Bi-directional MIDI to DIN Sync converter with 1 MIDI In & 1 MIDI Out / 1 Sync In & 1 Sync Out
Notes: Receives MIDI clock and stop/start data and converts them to DIN-Sync (Sync-24). Also converts DIN-Sync back to MIDI.
High quality Kenton MIDI MIDI to DIN-Sync converter box with opto-isolated MIDI In plus MIDI Out, Sync In & Sync Out sockets. Powered from a multi-region mains adaptor (wall wart) so you can fit and forget. Can also be powered from a USB socket (although not a USB product)
USB MIDI controller featuring 9 rotry knobs, 9 buttons and a joystick, perfect for use with Ableton, Traktor etc
Notes: Perfect for use with Ableton Live and Traktor, the Killamix-Mini is a compact USB controller housed in a sturdy brushed aluminium case with solid aluminium knobs. It is the perfect companion to your laptop, whether you are using a sequencer, DJ-ing or VJ-ing, just plug in the USB cable and go. Despite having only 9 knobs, 9 buttons and a joystick, the Killamix-Mini can in effect be 144 knobs,144 buttons and a joystick.
By pressing a single knob you can select any MIDI transmit channel from 1 to 9, or, with a combination of two knobs, select the remaining channels 10 to 16. When you select a new MIDI channel, the current values of the knobs for that channel are stored so that they can be restored when you next select this channel, thus avoiding any parameter jump difficulties typical of units with traditional knobs and faders.
When the values are restored, the LED rings around the knobs indicate their new positions.
Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.
The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.
MIDI signal mixer unit featuring 8 input connectors
Notes: Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***
Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).
USB host to MIDI converter for 'Class Compliant' USB MIDI devices
Notes: Your USB device is plugged into the USB MIDI Host MkII instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).
MIDI data received at the MIDI In socket will be sent to the USB device. MIDI data received from the USB device will be sent to the MIDI Out socket.
The attached USB MIDI device MUST be 'Class Compliant'.
The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.
High quality MIDI to CV converter for Eurorack A100 format modular systems
Notes: Kenton's Modular Solo is a high-end MIDI/CV converter with lots of nifty additional functions. The module looks like a Eurorack version of the Pro Solo. However, it offers some nice additional features like clock divisors and more flexible auxiliary outputs.
High specification CV to MIDI converter - designed to work with all types of CV inputs
Notes: - CV & Gate inputs on 3.5mm mono jack sockets
- A to D conversion for main CV input is 16 bit high quality ADC
- V/octave, Hz/V or 1.2V/oct modes selectable
- Gate type can be selected as Gate or S-trig
- Aux1 & 2 inputs on 3.5mm mono jack (continuously variable or switch selectable)
- Auxes can select controller number
- Auto tune feature makes setup easy
- MIDI Out on 5 pin DIN socket
- Non-volatile memory EEPROM (no back-up battery required)
- 32 bit ARM processor
Bi-directional MIDI-DCB interface, including 14 pin DCB lead
Notes: The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8 (must have an existing DCB 14 pin). Just plug in and go.
As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.
2 x 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the selected DCB lead.
High specification single synth MIDI to CV converter
Notes: The PRO-SOLO Mk3 converts MIDI data into CV- gate and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. High-resolution 16-Bit converters provide accurate tracking and fast response. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).
The unit features two CV- and one gate output, additionally there's an analogue clock output. MIDI thru socket can also be used as DIN-Sync output or it can output two additional voltages with a special cable. MIDI synched LFO.
Single DIN Sync to 5x DIN Sync outputs (DIN Sync splitter)
Notes: Receives DIN Sync data (sometimes called Sync-24) from a single source (e.g. sequencer or drum machine) and produces identical copies at the 5 DIN Sync Output sockets. These can then be connected to the SYNC IN sockets of other devices which require DIN Sync signals sent to them.
High quality Kenton Active DIN Sync Splitter box. Powered from a mains adaptor (wall wart) so you can fit and forget. Each DIN Sync output socket can drive at least 2 Sync inputs (if used with a splitter cable).
- DC power input jack 2.1mm (centre +ve)
- Power indicator light (flashes with sync signal)
- 9V switch mode power supply included. Products bought directly from Kenton are supplied with the appropriate power supply for the delivery address. Four types are available, UK / EU / USA / Australia.
- Housed in a metal box so it can withstand the knocks
Attractively finished in brushed aluminium with black screen print
Please note this is NOT a MIDI product - NEITHER THE INPUT NOR THE OUTPUTS ARE MIDI
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.
High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.
1 MIDI in to 25 MIDI thru sockets, works for ALL MIDI messages including Clock, SysEx, MTC etc
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.
High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.