100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Home  Equipment  

Synth modules

Options
Items 101 to 150 of 180 on page 3 of 4
«  1  2  3  4  »
Subscribe to our weekly Studio Equipment emails
Intellijel Tete Module (synth module)
Cat: 747529 Rel: 30 Dec 19
 
Expander module for the Tetrapad controller
Notes: Expander module for the Tetrapad, Intellijel's multi-dimensional performance touch controller. Adds huge functionality, allowing you to sequence parameters and create complex modulation.

Supllier notes:
Tete is the long awaited and highly anticipated expander for the Tetrapad.

Some of the key features:

Three primary modes: VOLTAGES, NOTES and COMBO.

VOLTAGES mode:

Up to 16 voltage storage locations (grid) with 8 voltages stored at each location.

You have the choice to record and playback your recall of these locations in a looper style (just play freely and spend arbitrary amount of time at any location) or as a clocked sequence (SH-101 style). Additionally you can traverse the matrix using the X and Y CV inputs to get Cartesian style sequencing.

There is also variable slew that allows you to morph/glide between the values.

NOTES mode:

You can create sequences or loops in chord, scales or keyboard mode. The isomorphic keyboard grid can vary from 4 notes to 12 notes max. There are real-time performance looping, transposition and inversion capabilities via the CV inputs and dedicated loop button. In sequencer mode each step can be a tie, rest, or gate with size 25/50/75%. Basically we have created a way to very quickly and intuitively make chord sequences that are very musical and easy to manipulate. It is difficult to summarize in words but we will be sure to create some videos to demonstrate how easy and fun this is to play with. It definitely represents something unique in the landscape of Eurorack sequencers.

COMBO mode:

In this mode you can loop record your performance on any combination of the following functions:

fader, bipolar fader, drum hit, switch or LFO. Kind of like Elektron style parameter locking but all of the motions is recorded continuously instead of just in slices. Instantly turn a simple patch into a highly animated and complex beast.

With all of the above mentioned loop recording modes you can very easily overdub since the Tetrapad detects pressure/pressing. In combo mode you can erase individual channels.

All modes allow for internal or external clocking and configurable syncing.

All of the modes have special XYZ CV modulation assignments and make use of the dedicated CV outputs.

For example, in Looper mode one of the CV outputs generates a continuous ramp that represents the position in the loop. This can be used with devices like the Planar 2 in Interpolation mode to sync the recorded patterns together no matter what tempo.
Read more
 7 in stock $290.62
Click for better price!
or call +44 20 7424 1960
quote 747529
Cat: 757115 Rel: 07 Jan 20
 
Precision adder/averager in an ultra-narrow 2HP
Notes: To any new modular system owner, the need to easily combine different voltage sources quickly becomes apparent. While a mixer is the obvious solution, these modules are not suitable for adding precise pitch control voltages (CVs) since the channel gains cannot be set exactly to unity.

Add 2 provides a compact solution to this problem, precisely summing the input signals down to 1 or 2 outputs. Alternatively, each section can be configured as an averager using the jumpers on the rear. This way, LFO waveforms or audio sources can be combined while maintaining the average signal level and avoiding clipping. The high-end components provide exceptional performance, making Add 2 suitable for audio, control voltages and gates/triggers.

With the bottom section's first input not in use, the top output is injected into the bottom. This allows 5 signals to be combined into 2 outputs, adding flexibility to your patching.
Read more
 1 in stock $65.66
Click for better price!
or call +44 20 7424 1960
quote 757115
Cat: 757112 Rel: 06 Jan 20
 
Analogue 'OTA style' cascaded 4-pole lowpass VCF with self-oscillation capability
Notes: Belgian analogue innovators Joranalogue serve up an ultra-versatile filter module. Multimode flexibility meets self-oscillation for added sonic versatility. A hell of a lot of filter for the money.

Supplier's notes:
Representing the cutting edge in modular analogue voltage controlled filter (VCF) design, Filter 8 offers more possibilities and higher fidelity in 12 HP than ever before.

Starting from the classic OTA-style 4-pole cascaded lowpass (LP) topology, Filter 8 features separate LP outputs, each with their own character. Additional filter responses are achieved by pole mixing: 1-pole highpass, a special band boost and notch response, phase shifter and 4-pole bandpass. All outputs are available simultaneously.

Key to Filter 8's performance is the innovative resonant feedback circuit. By increasing the resonance, all outputs will resonate at the filter frequency, without any low frequency response loss. At higher resonance levels, self-oscillation is achieved, turning the module into an excellent 8-phase sine wave voltage controlled oscillator (VCO) with temperature and switchable gain compensation, low distortion, constant amplitude and accurate frequency tracking over at least 5 octaves. At sub-audio frequencies, Filter 8 can function as an 8-output voltage controlled slew modifier or 8-phase low frequency oscillator (LFO).

Simultaneous exponential and linear frequency modulation is possible, for classic FM tones or chaotic modulation. A hold feature is also provided, 'freezing' the output voltages manually or under gate control. This is useful for halting modulations, or as a sync-like effect at audio frequencies. The dedicated 'ping' input allows you to easily create crisp percussive sounds with different timbres.

While rooted in the legacy of classic synthesisers, Filter 8 provides a new approach to musical signal generators and modifiers: instead of simply a VCF, VCO, slew modifier or VCLFO, a single analogue module can now be any of those, and anything in between.
Read more
 2 in stock $257.27
Click for better price!
or call +44 20 7424 1960
quote 757112
Cat: 757113 Rel: 07 Jan 20
 
Precision buffered multiples in an ultra-narrow 2 HP
Notes: 'Multiples' are the classic solution to a common problem in modular synthesisers: how to distribute one output signal to multiple inputs. Simple passive multiples consist of several sockets, wired together.

Link 2 is a buffered multiples module. Each output is independently buffered using active electronics. This avoids many of the problems with passive multiples: signal cuts when patching cables, loading effects when driving many inputs etc. The high-end components provide exceptionally low noise and distortion, making Link 2 suitable for audio, CVs and gates/triggers. And unlike most buffered multiples modules currently available, it retains the accuracy of pitch control voltages to the last cent.

With only the top input socket in use, the signal is sent to all 6 outputs. Plugging a cable into the bottom input socket separates Link 2 into dual 3-way multiples, adding flexibility to your patching.
Read more
 2 in stock $65.66
Click for better price!
or call +44 20 7424 1960
quote 757113
Cat: 757108 Rel: 06 Jan 20
 
Analogue audio signal mixer with three high-end DC-coupled voltage controlled channels
Notes: By combining a mixer and four VCAs in a single module, Mix 3 manages to provide a unique combination of compact size and functionality in just 6 HP. High-end signal paths ensure extremely low noise and distortion, wide headroom and precise gain control, despite the small form factor.

Each of the three main channels has an exponential response, which is more natural for audio than linear, as it matches the human hearing. However, all signal paths are DC-coupled, so control voltage (CV) signals can be processed as well.

What truly sets Mix 3 apart from other compact mixing modules are the three CV inputs, providing voltage control over the signal levels. This even allows you to go beyond unity gain and reach up to +20 dB of amplification. Once a CV input is used, the corresponding channel knob becomes a CV attenuator.

When clipping, Mix 3 does so in a clean, symmetrical way. This yields a very pure overdriven sound, only containing odd harmonics, and allows the module to be used as a triple voltage controlled distortion.

Additional features include audio indicator LEDs, a fourth auxiliary input, voltage control over the output level and a line output jumper setting.
Read more
 1 in stock $135.63
Click for better price!
or call +44 20 7424 1960
quote 757108
Cat: 757116 Rel: 07 Jan 20
 
Compact dual mono or stereo XLR/6.35 mm jack input module
Notes: While modular synthesisers are most often used as stand-alone instruments, they also present exciting opportunities for processing external signals. Anything from an electric guitar to an effects send on a studio mixing desk can benefit from the unique sonic capabilities of even a modest Eurorack system.

However, patching in an external source usually requires an adapter cable and plenty of clean gain to bring the signal to Eurorack level. If the signal source is balanced, a balanced input is required as well to provide the best possible interference rejection.

Receive 2 (or RX2 for short) provides a convenient all-in-one solution. It offers two universal external inputs, which accept both balanced or single-ended signals via XLR or 6.35 mm jack connectors.

The circuit incorporates low-impedance design practices, radio-frequency (RF) filtering and premium balanced receivers to provide transformer-like interconnect performance in a compact and affordable module. And thanks to the electrostatic discharge (ESD) protection, it’s rugged enough to survive the rigours of performing on the road.

The very clean integrated pre-amps feature variable gain, ranging from unity to +40 dB on each channel. As a result, Receive 2 can handle just about any signal source you may encounter, including electric instruments, piezoelectric pickups and many dynamic microphones.

Adjusting the gains is a breeze thanks to the dual peak-responding LED meters. A mix output is included as well, so external signals can be easily mixed directly in the module.
Read more
 1 in stock $165.76
Click for better price!
or call +44 20 7424 1960
quote 757116
Cat: 757110 Rel: 07 Jan 20
 
Two precision analogue CV processors with input selection, voltage hold and gated polariser functionalities
Notes: A 'Swiss Army knife' for your modular system, Select 2 provides two highly accurate gate-controlled voltage processors in 6 HP. These allow you to create, switch, mute, hold, invert, attenuate, offset, add/mix and subtract voltages, from slow control voltages (CV) up to audio frequencies.

Each processor features two signal inputs, with the left input used by default. A gate on the 'select' input switches to the right signal input instead. The signal inputs are normalised to the precision +5 V reference (left) and 0 V (right).

Following the input section is a hold circuit. A rising edge on the 'hold' input freezes the input voltage at that moment, until the gate input goes low again. While most sample/track-and-hold modules only manage a few seconds, Select 2’s 'low droop' design enables it to store a held voltage accurately for several minutes.

The end of the signal path consists of a gated polariser/attenuverter. Using the knob, the voltage at the output can attenuated and/or inverted: the gain is -1 (inverted) at the minimum setting, 0 at the centre and +1 (unity gain) at the maximum. The polariser can be disabled using the 'unity' gate input. This unique ability enables a variety of interesting gate-controlled signal modulations. Dual-colour LEDs show the output voltage of each processor.

Finally, if the A output socket is left unused, the signal is mixed together with the B output. This enables signal offsetting, CV mixing, pitch transposing etc.
Read more
 2 in stock $135.63
Click for better price!
or call +44 20 7424 1960
quote 757110
Cat: 757107 Rel: 07 Jan 20
 
Hands-on signal switching and routing solution - 8HP
Notes: Designed with and for performing artists, Switch 4 delivers a hands-on signal switching and routing solution for your Eurorack modular synthesiser.

Quickly mute audio signals, trigger envelopes live, select modulation sources on the fly... With custom dual-action toggle switches, an intuitive interface and sturdy construction, Switch 4 will prove just as useful on stage as in the studio.

The bottom switching section includes four lever-actuated toggle switches, to make or break the signal path between the inputs and outputs. These switches feature a dual action: latched upwards, momentary downwards.

The four input signals are also sent to the top routing section, where two rotary switches allow you to select the signals to be sent to the matching outputs. Here you'll also find dual-action toggle switches, for added versatility.

Finally, all signal paths are buffered, avoiding signal cuts when shorting a jack during patching or severe loading effects when driving many inputs. The high-end components provide exceptionally low noise and distortion, so Switch 4 can reliably process audio, control voltages and gates/triggers.
Read more
 1 in stock $101.18
Click for better price!
or call +44 20 7424 1960
quote 757107
Cat: 757117 Rel: 06 Jan 20
 
Compact stereo or dual mono XLR output module - 6HP
Notes: Simple but effective output module, converts stereo instrument-level signal to balanced XLR outs. Ideal for live use but just as good for avoiding unwanted hum in the studio.

Supplier's notes:
Whether it's in the studio or on a live stage, keeping audio interconnections free from unwanted hum and interference can be a challenge. Balanced lines are the proven solution to this problem.

Conventional balanced output solutions often rely on transformers providing galvanic isolation to mitigate the effects of ground loops. Unfortunately, these components are bulky, expensive and colour the sound (often unfavourably, especially in the low end).

Instead, Transmit 2 (or TX2 for short) takes a fully solid-state approach. Offering a stereo pair of XLR balanced outputs, it ensures that the sonic clarity of your carefully planned modular system is not lost in its interface to the outside world.

Engineered to provide massive headroom while retaining extremely low noise and distortion, Transmit 2's circuitry incorporates low-impedance design practices, radio-frequency (RF) filtering and premium balanced drivers to provide transformer-like interconnect performance in a compact and affordable module. And thanks to the electrostatic (ESD) and phantom power discharge protection, it's rugged enough to survive the rigours of performing on the road.

Adjusting the main output level is a breeze thanks to the dual peak-responding LED meters. A high-end headphone amplifier is included as well, controlled by a separate level knob. It can deliver the voltage and current required to power practically any headphones, regardless of the impedance or driver technology. This 3.5 mm stereo socket can function as an auxiliary stereo line output or even drive small passive speakers, making Transmit 2 an all-round flexible answer to all your output needs.
Read more
 4 in stock $171.15
Click for better price!
or call +44 20 7424 1960
quote 757117
Cat: 732819 Rel: 21 Oct 19
 
Audio repeater synth module - 16HP
Notes: Freaky stereo digital delay from the Eurorack gods at Make Noise. Typically creative stuff, packed full of interesting features for creating complex echoes, modulating sounds and generating loops.

Supplier notes:
The Mimeophon music synthesiser module is a stereo, multi-zone colour audio repeater by Make Noise and soundhack, coded by Tom Erbe.

The Mimeophon (from Greek mimeo (repeat/copy) and phon (sound)) is a modern take on various historical sound copying, echo and repeating devices. It allows for Stereo modulations of Time, Space and Timbre of Mono or Stereo sound sources. The Mimeophon is capable of modulating and morphing time scales of repeated sound from micro-sound to note to phrase length while also colouring and spatializing the repeats.
Read more
 More than 10 in stock $365.98
Notes: Portland's Malekko serve up one of the most capable CV sequencer modules on the market. Eight channels of 16-stage CV sequencing, quantised or unquantised. Super powerful.

Supplier's notes:
Voltage Block is an 8 independent 16-stage CV sequencer packed with performance features and presets making the Voltage Block the ultimate CV tool. Create quantized or unquantized sequences for each output, record your modulation changes, tie sequences together, mute on the fly, randomize your outputs and so much more.

8 independent 16-stage CV sequencers packed with performance features and presets makes the Voltage Block the ultimate CV tool. Create quantized or unquantized sequences for each output, record your modulation changes, tie sequences together, mute on the fly, randomize your outputs and so much more. The Voltage Block can be used stand-alone or pairs well with Varigate 4 and especially Varigate 8+ to share clocking and preset save/recall. All in 20hp.
Read more
 2 in stock $317.54
MFB
Cat: 695619 Rel: 16 Sep 19
 
Analogue 24db lowpass filter - 8HP
Notes: The 24dB VCF SSI is a voltage controlled analogue low pass filter module with the new SSI2144 chip. In addition, it has a 12dB output that works either as a low pass or bandpass (+/- 12dB). There are two inputs, one with attenuator. Another CV input with attenuator is available for the cut-off frequency. The resonance is controlled either via a controller or via another CV input with attenuator.

The power consumption is +/- 30 mA. The module has a width of 8 HP (40 mm).
Read more
 1 in stock $73.19
Click for better price!
or call +44 20 7424 1960
quote 695619
MFB
Cat: 695604 Rel: 16 Sep 19
 
MFB-522/Tanzbar style analogue bass drum module
Notes: The Bass-522 module is based on the 522 circuit and offers a punchy attack, long decay and wider pitch range. Adjustable noise and pitch envelope have also been added.

The sound can be triggered by Gate, M-Bus and signals like piezo pickups, dynamic mics and drum pads. The Sense parameter decides the sensibility and dynamic of attack, amplitude. decay and pitch.

The following parameters are available and can be controlled by CV:

TONE dampens the attack transient.
DECAY sets the release time of the amplitude.
TUNE defines the basic pitch from around 35 to 70 Hz.
PITCH controls the amount of pitch envelope.
NOISE mixes the noise floor (no CV control).

The module offers the new developed M-Bus connector which means you can you control everything via MIDI/CV interface or the new MFB SEQ-01 Pro Drum Sequencer without additional patching. The following addresses are supported:

Trigger with Velocity - MIDI Note #35 or #36 (switchable) and controller values for Tone, Decay, Tube, Pitch and Noise Decay.

The module has a width of 8HP (40mm).
Read more
 3 in stock $85.03
MFB
Cat: 761849 Rel: 16 Sep 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The OH/HH/CY module is based upon the cymbal and hihat sound-circuit of the MFB-522 drum-computer, slightly modified and expanded.

The module was developed as a modular component. Therefore, the parameters decay for cymbal and open-hihat and tone can also be controlled by CV-sources like envelopes, LFOs, step-sequencers. Manual adjustment is available for the parameter tune that affects both cymbal and hihat as well as for the closed-hihat's decay.

Triggering open-hihat, closed-hihat and cymbal of the module is possible through various signal types. Besides sequencer generated analogue and digital trigger-signals, drum-pads, piezo and dynamic microphones may also be used. Here, the controls allow individual adjustment of the input sensitivity. Dynamic triggering will not only affect the sound's volume but also attack and sound length slightly. The functions in detail:

HIHAT: The hihat sound is created by several square-oscillators that are fed into a band-pass-filter. Two decay controls allow individual sound-length-adjustments for closed- and open-hihat. In addition, the decay parameter for the open-hihat can be controlled by CV-voltage.

TUNE: Sets the frequency for all square-oscillators simultaneously. Because the cymbal sound accesses the same oscillators, tune also affects this sound.

CYMBAL: The cymbal sound is based upon the same sound source as the hihat, only that it uses two band-pass-filters that individually shape the attack- and decay-phase. However, the decay parameter controls the length of both attack and sound length. This parameter can also be controlled by an external CV-source. Tone sets the balance between the differently filtered signals paths. This parameter is also under CV-control but does not offer an internal attenuator.

A specialty of the cymbal sound is its tone-input. Here, you can connect an external sound source that replaces the internal square-oscillators for the decay phase. The internal oscillators are still in use for the sound's attack-phase.

The module has a width of 12 HP (60 mm).
Read more
 1 in stock $101.24
Cat: 731184 Rel: 02 Oct 19
 
5U version of the Ataraxic Iteritas
Notes: Ataraxic Iteritas Magnus is an extension of the first Eurorack module, the Ataraxic Translatron. AIM starts with one of three bit tables shaped via variable interpolation that is then scrolled through, amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Subby basses, metallic drones, unrelentingly digital timbres and more are all to be had from the AIM. Ataraxic Iteritas Magnus is the 5U version of the Ataraxic Iteritas. Guaranteed to make the fax machine jealous on an even bigger scale.
Read more
MRP:$476.64 SAVE 19%
 1 in stock $386.44
Click for better price!
or call +44 20 7424 1960
quote 731184
Cat: 751611 Rel: 08 Oct 19
 
Analogue-inspired parameterized drum synthesiser
Notes: Basimilus Iteritas Alter is a parameterized digital drum synthesizer with its roots in the analog world. At its heart, it is a simple six-oscillator additive synthesizer with adjustable waveform, harmonic spread and decay. Adjustable attack including a noise oscillator is also included. dLese are summed and fed into an in..nifolder for crunch and variety.

Basimilus Iteritas Alter is an improved version of Basimilus Iteritas. It is 2HP smaller, includes CV of switches, adds an third mode, and pitch range and knobs know offset rather than attenuate.

Size: 10HP Eurorack
Depth: 1.5 Inches
Power: 2x8 Eurorack
Draw +12V: 150 / 80
Draw -12: 5 / 5
Draw +5v: 0 / 90
Read more
MRP:$430.14 SAVE 21%
 2 in stock $338.00
Click for better price!
or call +44 20 7424 1960
quote 751611
Cat: 731183 Rel: 30 Aug 19
 
5U version of the Noise Engineering dynamic wavetable oscillator
Notes: Cursus Iteritas Magnus is an oscillator that works from a dynamically generated wavetable. It gives the user spectral-like controls over three different modes based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. Cursus Iteritas Magnus parametrizes a wide variety of sounds, but because the sounds are all based on orthogonal functions, it has a musical tone structure and can produce an extremely wide variety of harmonic sounds

Cursus Iteritas Magnus is the 5U version of Cursus Iteritas.
Read more
MRP:$474.05 SAVE 19%
 1 in stock $384.28
Click for better price!
or call +44 20 7424 1960
quote 731183
Cat: 752820 Rel: 17 Oct 19
 
Comb oscillator, VOSIM, summation synthesis & phase modulation with adjustible waveform & wave folder
Notes: Loquelic Iteritas is a digital VCO with interpretations of three classic synthesis algorithms involving dual pitch control. It creates a huge variety of sounds parameterized by four tone and two pitch controls.

It has had glowing reviews from Surgeon and Surachai, and I am personally very excited about this module!

It has a simple interface, with 3 different synthesis algorithms allied to a number of different controls / CV inputs which have different effects, depending on which mode you choose. Simply hook up a number of modulation sources to the 4 inputs and start wiggling!

Rev.2 now features an additional sync input.

Size: 10HP Eurorack
Depth: 1.5 Inches
Power: 2x8 Eurorack
Draw +12V: 150 / 80
Draw -12: 5 / 5
Draw +5v: 0 / 90
Read more
MRP:$401.72 SAVE 23%
 1 in stock $307.85
Cat: 753566 Rel: 07 Nov 19
 
Full wave rectifier & distortion - 8HP
Notes: Grimy distortion module based around a full wave rectifier circuit, giving it a unique sound compared to more common wavefolding and clipping. Dirty.

Supplier's notes:
Pura Ruina is a three-stage CV-controlled fully-hyphenated full-wave rectifier/distortion designed for audio. Simple waveforms can be manipulated into completely new and exciting tones, and already complex sounds can be shredded into sonic oblivion. Add some CV and you'll never want to let PR out of your rack!

Each stage has an individual level control with corresponding CV and individual out, as well as feeding to the universal Sum output. PR's rectification creates a unique flavour of distortion unlike standard wavefolding or clipping. The possibilities are virtually endless: add to a west-coast style complex oscillator setup for unique timbral shaping, annihilate a percussion mix through it, run its individual outs through other Ruina modules for further mayhem... You'll never run out of awesome things to try.
Read more
MRP:$214.42 SAVE 17%
 2 in stock $178.68
Click for better price!
or call +44 20 7424 1960
quote 753566
Cat: 739889 Rel: 02 Oct 19
 
Four-channel precision adder, buffered mult, and transposition tool
Notes: Quantus Pax is a four-channel precision adder, buffered multiple, and polyphonic transposition utility. Each channel has two CV inputs and can be further modified by the three Xpose inputs. QP is made with high quality low-tolerance resistors for unbeatable accuracy. Patch-wide key changes, polyphonic movement, mathematically derived melodies, and more are all to be had with this simple but useful utility.
Read more
MRP:$267.38 SAVE 17%
 1 in stock $222.82
Click for better price!
or call +44 20 7424 1960
quote 739889
Cat: 746361 Rel: 16 Sep 19
 
Multiband distortion & VCA module
Notes: Distortion is fun, but it's even better when you split it up across the frequency spectrum. Seca Ruina takes an input, splits it up into three frequency bands, and lets you drive them into annihilation. SR includes a bypassable VCA on the output and CV over individual band and universal drive amount. With individual outputs for each band, you can process each band further externally. So much potential in only 6hp!
Read more
MRP:$214.42 SAVE 17%
 2 in stock $178.68
Click for better price!
or call +44 20 7424 1960
quote 746361
Cat: 732131 Rel: 20 Jan 20
 
interactive touch control module
Notes: Proper hands-on modular expression here. Two pairs of five multi-dimensional touch pads with configurable CV and gate outputs for monophonic or duophonic control of oscillators or modulation of pretty much anything else.

Supplier's notes:
Intuitive and inspiring, the Lifeforms Touch Controller replaces the creative restrictions of a traditional chromatic keyboard with a set of fully configurable multi-dimensional touch pads. A configurable duophonic controller that utilizes two sets of five touch pads to offer a flexible and interactive performance surface. Performances can be interpreted with a unique combination of monophonic and duophonic responses. The Channel Animator functions quickly generate complex sequences. Intuitive and inspiring, the Lifeforms Touch Controller is the perfect interface for an experimental journey.

Easy to use, the interface is split into Left and Right sides. Each side offers a gate output, assignable CV A output, assignable CV B output, and touch position Y-Axis output. CV A is set using the top row of knobs and CV B uses the bottom row. A third set of outputs called "All" responds to both Left and Right sides.

The Channel Animator section controls the sequencers and modifies the functionality of the Touch Controller. Mono and Duo buttons switch between monophonic and duophonic modes. The Rest/Reset/Division button is used by the sequencers to add rest notes, reset, and change the clock division of a sequence. The Scan CV input responds to a 0-5v signal and assigns the active monophonic or duophonic channels based on the incoming voltage. Scan can be used to create various cycling arpeggiator or random sequences. The Reset gate input resets the sequencer to the first step. Step gate input advances the sequencer.

Enter Monophonic Mode by pressing the Mono button. In Monophonic mode the All output section responds to the selected channel. The Left section and the Right section respond when a channel in their section is pressed.

A single sequencer has access to all 10 channels. The sequence is performed in the order the notes are entered. Press and hold the Mono button then tap a series of channel touch pads to create a sequence. While holding down the Mono button during programming, pressing the Rest/Reset/Division button adds a rest to the sequence. Once a sequence is created, press and hold the Rest/Reset/Division button then tap a Channel Touch Pad to change the clock division left to right from #1 to #10. A sequence is clocked with the Step gate input jack. The Reset gate input resets the sequence to the first step. To stop the sequence, press and release the Mono button without touching a Channel Touch Pad.

Enter Duophonic Mode by pressing the Duo button. In Duophonic mode the All output section mixes the outputs of both the Left and Right selected channels creating interaction and transposition between the Left and Right sections. The Left and Right output sections respond when a channel in their section is pressed.

In Duophonic Mode, the Left and Right sections each have their own sequencer. Sequences are performed in the order the notes are entered. Press and hold the Duo button then tap a series of Channel Touch Pads on the Left and Right sections to create the sequences. While holding down the Duo button during programming, pressing the Rest/Reset/Division button adds a rest to the last selected sequence. Once the sequences are created, press and hold the Rest/Reset/Division button then tap a Channel Touch Pad to change the clock division left to right from #1 to #8. The Left 5 channel touch pads set the division of the Left section and the Right 5 channel touch pads set the division of the Right section to #1, #2, #3, #4, #8. Sequences are clocked with the Step gate input jack. The Reset gate input resets both sequences to the first step.
Read more
MRP:$476.64 SAVE 17%
 4 in stock $397.20
Click for better price!
or call +44 20 7424 1960
quote 732131
Cat: 732315 Rel: 11 Sep 19
 
MIDI-CV converter module for Eurorack - 14HP
Notes: Eight-voice modular synthesis? Yes please. Updated version of the Poly splits your MIDI signal to CV and gate for fully polyphonic action. Chain multiple units for even more multi-voice madness.

Supplier notes:
The Polyend Poly 2 module is a polyphonic MIDI to CV converter Eurorack module, and it will change how you interact with your sequencers, controllers, DAW, and more. This powerful module features MIDI I/O plus USB A and USB B inputs, with a total of four Gate outputs, four Pitch outputs, and 12 outs for CV (CC 0-127) signals. And using the Smart Thru connection, you can daisy-chain multiple Poly 2 modules together for even more voices. And Sweetwater was excited to report that Poly 2 is even compatible with the MPE (Multidimensional Polyphonic Expression) standard used in innovative controllers such as the Roger Linn Design LinnStrument and the ROLI Seaboard series. Once you've explored the polyphonic expression the Polyend Poly 2 module is capable of, you'll never want to be without it.

No matter what kind of MIDI controller you use - keyboard, ribbon controller, pressure pad, or whatever - the Poly 2 module offers built-in scale filtering rewards you with highly musical output. Select a scale, and only the notes within that scale will be passed along to your patch destinations. This is different from scale quantization, which forces ANY input to trigger the note its closest to in the scale, and can make it much more enjoyable to use alternative MIDI controllers with the Poly 2 module.
Read more
 9 in stock $307.85
Click for better price!
or call +44 20 7424 1960
quote 732315
Polyend Preset Module (synth module)
Cat: 732317 Rel: 11 Sep 19
 
Macro controller & sequencer - 22HP
Notes: Presets on a modular? Sacrilege! Or the best of both worlds, depending how you look at it. We'll probably go with the latter, because this is a super versatile little programmer/sequencer/preset storage module.

Supplier notes:
The 22 HP interface is simple, clean and streamlined. At first glance, Polyend Preset module might look like simple a digital preset manager for Eurorack systems, but it's much more than this. Its vast implications make it a very smart companion for your modular system. But let's start from the basics. With the use of 9 LED coloured clickable encoders, Preset allows you to store up to 9 different CV output values in 32 banks of 32 presets. Yep, 1024 in total!

It's capable:

Program the notes sequences using one of the 32 build-in musical scales. Record the automation using the encoders or external source.

Four modes, totally different possibilities:

Depending on what you want to achieve, there are four modes you can choose from: First, Next, Channel and Note.

Both First and Next modes are perfect for building your unique polyphonic synthesizer.

The Channel mode lets you choose which MIDI Channel is responsible for which voice. This mode is what the majority of users utilise to connect DAWs or external sequencers.

The Note mode translates data received from MIDI Notes C through G and directs them into the corresponding voices (no matter the octave). This scenario works excellent for triggering drums from drum pads or drum triggers.
Read more
 More than 10 in stock $300.32
Click for better price!
or call +44 20 7424 1960
quote 732317
Cat: 740273 Rel: 02 Oct 19
 
32 step sequencer with fractal-like pattern generation
Notes: If we're honest we don't really understand fractals. Something to do with maths, apparently. But that doesn't really matter because we do understand this sequencer module, which is ideal for randomly twisting and morphing sequences.

Supplier notes:
Bloom is a fractal sequencer capable of generating infinitely evolving melodies with a host of musical features.

At its core is a powerful 32 step sequencer with two independent channels and an intuitive interface. What makes the Bloom come alive are its fractal algorithms which can transform existing sequences into powerful melodies, or even generate new patterns altogether. The base sequence is known as the Trunk and can be programmed by hand, or automatically generated with the Mutate function. Once a Trunk sequence is in place, fractal transformations are only a knob turn away by using the Branch and path controls. Each new Branch adds a complete variation to the base sequence and Path determines its passage through the set of recursively generated sub-sequences, offering a unique take on the melody with each turn of the knob.

Bring your sequencing to life with Bloom.
Read more
MRP:$393.97 SAVE 19%
 2 in stock $317.54
Click for better price!
or call +44 20 7424 1960
quote 740273
Cat: 754307 Rel: 28 Oct 19
 
Quad voltage controlled filter module
Notes: Tone is a quad, voltage controlled filter with low pass and band pass outputs. Its four channel architecture enables the intuitive patching of shimmering, polyphonic textures. The 24dB slope provides a warm, buttery character. Self oscillation allows each channel to double as a sine wave oscillator with v/oct tracking across four octaves. Cascade OTA topology. A perfect match for the Chord.
Read more
MRP:$357.80 SAVE 24%
 1 in stock $272.33
Cat: 745924 Rel: 19 Sep 19
 
6 channel mixer based on the mixer of Buchla’s 100 series
Notes: The Model 106 is a 100% discrete transistor based 6 input audio mixer.

Functionally, it allows the user to manually mix 6 signals into 1 output (All), or it may be used as 2 independent 3 into 1 mixers ("1-3" side and "4-6" side).

Aurally, the all transistor signal path adds its own unique sonic signature, imparting a subtle lo-fi warmth and saturation to the sound.

Additionally, the "All" output is inverted with respect to the "1-3" and "4-6" outputs. This feature can be exploited to creative effect.
Read more
 1 in stock $303.54
Click for better price!
or call +44 20 7424 1960
quote 745924
Cat: 745927 Rel: 19 Sep 19
 
Quad VC Gate - 14HP
Notes: The Model 110 is 4 independent transistor based voltage controlled amplifiers behind one panel. Each VCA (or "gate" in the original terminology) consists of an audio input with an attenuator, a CV input, and 2 outputs. The VCA's are AC coupled - meaning that they will not pass slow (or static) control voltages. The VCA's are calibrated to unity (an input of a 10v peak to peak audio wave, will produce a 10v peak to peak audio wave at output) when 5v is applied to the CV input and the attenuator is at approximately the 3'oclock position.

Notes: Unlike the later (and better known) Model 292, the original low pass gate - the Model 110 is entirely transistor based (rather than vactrol based like the 292), and is much faster.
Read more
 1 in stock $407.96
Click for better price!
or call +44 20 7424 1960
quote 745927
Cat: 745929 Rel: 19 Sep 19
 
Control voltage processor - 14HP
Notes: The 156 is an accurate reproduction of the original 156, however it's accuracy also means that it's functionality is based entirely on the needs of a cohesive system designed in the mid 60's. It cannot work with negative voltages, the maximum gain is set at 1:1, and the transistor core makes it inherently nonlinear.

The 156M is a modern update of the original 156 that we feel both works within the paradigm of the original 100 series and helps to interface with modern Eurorack gear. Like the 156, the 156M consists of two independent voltage processors. Each side can mix between 2 independent control voltages. This mix can then be offset by either a positive voltage or (unlike the original) a negative voltage. The mixed and offset control voltages can then be attenuverted - which allows the user to set the gain in either a positive or negative direction and can also boost the gain to approximately 1.5x the original signal. In essence, the combination of these three facilities allow you to mix, offset, compress, expand, invert, amplify, or scale any CV source.
Read more
 1 in stock $303.54
Click for better price!
or call +44 20 7424 1960
quote 745929
Cat: 745931 Rel: 19 Sep 19
 
Control voltage processor - 14HP
Notes: The Model 156 was likely the first "CV manipulation" tool ever available to modular synthesists. In the original 100 series environment, the 156 was used as a front end to nearly every other module with a CV input. The majority of CV inputs throughout the 100 series do not have associated attenuators or offsets built into the modules, and thus they relied on the 156 to scale, offset, and attenuate the voltages traveling around the system. The 156 consists of 2 independent "voltage processors" Each with a control to mix the two inputs, add a voltage offset (positive only), and then a control to mix between the external CV to be processed and the internal offset. In addition, the "B" channel has an inverting input. The 156 is as close a replica to the original 156 as possible, and is built entirely of discrete analogue components.
Read more
 1 in stock $303.54
Click for better price!
or call +44 20 7424 1960
quote 745931
Cat: 745932 Rel: 19 Sep 19
 
Dual sine-sawtooth generator based on Model 158 from the Buchla 100 series
Notes: The Model 158 is a dual oscillator created out of an entirely discrete transistor core. It consists of two independent and identical sides each with a front panel tuning knob, a frequency modulation input and attenuator, and a knob to fade smoothly between saw and sine waves. The RED PANEL model 158 is based off of the original "A" variant of the 158 oscillator.

The 158 was one of the very first voltage controlled oscillators ever produced. As such it contains many particular quirks/rawness of this first generation of synthesis. The exponential scaling of the oscillator is far from accurate, there is no temperature compensation, quick changes in pitch produce a slewing effect, and the saw waveform only vaguely resembles a saw wave through part of its range. It is as accurate a recreation as we believe is possible with the components available today. We performed hundreds of listening tests to find suitable replacements for obsolete transistors, and hand select multiple transistors on each individual unit to ensure that they have the proper sound.
Read more
 2 in stock $472.54
Cat: 745934 Rel: 19 Sep 19
 
Dual attack generator featuring two ASR envelopes with linear voltage curves
Notes: The Model 180 is 100% discrete transistor core dual channel A/D A/H/D function generator (envelope). A trigger or gate signal greater than 2.5v at the "trigger" input causes the output CV to linearly ramp up to its maximum value at a speed set by the "attack time" pot. Once reaching the maximum CV output (set from the factory at 5v but easily adjustable via trimmer) the module will hold at this level for a static duration set by the "note duration" pot, or will hold at its maximum level as long as the trigger input is high. This behaviour is selected with the "controlled internally" vs. "controlled by trigger length" switch. At the end of the "hold" period the CV output will ramp back down to approximately 0v at a rate set by the "decay time" pot.

Like many "west coast" function generators, the envelope cannot be retriggered until the attack phase is complete, allowing for some function as a clock divider etc. The attack, hold, and decay times can be set very fast, and the module can easily create percussive blips as well as longer drawn out envelope shapes.
Read more
 1 in stock $407.96
Click for better price!
or call +44 20 7424 1960
quote 745934
Cat: 732306 Rel: 09 Sep 19
 
Stereo thru-zero state-variable VCF - 16HP
Notes: The only module named after a Swedish botanist? Possibly. Relentless synth innovator Dave Rossum pushes the boundaries again with a state-variable stereo filter offering through-zero frequency modulation. Sounds complicated. Sounds good.

Supplier notes:
Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state-variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
Read more
 2 in stock $407.96
Click for better price!
or call +44 20 7424 1960
quote 732306
Cat: 742228 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: More aggro filth from the troubled minds at Schlappi Engineering. This time it's a distortion/filter module with touch-sensitive metal conductors for hands-on control. Screaming saturation and self-resonance ideal for angry techno. Nasty.

Supplier notes:
The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $266.94
Click for better price!
or call +44 20 7424 1960
quote 742228
Cat: 742229 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $264.79
Click for better price!
or call +44 20 7424 1960
quote 742229
Cat: 735346 Rel: 02 Jan 20
 
Rhythmic 8 steps tap sequencer - 8HP
Notes: SAMBA Legacy is a rhythmic 8 steps tap sequencer with three CV in. Each time you tap, add more steps.

SAMBA Legacy works as a passive module, used by external clock - include an analogue drum synth with bass and percussion rhythms.

This module also can be used powerless.

There is a Sync in-out and a synth part (square and noise) which brings different rhythmic flavours multiply by a low tone sine wave.

Power on, Plug the clock, tap the buttons and let's Samba!
Read more
 5 in stock $141.01
Cat: 732823 Rel: 05 Sep 19
 
Nutube-based distortion module - 18HP
Notes: Gloriously grimy valve distortion for Sonocurrent's Eurorack debut. Subtle saturation through to filthy self-oscillation via Korg's low-power Nutube triodes. Nasty but nice.

Supplier notes:
The M T2D dual triode distortion is a Nutube-based distortion module for the Eurorack format, offering two independent channels which can be patched separately for parallel processing, stereo, or multiple sources, or used in series for more complex distortion of a single source (or simply extreme distortion settings).

Spectral tilt filters before each triode stage alternately boost or cut high and low frequencies for different harmonic emphasis. These filters also affect the feedback loops, and can interact in very interesting ways with high feedback settings. The individual tube bias controls can also have a strong influence in combination with high feedback levels, in addition to more subtle shaping of the distortion when feedback levels are low.

Independent control of input level, tube bias, feedback level, and dry/wet mix is available for each channel, with CV inputs for the bias and mix controls. The CV inputs for the mix controls also have dedicated attenuators. A global plate voltage switch offers two different character options, for either smoother distortion or more severe clipping.
Read more
 2 in stock $354.15
Cat: 757304 Rel: 20 Dec 19
 
Quad multimode oscillator with a vast array of sonic options
Notes: The Synthesis Technology E370 is a 4-channel DSP-based VCO, 54HP wide module that incorporates features from the E340 Cloud Generator and the E350 Morphing Terrarium (both are discontinued), while adding additional modes from the E352 Cloud Terrarium. It uses 105ma of +12V and 32ma of -12V.

VCO Architecture:

Each VCO is independent in the E370, but the 'pooled CV buss' (see description below) allows sharing of CV and mixing of audio outputs if desired.
The VCO is based upon a unique implementation of wavetable synthesis using 256 fixed-sample-length tables of 16-bit values. Each bank in memory consists of 64 wavetables, in an 8x8 array (like a chessboard). Our proprietary DSP algorithms then allow either smooth or 'glitched' morphing between the wavetables in various ways. The E370 comes with 3 factory banks (192 total waves) and internal FLASH memory to hold 26 user-defined banks. This allows over 1,650 individual wavetables to be accessible. The free, cross-platform WaveEdit program is used to generate and import WAV files to user Banks.

Colour LCD/Navigation:

Everyone hates 'menu-diving', us included. That's why we focused on making the most 'shallow' menu system possible. Everything is just 1 or 2 clicks away. No endless screens and pages to remember. The encoder is a mil-spec Grayhill optical encoder with a 25yr typical life. And if it ever needs replacing, it's on a easy to access cable assembly.

Sharing CV Resources:

The factory default state of the E370 is each VCO has 2 PARMs called X and Y. VCO1 has X1 and Y1, VCO2 has X2 and Y2, and so on. However, these are not 'hard' assignments, just the default ones. You can share ANY of the 8 PARMs across 1-4 VCOs. For example, PARM Y3 can be assigned to all 4 VCOs at once, so turning the PARM Y3 knob and the external MOD Y3 CV is fed to every VCO. This voltage can then modulate each VCO in a different way, depending on where you assign it.

User Wavetables and Patch Storage:

Loading and storing your own wavetables is via the uSD card interface. The uSD card is NOT REQUIRED to run the E370. It is also used for firmware updates. The free application WaveEdit is used to format the wave data and bank data into the proper format used inside the E370.

Audio Output Mixer:

The default state of the Mixer is each VCO is full volume and only appears at its own output jack. Using the Mixer screen, each VCO output can be mixed with all the others. This is useful for the Morph + Phase mode, and also during live performance where only 2 audio outs are commonly used. The mixing levels are fixed in log steps: there is no 'CV-controlled mixing' function.

VCO Modes:

Although the E370 excels at smooth morphing between wavetables (first introduced in the E350 Morphing Terrarium in 2010), traditional VCO waves such as saws, pure sines, and filtered noise (using a 4-pole resonant lowpass ladder filter) can be selected. Thru-zero, linear FM (in 3 ranges) can be used on not just triangle waves (as in an analog VCO) but with ANY waveshape or any wavetable. Here are all the different modes you can place each VCO in, and remember each VCO can be a different mode.
Read more
 1 in stock $1,102.25
Cat: 719663 Rel: 02 Sep 19
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $26.91
Cat: 719670 Rel: 02 Sep 19
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
 4 in stock $41.98
Click for better price!
or call +44 20 7424 1960
quote 719670
Cat: 719701 Rel: 02 Sep 19
 
Dual hybrid oscillator
Notes: The 2OSC/d module contains two 1V/octave hybrid oscillators. Each of them features:

- One frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth/Square/Sub-octave output

The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.

The module is designed as a hybrid digital/analogue module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analogue. It's a new idea/concept that I have implemented here; the design causes the waveform to get a bit gritty at higher frequencies (but not "digital noise") - it's the character of this thing!
Read more
 2 in stock $45.21
Click for better price!
or call +44 20 7424 1960
quote 719701
Cat: 719665 Rel: 02 Sep 19
 
Sample & Hold module
Notes: The purpose of the SAMPLE&HOLD module is to "freeze" the input voltage with a trigger input.

Typically used for random CV patterns if a noise signal is fed to the input and triggered e.g. by an LFO.
Read more
 2 in stock $27.98
Cat: 719699 Rel: 03 Sep 19
 
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
 3 in stock $28.26
Cat: 719668 Rel: 03 Sep 19
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
 2 in stock $29.33
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 2 in stock $34.18
Cat: 719687 Rel: 02 Sep 19
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
 6 in stock $37.41
Cat: 719673 Rel: 02 Sep 19
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $25.83
Cat: 745620 Rel: 17 Sep 19
 
Basic 8-bit drum sound generator
Notes: DRUMKIT 010 consists of 11 8-bit drum sound samples; 6 of them can be triggered in parallel in any combination by the trigger inputs. With a BANK selector knob, different combinations of the 11 samples can be selected. The PITCH knob affects the pitch of all instruments together, and with the REVERSE button the sounds are played backwards - quite a nice effect to be added here and there.

Don't expect high quality from this module - it's by design a nasty, lo-fi drum sound source, but definitely with its own character. Works great together with the analogue KICK module.
Read more
 7 in stock $55.97
Click for better price!
or call +44 20 7424 1960
quote 745620
Cat: 719657 Rel: 02 Sep 19
 
Filter module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
 1 in stock $36.59
Cat: 719658 Rel: 02 Sep 19
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
 6 in stock $38.75
Items 101 to 150 of 180 on page 3 of 4
«  1  2  3  4  »

Filter

Synth modules
Equipment
Release Date
Close