100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: DJ Equipment

View:
Options
Items 1,651 to 1,700 of 1,718 on page 34 of 35
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  33  34  35  »
Goldring E2 Replacement Stylus (replacement stylus)
Cat: 675771 Rel: 14 Feb 18
 
Stylus featuring Magnetic Duplex Technology
Notes: ***STYLUS ONLY***

The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of our Magnetic Duplex Technology and Goldring Expert Adjustment.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology:

All cartridges in the range feature Magnetic Duplex Technology - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.

Expert Adjustment:

The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever:

Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.

The E3 model with its refined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.
Read more
 2 in stock $55.72
Cat: 661383 Rel: 05 Sep 17
 
Stylus cleaning kit featuring brush & fluid
Notes: Even if you use your GrooveWasher to clean your records, room dust, lint and cat hair can accumulate on your stylus. Your stylus will "plow" out any debris that isn't removed from a record cleaning.

We sourced and tested dozens of brush styles, handle types and bristles. Straight "pencil" brushes. Artist camel hair brushes. Toothbrush styles. Mascara brushes.

We preferred a 90 degree angle. Long bristles so the brush can clean the underside of the cartridge as well as the stylus. Dense bristles to pull off gunky coatings but soft to avoid damage to the stylus or cantilever. Those are the effective cleaning features of our new stylus brush. This brush can be used dry or with a couple of drops of SC1 Fluid.

This kit includes our SC1 Stylus Fluid. It's a cousin of our G2 Fluid with a bit more organic alcohol. The stylus can become clogged with oily pressing release compound from new records and residue from other record cleaning and preservative fluids. SC1 Stylus Fluid dissolves these contaminants and the SC1 Brush removes them.

Note: Hard surface cleaning fluids like G2 and SC1 can be irritating to skin and eyes. Avoid contact with your eyes. Flush with clean water. Keep all cleaning products out of the reach of children.
Read more
$18.08 SAVE 10%
 9 in stock $16.27
Cat: 641017 Rel: 20 Feb 17
 
Replacement stylus for ATN3600
Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.
Read more
 9 in stock $6.15
Cat: 641018 Rel: 14 Mar 17
 
Replacement stylus for Panasonic EPS24CS
Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.
Read more
 6 in stock $5.77
Cat: 641027 Rel: 14 Mar 17
 
Replacement stylus for Panasonic EPS270
Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.
Read more
 2 in stock $7.63
Cat: 641026 Rel: 08 Jun 17
 
Replacement stylus for Panasonic EPS30
Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.
Read more
 3 in stock $6.86
Cat: 641022 Rel: 14 Mar 17
 
Replacement stylus for Sanyo ST09
Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan. Fits many popular DJ turntable including ION USB and Newmark USB.
Read more
 4 in stock $7.41
Cat: 641024 Rel: 14 Mar 17
 
Replacement stylus for Sanyo STG5
Notes: Replacement stylus for Sanyo STG5, also compatible with Denon DSN45. Made in Japan.
Read more
$4.40 SAVE 20%
 3 in stock $3.52
Cat: 634948 Rel: 23 Dec 16
 
Plate cover designed for Technics 1200/1210 MK3 & MK5 turntables - grey
Notes: Built from mild steel, laser cut and CNC folded, and welded to leave a seamless join. MK top plates are powder coated with a hard wearing finish. Easy to clean, the top plates help to protect decks from being marked. Just take the hinges off your deck and slip your top plate over.

Please note; the rear hinges must be removed before putting on the top plate. The hinges can be left off or put back after installation.
Read more
 2 in stock $96.95
Nagaoka AM801 Stylus Cleaner (stylus cleaning fluid)
Cat: 567495 Rel: 27 May 15
 
Stylus cleaning formula, for dissolving substances caught on the stylus tip
Notes: Your phonograph stylus also needs cleaning and care. Due to air pollution caused by both outside influences (traffic) and domestic influences (kitchen, smoking) a sticky film is deposited over time on to your records.

During playback the stylus will scrape this deposit from the groove which in turn causes a sticky film to form around the stylus tip which in turn traps other dirt and dust found on your record. This easily visible thick deposit not only influences the quality of the sound but may even cause damage to your favorite records.

The special formula of the Nagaoka AM-801 efficiently dissolves all the sticky substance caught on the stylus and removes this as well as the dirt trapped.
Read more
 2 in stock $18.25
Cat: 567540 Rel: 26 Mar 15
 
Pack of cartridge mounting screws, varying sizes
Notes: Nagaoka BN-7S

This pack includes

M2.6 x 3mm 4 each
M2.6 x 6mm 2 each
M2.6 x 8mm 2 each
M2.6 x 10mm 2 each
M2.6 x 12mm 2 each
M2.6 x 14mm 2 each
M2.6 x 18mm 4 each
M2.6 Nut 4 each
Nylon Washer 4 each
Read more
 1 in stock $15.80
Cat: 567650 Rel: 26 Mar 15
 
Replacement JNP100 stylus with spherical tip and aluminium alloy cantilever
Notes: Replacement JNP100 stylus with spherical tip and aluminium alloy cantilever.

Fits MP100 cartridge.
Read more
 2 in stock $58.81
Cat: 567651 Rel: 26 Mar 15
 
Replacement JNP110 stylus with elliptical stylus and aluminium alloy cantilever
Notes: Replacement JNP110 stylus with elliptical stylus and aluminium alloy cantilever.

Fits MP110 cartridge.
Read more
 3 in stock $65.35
Cat: 640563 Rel: 14 Feb 17
 
Set of 4 high-quality damping feet - black
Notes: Audio components can be sensitive to mechanical vibration, which limits their high-fidelity performance. To keep it from your valuable equipment, Absorb It feet are the perfect solution. Especially designed for turntables, all disc players, tube amplifiers and other components, which might be sensitive to vibrancy and are positioned on high vibrating surfaces like glass, thin wood panels and metal. Place Absorb It underneath the original feet of each unit and transmission of vibration will be avoided. With Absorb It you can play up to 30% louder without the risk of acoustical feedback.

Typically, surfaces are excited by speakers, subwoofers or simply by low frequency emission caused by traffic of cars and trains and transformers. Almost all feet of audio devices, like turntables, amplifiers, disc players are not designed for sufficiently isolating from frequency ranges, that really matter. Absorb It consists of high-tech synthetic rubber material, that dampens a wide frequency range from infrasonic to 500 Hz and therefore effectively prevents transmission of structure-born sound. It works like an electronic "subsonic" filter, but without having their assets and drawbacks. It is solidly built and can be used for any sensitive equipment with 3 or 4 feet and even with high mass units up to 64 kg!
Read more
 1 in stock $135.08
Cat: 428823 Rel: 01 Jul 14
 
Anti-static stylus cleaner brush
Notes: Carbon fibre anti static stylus cleaning brush from Pro-Ject for getting dust and debris off of your stylus.



Read more
 2 in stock $11.16
Cat: 640566 Rel: 07 Mar 17
 
Cork turntable mat for enhanced sound quality & reduced static electricity
Notes: Sound tuning through platter mat replacement! The interaction between the record and the surface can be tracked very easily by the sensitivity of a good pick up cartridge.

Common felt mats give a smooth contact between record and platter but have the disadvantage of static. This means that felt mats often collect a lot of dust which can be then transferred to the record. Also, the damping ability is very limited which can be a problem with metal platters. Thick rubber mats overdamp the record and have an isolation effect which leaves static on the record - hearable noise clicks are the result.

Leather and Cork are 2 different but very interesting options to upgrade the sound quality. Resonances are damped more effectively than felt, they keep dust away and also avoid static.

Which is better largely depends on taste and the actual platter design. These mats are a very cost effective way to improve the sound and have less noise by static and dust. You can hear a difference!
Read more
 2 in stock $20.70
Cat: 630001 Rel: 07 Mar 17
 
Stable, height-adjustable support platform for turntables & other equipment
Notes: Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vibrations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.
Read more
 2 in stock $124.78
Cat: 519527 Rel: 07 Feb 14
 
Replacement stylus for M78S cartridge
Notes: Stylus for wide groove/78 RPM recordings and for Shure M78S phonograph cartridge.
Read more
 2 in stock $43.08
Cat: 210181 Rel: 04 Mar 06
 
Replacement stylus for M92E cartridge
Notes: A Shure replacement stylus for the Shure M92E will restore your Shure cartridge to its originally specified performance levels.
Read more
 2 in stock $29.40
Cat: 591333 Rel: 05 Nov 15
 
Cartridge accessory pack includes mounting hardware, wires, screwdriver, cleaning brush & stylus guard
Notes: The Shure RPP644 includes accessories for the M44G and M44-7 cartridges. This pack includes mounting hardware, head-shell wires, screwdriver, cleaning brush and stylus guard.
Read more
 4 in stock $7.61
Cat: 237073 Rel: 27 Oct 06
 
Stylus tracking gauge for all modern tone arms & automatic turntables
Notes: The Shure SFG-2 Stylus Tracking Force Gauge is the industry standard. This simple-to-use measuring device was developed to give listeners a way to insure against the problems caused by improper tracking force settings, which include mistracking, excessive record and tip wear, and poor sound reproduction.

This gauge is a highly accurate beam balance instrument designed to measure the actual downward force exerted by a stylus on a record over the range of 0.5g to 3.0g. Each gauge is individually calibrated and displays readings in 0.05g increments in order to provide a precise measurement of stylus tracking force.

It is solidly built and user-friendly, and there's even a small mirror to help you seeing when the scale is in perfect equilibrium.

Read more
 2 in stock $32.45
Cat: 567729 Rel: 27 Mar 15
 
Leather turntable mat for isolation of vinyl from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 2 in stock $21.78
Tonar Cartridge Alignment Protractor (cartridge alignment tool)
Cat: 567734 Rel: 27 Mar 15
 
Cartridge alignment tool for proper setting of your cartridge offset and overhang
Notes: This cartridge alignment protector allows the proper setting of the cartridge offset and overhang
Read more
 2 in stock $12.56
Cat: 567666 Rel: 26 Mar 15
 
High quality carbon fibre stylus tip cleaning brush
Notes: Clean tip carbon fiber stylus cleaner
Read more
 2 in stock $7.95
Cat: 567726 Rel: 27 Mar 15
 
Cord & rubber turntable mat for isolating vinyl from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically.
Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm
- Thickness 3 mm
Read more
 2 in stock $21.78
Cat: 690132 Rel: 18 May 18
 
Spirit level designed for turntables
Notes: A turntable on a slope is not good, it can affect the performance of your tonearm, making it prone to jumping and skipping. This simple but effective level from the experts at Tonar will tell you if your turntables are mounted on a flat surface for optimal performance.
Read more
 2 in stock $9.53
Cat: 690133 Rel: 18 May 18
 
Spirit level designed for turntables
Notes: A turntable on a slope is not good, it can affect the performance of your tonearm, making it prone to jumping and skipping. This simple but effective level from the experts at Tonar will tell you if your turntables are mounted on a flat surface for optimal performance.
Read more
 2 in stock $25.04
Cat: 567749 Rel: 24 Mar 15
 
Adhesive universal isolation foot pads for turntables, isolate your turntable from external vibrations
Notes: Universal isolation foot pads for turntables, isolate your turntable from external vibrations.

This product comes in a pack of 8 pads, enough for 2 turntables.
Read more
 1 in stock $16.87
Cat: 567662 Rel: 24 Mar 15
 
Static electricity and dust removal arm tool, with carbon fibre brush and sliding weight for force adjustment
Notes: The Nostatic Arm is the modern version of the formerly well known "Dust Bug" by Cecil Watts. The Nostatic arm incorporates a carbon fiber brush that removes the static electricity from the record during playback, and at the same time picks up the loose dust before the stylus reaches that part of the record. The Nostatic arm has an earth wire which is connected to the earth of the record player or the amplifier.

The height can be easily adjusted to fit most record players. It also has a sliding weight in order to adjust the "dusting force" of the brush. Finally the base of the brush has sticky tape so if preferred it can be stuck to the surface of the record player for easy use.
Read more
 2 in stock $18.51
Cat: 567724 Rel: 27 Mar 15
 
High quality cork turntable mat for better isolation of the record from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 2 in stock $14.60
Cat: 567728 Rel: 27 Mar 15
 
White perspex turntable mat for isolation of the record from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 2 in stock $19.60
Cat: 683835 Rel: 27 Mar 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 1 in stock $16.21
Cat: 567667 Rel: 27 Mar 15
 
Basic stylus cleaning brush for protecting your stylus & prolonging the life of your vinyl
Notes: Basic stylus cleaning brush for protecting your stylus & prolonging the life of your vinyl
Read more
 3 in stock $2.17
UDG
Cat: 403514 Rel: 07 Sep 10
 
Nylon 12" turntable dust cover, black with white UDG logo
Notes: Designed for 12" turntables, the UDG turntable dustcover is made of a special hi-tech T-woven nylon breathable mesh that's guaranteed to protect your turntable from dust or dirt. It is quick and easy to slip on or off. The cover also works very well on many models of CD players and mixers.
Read more
 2 in stock $16.61
Cat: 600014 Rel: 08 Sep 16
 
Resonance dampening, anti-static cork turntable mat
Notes: The Vinyl Styl 12" Anti-Static Cork Turntable Mat is designed to improve overall sound quality, dampen vibrations, and provide a no slip surface that audiophiles will be sure to appreciate. It also features a label recess for extra protection.

- Resonance dampening
- Anti-static
- No-slip grip
- Improves vinyl playback quality
Read more
 1 in stock $14.98
Cat: 644180 Rel: 23 Mar 17
 
Anti-static vibration damping grip mat - black
Notes: Wooden Bull Audiophile Turntable Mats combine the best qualities of leather and cork to create a superior mat for your turntable. Gluing the leather to the cork serves to completely flatten the leather surface. The flatness of the surface combined with the texture of the leather creates a surface that holds your vinyl records firmly and improves drive through the stylus.

The Regular design can be used in conjunction with a clamp if desired.

Placing the middle finger of your left hand on the edge of the record and moving the record forwards and backwards you will feel the whole platter move with it. This extra grip combined with the excellent vibration damping provided by the cork are the characteristics that make the Wooden Bull a great addition to any good quality turntable.

Gluing the leather to the cork also serves to completely eliminate air pockets that can be present under standard leather mats. These air pockets can result in tiny yet audible pops and clicks on playback.
Read more
 3 in stock $53.37
Cat: 637072 Rel: 11 Jan 17
 
Wireless microphone system with fixed UHF transmitter & half rack-width receiver
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

Available with either a handheld microphone or bodypack transmitter.
Read more
 1 in stock $56.66
Cat: 637073 Rel: 11 Jan 17
 
Wireless microphone system with fixed UHF transmitter & half rack-width receiver
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

Available with either a handheld microphone or bodypack transmitter.
Read more
 2 in stock $56.66
Cat: 637074 Rel: 25 Jan 17
 
Wireless microphone system with fixed UHF transmitter & half rack-width receiver
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.
Read more
 1 in stock $63.52
Cat: 637075 Rel: 25 Jan 17
 
Wireless microphone system with fixed UHF transmitter & half rack-width receiver
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.
Read more
 1 in stock $63.52
Cat: 637068 Rel: 11 Jan 17
 
Dual wireless microphone system with fixed UHF receiver & 2 transmitters
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

Available with either a handheld microphone or bodypack transmitter.
Read more
 1 in stock $95.85
Cat: 637070 Rel: 25 Jan 17
 
Dual wireless microphone system with fixed UHF receiver & 2 transmitters
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.
Read more
 1 in stock $86.47
Cat: 670137 Rel: 10 Nov 17
 
Ultra portable UHF wireless system
Notes: Portable UHF wireless microphone system with neckband mic and beltpack transmitter, supplied with a portable beltpack receiver and over-ear headphones. The receiver can be connected to any line input for regular wireless microphone operation or as a wireless link to an active speaker. Two selectable carrier frequencies give the option of 2 systems working independently in the same area or the ability to switch between 2 sets of listeners. Additionally, a hot-shoe adaptor is provided for mounting to a camera for broadcasts and video presentations. A super versatile wireless set that can also form part of a larger system when extended with additional transmitters and receivers (available separately).
Read more
 1 in stock $80.60
Cat: 637064 Rel: 11 Jan 17
 
Single channel PLL tuneable UHF wireless system with handheld microphone
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories. The RF carrier frequency is selected on the receiver and synchronized to the transmitter via infra-red at the touch of a button. Up to 4 RU105 systems can be operated together on the EU licence-free band.
Read more
 2 in stock $82.94
Cat: 704585 Rel: 12 Feb 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The ultimate freedom to perform is within your grasp.

The VHF-01 single-channel wireless system offers crystal clear clarity, exceptional sound quality with many more added advantages for the best price in the market. Embrace the freedom from dangling wires and limited mobility. Perform to your heart's content to impress the audience with energy.

The top-notch technology featured in the VHF-01 single-channel wireless system is unbeatable. The dual configuration mechanism that is ultra-versatile offers you the opportunity to use any of the prevailing applications in the industry without a hassle. The hardware component of the VHF-01 single-channel wireless system comprises of a unidirectional microphone. This mic features an ultra-sensitive cardioid capsule that plays a key role in reproducing voices. This is not the only reason that makes the VHF- system perfect for singers, DJs, and others who require a high-quality voice amplifier. Special inbuilt noise absorption techniques available in the mic help to deliver a clear and undisrupted voice to the audience. This is why our product is trusted by renowned artists, public speakers, audio service providers, DJs, presenters, lecturers and many other professionals throughout the country.

One of the key features of the VHF-01 system is its superior quality (single channel) VHF receiver with a 100-feet operating range. This microphone system stabilizes within the frequency range 170-260 MHz. The output level is optimized with the single channel volume rotary control mechanism to provide an unbeatable experience each time you make use of this dynamic single-channel wireless system. Monitoring the signal strength of the sound is not an issue because of the straightforward super bright RF LED indicators that indicate the signal strength for your convenience. In addition, the standard 14-inch unbalanced output jack makes it even easier to use the VHF-01 system wherever you go whenever you need.

Make your next public appearance on stage a better experience for yourself and your audience with the top-notch VHF-01 single-channel wireless system.
Read more
 1 in stock $52.69
Cat: 696956 Rel: 12 Feb 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The ultimate freedom to perform is within your grasp.

The VHF-01 single-channel wireless system offers crystal clear clarity, exceptional sound quality with many more added advantages for the best price in the market. Embrace the freedom from dangling wires and limited mobility. Perform to your heart's content to impress the audience with energy.

The top-notch technology featured in the VHF-01 single-channel wireless system is unbeatable. The dual configuration mechanism that is ultra-versatile offers you the opportunity to use any of the prevailing applications in the industry without a hassle. The hardware component of the VHF-01 single-channel wireless system comprises of a unidirectional microphone. This mic features an ultra-sensitive cardioid capsule that plays a key role in reproducing voices. This is not the only reason that makes the VHF- system perfect for singers, DJs, and others who require a high-quality voice amplifier. Special inbuilt noise absorption techniques available in the mic help to deliver a clear and undisrupted voice to the audience. This is why our product is trusted by renowned artists, public speakers, audio service providers, DJs, presenters, lecturers and many other professionals throughout the country.

One of the key features of the VHF-01 system is its superior quality (single channel) VHF receiver with a 100-feet operating range. This microphone system stabilizes within the frequency range 170-260 MHz. The output level is optimized with the single channel volume rotary control mechanism to provide an unbeatable experience each time you make use of this dynamic single-channel wireless system. Monitoring the signal strength of the sound is not an issue because of the straightforward super bright RF LED indicators that indicate the signal strength for your convenience. In addition, the standard 14-inch unbalanced output jack makes it even easier to use the VHF-01 system wherever you go whenever you need.

Make your next public appearance on stage a better experience for yourself and your audience with the top-notch VHF-01 single-channel wireless system.
Read more
 1 in stock $44.85
QTX
Cat: 652978 Rel: 01 Jun 17
 
Dual channel wireless microphone system
Notes: A dual channel VHF wireless microphone system with a half-width 1U receiver and 2 handheld transmitters.

- Up to 50m range
- Supplied with batteries and jack lead
- Note: Maximum of 2 VHF frequencies can be operated in combination
Read more
 1 in stock $40.29
QTX
Cat: 673263 Rel: 15 Dec 17
 
Handheld microphone for QRPA & QXPA
Notes: Handheld wireless microphone as alternative or replacement for QTX portable PA units. Available in VHF for QRPA and QXPA or UHF for QXPA-plus.

VHF models for use with QRPA and QXPA
UHF models for use with QXPA-plus and PAV8
Read more
 1 in stock $23.42
QTX
Cat: 673264 Rel: 18 Dec 17
 
Handheld microphone for QRPA & QXPA
Notes: Handheld wireless microphone as alternative or replacement for QTX portable PA units. Available in VHF for QRPA and QXPA or UHF for QXPA-plus.

- VHF models for use with QRPA and QXPA
- UHF models for use with QXPA-plus and PAV8
Read more
 1 in stock $23.42
QTX
Cat: 696612 Rel: 18 Dec 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Handheld wireless microphone as alternative or replacement for QTX portable PA units. Available in VHF for QRPA and QXPA or UHF for QXPA-plus.

- VHF models for use with QRPA and QXPA
- UHF models for use with QXPA-plus and PAV8
Read more
 1 in stock $18.95
Items 1,651 to 1,700 of 1,718 on page 34 of 35
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  33  34  35  »

Filter

Back Catalogue: DJ Equipment
Release Date
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close