100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

AION Modular

Home  Labels  

AION Modular

Options
Items 1 to 13 of 13 on page 1 of 1
AION Modular 902 Voltage Controlled Amplifier Module
Cat: 780138 Rel: 08 Jul 20
 
Voltage controlled amplifier module
Notes: The AION MODULAR 902 VCA is an Eurorack clone of the classic Moog Modular 902.

The 902 is a Voltage Controlled Amplifier with balanced directly coupled inputs and outputs.

The 902 VCA can be used in any circumstances a voltage controlled variation of gain is desired.
Both audio or CV sources can be modulated by this module.

Both linear and exponential gain response are avaliable.

Specifications:
Power: +12 (50mA), -12 (30mA)
Depth: 20mm
Doepfer compatible

50 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$248.57 SAVE 19%
 1 in stock $200.55
Click for better price!
or call +44 20 7424 1960
quote 780138
AION Modular 904A Voltage Controlled Low Pass Filter Module
Cat: 780153 Rel: 08 Jul 20
 
Voltage controlled low pass filter module
Notes: The AION Modular 904A Low Pass filter is an Eurorack clone of the classic Moog Modular Low Pass filter (should not be confused with the Mini Moog Low Pass filter).

The 904A Low Pass filter attenuates frequencies above the Fixed Control Voltage (cutoff frequency) point at a rate of 24dB per octave. The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Regeneration knob (resonance) varies the amount of internal feedback, creating a resonant peak at the cutoff frequency.
The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
(sets the frequency band in two-octave steps)
1- 1Hz to 5kHz
2- 4Hz to 20kHz
3- 16Hz to 80kHz

Specifications:
Power: +12 40mA, -12 25mA
Depth: 40mm
Doepfer compatible

40 mA +12V
25 mA -12V
0 mA 5V
Read more
MRP:$332.75 SAVE 20%
 1 in stock $267.42
Click for better price!
or call +44 20 7424 1960
quote 780153
FORTHCOMING
AION Modular 904B Voltage Controlled High Pass Filter Module
Notes: The AION Modular 904B High Pass filter is an Eurorack clone of the classic Moog Modular High Pass filter.
The 904B High Pass Filter attenuates frequencies below the Fixed Control Voltage(cutoff frequency) point at a rate of 24dB per octave.

The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
LOW- 4Hz to 20kHz
HIGH- 10Hz to 50kHz

Specifications:
Power: +12 60mA, -12 50mA
Depth: 40mm
Doepfer compatible.

60 mA +12V
50 mA -12V
0 mA 5V
Read more
MRP:$332.75 SAVE 20%
coming soon $267.42
AION Modular 904C Filter Coupler Module
Cat: 780136 Rel: 07 Jul 20
 
Filter coupler module
Notes: The AION Modular 904C Filter Coupler is an Eurorack clone of the classic Moog Modular 904C.

The 904C Filter Coupler connects the 904A Lowpass and the 904B Highpass together to produce a Bandpass or a Band Reject filter response.

Bandwidth can be extended to three octaves and Center Frequency ranges from 5Hz to 20KHz. Both can be controlled manually or via control voltage.

The 904C provides a wide variety of signal processing and we strongly encourage experimentation but we advise to start with the following settings:

904A Fixed Control Voltage +6
904A Frequency Range 2
904B Fixed Control Voltage -1
904B Frequency Range LOW

The 904A and the 904B are required to use the 904C.
In the "OFF" position, the 904A and 904B are disconnected from the 904C an can be used independently.

The connection cables are provided with the module.

30 mA +12V
15 mA -12V
0 mA 5V


Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$331.43 SAVE 19%
 1 in stock $267.42
Click for better price!
or call +44 20 7424 1960
quote 780136
AION Modular 907A Fixed Filter Bank Module
Cat: 780134 Rel: 08 Jul 20
 
Filter bank module
Notes: The 907A Fixed Filter Bank is a non-voltage controlled modifier which emphasizes or reduces the gain of the center frequency bands indicated on each of the eight center pots, in addition to the cut-off points from low pass and high pass filters at either frequency extreme. A total of 10 overlapping filter networks are included.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$483.99 SAVE 19%
 1 in stock $390.17
Click for better price!
or call +44 20 7424 1960
quote 780134
AION Modular 911 Envelope Generator Module
Cat: 780140 Rel: 07 Jul 20
 
Envelope generator module
Notes: The AION MODULAR 911 Envelope Generator is an Eurorack clone of the classic Moog™ Modular 911.

The 911 Envelope Generator (ADSR) generates the Control Voltage contours required for producing envelopes in conjunction with a voltage-controlled amplifier or a voltage-controlled Filter.

Attack time (T1), Decay time (T2), and Release time (T3) are all independently variable over a 2 millisecond - 10 second range, making the module suitable for very fast percussive sounds or long and evolving sounds.

The 911 Envelope Generator can be triggered by an external gate signal via the Trigger Input or manually by a push button.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible
Read more
MRP:$248.57 SAVE 19%
 1 in stock $200.55
Click for better price!
or call +44 20 7424 1960
quote 780140
AION Modular 912 Envelope Follower Module
Cat: 780115 Rel: 08 Jul 20
 
Envelope follower module
Notes: The Envelope Follower produces two functions which can be used separately or in conjunction. The follower circuit Signal Input presents a control voltage output (DC) proportional to the average amplitude of the AC input signal. The second function, a Schmitt trigger, generates a V-trigger above a threshold voltage (comparator), when a slowly varying or DC voltage is introduced at the control input jack. The normalling of the control input of the follower circuit to the control input of the Schmitt trigger circuit allows both control voltage and trigger to be generated from a single variable source.

Specifications:
Power: +12 (40mA), -12 (8mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$269.62 SAVE 20%
 1 in stock $216.99
Click for better price!
or call +44 20 7424 1960
quote 780115
AION Modular 921 Voltage Controlled Oscillator Module
Cat: 780149 Rel: 07 Jul 20
 
Voltage controlled oscillator module
Notes: The AION 921 VCO is a variable waveform generator which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both fixed and variable levels can be obtained from the front panel output jacks. Nominal frequency and range controls (octave) are found at the top of the module.

Voltage controlled rectangular width (VC-PWM) is set by the knob in the upper center (left) with the accompanying voltage input jacks.
Multiple frequency control inputs 1 and 2 can be plugged into this module in parallel. Control input 3 is used via the pot for linear frequency response (Liniar FM). All waveform outputs can be used if desired.

This is what we consider an improved version of the Moog 921 VCO, not a direct clone. Improvements were made concerning tuning and stability issues.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Auxiliary outputs:
2 jacks (one normal, one inverted) with selected waveforms (sine, triangle, sawtooth, inverted sawtooth rectangular and inverted rectangular).
Waveforms amplitude controllable from 0 to maximum.

Hard and Soft synchronisation selectable via a switch.
Synch must be "OFF" (center position) when synchronisation is not beeing used, otherwise it will sound out of tuning.

Specifications:
Depth: 40mm
Doepfer compatible.

30 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$483.99 SAVE 19%
 1 in stock $390.17
Click for better price!
or call +44 20 7424 1960
quote 780149
AION Modular 921ABB Voltage Controlled Oscillator Bank Module
Cat: 780127 Rel: 07 Jul 20
 
Voltage controlled oscillator module
Notes: The AION 921ABB is a VCO-bank with two variable waveform generators which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both oscillators are controlled by the driver on the left side of the module. 3 control inputs for frequency and 2 control inputs for PWM, as well as manual operation for frequency and pulse width. Each of the two oscillators has a frequency adjust pot, an octave switch, the 4 waveform outputs and one exponential and one linear input for frequency control. A switchable synchronization input for each oscillator completes the operability.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Specifications:
Power: +12V (45mA) -12V (45mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$760.19 SAVE 19%
 1 in stock $612.66
Click for better price!
or call +44 20 7424 1960
quote 780127
AION Modular 923 Noise & Filters Module
Cat: 780146 Rel: 07 Jul 20
 
Noise & filters module
Notes: The AION MODULAR 923 Noise/Filters is an Eurorack clone of the classic Moog Modular 923.

The 923 Noise/Filters module provides a white noise and a pink noise source along with a manual Lowpass and a 6dB Highpass filter.

The two manual sweep filters, are single pole circuits with a frequency cutoff slope of 6dB per octave and a frequency range of 10Hz to 10KHz.

Any kind of noise color can be achieved using the white noise and filters together.

Specifications:
Power: +12 (35mA), -12 (35mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$263.04 SAVE 20%
 1 in stock $211.52
Click for better price!
or call +44 20 7424 1960
quote 780146
AION Modular 991 Filter & Attenuator Module
Cat: 780121 Rel: 07 Jul 20
 
Filter & attentuator module
Notes: The 991 contains 2 passive filters, one 6dB High Pass Filter and one 6dB Low Pass Fillter switchable in 6 positions. On the lower part of the module one finds an Attenuator. No power is required.

Specifications:
Depth: 30 mm
Doepfer compatible
Read more
MRP:$199.91 SAVE 19%
 1 in stock $161.10
Click for better price!
or call +44 20 7424 1960
quote 780121
AION Modular 995 Attenuators Module
Cat: 780130 Rel: 07 Jul 20
 
Attenuator module
Notes: The 995 Attenuator panel consists of three "passive circuits", each made of a 25k potentiometer between input and output. The signal input to the top attenuator is chained to the bottom two in series. Introduction of a plug into middle or bottom input breaks the normalling system: 1 to 1-2-3, 1-2 to 2-3, 1-2-3 to 1-2-3.
Read more
MRP:$117.05 SAVE 19%
 1 in stock $94.25
Click for better price!
or call +44 20 7424 1960
quote 780130
AION Modular CP3 Mixer Inputs Module With 2U-3U Adapters
Cat: 780123 Rel: 07 Jul 20
 
Mixer module
Notes: The CP3 module is a 4 x 1 mixer with positive and negative outputs and a maximum gain of two. This mixer can combine both AC and/or DC voltages. The module has a switch which, in the ON position, allows unwanted spikes to be removed from the waveforms. There is also a passive multiple.

Input Impedance: 25k ohms
Output Impedance: 100 ohms
S/N Ratios: better than 60dB
Read more
MRP:$339.32 SAVE 20%
 1 in stock $272.89
Click for better price!
or call +44 20 7424 1960
quote 780123
Items 1 to 13 of 13 on page 1 of 1

Filter

AION Modular
Release Date
Featured
Close