100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

DI boxes

View:
Options
Items 1 to 4 of 4 on page 1 of 1
ART Dual RDB Interface DI Box (audio/MIDI interface)
Cat: 450016 Rel: 18 Apr 12
 
Dual re-amping direct box
Notes: The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 1/4" instrument level inputs.

The unit has 2 x high quality isolation transformers that prevent ground loops when connecting various systems together.

The Dual RDB accepts 1/4" TRS and XLR line level inputs and outputs mic or instrument levels. The Dual RDB's variable level controls allow volume control to be set at the source rather than in the studio, AV room, audio closet or installation rack. A 20Hz to 20 kHz frequency response ensures the Dual RDB will function transparently with any high quality audio source.

Read more
 1 in stock $78.41
Click for better price!
quote 450016
Cat: 450026 Rel: 12 Mar 12
 
Dual channel active direct box, comes with super quality battery
Notes: The DUALXDirect provides 2 x independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via combo jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input Thru jacks allow for tapping off of your signal chain. The ground lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

The DUALXDirect's active circuitry is powered by phantom voltage from the output connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The power on/off switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.

The compact black-anodized all aluminum case and it's active design allow the DUALXDirect to provide years of trouble free service in live sound, permanent/fixed install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.

The Art ARTcessories DUALXDirect features

Fully active design
Phantom voltage or 9V battery powered
Converts high-impedance balanced / unbalanced inputs into 600 Ohm balanced outputs
Switchable input attenuation (0, -30 dB)
Switchable ground lift
1/4" TRS / XLR combo connector inputs
XLR connectors for balanced outputs
Rugged extruded aluminum case
Frequency Response: 10 Hz - 100 kHz, i 0.5 dB @ +0 dBu
THD: <.05% (typical)
Dynamic Range: >100 dB (typical)
Channel Separation: > 80 dB (typical)
Maximum Input Level: +4, +34 dBu
Maximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)
Input Connections: 1/4" TRS XLR female balanced / unbalanced (2), 470k Ohm
Thru Connections: 1/4" TRS (2)
Output Connections: XLR male balanced (2), <600 Ohm
Input Attenuation: Switchable, (0, -30 dB)
Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel)
Dimensions (DWH mm): 99 x 117 x 47
Weight: 0.38kg
Read more
 1 in stock $53.36
Cat: 677266 Rel: 29 Jun 18
 
DI box featuring active circuitry for ultra-low distortion & noise
Notes: From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage.

Great for active instruments like guitars and basses with active pickups and preamps, the MDB-1A Active DI features increased headroom and distortion-free operation. Featuring a 1/4" high-impedance input and thru with -20db pad plus a Merge switch that turns the Thru jack into a second input, perfect for summing a stereo source to a mono output. The balanced XLR output features switches for Polarity, Low Cut, and Ground Lift. For maximum convenience, the MDB-1A is powered by 48v phantom power.

Premium - without the price tag:
Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with 'Built-Like-A-Tank' construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes.

The Perfect Match:
With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A.

Premium Analog Circuitry:
MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source.

'Built-Like-A-Tank':
From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come.

Get the best sound from your laptop:
The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue.
Read more
 1 in stock $61.19
Cat: 647526 Rel: 28 Apr 17
 
Re-amplification box
Notes: A Reamping-Box is mainly used in studios. It allows you to play back a recorded guitar signal and send it to a guitar amp, where it can again be taken and recorded by the microphone. This way, the recording engineer can experiment with the sound of an instrument and different amplifiers at his leisure.

The DACCAPO box ensures optimal impedance matching and eliminates ground loop hum through the use of a transformer. The signal level to the amplifier can be adjusted with a volume control.
Read more
 3 in stock $67.91
Items 1 to 4 of 4 on page 1 of 1

Filter

DI boxes
Equipment
Release Date
Featured
Close