100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Malekko Heavy Industry

Home  Labels  

Malekko Heavy Industry

Options
Items 1 to 6 of 6 on page 1 of 1
Cat: 735675 Rel: 01 Jul 19
 
2-stage LFO with Sequential, Composite & Modulation modes
Notes: The Malekko Goatkeeper (MGK) is a completely redesigned version of the Lightfoot Labs Goatkeeper, first released in 2007. The core of the pedal is an all analogue tremolo circuit using a THAT Corp VCA, which when combined with the built in waveforms, can produce tremolo sounds from percussive to smooth. The MGK's LFO generation consists of two stages, each with a range of multiplier values and waveform selection.

The two stages can be run in 3 ways:

- Sequential: The two stages are run one after the other
- Composite: The two stages are run simultaneously and the effective waveform is a polyrhythmic composite of the two.
- Modulation: The two stages are run simultaneously and the effective waveform is the equivalent of one modulating the other.

Tempo can be set with the RATE knob or with the Tap/Sync input. The Tap/Sync input accepts a Malekko Lil' Buddy for tap tempo control, or an analogue clock/metronome signal. The DEPTH knob allows the effect to vary from subtle to high intensity.
Read more
 1 in stock $218.24
Click for better price!
or call +44 20 7424 1960
quote 735675
Cat: 676890 Rel: 26 Apr 19
 
Analogue synthesiser voice with expressive sound - 26HP
Notes: MANTHER GROWL is a full featured, Eurorack monophonic synth voice with an analogue signal path, and like the Manther Tabletop, it includes a coveted CEM3340 VCO IC chip. The analogue filter is based on an SSM2044 chip. Square, Saw and Triangle waveforms have their own individual level controls (manual control as well as CV jack inputs), as well as their own individual outputs. Wavefold control can be set to Tri or ALL (folds all waveforms and external input post-filter). Dial the independent LFO level controls to modulate pitch, pulsewidth and filter cutoff. Also includes manual controls over both VCA and filter ADSR and both the VCA and filter have individual gate inputs.
Read more
 2 in stock $471.12
Click for better price!
or call +44 20 7424 1960
quote 676890
FORTHCOMING
Malekko Quad LFO Module (black faceplate)
Cat: 766096
 
LFO module
Notes: An LFO, or low frequency oscillator, sends control voltage out in the shape of a waveform. The Quad LFO available shapes include sine, ramp, saw, triangle and pulse and moves through these shapes using the SHAPE slider. You can send these 4 distinct LFOs directly out or to other modules for frequency modulation, VCA control, filter control, etc.

What makes this Quad LFO module different is that it also includes a 16 step automation sequencer for each channel, as well as autosave or expanded preset functions when used in conjunction with Varigate 4+ and Varigate 8+.

Multiple Quad LFOs can be controlled by one Varigate 8+ or Varigate 4+ on the same bus to instantly save/recall presets.

To create a sequence of automation for an LFO, select a channel and then hold the RECORD button and move the sliders for Frequency, Phase, Shape, Distort and Level and those slider movements will play back automatically as the Quad LFO cycles through the sequence. This sequencing feature allows for a multitude of dynamic possibilities for live performance and recording.

Set each LFO to trigger via one of the 4 individual gate inputs, or set channels 2 through 4 to follow channel 1 for quadrature and phase modulation. Change the direction of each channel of sequenced automation to Forward, Reverse, Pendulum or Random. Switch the playback speed and style between Fast, Slow or Tempo Sync. There are also inputs for both Clock and Reset.


Read more
MRP:$346.25 SAVE 17%
coming soon $288.55
Malekko Quad VCA Module (synth module)
Cat: 676895 Rel: 17 May 19
 
4-channel, advanced voltage controlled amplifier - 8HP
Notes: Quad VCA is a 4-channel, advanced voltage controlled amplifier with an analog signal path that can either be used stand-alone, or in tandem with the Varigate 4+ and 8+ for multiple preset recall over the power bus. Input channels 2-4 are normalled to 1 and Scan Mode allows for complex level and modulation routing. Each channel includes a mute function and all outputs are summed to a mix output. To adjust level and CV modulation per channel, use the Select Channel buttons and then adjust the Offset and Attenuverter controls. Scan Mode includes two functions. Scan: Insert 4 inputs, 1 CV and monitor Mix output for 4:1 scanning. Pan: Insert an input into Ch 1 and Ch 1 CV will route input to up to 4 different outputs. Offset and Attenuation can be adjusted to control how incoming CV is applied. The Remote switch allows you to access saved presets when paired with Varigate 8+ (100 presets) or Varigate 4+ (16 presets). In stand-alone mode, all settings are auto-saved.
Read more
 1 in stock $174.17
Cat: 616197 Rel: 07 Jul 16
 
Dual analog filter eurorack synth module - 16HP wide
Notes: Dual analog filter module:
The Malekko Richter series in Eurorack modular format offers the same great sound, ergonomics, musicality, and quality that made the Wiard 300 series legendary, at a fraction of the cost and size.

The Dual Borg contains one Borg I (left side) and one Borg II (right side). These are two different filters, each with their own character. They do not sound the same nor react the same way to your inputs. The Dual Borg is a versatile audio processor and the concept comes from a marriage of two divergent influences: the Buchla 292 Low Pass Gate and the Korg MS20 filter.

The Borg Filter is different from most filters in that it, at its heart, is a vactrol. Vactrols are combination light sensor/light resistors that possess interesting sonic traits. Often described as "rubbery" or smooth in quality, vactrols are also known for their relatively slow response. This response creates a natural, very musical decay. As a low pass gate (frequency mode), the Borg will act as a filter and a VCA simultaneously. In combination with the characteristic vactrol response, this creates a signature sound that is desired by many synth enthusiasts, especially when used with very short, percussive patches.

But the Borg is no one-trick pony, and low pass gates are not for every patch. When in frequency mode, the Borg is a 12db filter with loads of personality. Gorgeous resonance (influenced by the MS20 and shaped by the vactrol design) swells from subtle warmth to a roaring howl that is unique to the Borg! For entering VCA mode, the new push button VCA switches allow instant changeover between modes- great for performances!

A continuously adjustable low pass to high pass control is provided (a notch filter is a mix of these two). Each filter has one audio input and two CV frequency inputs (one with attenuation). Two separate outputs are provided, and output 2 has a slightly more aggressive resonance. Removing either jumper on the back of the filter will make the resonance "scream" even more! The jumper behind the Borg I effects the Borg I's resonance, and the jumper behind the Borg II changes the Borg II's resonance.

The Borg I (left side) has a slower response and a more mellow sound compared to the Borg II (right side). Thanks to its longer decay time, the Borg I is best for recreating the famous Buchla bongo patch, and the Borg II is best for a faster, more aggressive response.

The signal path of the Dual Borg is selectable: Series or Parallel.
- In Series mode, when you plug into either in 1 or in 2, or even both inputs (as a mix), the signal is routed through the Borg I then Borg II filters and both out 1 or out 2 have the same signal. If you are connected to both outputs, you will only get signal from out 2.
- In Parallel mode, a single input into in 1 or in 2 is routed through both filters side by side, and a single output (either out 1 or out 2) will give you a mix of both filters. If you have only one input but two outputs, out 1 is the Borg I filter only and out 2 is Borg II only. If you have two inputs and two outputs, then each filter is completely separate: in 1 and out 1 is Borg I, in 2 and out 2 is Borg II. To use only one filter, you must patch into both outputs then choose which filter's output you want to hear.
Read more
 1 in stock $307.42
FORTHCOMING
Malekko Varigate 4+ Module (black faceplate)
Cat: 766093
 
sequencer module
Notes: The Varigate 4+ is a 4-channel, 8-step sequencer that includes most features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you're looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).

Each Channel (or Track) correlates with it's own sequencer (so 4 independent sequencers). The addition of the Gate/CV Switch allows for switching between 4 channels of CV, 2/2 for 2 channels of CV and 2 channels of gates, or all 4 channels to output only gates. Additionally, each step of a sequencer can be programmed with Probability for gates, Repeats, Glide and Notes (when in a CV mode). There is a also a Randomization feature for Repeats, Notes and Glide. Channel parameters for Scales, Sequence Direction (Forward, Reverse, Pendulum and Random), Sequence Length, Division, Multiplication and Pulsewidth are all easily accessible using Track Mode.

Easy Preset Recall makes the Varigate 4+ perfect for live performance. Pair it with the Malekko Voltage Block for maximum control.
Read more
MRP:$321.07 SAVE 17%
coming soon $267.56
Items 1 to 6 of 6 on page 1 of 1

Filter

Malekko Heavy Industry
Release Date
Featured
Close