mixer or its 2 LFOs.

Nano Modules have also focused on improving connectivity with the integrated inputs and outputs.

19-slot busboard with reversed protection headers

+30W power supply - An efficient and reliable supply which is more than enough to provide plenty of power for a 104HP system (and more).
+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A

Deep enough.
The maximum module depth above the busboard connectors is 47mm, but you can place modules up to 60mm outside of the busboard space. That should be sufficient to fit the vast majority of modules out there.

Carry your synthesizer anywhere you go.

The lightweight aluminium, together with the handle, make it super easy to take your modules with you. Weighs only 1.7 Kg!

Utility Modules
Balanced Inputs
Buffered Multiples
Precision Adder
2 LFOs
Sample & Hold
Stereo Mixer
Stereo & Headphone Out

Power Specifications

30.7W Integrated switching power supply with Meanwell 60W power brick.

+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A

Construction

Dimensions: 535 x 200 x 85 mm
Materials: Anodized aluminum
Aluminium extruded rails with steel threaded inserts
Rubber feet to protect your desktop.
Depth Maximum module depth -> 47 mm inside busboard space, 60mm outside.

Notes: ***B-STOCK: Box opened, product in perfect working order***


CAIXA 104 is an advanced fully portable 104HP Eurorack Modular Case, with a wide range of utilities fully integrated on it. Connect up to 19 modules and carry it anywhere you go thanks to its handle.

Nano Modules designed CAIXA 104 to provide a solid base for starting your modular journey and squeezing every centimetre of your system in case you're already an experienced Eurorack-head.

7 integrated modules

19-slot busboard with reversed protection headers

A selection of utilities that everyone usually needs to have in their modular synthesizer, just like the Buffered Multiples, the Stereo Mixer or its 2 LFOs.

Nano Modules have also focused on improving connectivity with the integrated inputs and outputs.

19-slot busboard with reversed protection headers

+30W power supply - An efficient and reliable supply which is more than enough to provide plenty of power for a 104HP system (and more).
+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A

Deep enough.
The maximum module depth above the busboard connectors is 47mm, but you can place modules up to 60mm outside of the busboard space. That should be sufficient to fit the vast majority of modules out there.

Carry your synthesizer anywhere you go.

The lightweight aluminium, together with the handle, make it super easy to take your modules with you. Weighs only 1.7 Kg!

Utility Modules
Balanced Inputs
Buffered Multiples
Precision Adder
2 LFOs
Sample & Hold
Stereo Mixer
Stereo & Headphone Out

Power Specifications

30.7W Integrated switching power supply with Meanwell 60W power brick.

+12V output at 1.25A
-12V output at 1.1A
+5V output at 0.5A

Construction

Dimensions: 535 x 200 x 85 mm
Materials: Anodized aluminum
Aluminium extruded rails with steel threaded inserts
Rubber feet to protect your desktop.
Depth Maximum module depth -> 47 mm inside busboard space, 60mm outside.

Notes: CEQ is an analogue 3-band Equalizer and Compressor module in 4HP. Enhance your synth voices, get some punch and have fun playing with the DJ-style EQ.

CEQ is perfect for your final live mix or you can even use several on individual synth voices.

Great versatility.

CEQ Compressor can be used to subtly tune the dynamics of your voice, saturate or distort it heavily and everything in between. Want to sound a little fatter? This one is for you.

Synth tracks will love it.

Thanks to a switch on the back of the module, you can adjust the compression speed between FAST and SLOW depending on your needs.

CEQ is an analogue module.
NO digital noise.
BIG headroom.

Specifications:

EQ Cuttoff Frequency
High: 2567Hz
Mid: 256Hz to 2567Hz
Low: 256Hz
Filter type Sallen Key configuration.
Filter Q 0.5

Dimensions 4HP - 20×128,5mm

Notes: The EXP4 is an Expander module designed specifically for the Performance Mixer.

. Stereo Outputs for each channel (post VCA).
. CV control for each channel's MUTE function.
. CV AUX for the Stereo Channels.

Included with the EXP4 are a power cable and a 16-pin ribbon cable for easy connection to the Performance Mixer

Dimensions 4HP - 20×128,5mm

Notes: FONT is a massive sounding liquid filter- designed to bring you powerful basslines, tons of FM modulation and a clean resonance over your audio path.

It features two simultaneous outputs:
2-pole Low Pass
2-pole Band Pass

It can also work as a sine oscillator, tracking 1V/OCT when the resonance is at its maximum level.

FONT can be used to make basslines, acid patterns thanks to its organic and musically sounding resonance.

Ping it to produce percussion sounds such as, bongos, congas or toms.

Applying a pitch envelope, it really shines as a kick-drum machine!

22 mA +12V
25 mA -12V
0 mA 5V
15 mm deep
O 4.60 (10 Votes) Average Rating

Notes: MAR is a multichannel dual mixer module for the modular synthesizer. Both mixers are capable of mixing audio, CV and gate signals because they are DC coupled. MAR has two independent 4-channels mixers:

Mixer X: Is a four channel mixer with gain control for each channel. The potentiometers use logarithmic tape to have a good control with audio signals. This mixer features two outputs, the mixer output and its inverted. The output level is shown in the LED.

Mixer Y: Is a four channel mixer with gain control for the sum of the Y channels. If no jack is connected to the input Y1, the output of the Mixer X is normalled to Mixer Y. The potentiometer use logarithmic tape to have a good control with audio signals. This mixer features one output, the sum of the 4 channels. The output level is shown in the LED.

This Mixer can work as two 4-1 Mixer, or 7-1 Mixer with global gain control.

INPUTS:
4 Mixer X inputs.
4 Mixer Y inputs.

OUTPUTS:
Mixer X output.
Inverted Mixer X output.
Mixer Y output.
Mixer X + Mixer Y output.

FAST SPECS:
Dual mixer module for the modular synthesizer - Eurorack.
8 HP - 15mm Depth - Skiff friendly.
Both mixers are capable of mixing audio, CV and gate signals.
Mixer X: 4-channel mixer with gain control for each channel.
Mixer Y: 4-channel mixer with gain control for the sum of the channels.
If no cable connected to Mixer Y input 1, the output of the Mixer X is normalled to Mixer Y.
Can work as two 4-channel mixers, or one 7-channel mixer.
The output level is shown in the LEDs.

Notes: A warm and deep sound source you can rely on

A flexible and warm Analog Multifunction Oscillator, rich in harmonics. Excellent for performance use!

ONA can work as an Audio Oscillator or as a Low Frequency Modulator and it provides control over all its parameters, making it a versatile, deep and easy-to-use oscillator.

Thanks to its triangle-core oscillator and wave-shapers you can choose between a big palette of output waveforms to give shape to your ideas.

Classic Waveforms. Sine, Triangle, Saw and Square.

2 Complex Waveforms with Pulse Width Modulation.

2 Sub-Waveforms to add some bass sounds easily.

Blend them to give unlimited depth to your sound!

Notes: One of many performance mixers released in 2023, NANO's offering treads its own path with knob recording, allowing you to automate and play back movements. A clever approach which opens up some interesting performance techniques.

Supplier's Notes:
Performance Mixer serves as a central control and mixing hub for your modular system, allowing you to combine and shape multiple audio signals from various sound sources.

But what really makes it stand out is its Knob recording feature. Just hit REC, twist the knob, and let the module record your moves.

4 different areas

MONO

Channels 1 . 2

Volume, Panning and Auxiliary send controls with CV for each function.

Knob recording (REC), CUE bus and MUTE function are operated through the switches.

STEREO

Channels 3 . 4

Same as MONO Channel, but the CV for the AUX function is replaced by the right (R) audio input.

AUXILIAR

2 Mono Sends (X & Y) with pre-fader / post-fader selector for each channel.

2 Stereo Returns with volume adjust.

MASTER

Master volume adjust for the main outputs with vu-meter for checking the signal levels.

Headphone output with volume and cue/mix blending knob.

Knob Recording.

Easily record and loop the movements of AUX, PAN and VOLUME controls on each channel, adding depth and dynamism to your sound.

Just press the REC button and then move the desired knobs to start recording.

MUTE LED

The light on the MUTE button not only shows whether each channel is muted or not, but also gives information about the status of its Knob Recording function.

Specifications

Dimensions 28HP - 142,2×128,5mm
Current 200 mA +12V / 125 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 10k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 40mm including connectors (Skiff friendly)

Notes: Give shape to your sounds.

An easy-to-handle module, perfect for those functions that you need without overthinking!

QUART has 4 independent functions that can work as Low Frequency Oscillators or Attack-Decay Envelopes depending on whether the Trigger Inputs is connected or not.

If the Trigger Input is not connected, the function will oscillate freely (LFO) but if a patch cable is connected, it will work as an Envelope (AD).

Notes: SERRA generates a fully controllable 4 segment function (Attack, Decay, Sustain, Release) that can be adjusted in time with its own sliders and external CV inputs.

Tweak and modulate shapes until they fit your taste thanks to its onboard Attenuverter & Offset controls.

Tweak it further.

Nano Modules have made these built-in Attenuverter & Offset feature applicable to an external signal if connected to the SIG input, and then extracted via the OUT output.

Wide range.

As fast as 1 millisecond and as slow as 40 seconds. You can even improve this range by applying external CV to the selected stage.

Clear layout.

Accessible and comfortable to use, the controls are easy to handle and you can always see the envelope state through the built-in LEDs.

Specifications

Dimensions: 10HP - 50×128,5mm
Current 53 mA +12V / 39 mA -12V / 0 mA +5V
Input & Output Signals: +/-10V
Impedance Input: 10k - Output 10k
Materials: PCB and Panel - FR4 1,6mm
Depth: 20mm - Skiff friendly

Notes: ST.MAR is a 3-channel Stereo Mixer with individual and master volume controls, CV modulation and mute switches. All the basics to blend your stereo signals in only 8HP.

Voltage controls for each channel.

Modulate the volume of each audio source using external control signals, such as envelope generators or sequencers.

Details

Dimensions 8HP - 40×128,5mm
Current 50 mA +12V / 52 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 47k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 35mm - Skiff friendly