100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Studio power supplies

View:
Options
Items 1 to 15 of 15 on page 1 of 1
Subscribe to our weekly DJ Equipment emails
Cat: 527767 Rel: 14 Apr 14
 
UK mains 240V - 12V current converter for Access Virus TI models
Notes: New replacement power adapter for Access Virus Models that use 12vdc power supplies.

Converter block has figure-of-8 connector and converts a 240V UK mains current to 12V for compatible Access Virus TI models.
Read more
out of stock $20.11
AKG
Cat: 567338 Rel: 23 May 12
 
B-STOCK: Box opened, product in perfect working order
Notes: *** B STOCK - Box opened, product in perfect working order ***

The B 29 L powers 1 or 2 C 4..L version MicroMic III Series microphones (except for the D 409 L which requires no phantom power).

The B 29 L features an on/off switch and status LED as well as a mic/line selector for matching the output level to the input of the connected mixer or recorder, etc. The B 29 L operates on 1 standard 9V battery. Average battery life is 50 hours. 2 volume controls allow you to balance the levels of the 2 microphones. A supplied clip makes it easy to attach the B 29 L to a belt or guitar strap, etc.
Read more
out of stock $47.64
Cat: 458002 Rel: 02 Jun 12
 
Replacement phantom power supply, with 18V DC adapter
Notes: Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48V all the way down to 9V. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be more is better.

For example, a 24V condenser mic will run perfectly on 48V. In fact, mics rated at as little as 9V can often operate on 48V, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48V mic, you would obtain best results with 48V of phantom power. The Phantom is a great choice for the above needs.
Read more
out of stock $33.37
Cat: 729417 Rel: 11 Jan 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Protect your electronic equipment with this 19" rack mountable power conditioner featuring an RFI/EMI filter. The filter works by preventing noise from florescent lights, certain dimmers and similar sources of electronic pollution contaminating the AC line and leaking into sensitive audio, video or computer circuits. In addition; the front panel features two LED lamps with dimmer control for illuminating your rack.
Read more
out of stock $49.19
Cat: 570769 Rel: 16 Sep 14
 
B-STOCK: Box opened, product in perfect working order
Notes: *** B STOCK - Box opened, product in perfect working order ***

Current compatible products:

BP355
EX7
HarmonyMan
JamMan Delay
JamMan Stereo
Live 3
Live 5
RP155
RP255
RP355
RP500
RP1000
TimeBender
Vocal 300
Whammy


Discontinued compatible products:

Jimi Hendrix Experience-JHE
Brian May-XAS-BM
JamMan
GNX1
RP100-350
RPx400
BP200
Vx400
EXH
VL2
VL4
Read more
out of stock $20.91
Cat: 563731 Rel: 10 Mar 15
 
AC to DC adapter for Intellijel TPS80W triple power supply
Notes: AC to DC Adapter (Mean Well GS90A15-P1M)

- 90 Watt AC-DC power supply with universal AC input range

- Built-in active PFC (Power Factor Correction) function, PF>0.91
(Green initiative for highest efficiency and minimum line-induced noise)

- Protection from Short circuit/Overload/Overvoltage/ Over temperature

- 2 year warranty

* Uses 2.5mm x 5.5mm barrel connector

This is the recommended PSU for the TPS80W

PLEASE NOTE: Requires 3 Pin Kettle Plug/UK Mains Connector (not supplied).
Read more
 1 in stock $44.46
Click for better price!
quote 563731
MIDI Solutions Power Adapter (MIDI power adapter)
Cat: 592382 Rel: 10 Nov 15
 
Power Adapter for MIDI Solutions products
Notes: This power adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of items are being chained in series. It has an optically isolated MIDI In, MIDI Thru, and power connection for a 9V (AC or DC) wall adapter. It's possible to power up to 20 MIDI Solutions products from the power adapter's single Thru output. It can also be used in a transmitter/receiver configuration to send MIDI over long distances.
Read more
 3 in stock $44.47
Click for better price!
quote 592382
Cat: 484848 Rel: 03 Apr 13
 
Replacement UK power supply for all moogerfooger analog effects
Notes: Replacement UK power supply for all moogerfooger analog effects.
Read more
out of stock $21.44
Cat: 647540 Rel: 28 Apr 17
 
Power conditioner for use with pedals & pedalboards
Notes: Designed especially for the use with effect pedals and pedalboards, the Purifier minimizes and removes noise induced by poor DC power adapter construction delivering clean DC power to your stompboxes. It provides standard 2.1 x 5.5 mm barrel jack connectors and automatically detects your DC power supply's polarity. The Purifier cleans any output voltage from 5 to 30 volts DC.
Read more
 2 in stock $20.65
Cat: 630598 Rel: 17 Nov 16
 
Official Dave Smith Instruments power supply for the Tempest drum machine and Poly Evolver keyboard and rack models
Notes: Dave Smith Instruments Tempest & Poly Evolver Keyboard replacement power supply For North America, Europe & UK. Designed to power the Dave Smith Instruments Analog Keyboard/Digital Synthesizer.

Official Dave Smith Instruments 15-volt power supply for:

- Tempest
- Poly Evolver keyboard
- Poly Evolver rack



Read more
out of stock $27.79
Cat: 617921 Rel: 22 Jun 16
 
AC power adapter for Tascam products, with 3-pin UK plug
Notes: Direct connection:
DR-1, GT-R1, DR-2d, DR-07, DR-V1HD, DR-100, DR-100MK2, DP-004, DP-006, DP-008, DP-008EX, CD-GT2, CD-BT2, CD-VT2, MP-GT1, MP-BT1, MP-VT1, GB-10, LR-10, PT-7, US-2x2

Using DC to mini-USB conversion cable:
GB-10, LR-10

Using DC to mini-USB conversion cable:
DR-03, DR-05, DR-07MK2, DR-40, DR-22WL, DR-44WL, DR-60D, DR-60DMK2, DR-70D, DR-7

Input power: AC100-240V, 50/60Hz
Output power: 5.0V, 2A
Read more
out of stock $29.65
Cat: 602384 Rel: 03 Mar 16
 
9V power supply for TC effects pedals - ships with UK, EU & US style plug adapters
Notes: AC/TC:
One of the most frequent questions we receive from our users is, "How do I make sure that I supply my TC effect pedal with the correct amount of power?" Questions surrounding Voltage and Milliamps are probably some of the most important, since too little can lead to noise, hum and unwanted tone degradation, while too much or the wrong kind of power can seriously damage your equipment.

With our new PowerPlug power supplies we've taken all the guesswork out of the equation for you, so you can be sure that your TC Electronic stompbox is only supplied with the correct amount of TC approved power every single time! So why spend time worrying about voltage? You got songs to write, gigs to play and solos to shred!
Read more
out of stock $24.88
Cat: 595825 Rel: 19 Jan 16
 
Passive bus board for distributing power to synth modules
Notes: The ZEUS Passive Bus Board is used to distribute power to modules coming from either the first generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers. The Passive Bus Board contain both standard quick fit terminals as well as screw terminal block for connecting to power. The quick fit connect are mounted on the bottom side of the bus board to provide clean wiring, while the screw terminal blocks available simultaneously upfront for the most simple and easy connection to power if needed.

Although called Passive, the ZEUS Passive Bus board can produce up to 220ma of +5V supply by its own built in regulator, giving you the confidence that a 5V supply will be there for you in case one of your new modules requires it.

NOTE: This board does not interface with Zeus Studio Bus
Read more
out of stock $31.24
ZVEX Effects Power Plate (probe) (power supply adapter)
Cat: 613212 Rel: 03 Jun 16
 
Adapter for older ZVEX pedals to accept 9V DC (center negative) power input
Notes: With these you may modify older ZVEX pedals to accept 9v DC (center negative) power input. This type will fit all Probe models.
Read more
out of stock $30.70
ZVEX Effects Small Power Plate (power supply adapter)
Cat: 613211 Rel: 03 Jun 16
 
Adapter for older ZVEX pedals to accept 9V DC (center negative) power input
Notes: With these you may modify older ZVEX pedals to accept 9v DC (center negative) power input. The standard type will fit all models except Probes.
Read more
out of stock $42.34
Items 1 to 15 of 15 on page 1 of 1

Filter

Studio power supplies
Equipment
Close