100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Bastl Instruments

View:
Options
Items 1 to 20 of 20 on page 1 of 1
Cat: 695389 Rel: 18 Jul 18
 
Passport 5V adapter
Notes: The coolest solution for +5V needy modules! Bastl's new tiny adaptor can convert +-12V from your power supply into +5V, and it can access the powerline on your bus board and feed all modules connected to it. Optionally it can feed only one single module through the in-built pin connector, while leaving the +5V line on your bus board untouched. In both situations it will perform flawlessly, and you can change the setting anytime with dedicated jumper.
Read more
 1 in stock $16.22
FORTHCOMING
Bastl Instruments 1983 Polyphonic MIDI To CV Module
Cat: 688796
 
MIDI to CV module featuring 4 channels of CV & Gate - 7HP
Notes: 1983 is a polyphonic MIDI to CV interface with creative voice allocation and automatic tuning capabilities. There are 4 channels of CV and GATE outputs that can be used in various layouts such as hybrid splits between monophonic and polyphonic voices or velocity, CC, aftertouch, triggers, clock or reset.

Each channel is able to LISTEN to the simple waveforms of the oscillators and with a single press of the TUNE button, it adjusts the CV outputs to the same tuning (such as A = 440 Hz in equal temperament or others). It also maps the response for all 7 octaves so all the oscillators are perfectly in tune with each other (and with other instruments). PURE MAGIC!

When the UPDATE jack is used, it forces the outputs to update only when a trigger is detected.

1983 always stores the notes played in a legato sequence in a buffer and the WINDOW jack allows for selecting which of these notes appear at the outputs.

This way the MIDI keyboard can be used as an input interface for harmonies and note sets that are further creatively processed with triggers and CV in the modular environment.

The TRANSPOSE jack shifts the outputs by semitones, fifths or octaves and the PORTAMENTO jack sets the glide time by CV.
Read more
e-mail me when released
coming soon $TBA
Cat: 670994 Rel: 21 Dec 17
 
Add-on module for the Bastl BitRanger
Notes: The BitBoard is a breadboard add-on module that allows users to build custom circuits and user interfaces for the BitRanger. It is solidly attached to the BitRanger and provides performance friendly stability.

It either comes just on its own, or with with 2 pots, 2 buttons and 4 switches which can help you to start designing your own bitRanger interface.

The BitBoard is closely linked to a project called OMSYNTH which is a breadboard based open modular synthesizer by Casper electronics. Several tutorials on how to make circuits are available on the OMSYNTH webpage.
Read more
 2 in stock $14.60
Cat: 616297 Rel: 12 Jul 16
 
Quad line output & headphones amp synth module - 5HP wide
Notes: CIAO !
Quad line output & headphones amp.

4 high quality line outputs for your modular in compact format. With line level clipping indication is handy for both recording and live. Headphone output can be quickly switched to listen to one of the stereo channels. It is also great for jamming because you can separately create a sound on your headphones and then flip a switch to mix it into the final mix directly with this module.
Read more
 2 in stock $150.28
Cat: 588591 Rel: 09 Nov 15
 
Voltage controller state variable filter (VCF) synthesiser module - 5HP wide
Notes: Cinnamon is a very unique sounding filter. The presence of drive and character switches makes it a multi-flavoured spice for your sound !
Read more
 1 in stock $132.97
Cat: 616305 Rel: 12 Jul 16
 
Guitar/instrument amplifier & interface for external effects processors like stomp boxes - 5HP wide
Notes: Hendrikson is a guitar/instrument amplifier and an interface for external effects processors like stomp boxes. The most unique feature is the mix output which is CV controllable crossfader between the signal that goes to the Output and signal that comes to the Input. This means that when used with external effects processor this gives CV control of one of the most important parameters - the Dry/Wet Mix. This is especially interesting when using with fuzz or distortion effects for waveshaping basic waveforms.

When Hendrikson is used just as guitar/instrument amplifier the mix out is in fact a VCA after the gain stage, so you can instantly create tremolo effects by plugging the CV to the MIX CV input.

Another great application of Hendrikson is CV controllable feedback loop of external effects chain. Simply route the signal from Mix Output back to the Output and listen what happens when the signal comes back thru the Input.
Read more
 1 in stock $136.22
Cat: 673083 Rel: 21 Dec 17
 
Compact MIDI modular synthesiser with 3 new synthesis modes
Notes: Kastle is a mini modular synthesizer with a headphone output, 2 in/out ports for interfacing other gear and it runs on just 3 AA batteries. It is DIY friendly and ideal for beginners in modular synthesis, but it will add some quite unique functionality to any modular synthesizer system. It delivers the fun of modular synthesis at a low cost and fits into your pocket so you can play it everywhere!

It has a unique digital lo-fi sound and it can be melodic as well as very noisy and drony, soft or harsh. It is designed to be fun on its own but it is most powerful when combined with other modular gear.

Kastle is an open source DIY project which runs on two Attiny 85 chips that can be reprogrammed with an Arduino (google: "programming Attiny 85 with Arduino"). One chip is dedicated to sound generation while the other one handles modulation. Several firmwares for the Attiny chips are available thru gitHub.

The v1.5 version combines a complex oscillator and LFO with stepped waveform generator.

The oscillator section has 3 sound parameters: PITCH, TIMBRE and WAVESHAPE - all under voltage control and with 6 different synthesis modes. It has a main output and a secondary waveform output. Both can be used independently or in combination. The 3 synthesis modes available thru the main output are: phase modulation, noise mode and track & hold modulation. There are 3 more modes on the secondary OSC output: phase distortion, tonal noise mode and formant synthesis. Each mode utilizes one or two oscillators. The PITCH parameter controls the main oscillator, the TIMBRE sets the PITCH of the modulating oscillator and the WAVESHAPE depends on the synthesis mode.

The voltage controllable LFO has a triangle and square output and a reset input. The stepped waveform generator is inspired by the Rungler circuit by Rob Hordijk. It can produce 8 different voltages either in random order or in 8 or 16 step looping patterns depending on how the BIT IN is patched.

In the box:

- Kastle synth
- 10 patch cables
- Sticker
Read more
 More than 10 in stock $95.14
Cat: 648904 Rel: 30 May 17
 
Audio click to modular clock/trigger converter
Notes: Klik is a synchronisation device that enables you to make analog, rock solid sync signals from your computer and your HW synths. The KLIK revives the old-school sync technique of using an audio track for synchronisation purposes. Record your synths exactly on the grid into your DAW while compensating for the latency of your sound card. Jam really tight between your computer and your HW and add groove to your clock.

The KLIK converts audio line level (or headphone) output signals from any sound card and makes perfect synchronisation pulses in the modular level.

KLIK converts two signals (left and right input) - typically clock and reset signal. The reset signal also has a button which you can use to re-sync your HW or use for sending manual gate signals. You can send rhythmical triggers thru the KLIK as well.

With KLIK you can use any channel of your soundcard or repurpose the unused headphone jack on your Macbook by creating aggregate device. Or use an old mp3 player as a stable clock source with presets!

And as a bonus if you run any audio signal thru the KLIK to apply a harsh bit-crushing effect!

Please note it is designed to only transmit clock/trigger/gate information. Its output is either low or high 0 or 5V. It doesn't output continuous CV signals.
Read more
 3 in stock $60.53
Cat: 696145 Rel: 18 Jul 18
 
Monophonic granular sampler with MicroSD card slot - Black Noir edition
Notes: MicroGranny 2 is monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.

Hand assembled instrument with full enclosure comes in printed gift box which includes:

- Assembled instrument - full enclosure
- 9V battery
- User manual
- Chain connectors
- Stickers
- MicroSD card with samples
Read more
 3 in stock $195.69
Cat: 694136 Rel: 29 Jun 18
 
Monophonic granular sampler with MicroSD card slot - transparent enclosure
Notes: MicroGranny 2 is monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.

Hand assembled instrument with full enclosure comes in printed gift box which includes:

- Assembled instrument - full enclosure
- 9V battery
- User manual
- Chain connectors
- Stickers
- MicroSD card with samples
Read more
 6 in stock $195.69
Cat: 588622 Rel: 09 Nov 15
 
Quad trigger to solenoid motor driver synthesiser module - 5HP wide
Notes: SOLENOID can drive 4 solenoid motors with voltage directly from the power supply. Motor driving circuitry and CV input circuitry are optically isolated without any ground connection. Requires external power supply for driving motors.

Output pulse width a knob optimizes the trigger signals to be sufficient to deliver adequate signal for the solenoids. With shorter pulses, solenoids don't move in their full range, or move with less power. This can also be used for adjusting the dynamics.
Read more
 1 in stock $122.17
Cat: 679973 Rel: 21 Feb 18
 
Push-button control for the Bastl Bit Ranger
Notes: The Synapsis is a 4x4 pushbutton matrix that offers performative control of the Bit Ranger.

There are 8 patch points connected to 4 rows (ABCD) and 4 columns (1234) of buttons. Pressing button A1 connects point A to point 1. A2 connects A to 2. B2 connects B to 2 and so on.

Package includes:

- The Synapsis
- 10 short + 10 long jumper wires
- Hex key

Using the Synapsis:

It is best used by dedicating rows to outputs (like divider or mix bits) and columns to inputs (like the byte section or inhibit points). In this configuration every possible combination of buttons will connect outputs to inputs and cause a change in the behaviour of the BitRanger. As always it is best to experiment and try new things.

Installing the Synapsis:

- Remove the screws from the bottom of the bit ranger and then remove the bottom plate.
- Remove the small section of plastic from the front edge of the face plate and place it somewhere safe. In newer models there is a slot in the middle of the bottom opening where the mini plate can be placed for storage.
- Screw the bottom plate back onto the BitRanger.
- Slide the Synapsis into the opening in the front.
- Place screws through the holes in the front of the bottom plate to secure Synapsis in place.

That's it!
Read more
 2 in stock $33.25
Cat: 670993 Rel: 21 Dec 17
 
Push-button control for the Bastl Bit Ranger
Notes: The Synapsis is a 4x4 pushbutton matrix that offers performative control of the Bit Ranger.

There are 8 patch points connected to 4 rows (ABCD) and 4 columns (1234) of buttons. Pressing button A1 connects point A to point 1. A2 connects A to 2. B2 connects B to 2 and so on.

Package includes:

- The Synapsis
- 10 short + 10 long jumper wires
- Hex key

Using the Synapsis:

It is best used by dedicating rows to outputs (like divider or mix bits) and columns to inputs (like the byte section or inhibit points). In this configuration every possible combination of buttons will connect outputs to inputs and cause a change in the behaviour of the BitRanger. As always it is best to experiment and try new things.

Installing the Synapsis:

- Remove the screws from the bottom of the bit ranger and then remove the bottom plate.
- Remove the small section of plastic from the front edge of the face plate and place it somewhere safe. In newer models there is a slot in the middle of the bottom opening where the mini plate can be placed for storage.
- Screw the bottom plate back onto the BitRanger.
- Slide the Synapsis into the opening in the front.
- Place screws through the holes in the front of the bottom plate to secure Synapsis in place.

That's it!
Read more
 1 in stock $33.25
Cat: 648908 Rel: 24 Apr 18
 
Digital tape effects unit
Notes: The Thyme is an effects processor that is best described as a sequenceable robot operated digital tape machine. With a lot of parameters at hand it enables the exploration of all the time based effects and the vast space in between their classical multi-effects categories (delay, phaser, reverb, chorus, pitch shifter, multi-tap delay, tape delay, tremolo, vibrato, compressor) and in stereo!

Each of the 9 different parameters (Tape Speed, Delay Coarse & Fine, Feedback, Filter, extra heads Spacing and Levels, Dry Wet Mix and Volume) has a dedicated, very flexible modulation source - called the Robot - which can be phased out differently for left and right channel to create psychedelic new sound effects. The Robot can either be an LFO with many different waveshapes, external CV source or an envelope follower to enable effects reacting to dynamics.

On top of everything there are 8 buttons to select a preset and those presets can be sequenced by a built in meta sequencer. The Sequencer, the Robots and the Delay can be synchronised to external or internal clock. Thyme interfaces with MIDI, analog clock and CV, it has a switchable stereo/mono input, stereo output, headphone output with level and foot switch jack.
Read more
 3 in stock $499.50
Cat: 688798 Rel: 10 Sep 18
 
Flexible dual waveform module - 7HP
Notes: Timber is very flexible wave shaping module that can produce rich timbres by adding harmonics to simple waveforms (triangles and sinewaves) or any other signal. It has 2 different unique wave shaping circuits - I. - the WAVE DRIVER and II. -the WAVE FOLDER and voltage-controlled crossfader to fade between the different circuits or between one of them and the clean input signal.

Both circuits share the same control voltages: the SHAPE which sets the input amplification before the wave shaping circuit and the SYMMETRY control which adds voltage offset to the input signal to provide various asymmetric overdrives or wave folding sounds. There is also voltage FBK CV jack which when provided with positive voltages feeds respective portion of the output signal back to the input which results in chaotic and aggressive behaviours. It is calibrated to work well with 5V gate voltages.

I. the WAVE DRIVER is an overdrive circuit with one folding stage and it has 2 configuration 3-way switches (9 different configurations). The drive switch can set the overdrive character to SOFT or HARD or something in between. The FOLD switch can set the folding threshold to HI or LO or it can turn the folding stage off in the NO position.

II. the WAVE FOLDER is a novel take on the serge style wavefolding circuit which has specific behaviour to abuse the high gain of the input amplification stage to provide rich high frequency timbres with higher settings of the SHAPE parameter. It has a configuration switch which can either activate clean 4 stage wavefolding in the OK position or highly asymmetric folding stage in the KO position that provides strange metallic character. The NO position provides only the very last overdrive-folding stage.
Read more
 2 in stock $203.26
Cat: 588628 Rel: 09 Nov 15
 
Broken contact emulator synthesiser module - 1HP wide
Notes: The broken cables and bad contacts are really vintage thing ! Which means sometimes you really want them. Sometimes you really need them ! And yes ! you can really love them!

This is why we carefully designed this 1HP broken contact emulator in form of 2x 4 way multiple!

It is not only a random type of generator to break your patches, it is also very usefull as a CABLE HANGER or as 1HP blank panel. And most of all... it is the ONE module you would love to talk about with your friends!

How to calibrate:

- the module cannot be mounted in the rack for successful calibration
- please don't use it uncalibrated
- Take a broken patchcable (works also with functioning one, but still...)
- push it thru the connector hole you want to calibrate
- keep moving the cable inside the hole to all sides
- keep putting it in and out until you get the feeling and broken-ness you desire
- repeat that process with all connector holes of the module
- note: each hole can and should be broken differently - but we leave that part of the process to your personal taste
Read more
 1 in stock $10.54
Cat: 648907 Rel: 06 Mar 18
 
Semi-modular light & sound synthesiser with fully analog core & signal path
Notes: SoftPop is a playfully organic, semi-modular light and sound synthesizer with wide variety of sounds: from random dripping water pops to heavy subtractive basslines. Its fully analog core consisting of a heavily feedbacked system of dual triangle-core oscillators, state variable filter and sample and hold is played through an intuitive interface of 6 faders that provide countless combinations which can be explored by anyone. It can also process external audio thru the filter while using the envelope follower to intuitively synchronise to the incoming signal. Extensive mini patchbay offers lots of reconfigurability and 3 jacks A,B,C can be used to send signals in or out of the patch bay. Battery operation, built in speaker and carrying handle make it the ultimate picnic boombox! The analog soul is enhanced by a quantize feature (auto-tune) and pattern generator with two memories A and B. For adventurous and courageous souls there is a secret chamber in the back for hacking & modding.
Read more
 3 in stock $343.81
Items 1 to 20 of 20 on page 1 of 1

Filter

Bastl Instruments
Release Date
Featured
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close