Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

MRG Synthesizer

Home  Labels  

MRG Synthesizer

Options
Items 1 to 3 of 3 on page 1 of 1
MGR Synthesizer 3320 LPF 24dB Resonant Low Pass Compact Filter Module
Cat: 798347 Rel: 25 Nov 20
 
Low pass compact filter module
Notes: The MRG 3320 LPF is a low pass voltage controlled filter based on the AS3320 (clone of the CEM3320).

This is a compact, but powerful and high quality 24dB 4 poles resonant low pass filter.

It is a clean, low noise filter, but can reach some screamy qualities when resonance is turned to the maximum.

All parameters are both voltage and knob controlled.

The panel is a 1.6mm FR4 PCB, matte black.

Lead-free PCBs, components and solder.

Technical Details:
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Audio Signals
INPUT: Input Audio Signal.
OUTPUT: Output Filtered Signal.

Control Signals
CUTOFF: CV for filter cutoff modulation.
PEAK: CV for filter peak modulation.

Controls
C: Cutoff base frequency.
P: Peak base amount.

CM: Attenuator for the CUTOFF input.
PM: Attenuator for the PEAK input.
Read more
MRP:$103.06 SAVE 17%
 1 in stock $85.87
MRG Synthesiser ADSR Compact Envelope Generator Module
Cat: 798361 Rel: 25 Nov 20
 
Compact ADSR envelope generator module
Notes: Simple, compact envelope generator at a nice price. Capable of ultra-fast envelopes as well as long, slow slopes with attack up to five seconds and decay/release up to eight seconds each.

Supplier's Notes:
This is a classic envelope generator, based on AS3310, a clone of the CEM3310. Features a separate trigger input, normal and inverse envelope output, high quality components and careful engineering.

When the TRIGGER input is unconnected, rising and falling edges of the GATE input will trigger a classic ADSR envelope.

If the TRIGGER input is connected, a high GATE level will bring the output to SUSTAIN level, and the GATE falling edge will start the release phase. A TRIGGER input when GATE is high will start an attack/decay cycle. Attack, Decay and Release times vary exponentially with the control knob. For each of these parameters, the ratio between the longest possible time and the shortest is slightly more than 3000:1.

The panel is a 1.6mm FR4 PCB, matte black.

Lead-free PCBs, components and solder.

This is the second version of the MRG ADSR. The previous one is sold out. Although the module has been completely redesigned, the only visible change from the previous module is the knob orientation.

Technical details
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Attack time range: 1.75msec to 5s.
Decay time range: 2.4msec to 8s.
Release time range: 2.4msec to 8s.

Attack level: 5 V
Sustain level:0 to 5V
Inverse envelope: 0 to -5V
Read more
 3 in stock $73.28
MRG Synthesizer 3360 VCA Dual Linear Compact VCA Module
Cat: 798351 Rel: 25 Nov 20
 
Dual linear compact VCA module
Notes: This is a Dual Linear Low Noise VCA module, based on the AS3360.

Both VCAs can be controlled by a CV entry, modulated by control knob.

VCA1 also has an initial gain control (B1), that offsets the CV input by a constant value. This allows VCA1 to be left always open, with the initial gain controlling the amplification.

If both input jacks are used (IN1, IN2), the two VCAs will operate independently. The output of VCA1 will go to OUT1, the output of VCA2 will go to OUT2.

If there's no jack in IN2, the two VCAs will be cascaded, and the output of VCA1 will go both to OUT1 and as an input to VCA2.

This allows this module to be used to process both the MIDI Velocity and the envelope of an audio signal.

Inputs:

IN1: Input Signal for VCA1.
CV1: Control Voltage for VCA1's amplification.
IN2: Input Signal for VCA2. If no IN2 is present, the input of VCA2 will be the output of VCA1.
CV2: Control Voltage for VCA2's amplification.
Outputs:

OUT1: Output of VCA1
OUT2: Output of VCA2
Controls:

M1: Attenuator for CV1
B1: Initial gain of VCA1
M2: Attuenator for CV2

40 mm deep
Read more
MRP:$103.06 SAVE 17%
 1 in stock $85.87
Items 1 to 3 of 3 on page 1 of 1

Filter

MRG Synthesizer
Release Date
Featured
Close