Secure shopping 100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping 100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 34 of 34 on page 1 of 1
ERM Multiclock Desktop Sync Clock Device With USB
 Add to cart
 5 in stock $489.19
Cat: 600727 Rel: 15 Feb 16
 
Professional conversion box for syncing multiple hardware devices
Notes: Professional Sync:
The multiclock solves your sync issues in the studio and on stage once and for all.
Synchronisation of the multiclock to a DAW relies on a sample accurate audio clock stream, which in consequence guarantees absolutely tight clock signals with i1 sample of jitter.
Moreover, you can use it as a standalone generator or hook it up to follow other MIDI, DIN or analog master clocks.

Shift & Shuffle:
To compensate for any time lag of connected gear, you can shift each output channel individually and in realtime back and forth relative to the master clock.
The shift range is completely configurable and has a maximum of i400ms, the resolution is 20us.
If you have set your machines up to be on the spot, start playing with shuffle. Again, individually for each channel and in realtime.

Midi, Din, Modular & LFO:
Each channel can be set to either emit MIDI Clock, DIN sync (sync24) or analog clock.
Analog clock signals are configurable in polarity, start/reset behaviour and feature a flexible clock divider. An analog LFO is available with various waveforms and a range of 0-5V.
If you got them configured, channel settings can always be named and saved as a preset for later recall. Just in case you have a lot of gear.

USB Add-On
If you want, you can have your multiclock with an extra class-compliant USB Midi Add-On.
This enables you to send any MIDI commands from a DAW to your connected slaves while syncing to audio clock.
There is one virtual MIDI output for each channel and all commands are priority-merged with the accurate clock.
Read more
MOTU MIDI Express XT MIDI Interface Patchbay
 Add to cart
 4 in stock $375.03
Cat: 440724 Rel: 14 Nov 11
 
8-input/8-output MIDI interface, patchbay and merger with time code sync
Notes: Built with MOTU's award-winning MIDI interface technology, the MIDI Express XT is a professional MIDI interface and SMPTE synchronizer that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer.

The Express XT provides 8 MIDI inputs, 9 MIDI outputs, 128 MIDI channels and compatibility with all Mac and Windows software. 16 convenient, one-touch presets (8 x factory and 8 x user programmable) give you instant front-panel access to multiple operational configurations.

The included ClockWorks console software for Mac OS X and Windows provides comprehensive MIDI routing, merging and muting.

As a professional-grade SMPTE time code synchronizer, the Express XT converts and stripes SMPTE in all frame formats (23.976, 24, 25, 29.97 drop and non-drop, and 30). SMPTE jam sync with adjustable freewheeling provides glitch-free sync.

The Express XT also supports MIDI Machine Control (MMC), with the ability to serve as either an MMC master or slave. The Express XT can distribute MMC transport commands to all other connected MMC devices.

Connect a foot switch to the convenient front-panel pedal input and then program it to generate MIDI data when pressed. Send the data to any connected devices. For example, you could send MIDI patch changes to synths and sound modules during live performance.

The MIDI Express XT takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express XT's internal international power supply delivers reliable performance and professional operation.

No other MIDI interface offers this much value and performance at such an affordable price.
Read more
MOTU MIDI Express 128 MIDI Interface Patchbay
 Add to cart
 3 in stock $223.19
Cat: 452150 Rel: 30 Apr 12
 
8-input/8-output MIDI interface compatible with Mac and Windows
Notes: The MIDI Express 128 is an 8-input/8-output MIDI interface compatible with Mac and Windows.

Built from the same technology found in MOTU's flagship MIDI Timepiece, the MIDI Express 128 is a professional MIDI interface that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer. The Express 128 provides 8 x MIDI input, 9 x MIDI output, 128 x MIDI channels and compatibility with all Macintosh and Windows software.

The MIDI Express 128 takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express 128 is powered by USB, no wall wart or AC plug.

No other MIDI interface offers this much value and performance at such an affordable price.

Read more
Audiowerkstatt Trigger 2 MIDI 2 Trigger Converter
 Add to cart
 2 in stock $208.12
Cat: 667897 Rel: 30 Oct 17
 
Converts analog trigger clock signals to MIDI clock signals & vice versa
Notes: If used as trigger-clock-to-MIDI-clock-converter or MIDI-clock-to-trigger-clock-converter, there is always a MIDI-clock-signal (incl. start/stop) sent at the "midi out"-jack. At the tip of the "clock"-phone-jack, an analog trigger-clock-signal (v-trigger: 0v/5v, s-trigger "open"/"closed") is sent. The tip of the "start/stop"-phone-jack is 5v while the masterclock is running and 0v while the masterclock is paused for v-trigger and "closed" while the masterclock is running and "open" while the masterclock is paused, if s-trigger is used.

A clock-source can be connected to the "midi in"-jack or to the ring of the "clock"- and "start/stop"-phone-jack.

Normal insert-cables can be used to connect the analog inputs/outputs. If only the analog outputs are used, normal phone-jack-cables (mono or stereo) can be used.

The following parameters can be adjusted:

1. Clock-source (MIDI-clock or analog trigger-clock).
2. Trigger-type of the analog input (s-trigger or v-trigger).
3. Trigger-type of the analog output (s-trigger or v-trigger).
4. Clock-divider of the incoming analog trigger-clock (1/4, 1/8. 1/16 or 1/32).
5. Clock-divider of the outgoing analog trigger-clock (1/4, 1/8. 1/16 or 1/32).
6. Pulse-length of the outgoing analog trigger-clock (adjustable in 6 steps, the pulse-length is calculated dependent on clock-divider and clock-frequency).

In addition to the clock-signal, start-/stop-signals from the masterclock are detected and processed, but it is also possible to send start-/stop-signals manual.

The settings for the analog output (trigger.type out, clock.divider out and pulse.length) can be changed without losing synchronisation, while the masterclock is running.

The audiowerkstatt trigger2midi2trigger can also be used as a tool for analog-trigger-signals, if it isn't used as a converter.

The following uses are possible:

a) "S-trigger" to "V-trigger" converter
b) "V-trigger" to "S-trigger" converter
c) Analog clock-divider
d) Analog clock-multiplier
e) Gate to trigger converter
f) Trigger to gate converter with adjustable gate-length
Read more
Kenton Pro DCB Mk3 MIDI To DCB Converter *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
 2 in stock $187.19
Cat: 443845 Rel: 16 Jan 12
 
Bi-directional MIDI-DCB interface, including 14 pin DCB lead
Notes: The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8 (must have an existing DCB 14 pin). Just plug in and go.

As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.

2 x 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the selected DCB lead.

*Supplied with UK 3-pin power adapter
Read more
ERM Midiclock+ MIDI Master Clock
 Add to cart
 3 in stock $186.09
Cat: 531918 Rel: 08 Sep 14
 
Jitter-free MIDI masterclock for hardware gear or synchronisation with DAWs
Notes: Sync all your sequencers with ease and control the BPM - that's what we designed the midiclock for!

It's an ultra-stable hardware MIDI-Masterclock generator & has a great knob to give you full control over the tempo of your performances.

The midiclock generates incredibly accurate MIDI Clock messages.

It has two DIN MIDI outputs to connect to your gear. The clock signal can be distributed to more than two slaves by using MIDI Thru and you can start and stop everything with a single button.

Simply attach all devices that have MIDI Clock slave capabilities: Sequencers, synthesizers, drummachines and software like 'Live' from Ableton.

How to actually set the current BPM depends on the operating mode:

While using 'Live' mode, the BPM change immediately by turning the knob. You can use this mode if you want to make smooth tempo changes in your performance and are aware, that every turn of the knob changes the BPM.

In the 'Normal' mode, the changed value must be confirmed with a single click of the knob. This mode is perfect if you want to set your tempo once and simply need a stable clock signal. Accidental turning of the knob doesn't affect your BPM.
Read more
MIDI Solutions Dual Footswitch Controller
 Add to cart
 3 in stock $178.38
MIDI Solutions Dual Footswitch Controller (MIDI footswitch controller)
Cat: 592369 Rel: 16 Nov 15
 
1/4" connection to an external dual footswitch or two contact closures which can be used to trigger MIDI events
Notes: The MIDI Solutions Dual Footswitch Controller provides a 1/4" stereo phone jack input for connection to an external dual footswitch or two contact closures which can be used to trigger MIDI events. Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Dual Footswitch Controller.

Triggered event types are programmable and include:
Note
Control Change
Pitch Bend
Program Change
Start/Stop
System Exclusive

Other functions include:
Program Change INC/DEC
Rechannelize
Transpose
Tap Tempo
Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of each footswitch can be determined automatically on power-up, or can be programmed to normally-open or normally-closed. It's also possible for the Dual Footswitch Controller to send out the state of its footswitches immediately on power-up rather than waiting for each to be depressed.

The Dual Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the MIDI Solutions Programming Tools software. Once programmed, its settings are retained even after power is removed. The Dual Footswitch Controller can be reprogrammed with new settings as often as needed.

The Dual Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
Kenton THRU25 MIDI Thru Box *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
 4 in stock $169.57
Cat: 584896 Rel: 21 Sep 15
 
1 MIDI in to 25 MIDI thru sockets, works for ALL MIDI messages including Clock, SysEx, MTC etc
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
MIDI Solutions Event Processor Plus
 Add to cart
 2 in stock $168.47
Cat: 524241 Rel: 17 Mar 14
 
Compact MIDI event processor with a wide variety of functions
Notes: The MIDI Solutions Event Processor Plus offers all of the functionality of the MIDI Solutions Event Processor, with 32 settings instead of the Event Processor's 10, and 8 variable storage locations instead of the Event Processor's 2. Each of the Event Processor Plus's 32 settings can be programmed with a unique MIDI processing function. By combining these settings the Event Processor Plus becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor Plus works by comparing each incoming MIDI event with each of its 32 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor Plus becomes an extremely powerful tool capable of achieving virtually any combination of MIDI-processing functions.

Following is a list of the Event Processor Plus's functions, but better yet download the Event Processor Plus Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor Plus. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

Filter MIDI Events

Map MIDI Events

Trigger MIDI Events

Cycle Through a Sequence of MIDI Events

Turn Settings On and Off

Store Incoming Values in Variables


The Event Processor Plus is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the Event Processor Plus Programming Tools software. Once programmed, the Event Processor Plus's settings are retained even after power is removed. The Event Processor Plus can be reprogrammed with new settings as often as needed.

The Event Processor Plus is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
Audiowerkstatt MIDI Clock Shifter
 Add to cart
 2 in stock $164.07
Audiowerkstatt MIDI Clock Shifter (MIDI clock shifter)
Cat: 667904 Rel: 30 Oct 17
 
Move your MIDI-slave forward or backward, while running in synchronisation to your MIDI-master
Notes: The audiowerkstatt midi-clock-shifter helps you to move your MIDI-slave as many MIDI-clock-ticks as you want forward or backward, while running in synchronisation to the MIDI-master. A 7-segment-display shows the direction and number of MIDI-clock-ticks, the MIDI-slave has been moved.

A tool, for on-the-fly correction of a MIDI-slave, that is not reliable or to push a loop, that is not recorded in a rhythm, to that rhythm.
And a tool to have fun with playing around with two sequencers and do things like e.g. going slightly forward and backward with one of them.

You can set whether only the MIDI-clock and MMC commands (start, stop, continue) are sent or the MIDI-data, received at the MIDI-in, will be mixed with that.
Read more
Kenton Merge 8 Intelligent MIDI Merge Box *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
 3 in stock $157.46
Cat: 650248 Rel: 22 May 17
 
MIDI signal mixer unit featuring 8 input connectors
Notes: Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).

- 8 opto-isolated MIDI Ins
- 2 MIDI Outs

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
Audiowerkstatt MIDI Restarter
 Add to cart
 2 in stock $153.06
Cat: 667906 Rel: 30 Oct 17
 
Start or stop your MIDI-slave independent of your MIDI-master, but alway in perfect synchronisation
Notes: You push the button and the audiowerkstatt midi-restarter sends a MIDI-start/stop-message at the beginning of the next bar to ensure that all following MIDI-devices run in the correct timing.

There are 3 modes of operation:

1. At the beginning of the next bar, a MIDI-stop-message and immediately after that a MIDI-start-message is sent. In this mode, a standing sequencer is restarted and a running sequencer is "pushed" into the correct timing. This mode does not work with all MIDI-devices as some devices require a short break between MIDI-stop- and MIDI-start-message. For these devices, the second mode can be selected.

2. A short time before the next bar starts (one MIDI-clock-message=1/24 quarter-note), a MIDI-stop-message is sent and then at the next bar a MIDI-start-message is sent. In this mode, a standing sequencer is restarted and a running sequencer is - after a very short break - "pushed" to the correct timing. This mode corresponds to the first and is intended for MIDI-devices that require a short break between MIDI-start- and MIDI-stop-message.

3. If the sequencer is running, a MIDI-stop-message is sent at the next bar and if the sequencer is standing, a MIDI-start-message is sent at the next bar. In this mode, a standing sequencer is restarted and running sequencer is stopped at the next bar.

It can be switched between the time-signatures 4/4 and 3/4.

You can also set whether only the newly created MIDI-clock and the MMC commands (start, stop, continue) are sent or the MIDI-data, received at the MIDI-in, will be mixed with that.
Read more
Kenton Pro CV To MIDI Single Synth CV To MIDI Converter *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
 3 in stock $149.75
Cat: 656385 Rel: 10 Jul 17
 
High specification CV to MIDI converter - designed to work with all types of CV inputs
Notes: - CV & Gate inputs on 3.5mm mono jack sockets
- A to D conversion for main CV input is 16 bit high quality ADC
- V/octave, Hz/V or 1.2V/oct modes selectable
- Gate type can be selected as Gate or S-trig
- Aux1 & 2 inputs on 3.5mm mono jack (continuously variable or switch selectable)
- Auxes can select controller number
- Auto tune feature makes setup easy
- MIDI Out on 5 pin DIN socket
- Non-volatile memory EEPROM (no back-up battery required)
- 32 bit ARM processor

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
Kenton Pro Solo MkII MIDI To CV Converter *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
$157.47 SAVE 10%
 8 in stock $141.72
Cat: 378960 Rel: 18 Jan 10
 
High specification single synth MIDI to CV converter
Notes: The Pro-Solo is designed to control one monosynth and features a single CV & Gate output, fully programmable auxiliary CV output and 1 LFO. Editing is easy with its LED display and non-volatile setup memory. The Kenton Pro Solo MkII can also be used as a Sync 24 and arpeggio clock converter.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
MOTU Micro Lite MIDI Interface Patchbay
 Add to cart
 3 in stock $140.95
Cat: 437471 Rel: 17 Oct 11
 
5-in/5-out MIDI interface, compatible with Mac and Windows
Notes: Built from the same technology found in MOTU's flagship MIDI Timepiece, the Micro Lite is a professional MIDI interface that provides portable, plug-and-play connectivity to any USB-equipped Mac or Windows computer.

The Micro Lite provides 5 MIDI inputs, 5 MIDI outputs, 80 MIDI channels and compatibility with all Mac and Windows software. Large front-panel LEDs illuminate to indicate MIDI activity.

The Micro Lite takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Micro Lite is powered by the USB port i no wall wart or AC plug.

With its attractive yet rugged metal casing, the Micro Lite slides easily into a shoulder bag or briefcase for ultra-compact portability and convenient desktop operation. Removable rack attachments, as well as a custom center-joint fastener, are included and allow you to easily mount 2 Micro Lites side by side in a standard 19" equipment rack.

No other MIDI interface offers this much value, performance and portability at such an affordable price.

Read more
MIDI Solutions Pedal Controller
 Add to cart
 1 in stock $133.23
Cat: 524242 Rel: 17 Mar 14
 
Compact MIDI unit for generating MIDI data using an external expression pedal
Notes: The Pedal Controller accepts an expression pedal (such as the Yamaha FC7 or Roland EV-5 or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup.

The Pedal Controller's factory default settings are for it to send CC#7 (volume) on MIDI channel 1, so if this is what you need the Pedal Controller to do then no programming is necessary - just insert the Pedal Controller in your setup and it's ready to use. The Pedal Controller can also be programmed to send other types of MIDI messages, for more info read on...

The Pedal Controller can be programmed to send:

Aftertouch

Pitch Bend

Control Change

System Exclusive

The Pedal Controller has a MIDI Echo parameter that is selectable on/off.

The Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. Small fluctuations are eliminated when the pedal is in a stationary position and no extraneous messages are sent out. When the pedal is moved slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many control wheels or knobs only update themselves every two or every four values, resulting in coarser control, and sometimes zipper noise.

Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.

The Pedal Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). Once programmed, its settings are retained even after power is removed. The Pedal Controller can be reprogrammed with new settings as often as needed. The Pedal Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON.

The Pedal Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.1 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
Audiowerkstatt MIDI Clock Multiplier
 Add to cart
 2 in stock $126.62
Audiowerkstatt MIDI Clock Multiplier (MIDI clock multiplier)
Cat: 667895 Rel: 30 Oct 17
 
Clock multiplier for the MIDI clock
Notes: The audiowerkstatt midi-clock-multiplier multiplies the MIDI-clock of the MIDI-master, whereby the MIDI-slave runs correspondingly faster. The multipliers are 1x, 2x, 3x, ..., 8x, 9x.

If the multiplier 1 is selected, the MIDI-clock is simply passed through. With the multiplier of e.g. 2 the MIDI-slave runs at double speed. So 16ths-notes will be 32th-notes.

Very useful if you have a very slow song and want to add a new fast track to it, which is faster than the master-clock.

And good for polyrhythmik - especially for experimental musicians - if an odd division-factor is selected and MIDI-master and slave seem to be not in sync, but from time to time come together in perfect sync.

You can also set whether only the newly created MIDI-clock and mmc commands (start, stop, continue) are sent or the, at the MIDI-in incoming data, will be mixed with that.
Read more
Audiowerkstatt MIDI Clock Divider
 Add to cart
 2 in stock $126.62
Audiowerkstatt MIDI Clock Divider (MIDI clock divider)
Cat: 667908 Rel: 30 Oct 17
 
Clock divider for the MIDI clock
Notes: The audiowerkstatt midi-clock-divider divides the MIDI-clock of the MIDI-master, whereby the MIDI-slave runs correspondingly slower. The division-ratios are 1/1, 1/2, 1/3, ..., 1/8, 1/9.

If the division-factor 1/1 is selected, the MIDI-clock is simply passed through. With the division-factor of 1/2 the MIDI-slave runs at half the speed. So 16ths-notes will be 8th-notes and the loop is twice as long.

Very useful to double the loop length of the MIDI-slave (eg MIDI-sequencer or [audio-]looper). When using the division-factor 1/8 and an originally one bar long loop runs over 8 bars.

And good for experimental musicians, especially if an odd division-factor is selected and MIDI-master and slave seem to be not in sync, but from time to time come together in perfect sync.

You can also set whether only the newly created MIDI-clock and mmc commands (start, stop, continue) are sent or the, at the MIDI-in incoming data, will be mixed with that.
Read more
Audiowerkstatt DIN 2 MIDI 2 DIN Converter
 Add to cart
 2 in stock $126.62
Cat: 667903 Rel: 30 Oct 17
 
Converts the synchronisation signal known as DIN-Sync/Sync24/Sync48 to MIDI clock signals & vice versa
Notes: The audiowerkstatt din2midi2din has a MIDI- and a DIN-sync-output and on both outputs a clock-signal - sent at the same time.

With a button you can select, if the clock-signal present at the DIN-sync- or the MIDI-input is used. A LED indicates the selected input.

The device operates as a standard in "Sync24"-mode (24 clock pulses per quarter note). By holding the button when switching on, the device is started in "Sync48"-mode (48 clock pulses per quarter note).
Read more
MIDI Solutions Quadra Merge
 Add to cart
 1 in stock $121.12
MIDI Solutions Quadra Merge (MIDI interface)
Cat: 524234 Rel: 17 Mar 14
 
Compact 4 in 1 out MIDI merger
Notes: The MIDI Solutions Quadra Merge packs four MIDI inputs into a 4.5" x 2.5" x 1.25" package. All MIDI messages appearing at the four inputs of the Quadra Merge are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Quadra Merge is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
Audiowerkstatt DIN Restarter
 Add to cart
 2 in stock $116.71
Cat: 667901 Rel: 30 Oct 17
 
Stop & start the following DIN-Sync/Sync24/Sync48 device in perfect synchronisation
Notes: You push the button and the audiowerkstatt din-restarter starts or stops the following sequencer at the beginning of the next bar (4/4-stroke only) in perfect timing.

If the sequencer is running, it will be stopped at the next bar and if the sequencer is standing, it is started at the next bar.

The device operates as a standard in "Sync24"-mode (24 clock pulses per quarter note). By holding the button when switching on, the device is started in "Sync48"-mode (48 clock pulses per quarter note).
Read more
MIDI Solutions Beat Converter
 Add to cart
 1 in stock $109.02
MIDI Solutions Beat Converter (MIDI beat converter)
Cat: 592379 Rel: 16 Nov 15
 
Can be programmed to send out a Note or Control Change message on the beat in response to MIDI Clock messages
Notes: The Beat Converter can be programmed to send out a Note or Control Change message on the beat in response to MIDI Clock messages. This enables devices that only allow their tap tempo function to be controlled by a Note or Control Change message to be synchronized to devices that send MIDI Clock.

The Beat Converter is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Beat Converter Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Beat Converter can be reprogrammed with new settings as often as needed.

The Beat Converter is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information).
Read more
MIDI Solutions Beat Indicator
 Add to cart
 1 in stock $109.02
MIDI Solutions Beat Indicator (MIDI beat indicator)
Cat: 592381 Rel: 16 Nov 15
 
Contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages
Notes: The Beat Indicator contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages. An invaluable tool for enabling drummers or live musicians to keep time with MIDI sequences during breaks or intros. The flash can be advanced or delayed by up to 128 ms from the actual beat, and the brightness of the flash is programmable. The Beat Indicator can also be programmed to flash in response to a Note or Control Change message.

The Beat Indicator is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Beat Indicator Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Beat Indicator can be reprogrammed with new settings as often as needed.

The Beat Indicator is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). It is recommended that no more than one Beat Indicator be powered from a single MIDI Out or Thru, if other MIDI Solutions products are required in series with the Beat Indicator a MIDI Solutions Power Adapter is recommended.
Read more
Kenton MIDI USB Convertor Host MkII
 Add to cart
 2 in stock $98.10
Cat: 433906 Rel: 12 Sep 11
 
USB host to MIDI converter for 'Class Compliant' USB MIDI devices
Notes: Your USB device is plugged into the USB MIDI Host MkII instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

MIDI data received at the MIDI In socket will be sent to the USB device. MIDI data received from the USB device will be sent to the MIDI Out socket.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.
Read more
Future Retro 1x4x2 MIDI & Din Thru Box
 Add to cart
 1 in stock $97.45
Cat: 618634 Rel: 17 Oct 16
 
Output expander box designed specifically for Swynx
Notes: The 1x4x2 Thru box is an output expander designed specifically for the Swynx product, but can be used with all of our other products as well.

The Thru box allows you to pass both MIDI and DIN Sync data to four seperate devices simultaneously. MIDI Thru boxes are quite common, but 1x4x2 is the first to provide DIN Thru capabilities.

Power is provided via MIDI.

Note, this product does not convert MIDI clock messages to DIN Sync. For MIDI to DIN Sync conversion please see our Swynx product.
Read more
Kenton Merge 4 MIDI Merge Box *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
 9 in stock $93.70
Cat: 443853 Rel: 16 Jan 12
 
Merge MIDI box with 4 inputs/2 outputs
Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
Kenton D Sync Bi Directional MIDI To DIN Sync Converter
 Add to cart
 2 in stock $88.66
Cat: 578608 Rel: 13 Jul 15
 
Bi-directional MIDI to DIN Sync converter with 1 MIDI In & 1 MIDI Out / 1 Sync In & 1 Sync Out
Notes: Receives MIDI clock and stop/start data and converts them to DIN-Sync (Sync-24). Also converts DIN-Sync back to MIDI.

High quality Kenton MIDI MIDI to DIN-Sync converter box with opto-isolated MIDI In plus MIDI Out, Sync In & Sync Out sockets. Powered from a multi-region mains adaptor (wall wart) so you can fit and forget. Can also be powered from a USB socket (although not a USB product)
Read more
MIDI Solutions Merger 2 In 2 Out MIDI Merge Box
 Add to cart
 3 in stock $75.97
Cat: 524233 Rel: 17 Mar 14
 
Compact 2 in 2 out MIDI merger
Notes: The MIDI Solutions Merger is a 2-in 2-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the outputs (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
Kenton THRU5 MIDI Thru Box *SUPPLIED WITH UK 3-PIN POWER ADAPTER*
 Add to cart
 More than 10 in stock $64.97
Cat: 358433 Rel: 22 Jun 09
 
Thru box with 1 MIDI input to 5 MIDI thru. mains adaptor included
Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
Keith McMillen MIDI Expander
 Add to cart
 2 in stock $58.35
Cat: 477605 Rel: 24 Dec 12
 
MIDI interface
Notes: The KMI MIDI Expander enables you to use KMI gear such as SoftStep, 12 Step and QuNeo to control your MIDI hardware devices with 5-pin MIDI DIN connectors.

Plug in your MIDI devices to the KMI MIDI Expander and you're ready to send and receive MIDI data with or without a computer.

Read more
MIDI Solutions Quadra Thru
 Add to cart
 More than 10 in stock $57.25
MIDI Solutions Quadra Thru (MIDI interface)
Cat: 524237 Rel: 17 Mar 14
 
Compact 1 in 4 out MIDI thru box
Notes: The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
MIDI Solutions Thru Box (B-STOCK)
 Add to cart
 1 in stock $44.05
Cat: 593572 Rel: 17 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
MIDI Solutions Thru Box
 Add to cart
$48.44 SAVE 10%
 More than 10 in stock $43.60
MIDI Solutions Thru Box (MIDI interface)
Cat: 524235 Rel: 17 Mar 14
 
Compact 1 in 2 out MIDI thru box
Notes: The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
Moog Werkstatt 3.5mm CV Expansion Header
 Add to cart
 3 in stock $42.95
Cat: 551155 Rel: 02 Feb 15
 
Easy-to-install CV/Gate accessory for converting Werkstatt's patchable header into 3.5mm connections
Notes: The Werkstatt CV Expansion Board is an easily installed CV/Gate accessory for the Werkstatt 01. Once installed, the Werkstatt CV Expansion Board converts Werkstatt's patchable header into a grounded series of 3.5mm connections. This allows for streamlined integration with analog sequencers, modular synthesizers, and other CV equipped devices.

Package Contains:

- Expansion Board

- 2 Screws for installation

- Installation instructions
Read more
Items 1 to 34 of 34 on page 1 of 1
Equipment

Equipment

 
Release Date
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close