100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

View:
Options
Items 1 to 13 of 13 on page 1 of 1
Cat: 689667 Rel: 14 Jun 18
 
Probabilistic & pingable burst generator - 8HP
Notes: Burst is a Pingable Trigger Burst generator with distribution, probability and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets and true polyrhythms for your modular system.

The module allows you to add voltage controlled redrums and dynamic ratcheting effects for your patches. In addition, Burst works like a regular clock source and trigger for other modules via its Tempo and End of Cycle outputs.
Read more
 2 in stock $181.63
Cat: 668637 Rel: 09 Nov 17
 
6-channel performance mixer with EQ's & mutes
Notes: Hex mix VCA is a compact six channel VCA with an unique response curve range from logarythmic to linear and to exponential using a pot.

All outputs are routed to output six to act as a mixer, with a normalization of each one to remove each VCA from the Mix.

Hexmix VCA can act as six independent VCAs as well as a Mixer for all the inputs (Selectable via a switch). Featuring an internal connection to interface with our Hexmix system.

Every VCA has a response pot for the incoming CV, being full logarythmic at maximum setup and full exponentiall at minimum setup, having the linear response in the centre position.

The pot provides the full range of responses to adecuante to our prefered application, such as percusive sounds or panning effects.

Level pot of each channel is an attenuator of the signal coming out of each VCA.

Jacks are normalled to 10 volts, so when we have no CV present VCA would be fully open and our Level pot will act as a volume.
Read more
 1 in stock $298.39
Cat: 670606 Rel: 11 Jan 18
 
6-channel performance mixer with three band EQ, mute & pan - 28HP
Notes: Hexmix System is a six channel performance mixer specially designed for Eurorack.

The system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.

The mixer has a strong inspiration in classical DJ mixers, providing sharp EQ's for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.

The unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.

The system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a conventional tabletop mixing deck.

This is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.

Inputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA, you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.

Each Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.

Gain is set to unity, so it will act as an attenuator of the input signal. Mutes are clickless, as they are vactrol based. This circuit provide some decay on the mutes, rather than a sharp cut.

Switches have latch position and momentary ones to unmute the channel, providing some really nice performative capabilities.

EQs are quite sharp (12dB) inspired in classic DJ mixers to aggressively cut selected frequencies.

Master section has its own EQ and volume control for the mix of all channels. Master EQ is software than individual channel's (6dB) and it's meant to provide control over the final mix.

It's possible to change output level from line to synth with a switch located in the back.

This will be pretty useful when used in combination with Hexpander, that provides a balanced out at line level. Like this it's possible to have a mix at synth level to re-route the master signal while having an output to PA.
Read more
 4 in stock $441.12
Cat: 670607 Rel: 10 Jan 18
 
Expander module for the Befaco Hex Mix
Notes: Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel, complete PFL system and balanced output.

Hexpander is designed to be placed on top of Hexmix. Expanding Eurorack concept to 6u, allows every channel to be aligned as in traditional tabletop mixers.

Auxiliar sends:
For every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.

Every auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal both pre or post fader/EQ at the same time, allowing to patch externally depending if its desired to have the original signal, or the signal after being EQ'ed on the effect.

Returns are stereo, having a switch to select if the signal is coming from synth or line level. Like this, levels can be set, for example, either for a guitar pedal or a FX module at synth level.

Monitor section:
Hexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.

Flip PFL switch to send that channel to the headphones out.

With PFL/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.

Level meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.

Output section:
Every channel has individual 6,5? jacks out at line level. Here you have the signal of every channel post EQ.

As an addition, you have master balanced output.
Read more
 4 in stock $334.08
Cat: 668578 Rel: 09 Nov 17
 
Instrument/signal processor module - 11HP
Notes: There may come a time when you want to marry the rest of your rig with your Eurorack system. The Instrument Interface (I2) is designed to take a wide range of signals and transform them into a set of useful Eurorack compatible voltage levels.

The module uses an envelope follower circuit to achieve direct control of the amplitude of any incoming signal, producing a control voltage proportional to its amplitude. This allows a real and direct communication between external sound sources and Eurorack systems.

The Instrument interface module has the following functional blocks:

Preamp:
With two audio inputs (6.5mm jack and Mini-jack), amplification of the input signal is controlled by the "Gain" pot.

The minimum signal required to generate the maximum envelope is 200mV peak and allows up to 5v input.

BPF:
The signal will then pass thru a band pass filter with cut-off frequency and bandwidth control via "Freq" and "Width" pots. This will set the frequency range of our control signal.

After this stage the signal can be accessed at synth level via "Audio Out".

Env. Follower:
After filtering the signal it will feed into the "Response" stage which determines the envelope follower's response velocity. It features a "High", "Medium" and "Low" selector switch to achieve the optimal envelope for different kind of signals. "Follo Out" will output the extracted envelope and has a level indicator LED. Green: Medium level; Orange: High level; and Red: Max. Level.

Env. Regenerator:
"Rege Out" is a regenerated envelope that allows independent control of the rise part of the envelope with the "Attack" knob, and the fall part with the "Decay" knob.

The Envelope Regenerator also features an LED indicator for the regenerated envelope level. Green: Medium level, Orange: High level, Red: Max. Level.

Trig. Extractor:
With the "Threshold" pot we can control the level of a comparator that determines when "Gate Out" and "Trigg Out" outputs will be activated.

"Gate Out" is active while the envelope is over the threshold we set, while "Trigg Out" is activated just when the threshold is passed.

Indicator LEDS show when the outputs are active.
Read more
$201.09 SAVE 20%
 1 in stock $160.87
Cat: 668629 Rel: 09 Nov 17
 
2 axis CV generator/attenuverting joystick
Notes: The Joystick is a compact two axis attenuverting (attenuator-inverter) joystick controller.

The Joystick features a robust arcade style joystick for manually generating either CV with Range and Offset control or attenuating two input signals. It also includes two push buttons to manually generate gates.

- Current needs: +12V: 25mA, -12V: 10mA
- Width: 12 HP
- Depth: 35 mm (inc. power connector)
Read more
 1 in stock $150.27
Cat: 668626 Rel: 09 Nov 17
 
Quad MIDI to CV converter - 6HP
Notes: MIDI Thing is a compact 4 channel MIDI to CV/Gate interface featuring 12 bit conversion that allows V/Oct control with around 1 cent precision.

MIDI Thing offers four different functional modes:

- Mono: One MIDI channel - Pitch, velocity, bend, modulation & gate
- Duo: Two MIDI Channels - 2x Pitch, velocity & gate
- Multi: Four MIDI Channels - 4x Pitch & gate
- Drum: Eight trigger outputs

All modes have Clock and ST/SP outputs.

- Current needs: +12V: 32mA, -12V: 8mA
- Width: 6 HP
- Depth: 30 mm (inc. power connector)
Read more
 2 in stock $204.33
Cat: 668605 Rel: 09 Nov 17
 
Four channel active mixer module
Notes: A four channel active mixer, suitable for audio or control signals.

It features regular and inverted outputs as well as an LED level meter.

- Current needs: +12V: 14mA, -12V: 11mA
- Width: 8 HP
- Depth: 50mm (inc power connector)
- Aluminium, heat-treated front panel
Read more
 2 in stock $90.81
Cat: 713608 Rel: 14 Jun 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Befaco's new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal.

Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced.

A Headphones out is available. You can route Headphone OUT to the main out or an independent signal with CUE switch. Like this you can either pre-listen your sounds with the CUE Input or listen to your main out without disturbing your neighbours!

Level LEDs are available to monitor levels of each signal on the module.
Read more
 1 in stock $129.74
Cat: 668585 Rel: 09 Nov 17
 
Dual complex function generator
Notes: The Rampage is Befaco's approach to an old invention: the Serge/Buchla ramp generator.

Befaco took the idea of a "patch programmable" function generator/processor, put two units in the same module and expanded them with new functions and ways to combine them: Slope detectors, analogue logic functions and evolved outputs.

The module is built around two voltage controlled integrators. Integrators (also known as Lag Processors or Slew limiters) allow you to process your voltages, converting sharp square waves in ramp-like waveforms.

These lovely devices can, for instance, convert a gate signal into a simple envelope, or achieve a "portamento" or "glide" effect when applied to pitch CV.

Another useful application of an integrator is its ability to low-pass filter an audio signal.

- Current needs: +12V: 110mA, -12V: 90mA
- Width: 18 HP
- Depth: 30 mm (inc power connector)
- Aluminium, heat-treated front panel
Read more
 1 in stock $269.21
FORTHCOMING
Befaco Stmix 4 Channel Stereo Mixer Module (assembled)
Cat: 716763 Rel: 01 Feb 19
coming soon $201.09
Cat: 668622 Rel: 09 Nov 17
 
Compact, well-equipped envelope module - 8HP
Notes: The VC ADSR is our take on the classic ADSR: now smaller, more powerful and user friendly.

The circuit is based in a dual transistor "Current Mirror" (a voltage controlled integrator) and switching logic

This compact unit features voltage control for each stage with manual faders to improve usability, feel and aesthetics.

A unique feature of the VC ADSR is the gate outputs for each stage of the envelope offering an extra level of control over your patch!

Envelope generation can be triggered and controlled with the use of the panel mounted push button or with the trigger/gate input.

Control of the response curve between each stage of the envelope (from linear to logarithmic/exponential) is provided by a potentiometer.

Phase Time Limits:

- Attack: Min 3.0ms (down to 200uS with negative CV) // Max 10s
- Decay: Min 2.8ms (down to 400uS with negative CV) // Max 10s
- Release: Min 2.8ms (with Sustain at maximum) // Max 10s
Read more
 1 in stock $177.30
Cat: 668607 Rel: 09 Nov 17
 
Slew Limiter/Lag Processor - 6HP
Notes: Voltage controlled slew limiter, AKA Lag Processor.

A Slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of change of the output voltage over time.

It is widely used with pitch CV's to obtain portamento but is also very useful for converting a gate signal into a basic envelope.

The module has independent time controls for rising and falling voltages, each with it's own CV.

- Current needs: +12V: 10mA, -12V: 10mA
- Width: 6 HP
- Depth: 31 mm (inc power connector)
Read more
$99.46 SAVE 20%
 1 in stock $79.57
Items 1 to 13 of 13 on page 1 of 1

Filter

Synth modules
Equipment
Release Date
Featured
Close