100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Blue Lantern Modules

Home  Labels  

Blue Lantern Modules

Options
Items 1 to 25 of 25 on page 1 of 1
BLM 10 Stage Steiner VCF Module
Cat: 774014 Rel: 13 May 20
 
VCF module
Notes: This product is an analog filter that processes -5v/+5v synth level audio signals. This particular product is using a 10 stage diode ladder circuit influenced from a classic Steiner filter.

Width: 10hp
Current: +16mA,-15mA

16 mA +12V
15 mA -12V
32 mm deep
Read more
MRP:$169.25 SAVE 17%
 2 in stock $141.04
Click for better price!
or call +44 20 7424 1960
quote 774014
BLM Accented Asteroid Bass Drum Module
Cat: 774002 Rel: 13 May 20
 
bass drum module
Notes: This module use the classic 'twin T' circuit to generate a sine wave for percussion and drum duties. This particular module has an additional accent circuit. The accent circuit allows for volume changes when two trigger sources are used. This module covers a good spectrum of possible classic drum sounds : 808, 909, Gabber, wood blocks, etc.

There is a boost circuit to push the sine wave into a square wave shape.

Control: Tune knob, Sweep (like a fine knob), Tone knob (muffled or pop sound), Decay knob, accent knob, and boost knob.

Jacks: Accent trigger input, Trigger input, and BD output.

Operation is straight forward. You patch a trigger signal into the trigger input and use the Out jack to hear the drum sound. The toggle switch allows for long 808 style drums, middle position for shorter drums, and toggle right for shorter stuff.

For default position sound exploring have the tune knob fully clockwise and sweep knob in the middle. Then use the fine knob to fine tune the pitch. If you require a lower range then turn the tune knob a bit counter clockwise, and use the Sweep knob to again fine tune.

When using the Accent circuit, you will hear better results when the accent knob is middle position. If the accent knob is fully clockwise the effect is less noticeable.

32mm deep.
Read more
MRP:$174.50 SAVE 17%
 1 in stock $145.41
Click for better price!
or call +44 20 7424 1960
quote 774002
BLM Accented Percussion Envelope Generator Module
Cat: 774006 Rel: 13 May 20
 
envelope generator module
Notes: Module: Accented Percussion Envelope Module (APE)

envelope generator, percussion, vca

Width: 6hp

Depth: 32mm , 1.26 inches clearance

Current: +19mA, -32mA

Circuits: Attack Decay Envelope Generator, and VCA's.

What does this module do?

This module allows you to add that dynamic 'accented' sound found in vintage gear like the Pearl SY-1 without having to build one of those kits, or hunt down the original. This module was influenced by such gear, but with modern parts. The goal was not to clone, but to get you really close results.

-There is a vca on the envelope output (DEPTH) with it's own CV Level input. This Dynamic Envelope has it's own output to give external vco's a 'pitch' ability. To do Disco 'POW' for example.



-There is another vca set up with CV Accent control just for the audio input.


If you patch up a sequencer, you can get very close results to the DFAM envelope portion.

*Gate or trigger input mode.

*3 modes for envelope time: Long, Perc (middle), and Short.
Read more
MRP:$116.77 SAVE 17%
 1 in stock $97.31
Click for better price!
or call +44 20 7424 1960
quote 774006
BLM Active Buffered Multiple Module
Cat: 775752 Rel: 13 May 20
 
multiple module
Notes: This is an active multiple using the TL074 op amp to copy the signal and repeat the patch, using a simple design. What goes in, comes out exactly the same, and no resistors have been used to play with the ratios. A 100k to ground clamp has also been added so that you can copy even fast clocks, gates, etc and they will not 'stick' together to make one big pulse, which can be a problem with some multiples.

You can have two long 8 repeated outs and one four repeated out, or patch all five inputs to have five sets of four repeated outs.

5 mA +12V
5 mA -12V
Read more
MRP:$103.65 SAVE 23%
! low stock $79.81
Click for better price!
or call +44 20 7424 1960
quote 775752
BLM Arcade Kick Module
BLM Arcade Kick Module (synth module)
Cat: 774017 Rel: 13 May 20
 
kick module
Notes: This product is used to produce drum and percussion sounds. You can make 909 type of kick drums- the toggle switch on the left chooses between long and short vca decay. The toggle switch on the left chooses long and short pitch envelope decay. Smack knob control lefts you mix in a noise 'paper' sound for the drum.

You can mix in two trigger sources to create complex percussion patterns. The internal circuit is using logic 'OR' triggering.

This product was refined for optimum sound and response from the controls. Part values were changed from the original 909 design.

-There is onboard distortion to get techno type of kick drums.

-This internal oscillator is triangular core, with internal reset.

-The internal trigger conditioner can take audio rate frequencies.

-There is a manual push button.

Width: 10hp

Current: +30mA,-24mA
Read more
MRP:$205.98 SAVE 17%
 1 in stock $171.65
Click for better price!
or call +44 20 7424 1960
quote 774017
BLM Barton Duo Quantizer Module
Cat: 773978 Rel: 13 May 20
 
quantizer module
Notes: Quick and easy dual quantiser module from Blue Lantern. Two identical quantiser circuits, each offering a range of 16 scale options, adjustable independently.

Supplier notes:
This is a quantizer based on the Michael Barton simple quantizer firmware PIC. There are two identical circuits found on this module. You can select two modes using the toggle switch. The 'Stand' mode is the standard mode which includes the follow scales:

STANDARD BANK

1.Bypass - Inputted voltage is outputted

2.Major - Root, 2nd, 3rd, 4th, 5th, 6th, 7th

3.Minor - Root, 2nd, flat 3rd, 4th, 5th, flat 6th, flat 7th

4.Major Pentatonic - Root, 2nd, 3rd, 5th, 6th

5.Minor Pentatonic - Root, flat 3rd, 4th, 5th, flat 7th

6.Blues Scale Root, flat 3rd, 4th, flat 5th, 5th, flat 7th

7.Whole Tone - Root, 2nd, 3rd, flat 5th, flat 6th, flat 7th

8.Chromatic - All 12 notes



The 'OCT' mode is the Octave BANK, which includes the following:

OCTAVE BANK

1.Bypass - Inputted voltage is outputted

2.Octave - Root

3.Octave and Fifth - Root, 5th

4.Octave and Flat Fifth - Root, flat 5th

5.Major Arppegio - Root, 3rd, 5th

6.Minor Arppegio - Root, flat 3rd, 5th

7.Dominant Arppegio - Root, 3rd, 5th, flat 7th

8.Chromatic

You use the knobs to select the different scales.
Read more
MRP:$137.76 SAVE 17%
 3 in stock $114.80
Click for better price!
or call +44 20 7424 1960
quote 773978
BLM CMOS Clock Divider Module
Cat: 775739 Rel: 13 May 20
 
clock divider module
Notes: This has 4 musical divided sections: divide by /2, /4, /8, /16. Then each section has a phased output where you can delay a trigger event for example.
So this is designed around the falling edge of the inputted clock source (wave), the so called 'musical' division.
On the far right, to fill the space I included a powered multiple so that you could repeat a signal. The multiple does not have any output resistor, so what you patch in is going to output an exact copy (important for pitch processing).

You use the module to breakdown a clock source, for example an LFO or VCO, into subdivisions for triggering events. All the divided outputs are simultaneous, so you can patch to drum modules, high hats, sequencers, etc., at the same time.

The module will except just about any wave: saw, sine, triangle, square, ramp wave. Each one will influence the processing a little different as far as time is concerned. You can also use the outputs at audio rate, to use as a subharmonic generator.
(1) Master Clock Divider circuit, (1) op-amp powered multiple, (1) Clock input pass through and Reset pass through.
Read more
MRP:$190.24 SAVE 22%
 1 in stock $148.69
Click for better price!
or call +44 20 7424 1960
quote 775739
BLM CMOS Party Logic Module
Cat: 775755 Rel: 13 May 20
 
Logic module
Notes: The CMOS Party Logic, by Blue Lantern, is a readily patchable boolean logic module just waiting for a square wave or clock signal into its corresponding A and B inputs in order to generate a variety of output signals. The module's AND, NAND, NOR, XOR, and OR outputs ensure a variety of potential combinations.

Additionally, the CMOS Party Logic features extremely low latency and is capable of operating at audio rate.
Read more
MRP:$103.65 SAVE 23%
 4 in stock $79.81
Click for better price!
or call +44 20 7424 1960
quote 775755
BLM Cydonia Bi-Phase VCF Module
Cat: 775759 Rel: 27 May 20
 
synth module
Notes: The module has two filters, and two OTA-based VCAs. Most of the controls are setup to control both filters with one set of parameter knobs. There is a spread knob that separates the resonance peaks between both filters. You can get cool vocal and nasal filtering with careful adjustment. The filters self resonate. There is a trimmer for each filter which allows you to adjust how much feedback you want.

There is a CMOS based logic control system to select the state variable outputs. DG412 modern analog switch is used internally. This analog switch is made for audio (-5v / +5). There is a 'reset' button to quickly go back to LP flavor.
Read more
MRP:$360.80 SAVE 22%
 1 in stock $282.08
Click for better price!
or call +44 20 7424 1960
quote 775759
BLM Dwarf Star Stereo Delay Mk2 Module (B-STOCK)
Cat: 783142 Rel: 13 May 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Excellent stereo/dual mono delay module. CV inputs allow you to control the delay times independently, allowing for some creative modulation effects.

Supplier notes:
This module has two echo delay effect circuits based on the Dwarf Star Semi Modular system. With this module you can add cool delay fx to synth level signals. Each of the parameters has CV control with their own attenuators. There are three parameters per channel. The two echo fx circuits are mirrored on the front panel: Channel A and Channel B.

The fx processing was fine tuned for clean fx processing. You can however patch a cv input into the 'REPEAT' parameter, have the RCV attenuator fully clockwise, and force it to feedback into loud trash. There is no switch jack on the input jacks. However, all the CV jacks have switch jack internal connections. This allows you to modulated both channels using only the the Channel A side. For true independent patching on each separate channel simple patch something into the corresponding Channel B jack.

The Kill toggle switches kill the dry signal input going into the pt2399 fx chip. It will however allow echo trails to keep going until they die out. So this is not just a mute switch to abruptly cut the echo trails in halfm which is potentaially better for live manipulation and recording.

The module also features onboard head phone monitoring. You can also use a JBL portable speaker or any other charger type portable speaker to hear your modular using a 3.5mm stereo cable. There is also a new spread parameter and fx bypass push button for live use.

width: 18hp
current: 10mA, -6mA
depth: 1.5 inches
FX Chip: PT2399.
Signal Levels for In/Outs: modular synth levels -5/+5.
Read more
 1 in stock $180.45
BLM Dwarf Star Stereo Delay Mk2 Module (B-STOCK)
Cat: 783152 Rel: 13 May 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Excellent stereo/dual mono delay module. CV inputs allow you to control the delay times independently, allowing for some creative modulation effects.

Supplier notes:
This module has two echo delay effect circuits based on the Dwarf Star Semi Modular system. With this module you can add cool delay fx to synth level signals. Each of the parameters has CV control with their own attenuators. There are three parameters per channel. The two echo fx circuits are mirrored on the front panel: Channel A and Channel B.

The fx processing was fine tuned for clean fx processing. You can however patch a cv input into the 'REPEAT' parameter, have the RCV attenuator fully clockwise, and force it to feedback into loud trash. There is no switch jack on the input jacks. However, all the CV jacks have switch jack internal connections. This allows you to modulated both channels using only the the Channel A side. For true independent patching on each separate channel simple patch something into the corresponding Channel B jack.

The Kill toggle switches kill the dry signal input going into the pt2399 fx chip. It will however allow echo trails to keep going until they die out. So this is not just a mute switch to abruptly cut the echo trails in halfm which is potentaially better for live manipulation and recording.

The module also features onboard head phone monitoring. You can also use a JBL portable speaker or any other charger type portable speaker to hear your modular using a 3.5mm stereo cable. There is also a new spread parameter and fx bypass push button for live use.

width: 18hp
current: 10mA, -6mA
depth: 1.5 inches
FX Chip: PT2399.
Signal Levels for In/Outs: modular synth levels -5/+5.
Read more
 1 in stock $180.45
BLM Europa VCO Module
BLM Europa VCO Module (synth module)
Cat: 775763 Rel: 13 May 20
 
VCO module
Notes: Alan R. Pearlman inspired system. Part of the BLM7200

The system only mimics the collection of sections from the 2600 to make a complete instrument.

(Discrete Tri Core) sine, ramp, square, triangle waves
Read more
MRP:$313.57 SAVE 21%
 1 in stock $248.19
Click for better price!
or call +44 20 7424 1960
quote 775763
BLM FM Joystick Pro V3 Module
Cat: 775744 Rel: 13 May 20
 
joystick module
Notes: This is a nice small joystick to add some control to your modular. The joystick is acting as an attenue-inverter. At center position is zero. Swinging the joystick side to side gives + or -. There are two attenue-inverters, one for each axis. When nothing is patched into the 'input' jack, the joystick is using an internal reference voltage (7v). You can use that to control a fitler module for example.When you patch a vco or lfo into the input jack you can add some fm to another external vco and have control over the FM with the Joystick.The joystick also has a push button. The gate out jack allow you to trigger your other modules that don't have manual trigger control.
Read more
MRP:$221.73 SAVE 22%
 1 in stock $173.84
Click for better price!
or call +44 20 7424 1960
quote 775744
BLM Harmonic Generator Module
Cat: 773975 Rel: 13 May 20
 
Sub-harmonic generator module
Notes: This is a VCO add on or helper. You patch a saw, square, triangle , or sine wave into the input jack. Now patch the output jack to a mixer module. For example you can use the Blue Lantern modules: Sir Mix Alot, Mix Em Up, or other third party mixers. You also patch one of the original waves from your vco (this is optional as you will still get audio results).

What you will hear with your gear is one supper fat mixture of harmonics. You have 4 knobs to mix in each harmonic.

The module can handle a full wide frequency spectrum.

The module is using CD4013 Flip Flop IC to do its 4 divider break down- there is no latency, no Atmega or STM issues
Read more
MRP:$85.28 SAVE 17%
 3 in stock $71.07
Click for better price!
or call +44 20 7424 1960
quote 773975
BLM Hermippe VCF Module
BLM Hermippe VCF Module (synth module)
Cat: 773986 Rel: 13 May 20
 
analogue filter module
Notes: This is an analog filter with a lot of low end. The design uses a JRC 13700 OTA dual vca chip to produce 12db Low pass and 12db high pass filtering. The module can easily self oscillate. There is a trimmer to adjust how much sine wave you want. There is a 2 channel internal mixer, so that you can patch two sound sources. There is a bi polar FM input, and a 'MOD' input with level control. These are used to voltage control the Cutoff knob.

The 'ping' input is a unique trigger conditioner that will send a spike to the filter. This is used to produce percussion type sounds from the output. This is used in combination with the Rez knob. The cutoff knob determines the sine wave frequency.
Read more
MRP:$143.01 SAVE 17%
 2 in stock $119.17
Click for better price!
or call +44 20 7424 1960
quote 773986
BLM Lunar Modulation Lab VCO Module
Cat: 774000 Rel: 13 May 20
 
VCO module
Notes: Typically excellent stuff from Blue Lantern Modules. Proper versatile VCO that also goes slow enough to handle LFO duties, with a wealth of FM, sync and modulation options plus sub-osc output.

Supplier's notes:
This product produces continuous wave forms that can be used as an LFO or audio rate VCO. There are 11 possible wave form outputs. This is a discrete, triangle core design based on the Bergfotron 'Advanced' VCO. This particular version uses a VCA based exponential converter for the core 1v per octave converter.

11 Wave Form Outputs: Ramp, Double Saw x2 Frequency, Sine with Level Out, Triangle, Saw, Even Harmonic, Pulse with PWM, Falling Stairs, Folded Triangloid, Pulse Train, Sub Generated Pulse Output (Divider)

Model: BLM Lunar Modulation Lab VCO
Analog Oscillator, LFO,VCO
Width: 18hp
Current: +91mA,-61mA


Read more
MRP:$405.41 SAVE 17%
 2 in stock $337.84
Click for better price!
or call +44 20 7424 1960
quote 774000
BLM Mix Em Up 8 Channel Mono Mixer Module
Cat: 775747 Rel: 13 May 20
 
mixer module
Notes: Alan R. Pearlman inspired system- part of the BLM7200
The system only mimics the collection of sections from the 2600 to make a complete instrument.

Audio Mixer, Noise Generator, Sample and Hold, Ring Mod (633 chip)

32 mm deep
Read more
MRP:$190.24 SAVE 22%
 1 in stock $148.69
Click for better price!
or call +44 20 7424 1960
quote 775747
BLM Phobos Lunar LFO V2.0 Module
Cat: 773981 Rel: 13 May 20
 
LFO module
Notes: This module contains about 5 modules in one. You get a lot of features. This is using a Phase Lock Loop based internal patch to create the oscillation (LFO). I then give you access to the clock divider used in the Phase Lock process.

This LFO can go audio rate or really slow using the toggle switch to decide LFO/HFO mode. There is an internal CV switch for you to select from 6 wave forms. The special wave form is the step generated wave. It sounds like a quantized ramp wave, and moves at half the overall internal lfo rate. There is a nice Level out knob to control the LFO wave output. This LFO has very HARD sync, that will reset the LFO.

The other half of this module contains a clock divider that also uses a CV selectable output. The clock divider can also go audio rate and sound like a sub harmonic generator when in audio rate. At very high frequencies (FREQ knob fully clockwise), the clock divider will lock up, this is due to the cmos chip.

The clock divider can be used with internal clock or external clock.

This is a fun performance type of lfo with just about all the features an LFO should have. There is 1v/ octave tracking of about 4 octaves when used as an oscillator. This product is for most part more of an LFO. The best patch one can do with this product is a 'cross' patch from the Phobos Lunar LFO, and have it patched to your Oscillator module. Then patch your oscillator to the CV waveform select on the Phobos.
Read more
MRP:$247.97 SAVE 17%
 1 in stock $206.64
Click for better price!
or call +44 20 7424 1960
quote 773981
BLM Simple VCLFO Module
BLM Simple VCLFO Module (synth module)
Cat: 775771 Rel: 13 May 20
 
LFO module
Notes: This is another analog lfo made specifically for those who may be on a really tight budget- this particular module is good for modulating your filter module or VCO module.
Read more
MRP:$111.52 SAVE 21%
 1 in stock $88.56
Click for better price!
or call +44 20 7424 1960
quote 775771
BLM Slim TPC VCO Module
BLM Slim TPC VCO Module (synth module)
Cat: 773995 Rel: 13 May 20
 
VCO module
Notes: This is an analog vco based on the Bergfotron Advanced VCO. It has heavy modification compared to other buchla vco's. It will track much better then the competition. Why? because this is using a VCA based tracking system instead of the matched transistor system. The 'Lock' switch allows for setting up your favorite reference Frequency. For example you can set it up on Zero Volts equals low Note 'C'.

You use this as a sound source.
You use this as a precision LFO.
You get a bonus analog sample and hold.

There are two possible sound source outputs:
-Wave Out. This has 8 possible wave shapes: Triangle, Saw, Double Saw, Pulse Width, Sine, Ramp, Even Harmonics, and Double Pusle wave. All of this is selected by push button. The selector circuit is using a Precision DG412 IC chip, so there is absolutely no bleeding. There is of coarse CV input for the selector (by Triggering).
All 8 waves are roughly -5/+5

-(Positive) Static Square Wave Out. This is a great clock source, it is also a great sync source for other products.

The analog sample and hold is using the internal VCO as the 'clock'. You simply patch a sound source on the 'input' and use the output to monitor the result. The (red knob) Tune knob above is used to control the S&H rate.

This product is the evolution of the 'Transistor Pyramid Core' saga.

WIDTH: 12HP
CURRENT: TBA
DEPTH: 1.5" Clearance, 1.3" min.

Two Stacker PCB manufacturing method.
1. Control PCB
2. CORE vco PCB
Read more
MRP:$360.80 SAVE 17%
 1 in stock $300.67
Click for better price!
or call +44 20 7424 1960
quote 773995
BLM Stereo Sir Mix Alot Module
Cat: 773987 Rel: 13 May 20
 
stereo synth level mixer
Notes: This module allows you to connect 6 channels of synth level Euro Format signals (-5/+5v) from your vco's or percussion modules. You then can pan left or right like normal desktop mixers. The final mixdown outputs are also synth level (-5/+5v). There are two send and returns which are also synth level (-5/+5v). There is no CV control of any kind. This is a basic stereo audio mixer.

Current: +37mA, -37mA

width: 24hp

Depth 1.5", PCB Stack Level: 1

D Shaft Metal Potentiometers.

Channels: 6, with panning on each channel.

Input gain: x10, synth level optimized.

Output: synth level optimized. Since there are master level knobs, one can attenuate for line levels.

Link ability: Yes, with 3.5mm stereo Y-cable. There is a jack labeled 'Stereo Link' where you can patch left and right synth level input signals.
Read more
MRP:$282.08 SAVE 17%
 2 in stock $235.07
Click for better price!
or call +44 20 7424 1960
quote 773987
BLM TW DCO Module
BLM TW DCO Module (synth module)
Cat: 773991 Rel: 13 May 20
 
DCO module
Notes: This is a digital vco with on board wave table and sub oscillator outputs that are audible.

The Tune Knob Parameter is Quantized. As you turn the knob it locks to musical chromatic scale.

This is an analog vco based on the Bergfotron Advanced VCO. It has heavy modification compared to other buchla vco's. It will track much better than other modules because this is using a VCA based tracking system instead of the matched transistor system. The 'Lock' switch allows for setting up your favorite reference Frequency. For example you can set it up on Zero Volts equals low Note 'C'.

You use this as a sound source.
You use this as a precision LFO.
You get a bonus analog sample and hold.

There are two possible sound source outputs:
-Wave Out. This has 8 possible wave shapes: Triangle, Saw, Double Saw, Pulse Width, Sine, Ramp, Even Harmonics, and Double Pusle wave. All of this is selected by push button. The selector circuit is using a Precision DG412 IC chip, so there is no bleeding. There is of coarse CV input for the selector (by Triggering).
All 8 waves are roughly -5/+5.

-(Positive) Static Square Wave Out. This is a great clock source, it is also a great sync source for other products.

The analog sample and hold is using the internal VCO as the 'clock'. You simply patch a sound source on the 'input' and use the output to monitor the result. The (red knob) Tune knob above is used to control the S&H rate.

This product is the evolution of the 'Transistor Pyramid Core' saga.

MODULE: TW DCO
DIGITAL OSCILLATOR, SOUND SOURCE

WIDTH: 6HP

CV Input sources:
Wave table CV
Sub Wave Selector CV
Detune CV
1v / Octave Pitch input CV

Outputs: Wave out, Sub out.
Read more
MRP:$164.00 SAVE 17%
 2 in stock $136.67
Click for better price!
or call +44 20 7424 1960
quote 773991
Blue Lantern Modules Dwarf Star Stereo Delay Mk2 Module
Cat: 774012 Rel: 13 May 20
 
stereo delay module
Notes: Excellent stereo/dual mono delay module. CV inputs allow you to control the delay times independently, allowing for some creative modulation effects.

Supplier notes:
This module has two echo delay effect circuits based on the Dwarf Star Semi Modular system. With this module you can add cool delay fx to synth level signals. Each of the parameters has CV control with their own attenuators. There are three parameters per channel. The two echo fx circuits are mirrored on the front panel: Channel A and Channel B.

The fx processing was fine tuned for clean fx processing. You can however patch a cv input into the 'REPEAT' parameter, have the RCV attenuator fully clockwise, and force it to feedback into loud trash. There is no switch jack on the input jacks. However, all the CV jacks have switch jack internal connections. This allows you to modulated both channels using only the the Channel A side. For true independent patching on each separate channel simple patch something into the corresponding Channel B jack.

The Kill toggle switches kill the dry signal input going into the pt2399 fx chip. It will however allow echo trails to keep going until they die out. So this is not just a mute switch to abruptly cut the echo trails in halfm which is potentaially better for live manipulation and recording.

The module also features onboard head phone monitoring. You can also use a JBL portable speaker or any other charger type portable speaker to hear your modular using a 3.5mm stereo cable. There is also a new spread parameter and fx bypass push button for live use.

width: 18hp
current: 10mA, -6mA
depth: 1.5 inches
FX Chip: PT2399.
Signal Levels for In/Outs: modular synth levels -5/+5.
Read more
MRP:$230.91 SAVE 17%
 3 in stock $192.43
Click for better price!
or call +44 20 7424 1960
quote 774012
Blue Lantern Modules Mini Shimmery Module MK2 Percussive Metallic Generator Module
Cat: 774004 Rel: 13 May 20
 
metallic generator module
Notes: Freshly updated to a more user-friendly and versatile MK2 form, this percussion module was always a great value and now even better. MK2 introduces layout changes, FM and easier tuning.

Supplier's notes:
There are 3 square wave oscillators that ring mod each other twice to produce 'shimmery' sounding tones or drones. The internal sound does not stop. When you patch from the 'drone' jack it is a constant sound. You use the A, B, and C knobs to tune each individual oscillator. Then you use the 'Tune' Knob to adjust all of the oscillators when you find that perfect sound. There is a TR influenced circuit that uses the abrupt dirty transistor vca to produce hi-hats or metallic percussion. I added the essential accent control to vary the amplitude. You need a gate or trigger signal from an lfo, etc, to activate the TR VCA portion of the module.

Otherwise if you want clean hi-fi sounding percussion from this unit, you patch from the 'Drone' jack to your hi quality ssm2164, or cool audio v2164 vca.

Model: Mini Shimmery Module MK2
Percussive Metallic Generator
Depth: 2.5 inches
Width: 10hp
Current: TBA
Colors: Matt Black
Read more
MRP:$156.13 SAVE 17%
 3 in stock $130.11
Click for better price!
or call +44 20 7424 1960
quote 774004
Blue Lantern Modules Velocity Amplifier Module
Cat: 775779 Rel: 13 May 20
 
velocity amplifier module
Notes: This module contains everything you need to complete an analog voice- all you need is a VCO for example. There is CV velocity for the filter, and CV velocity for the amplifier. You can create very dynamic sounding accents, and percussion sounds with this module.
Read more
MRP:$478.88 SAVE 20%
 1 in stock $381.57
Items 1 to 25 of 25 on page 1 of 1

Filter

Blue Lantern Modules
Release Date
Featured
Close