100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Home  Coming Soon  

Studio Equipment

Options
Items 1 to 50 of 277 on page 1 of 6
1  2  3  4  5  6  »
FORTHCOMING
Walrus D1 High-Fidelity Delay MAKO Series Pedal
Cat: 807710 Rel: 31 Mar 21
 
Delay/dual & stereo effects pedal
Notes: Feature-rich delay packed with inspirational delay algorithms. Digital, Analog, Lo-fi and Slap Back help go from rhythmic riffs to warm, murky repeats.

The first in the Mako series, the D1 is a powerful multi-function delay with five, studio grade, high-fidelity, custom tuned programs. The programs are Digital, Mod, Vintage, Dual and Reverse. Each can be tuned and tweaked with modulation, tone, age, and subdivisions. The attack knob adds another dynamic to each program, opening up a new world for creating soundscapes. The D1 boasts stereo in and out, midi control and on-board presets. A workhorse of a delay that is just as ready for the road as it is the studio.

Programs

Each program can be fully customized to your taste and playing style with the Tweak knob. Flip the toggle switch to Mod to bring in a tasteful modulation to your delay trails. Tone will brighten or darken your delay trails. Age will add some grit and wear reminiscent of vintage delay units. Subdivisions can be easily changed between quarter, eighth and dotted eighth.

Digital - The Digital delay program offers a clean and crystal-clear delay that is perfect for rhythmic guitar parts where ultra-defined echoes are desired.

Mod - The Mod delay progam has unique modulation LFOs applied to the repeats that are random and run at multiple rates to create unpredictable pitch modulation. This results in very unique sounding repeats perfect for warping minds and scattering trains of thought.

Vintage - The Vintage program allows for analog delay inspired tones to be achieved with complex filtering applied to the repeats. Use the tone knob at low settings for darker filtering and at higher settings to roll off low end.

Dual - The Dual program employs two delays in parallel, each with different time divisions. When connected in mono, the two delays are added together. When connected in stereo, one set of repeats is sent to the left output and one set is sent to the right. The division switch has unique functionality in Dual mode. We'll break it down for you below:

In the quarter note position, the D1 offers 1/4 note and 1/4 triplet repeats.
In the eighth note position, the D1 offers 1/8 note and 1/4 triplet repeats.
In the dotted eighth note position, the D1 offers 1/4 note and .1/8 repeats.
Reverse - The Reverse program reads the delay memory backwards creating a unique delay repeat character known as reverse delay.

Presets:

The D1 is capable of saving up to nine on-board presets and up to 128 are accessible via midi. Onboard presets are accessible with the bank switch. Cycle between presets in each bank by pressing bypass and tap at the same time. You will see the tap LED change from Red to Green to Blue. Any adjustments made in a preset will change the tap LED to purple to show that you have edited the preset. Refer to the manual for accessing and saving presets via midi.

Attack:

The Attack knob will soften the attack of the echoes. Dreamy and ethereal soundscapes can be created with higher repeat and attack settings.

Bypass and Tempo Modes:

The D1 has three different bypass modes. True bypass, DSP+True Bypass (trails), and DSP Bypass. The D1 offers global and preset tempo modes. Global mode keeps the tempo the same when changing presets. Preset tempo will use the delay time that was stored when the preset was saved. Refer to the manual for more info on switching modes.

Momentary Functions:

Press and hold the bypass switch to ramp up the repeats of the delay. Release to set the feedback back to the knob location.

A world-class delay with lots of sounds

The D1's programs are Digital, Mod, Vintage, Dual and Reverse. Each can be tuned and tweaked with modulation, tone, age, and subdivisions. The attack knob adds another dynamic to each program, opening up a new world for creating soundscapes. The D1 boasts stereo in and out, midi control and on-board presets. A workhorse of a delay that's just as ready for the road as the studio.

5 Unique Programs:

The Digital delay program offers a clean and crystal-clear delay that is perfect for rhythmic guitar parts where ultra-defined echoes are desired.
The Mod delay program has unique modulation LFOs applied to the repeats that are random and run at multiple rates to create unpredictable pitch modulation. This results in very unique sounding repeats perfect for warping minds and scattering trains of thought.
The Vintage program allows for analog delay inspired tones to be achieved with complex filtering applied to the repeats. Use the tone knob at low settings for darker filtering and at higher settings to roll off low end
The Dual program employs two delays in parallel, each with different time divisions. When connected in mono, the two delays are added together. When connected in stereo, one set of repeats is sent to the left output and one set is sent to the right. The division switch has unique functionality in Dual mode.
Read more
MRP:$384.37 SAVE 18%
coming soon $315.78
FORTHCOMING
Cosmotronic Cosmix Aural Enhancing Stereo Mixer Module
Cat: 803497
 
Distortion/dual & stereo/mixer/dynamics/effect/panning synth module
Notes: Cosmix is an 8-channel stereo mixer with a built in analog stereo dual band maximizer.

It has four mono channels and two stereo channels, the left inputs 5 and 7 are normalised to the right inputs 6 and 8 respectively.

The four mono channels have panning- and aux send controls.

All channels are accommodated with a dedicated mute switch for live performance.

The aux output can be routed to an external effect and the four small switches below the volume faders set whether the signal that is routed to the aux bus is pre or post fader.

The master bus can optionally be fed into the stereo Drive circuit.

This circuit is true stereo, and improves almost any sound source, with full bass and amazing spatial resolution.

It works like a dual band maximizer, with separate faders for high and low frequencies.

The analog overdrive circuit can be bypassed but we don't recommend it as it sounds great and really glues the whole mix together nicely.

The overall volume can be set with the main volume knob.

The output of the compressor feeds into a diode clipping circuit, to to create a warm saturated distortion.

By playing with the levels of each channel different clipping characteristics can be achieved.

However if you prefer to keep the output signal clean, the bypass switch allows you to bypass the circuit.

The white lines indicate the non-distorted 0dB point for each channel, when the drive circuit is active and the sliders are set to zero.

Driving a channel above the white line pushes it into more overdrive and distortion, assuming 10vpp Eurorack level.

Different tones can be created by playing around with the gain staging!

Main output is eurorack level (10vpp)
Input impedance: 100k
Output impedance: 1k

70 mA +12V
70 mA -12V
0 mA 5V
20 mm deep
Read more
coming soon $268.23
FORTHCOMING
Rides In The Storm Modules DPM Dual Passive Multiple Module
Cat: 805806 Rel: 01 Feb 21
 
Dual passive multiple module
Notes: DPM Dual Passive Multiple Module

Three 3.5mm inputs and two 6.3mm outputs or vice versa.

Rackspace: 4HP
Read more
coming soon $47.52
FORTHCOMING
Rides In The Storm Modules SUN Compact Eurorack Power Adapter Module
Cat: 805807 Rel: 01 Feb 21
 
Eurorack power adapter module
Notes: Rides In The Storm Modules SUN Compact Eurorack Power Adapter Module
Read more
coming soon $183.34
FORTHCOMING
Modulaire Maritime Decca Voltage Source/Manual CV Gate/Muting Control Module
Notes: This module is a manual control module for modular synth. Thought for live performance or to bring more manual control while recording in "one take" the module is, at the same time:

-Voltage source
-Manual CV-Gate
-Muting - Control module

Details & use:

Two voltage source's outputs (at the top) provides voltages from 0 to 5V*. Those voltages are buffered thru op-amp and are controllable by potentiometers. Each have a dedicated button-switch so the selected voltages can be applied precisely (for exemple applying it on filter's cv's, oscillator's fm, delay's cv, etc.) on one part of the sequence for eg. or at desired moment.
Those buttons are maintained (enable/disable, stays active when pressed) and are illuminated when "on".

The voltage sources, beside their use for manual cv modulation, are also very useful in all situation where fixed voltages are needed (to fix and keep desired cv amount, for the same accent on drum module for ex. or when using an external instruments who works on line level so much more quite than modular- once connected to a modular-you'll need a constant voltage to keep the VCA permanently open so that the instrument can reach the modular's level and you can hear it, use it normally, etc.

The four grey button-switches (on the sides) are the simple manual gates and are momentary with no latency. They will send gate signal as long as you keep them pressed (led indicated).
You'll use them to trigger manually an envelopes, play drum modules for eg, apply it on any other cv/gate input..

The three illuminated button-switches have inputs so they can be used to mute signals.

The two on the bottom are maintained while the one in the middle is momentary - for the bigger flexibility of use. The button's leds will indicate the signal going thru.

You'll use those switches to stop, mute one signal let go another one, break a sequence's gate with another one from the another switch, etc. -all under your fingers!

If nothing is plugged in the inputs of those switches they'll find their manual gate use-just like their neighbor buttons.

Made for more fun with a modular!
Read more
MRP:$137.18 SAVE 36%
coming soon $88.27
FORTHCOMING
Rides In The Storm Modules TUL Dual Attenuverter & Offset Generator Module
Cat: 805793 Rel: 01 Feb 21
 
Dual attenuverter/offset generator module
Notes: TUL Dual Attenuator/-verter and Offset Generator

Temperature stable and accurate circuit design. The attenuator is exponential and can be regulated more precisely in the initial range.

As an attenuverter, the fader describes an S-curve, i.e. it is in Range +/- 0 finer adjustable. The AC gain is 1, so there is no loss at maximum Att/Attv settings.

The offset potentiometer shift by +/- 5 volts and can be switched to another mode on the back of the PCB using jumpers.

Here the attenuation is towards zero made until it is zero.

The normal mode leaves the voltage at the specified offset value.

Channel A is normalized to channel B so you can get two different CVs.

On the rear side of the PCB, you have a jumper to switch from offset pre fader (good for ADSR) and post fader.

Power consumption: +/- 20mA

Rackspace: 6HP

CV out is (-/+5Volt) if nothing is patched to IN A/B, so you can use it as a manual CV source.
Read more
coming soon $74.69
FORTHCOMING
Rides In The Storm Modules CON Quad Gain Converter Module
Cat: 805794 Rel: 01 Feb 21
 
Quad gain converter module
Notes: Two channels from line level to modular level and two channels from line level to modular level. Very low noise and low distortion circuit while preserving the transients.

Rackspace: 2HP
Read more
coming soon $74.69
FORTHCOMING
Gamechanger Audio Plasma High Voltage Distortion Rack Unit
Cat: 807417 Rel: 15 Feb 21
 
Distortion rack unit
Notes: The PLASMA RACK is a 1U sized high-end audio effects unit designed for professional and studio use.

At its heart is the unique High Voltage Distortion concept - a brand new way of analog signal processing developed in 2018 by Gamechanger Audio.

By using a High voltage step-up flyback transformer, PLASMA RACK turns your instrument's signal into a rapid series of electric discharges in a Xenon-filled tube. These powerful discharges (up to 5500 Volts) then get picked up by a specially designed electromangatec receiver and turned back into audio-level signal. This process results in a large amount of punishingly heavy distortion, and also saturates the sound with a wide range of harmonics and overtones.

The harmonic artefacts, created as a byproduct of the high-voltage discharge are uncommon in traditional signal amplification, and therefore PLASMA distortion is unlike anything you have heard before.

The way PLASMA Rack reacts with different instruments and sound sources simply cannot be recreated with any other analog machine, plugin or by digital sound modeling.

3 BAND EQ

Gives you more and control over key PLASMA frequencies.
(10Hz, -20 to 20 dB LP Shelving Filter; 600Hz, -6 to 6 dB; 20kHz, -10 to 10 dB HP Shelving filter)

INPUT GAIN CONTROL

Can be used to fine-tune the PLASMA RACK for any type of input signal (adjusting to different pickups etc.)
(Preamp gain range -26dB to +12dB )

SUSTAIN MODE

Built-in adaptive compressor that lets you prolong the PLASMA Tube's output at Low-Voltage settings.

The resulting effect is like a long electrical sputter and is quite unpredictable and extraordinary.

OVERSATURATE MODE

Analog Octave up / Overtone effect achieved byoverpowering the PLASMA Tube.

This gives note attacks some serious Octavia-style upper harmonics, and also makes the whole sound extremely intense.

CLEAN GATE MODE

Use the PLASMA Tube's gating effect on any CLEAN Signal without the added Distortion.

Works great on all percussive instruments, as well as breaking up heavy reverbs and creating "bit-crush" type effects, but using an analog spark gap as a medium.

PLASMA TREMOLO/RINGMOD

A very unusual Tremolo circuit that takes full advantage of the PLASMA Tube's sputtery and abrupt bursts.

The Tremolo range goes from slow to full-on screaming Ring mod.

Also, features a Dynamic Tremolo mode (Trigger the Ring mod (or tremolo) effect on transients, or only as the sound starts decaying.

BUILT-IN DISTORTION CHANNEL

PLASMA sound blends very well together with a classic op-amp distortion, therefore the PLASMA RACK gives you access to a built-in distortion circuit to create a huge sound instantly.

The CLEAN GATE button applies the Tube's gating effect to the distorted channel.

3 FX LOOPS WITH SWITCHABLE LEVEL CONTROL

Modify the signal path by inserting external effects or plugins into various parts of the PLASMA Rack's signal chain.

FX LOOP 1 - affects the DRY signal only;
FX LOOP 2 - affects the WET signal only, before it goes into the PLASMA tube;
FX LOOP 3 - affects the WET signal only, after the PLASMA Tube.


CONNECTIVITY

INPUTS: 1 Unbalanced 1/4' TS Jack input (Instrument), 1 Balanced combo XLR/Jack input (with PAD)

OUTPUTS: 1 Balanced XLR & 1 Unbalanced 1/4' TS Jack

MIDI: In, Through, and Out.

FULL MIDI CONTROL + 8 PRESET SLOTS

Control all parameters and values via CC Messages and Program Change Messages.

PLASMA Rack also features 8 Preset slots for saving sounds - incl. button states and knob values.

Also, multiple PLASMA Racks can be synchronised via MIDI CC messages.

ASSIGNABLE EXPRESSION INPUT

Any potentiometer on the PLASMA Rack can be assigned to an Expression pedal.

SAVABLE UTILITY SETTINGS

Make your PLASMA Rack gig-ready by setting up the default boot-up states of all buttons and functions.
Read more
MRP:$1,900.12
coming soon $1,759.37
FORTHCOMING
Gamechanger Audio Footswitch for Plus Sustain Pedal
Cat: 807408 Rel: 15 Feb 21
 
Footswitch pedal for Gamechanger Plus Sustain
Notes: This is a special Footswitch that gives you quick and easy access to the PLUS Pedal's "WET only" mode.

Acting as a kill-switch for your instruments DRY signal (which is useful to have on your board anyway), it lets you build huge drones and then drop your instrument back into the mix with one click!.

The WET Only Footswitch serves as a remote foot-controller that bypasses the SPLIT & MIX toggle switch on the PLUS Pedal's side panel, thus letting you switch in and out of the WET Only mode on the fly.

This flexibility allows you to build up a rich layer of ambient sound effects and then quickly unmute your instrument and return to playing on top.

(Note: Switch for OUT 1 must be set to MIX in order to use footswitch.) When using the WET Only footswitch (plugged into "CLEAN OUT/FSW"), you can still access the DRY only signal through a special DRY OUT output built into the Footswitch itself.

Input: 1/4" TRS (Stereo) in from PLUS Pedal, TRS Cable is included
Output: 1/4" Mono Dry Out
Product Dimensions: WLH 58 x 66 x 46 mm (2.3 x 2.6 x 1.8 in)
Product Weight: 230 g (0.5 lbs)

Read more
MRP:$52.97 SAVE 19%
coming soon $43.00
FORTHCOMING
Acid Rain Technology Navigator Voltage Utility Module
Cat: 804572 Rel: 25 Jan 21
 
Voltage utility module
Notes: Navigator is a compact, multi-use voltage utility designed to bring playable control to CV sources in your rack. The combination of normalled voltages and mixing allows you to attenuate, polarize and offset signals to modulate parameters exactly within the sweet spot of another module's CV input. Navigator is a compact, multi-use voltage utility designed to bring playable control to CV sources in your rack. The combination of normalled voltages and mixing allows you to attenuate, polarize and offset signals to modulate parameters exactly within the sweet spot of another module's CV input.

Details:

4hp

25mm deep

11 mA on +12V, 8 mA on -12V, 0 mA on +5V
Read more
MRP:$105.94 SAVE 17%
coming soon $88.27
FORTHCOMING
Acid Rain Technology Switchblade 3 Channel Switch & Mixer Module
Acid Rain Technology Switchblade 3 Channel Switch & Mixer Module (CV modulation/mixer/switch/utility synth module)
Cat: 804573 Rel: 25 Jan 21
 
3-channel switch & mixer module
Notes: Switchblade is a compact 3 channel switch and mixer. Each channel can be set to switch between or combine two channels of CV or audio with either latching or momentary operation. Each channel can be controlled with a trigger (latching) or gate (momentary) or their respective button during live performance. We designed this module to be a great companion for the trigger, gate, CV and audio sources in your rack.

Details:

4hp

30mm deep

50 mA on +12V, 10 mA on -12V, 0 mA on +5V
Read more
MRP:$141.25 SAVE 22%
coming soon $109.78
FORTHCOMING
Acid Rain Technology Chainsaw Digital Oscillator Module
Cat: 804567 Rel: 25 Jan 21
 
Digital/dual & stereo/oscillator module
Notes: Chainsaw is a powerful digital oscillator designed to bring polyphony to your rack in a compact and playable interface. We were inspired by the super-saw; a mainstay of electronic music production, and a waveform rich with harmonics for filters and effects to chew on. Chainsaw features 3 voices of 7 waves, with individual pitch control per voice. All waves morph from super saw to super square for giant hollow basslines and more.

Details:

4hp

35mm deep

110 mA on +12V, 10 mA on -12V, 0 mA on +5V
Read more
MRP:$320.54 SAVE 17%
coming soon $267.10
FORTHCOMING
Sound Force VCF & VCA 6 Voltage Controlled Filter & Amplifier Module
Cat: 804304 Rel: 25 Jan 21
 
VCF/VCA module
Notes: The SoundForce VCF/VCF 6 is a Eurorack interpretation of the Juno 60/106 VCF, VCA and HPF sections. It was built based on the original service manuals documentation using modern components.

Signal flow:

The SoundForce VCF / VCA 6 features a simple 2-input audio mixer, a voltage controlled low pass filter (VCF), a VCA and a high-pass filter with 3 fixed cutoff frequencies plus a bass boost position. The signal flow is: mixer -> VCF -> VCA -> HPF.

VCF:

The VCF section is a voltage-controlled low pass filter with a selection between 4 poles (24db/octave) or 2 poles (12db/octave). The travel of the FREQ slider has been calibrated to give you the best experience in the original 4 poles mode. FM1 and FM2 CV inputs can be used to modulate the cutoff frequency of the filter. Those CV signals are added to manual position of the FREQ slider. Note that you can invert the polarity of FM1 using a toggle switch. The VOCT input can be used to close the filter more or less based on the pitch of the note played by your musical CV source. It can also be used to "play" the filter when it is self-resonating. The filter will be in tune across about 8 octaves. Self-resonance is occurring when the RES slider is around position 9 or higher. The resonance can be also voltage-controlled using the Q CV input, this signal is added to the manual position of the RES slider. Please note all CV inputs have attenuators expect the VOCT input.

LDC:

LDC stands for "loudness drop compensation", it is engaged when the switch is in the upper position. This feature avoid the usual input signal loudness drop with high level of resonance. Please note you will need to lower the input signal and/or VCA level to avoid distortion as LDC requires some extra headroom.

VCA:

This section is a "vintage-style" single OTA VCA. There is a manual slider control as well a CV input for the VCA. Both are summed together.

HPF:

The high-pass filter section is a combination of both the Juno 60 and 106 HPFs. Position 0 will give you the bass boost from the 106. Position 1 will not filter at all. From position 2 to 4 will cut progressively more bass and the cut off frequencies are 225 Hz, 339Hz and 720Hz.

Specifications:

18HP
Depth: 38mm (including power connector)
Power: +12V 91mA, -12V 51mA
V/OCT, FM1, FM2: input range -5 to 5V
QCV, ACV: input range 0V to 10V
Read more
MRP:$319.18 SAVE 17%
coming soon $265.98
FORTHCOMING
Sound Force Dual Filter Module
Sound Force Dual Filter Module (filter synth module)
Cat: 804296 Rel: 25 Jan 21
 
Dual filter module
Notes: The SoundForce Dual Filter is a 2-stage cascaded OTA design based on the late MS-20. The design has been fine-tuned with extended resonance control as well as a resonance CV input. Each filter can be either a 12dB/oct low-pass or 6dB/oct high-pass. To keep the module HPs on the low side, the filter mode setting is located on the back of the module. The module was designed to be a very affordable full-featured modern filter.

With only 2 poles, it uses a total of 3 OTA ICs and 4 OP-AMP ICs for both filters even with the added resonance voltage control. Early on, efficiency and part counts were a focus during testing and development. In combination with automated manufacturing and a very short supply chain, the module has a very high quality standard at a very affordable price. The module uses only A-brand ICs and passive and no costs were cut during purchasing.

The SoundForce Dual Filter features 2 identical filter sections, one on the left and one on the right. Each filter has 2 audio inputs (one of which has a level control pot IN1), a manual cut off frequency pot and a manual resonance pot. There are 2 CV inputs for the cut off frequency both with their attenuverters and 1 CV input for the resonance with an attenuator.

At the back of the module you can find trimmers to fine-tune the amount of resonance. By default, the trimmers are set so the filter starts to self-resonate when the resonance knob is at 4 o'clock. Turning the trimmer clockwise will create a more exaggerate resonance and it will start to self resonates earlier. On the other hand turning the trimmer counterclockwise will tame the resonance range. The factory value is marked on the pcb with a sharpie so feel free to experiment and go back to the default if necessary.

Filter modes settings:
Each filter has 3 jumpers that sets the mode: lowpass or highpass. You will find those on the back of the PCB with clear labels for the positions of both modes. The jumpers are color coded, one filter is black, the other is white.

Specifications:
- 12HP
- Depth: 38mm (including power connector)
- Power: +12V 40mA, -12V 40mA
- Cutoff CV inputs range -10V to 10V
- Resonance CV input range 0V to 10V
Read more
MRP:$176.57 SAVE 18%
coming soon $144.87
FORTHCOMING
Tenderfoot Electronics SVF-1 State Variable Filter Module
Cat: 805888 Rel: 01 Feb 21
 
State variable filter module
Notes: The new SVF-1 from Tenderfoot Electronics is a great sounding state variable filter with voltage controlled cutoff and resonance. The SVF-1 self-oscillates when the resonance is turned up and has a 1V/octave input for use as a sine wave VCO.

The resonance circuit includes a Q control, a drive control, and a button to press if you're feeling less polite and really want to push the resonance beyond its limit and get it sounding dirty! The Q control is also controllable via a CV input jack.

All outputs are available simultaneously:
Low Pass
Band Pass
High Pass
Notch

A tonne of versatility from a filter in 8HP.

53 mA +12V
53 mA -12V
0 mA 5V
21 mm deep
Read more
MRP:$215.95 SAVE 21%
coming soon $169.76
FORTHCOMING
LA67 WFM Oscillator Module
Cat: 806152 Rel: 01 Feb 21
 
Oscillator module
Notes: An analog VCO with a unique wave shaping circuit. Based on the 1970s Kobol synthesizers, the WFM output provides a continuously variable wave shape from triangle to saw to modulated pulse, with many interesting points in between. Voltage control over wave shape and output amplitude allow for wide timbral variations.

Technical Specifications

8hp
35mm depth
Current draw: 65mA/65mA +12v/-12v

Reverse power polarity protection


Read more
coming soon $320.30
FORTHCOMING
Tenderfoot Electronics Hike 2 Channel LFO/EG/Random CV Source Module
Cat: 805885 Rel: 01 Feb 21
 
2-channel envelope generator module
Notes: Hike

Hike is the new 2 - channel envelope generator from Tenderfoot Electronics.

Each channel has 3 main modes:
Red = Looping envelope 0V to 8V
Green = One-shot triggered A/D envelope
Yellow = ASR envelope for use with longer gate signals.

Each channel has separate mode buttons, rise and fall knobs, as well as additional CV control over the rise and fall.

Each channel has an attenuator to dial back the 0V to 8V output.

Holding the mode button puts the channel into random voltage mode and acts similarly to a sample and hold circuit.

The 'rise' knob alters the rate at which the sample triggers occur.

the 'fall' knob adjusts the level of randomness from one sample to the next.
Read more
MRP:$215.95 SAVE 13%
coming soon $187.88
FORTHCOMING
Tenderfoot Electronics Ease 3 Channel Mixing Attenuverter Module
Cat: 805886 Rel: 01 Feb 21
 
3-channel attenuverter/CV & audio mixer module
Notes: Ease is a 4HP, 3-channel attenuverter that can also be used as a CV or audio mixer.

If their outputs are not in use, channel 1 and 2 mix into the output of channel 3.

With the inputs unpatched, each channel can be used as a +/- 5V DC source.
Read more
MRP:$120.88 SAVE 21%
coming soon $95.06
FORTHCOMING
Tenderfoot Electronics Quad Quantizer Module
Cat: 805847 Rel: 01 Feb 21
 
4-channel CV quantizer module
Notes: A four-channel CV quantizer

The new Quad Quantizer from tenderfoot electronics is a versatile 4-channel CV quantizer.

This module has custom note selection, 12 pre-programmed scales and key transpositions that can be manually selected, or CV selected via the associated CV inputs.

Each channel features:
CV input - which accepts the input you wish to quantize
trigger input - which samples and holds the current voltage at the CV input (left unpatched, the quantizer continually processes the CV input)
CV output - where your freshly tuned and reordered CV will emerge to go on to your VCO or otherwise in your modular system.
trigger output - where a trigger signal is outputted every time a new CV value is produced at the CV output.

The encoder allows you to select various notes within the scale, with the left-hand button adding or deleting the selected note.

The right-hand button has multiple functions:

long press (2 seconds) - deletes all of the currently selected notes to leave you with a blank canvas.
middle press (1/2 second) - quick-saves the current selected notes into memory.
momentary press - this switches between the current panel settings and the settings saved in the quick menu.

Width: 12HP

Depth: 32mm

Current draw:

101 mA +12V
10 mA -12V
0 mA 5V
Read more
MRP:$311.03 SAVE 18%
coming soon $254.65
FORTHCOMING
Tenderfoot Electronics Ringr Dual Passive Ring Modulator Module
Cat: 805877 Rel: 01 Feb 21
 
Dual passive ring modulator module
Notes: Ringr - a Father Moo inspired passive ring modulator.

Inspired by Father Moo and designed by Tenderfoot Electronics,

ringr is a 2-channel, transformer-based, passive ring modulator.

Leaving the carrier unpatched, the input is routed through the diodes acting as a wave rectifier.

With both the input and carrier patched, ringr gives you 2 channels of that classic ring modulator sound in 4HP!
Read more
MRP:$134.46 SAVE 26%
coming soon $99.60
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$116.81 SAVE 17%
coming soon $97.33
FORTHCOMING
Tenderfoot Electronics Lattice 12 Step Sequencer Module
Cat: 805814 Rel: 01 Feb 21
 
12-step sequencer module
Notes: Lattice is a 12-step sequencer laid out in 4 rows of 3 steps. These steps can be navigated horizontally, vertically, or sequentially through all 12 steps. Sending different clock inputs from related or unrelated signals can open up a whole world of evolving, polyrhythmic goodness.
Read more
MRP:$297.45 SAVE 24%
coming soon $226.36
FORTHCOMING
Tenderfoot Electronics Cells Expander Module (for Lattice)
Cat: 805816 Rel: 01 Feb 21
 
Expander module
Notes: Cells adds a number of additional features to Lattice:

A 3x4 grid of keys to select steps manually and play the sequencer more like an instrument.

Forward / Reverse mode controlled by a CV trigger and physical button.

Random step selection by CV trigger.

CV selection of the current step - great for inputting a positive envelope or LFO to cycle through the steps on the Lattice.

Gate output - Whenever a new step is navigated to, a pulse will be output by Cells in order to trigger a voice's envelope. Pressing on the keypad will also output a constant gate signal.
Read more
MRP:$297.45 SAVE 24%
coming soon $226.36
FORTHCOMING
Sound Force SFC-1 Rev B USB MIDI Controller
Cat: 804288 Rel: 25 Jan 21
 
USB MIDI controller
Notes: The SoundForce SFC-1 is a class-compliant USB MIDI controller dedicated to u-he's Repro-1. The unit was updated to Rev B end of 2020 with metal shaft pots (no wobble) and walnut wood sides to compliment to rest of the product line.

Features:
With a whopping total of 51 pots, 41 slide switches and 6 tactile switches, you can control every single MIDI-mappable control of the plugin in analog fashion. The awesome effect chain is also fully-covered on the bottom section of the controller. Every control is assigned to a default CC number, but that can be changed using our control panel app in Google Chrome. A shift button unlocks an alternative channel for each pot, allowing you to control potentially 51 extra parameters. Even more user-specific controls are possible with the extra set of user-assignable switches and pots.

Build quality:
The enclosure is made of 100% sheet metal. The case is made of bent steel and powder coated in black. The front panel is aluminium, also powder coated and screen printed with scratch-proof white ink. Please note that the final product will have a plain black powder coat, not structured like the pictures are showing. Discrete and minimalistic wooden pieces of 6 mm thickness are added to the sides. The SFC-1 is a boutique controller manufactured in small batches in the Netherlands. A lot of operations are still performed by hand and automation is used when possible to improve quality and processes.

Dimensions:
Length x Width x Height : 380mm x 173mm x 55mm

System supported:
Mac/Windows (other OS not tested)
Class compliant USB MIDI device
DAWs : Tested and working in Pro Tools 10/11/12, Logic 9/X, Cubase 7/8/9, Abelton 9/10, Reaper, Bitwig

Connections:
USB 2.0 Type-B plug

Power :
USB-bus powered
Read more
MRP:$421.04 SAVE 23%
coming soon $325.95
FORTHCOMING
Transient Modules 1F Voltage Controlled Switch Module
Cat: 804240 Rel: 25 Jan 21
 
Voltage controlled switch module
Notes: The 1F is a voltage controlled switch, intended to be 'one friend' for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v/oct signals. More detailed info on the demo video.

Technical specifications:

4HP.

27 mm depth.

Consumption: 15mA +12V; 10mA -12V
Read more
MRP:$107.30 SAVE 17%
coming soon $89.41
FORTHCOMING
Beats Studio3 Bluetooth Wireless Noise Cancelling Over-Ear Headphones (blue)
Cat: 794254
 
Bluetooth wireless noise-cancelling headphones
Notes: Beats Studio3 Wireless headphones deliver a premium listening experience with Pure Active Noise Cancelling (Pure ANC). Beats' Pure ANC actively blocks external noise and uses real-time audio calibration to preserve clarity, range and emotion. They continuously pinpoint external sounds to block while automatically responding to individual fit in real time, optimising sound output to preserve a premium listening experience the way artists intended.

Incorporating the efficient Apple W1 chip brings seamless setup and switching for your Apple devices, up to 22 hours of battery life for all-day fully-featured playback with Pure ANC on, and Fast Fuel technology for 3 hours of play with a 10-minute charge. Pure ANC-off for low-power mode provides up to 40 hours of battery life.

Take calls, skip songs, control volume and activate Siri using the convenient multi-function on-ear controls. The Apple W1 chip features Class 1 Bluetooth connectivity - the industry-leading classification for range and signal strength. With best-in-class performance, Beats Studio3 Wireless seamlessly syncs to your devices, so you can easily move about, keep the music going and stay productive all day.

The Beats Studio3 Wireless headphone is designed for long-term comfort to match its impressive battery life of up to 22 hours for all-day play. The soft over-ear cushions feature advanced venting and signature ergonomic pivoting for a custom, flexible fit for any head shape. The holistic design is lightweight, durable and comfortable, so you can get lost in your music.

Read more
coming soon $478.75
FORTHCOMING
Sensel Piano Overlay For Morph MIDI Controller
Cat: 785459
 
MIDI controller overlay
Notes: Make music on the go or in the studio with the Piano Overlay. It features 24 keys, octave-shift, transport controls, velocity sensitivity, and more. Combine up to four devices to create a full size piano! Pitch bend on every finger for unique control over your synths and sounds.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Piano Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compitable with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Buchla Thunder Overlay For Morph MIDI Controller
Cat: 785456
 
MIDI controller overlay
Notes: The legendary expressive controller, the Buchla Thunder, now comes to the Sensel Morph in an exclusive new partnership with Buchla U.S.A.

The Buchla Thunder Overlay exclusively features a new preset system to the Morph. By holding the preset button and tapping on one of the nine numerical keys, you can easily and instantly switch between nine mappings without needing to open the SenselApp. Need to go from an instrument controller to a virtual mixer? Want to swap between scales? Presets add a seamless extension of expressive control possibility to the Buchla Thunder Overlay.

The Buchla Thunder is uniquely well-suited to a variety of instruments - from synthesizers with rich and evolving timbres, to acoustic samples that benefit from a more human touch, to hardware synthesizers like the legendary Buchla Easel. You can witness the richness of expression in the videos above.

The MIDI protocol is USB Class-compliant and supports MIDI Polyphonic Expression (MPE) and Bluetooth MIDI.

Read more
MRP:$86.92 SAVE 24%
coming soon $65.64
FORTHCOMING
Sensel Music Production Overlay For Morph MIDI Controller
Cat: 785462
 
MIDI controller overlay
Notes: Tune up your electronic music chops with Sensel's customizable MIDI control surface. The 16 pads, bass synth keyboard, and slew of knobs and sliders equip you with all you need for your next hit. Pitch bend and after-pressure make this an essential tool for beats and sound design.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Music Production Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compatible with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Azerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785471
 
MIDI controller overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Features:
Soft and quiet, with mechanical feedback - feels fantastic to type on
Wireless Bluetooth connectivity with PC, Mac, iOS (iPhones, iPads) and Android
Hotkeys for PC/Mac
Trackpad below space bar

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with QWERTY, Morph with AZERTY, or Morph with DVORAK.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Drum Pad Overlay For Morph MIDI Controller
Cat: 785465
 
MIDI controller overlay
Notes: Everything you need in a portable package. The Drum Pad Overlay is designed for an authentic drumming experience. Fingers, hands, sticks, and mallets are fair game for making beats. When you drop the Drum Pad Overlay on the Morph, it kicks into fast-scan mode to capture everything no matter how fast you're drumming! Includes 7 large pads with 13 programmable zones.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Drum Pad Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also comptable with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Innovator's Overlay For Morph MIDI Controller
Cat: 785466
 
MIDI controller overlay
Notes: Quickly and easily design fully custom layouts with drag-and-drop tools in the Sensel App, export and print on paper, and then secure paper under the transparent Innovator's Overlay.

Quickly iterate with the Innovator's Overlay before you 3D-print your custom design to make sure its just right.

With Sensel's open-source API, the Innovator's Overlay provides an ideal medium for your creations.

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Innovator's Overlay.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Video Editing Overlay For Morph MIDI Controller
Cat: 785467
 
MIDI controller overlay
Notes: Put simply, the Video Editing Overlay (VEO) is a specialized keyboard for video editing, designed to simplify your workflow.
But it's also so much more. Navigate with ease using the jog wheel and force-sensitive shuttle controls. Speed up your workflow by reducing complex multi-finger shortcuts to a single tap. Use Sensel's default mapping or create your own custom mappings.
Go here for reviews about the VEO, and visit our blog post for more details.
*The VEO is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Video Editing Overlay.

Software Compatibility
By default, the key commands on the VEO are mapped for with Adobe Premiere Pro. However, it can also be easily remapped in the SenselApp to adapt to any editing suite, such as Final Cut Pro, Luma Fusion, or DaVinci Resolve.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Beats Studio3 Bluetooth Wireless Over-Ear Headphones (Skyline Collection) (midnight black)
Cat: 794266
 
Bluetooth wireless over-ear headphones
Notes: Beats Studio3 Wireless headphones deliver a premium listening experience with Pure Active Noise Cancelling (Pure ANC). Beats' Pure ANC actively blocks external noise and uses real-time audio calibration to preserve clarity, range and emotion. They continuously pinpoint external sounds to block while automatically responding to individual fit in real time, optimising sound output to preserve a premium listening experience the way artists intended.

Incorporating the efficient Apple W1 chip brings seamless setup and switching for your Apple devices, up to 22 hours of battery life for all-day fully-featured playback with Pure ANC on, and Fast Fuel technology for 3 hours of play with a 10-minute charge. Pure ANC-off for low-power mode provides up to 40 hours of battery life.

Make calls, skip songs, control volume and activate Siri using the convenient multi-function on-ear controls. The Apple W1 chip features Class 1 Bluetooth connectivity - the industry-leading classification for range and signal strength. With best-in-class performance, Beats Studio3 Wireless seamlessly syncs to your devices, so you can easily move about, keep the music going and stay productive all day.

The Beats Studio3 Wireless headphone is designed for long-term comfort to match its impressive battery life of up to 22 hours for all-day play. The soft over-ear cushions feature advanced venting and signature ergonomic pivoting for a custom, flexible fit for any head shape. The holistic design is lightweight, durable and comfortable, so you can get lost in your music.

Read more
coming soon $478.75
FORTHCOMING
Sensel Morph USB & Bluetooth MIDI Controller (standalone)
Cat: 785452
 
USB & Bluetooth MIDI controller
Notes: Swap overlays to change from music, writing, gaming, and more. USB or Bluetooth means the Morph works anywhere. Experience a new level of expression with 20,000 pressure sensors at your fingertips. Whatever your passion, you can make it with Morph.

Comes with:
Sensel Morph
One overlay of your choice: Piano, Music Production, Drum Pad, Buchla Thunder (+$20=$269), Innovator's, Video Editing, Keyboard, Gaming
License to Arturia's Analog Lab Lite synthesizer software
License to Bitwig's Studio 8-Track music-creation software (when purchased with a MIDI overlay*)
USB Cable

The Sensel Morph uses Sensel's patented PressureGrid technology: a high-resolution, multi-touch, pressure sensing touch technology with a sensitivity range of 5g to 5kg and a tracking accuracy of ~0.1mm.

Compatibility: Windows, OS X, iOS, Android, Linux, Arduino (see final product image for more details on compatibility)
Dimensions: 240 mm x 169.5 mm
Active Area: 230 mm x 130 mm
Thickness: 6.75 mm
Weight: 0.4 kg
Latency: 2 ms - 8 ms (mode dependent)
Resolution: 6,502 DPI
Connectivity: USB, Bluetooth LE, and Serial
Power: USB, Rechargeable Battery
MIDI: USB Class-compliant, MIDI Polyphonic Expression (MPE), Bluetooth MIDI
Read more
MRP:$365.36 SAVE 33%
coming soon $243.34
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (light gray)
Cat: 785478
 
MIDI controller case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.60 SAVE 17%
coming soon $27.15
FORTHCOMING
Sensel Gaming Overlay For Morph MIDI Controller
Cat: 785468
 
MIDI controller overlay
Notes: Remember all the times when you'd press harder on the game controller buttons hoping it would make you go faster? We do. In fact, those moments were at the top of our minds when we were creating the Gaming Overlay. Now, you can use pressure, gestures, and the simple layout of the device to beat your opponent and add that extra missing dynamic to your gaming.
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Gaming Overlay.

Compatibility
The Gaming Overlay acts as a USB game controller, so it is compatible with anything a standard gamepad is. While most devices support this standard, not every game does, so you may need to use emulation software for some games. You can find more details in the Morph user guide.
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Qwerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785469
 
MIDI controller overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm
Read more
MRP:$46.18 SAVE 17%
coming soon $38.48
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (blue)
Cat: 785475
 
MIDI controller case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.60 SAVE 17%
coming soon $27.15
FORTHCOMING
Sensel Travel Case For Morph MIDI controller (pink)
Cat: 785476
 
MIDI controller case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.60 SAVE 17%
coming soon $27.15
FORTHCOMING
AniModule DD Dual VCA Module
AniModule DD Dual VCA Module (CV modulation / panning / VCA / dual stereo synth module)
Cat: 794391
 
Dual VCA module
Notes: A Dual VCA for Audio or CV.

Mod In 1 is Buffered, Inverted then Normalled to Mod In 2, to facilitate stereo panning and VC CrossFading without a bunch of support modules.

Don't want it? Just turn the attenuator down or plug a signal of your choosing in to the Mod In 2.

Current Draw: +12V = 25mA, -12V = -22mA

8HP, 28mm Deep
Read more
MRP:$209.16 SAVE 17%
coming soon $174.30
FORTHCOMING
AniModule Lil' Monster VCO Module
AniModule Lil' Monster VCO Module (oscillator synth module)
Cat: 794393
 
VCO module
Notes: At 8HP and 28mm deep this is A Frightening little Oscillator with Monstrous PWM, Sick, Sick Sync, and Terrifying FM capabilities!!

Great 1V/Oct tracking

Range from below to above the audible

All Waveforms respond to your Sync Input signal

Current Draw: +12V = 21mA, -12V = -21mA 8HP, 29mm Deep
Read more
MRP:$253.98 SAVE 17%
coming soon $211.65
FORTHCOMING
AniModule MixMan Module
AniModule MixMan Module (attenuater / mixer/ multiple / polariser / utility synth module)
Cat: 794394
 
Mixer multiple & CV manipulator module
Notes: This quintessential module, while seeming fairly utilitarian, is practically Indispensable.

At only 8HP wide and 30mm deep
You can Mix, Mult, Invert and Offset your Audio and CV.

For starters there is a 3 Channel Mixer with x3 Buffered Outs.
Then there is a dedicated Analog Inverter.
Last but not least there is an Offset Manipulator.

The Offset Manipulator is designed to take a signal and combine it with an offset.
It will work fine without a signal coming in to it though. Just take the signal from the Offset Manipulator out and dial in your desired voltage.

The Offset Manipulator Out is Normalled to the 3rd Mix In Jack Switch. If you don't want your Mixer Signals Offset, Connect a plug to the 3rd Mix In Jack First, or just dial down the 3rd attenuator to 0.

The Mixer Out is Normalled to the Inverter In Jack Switch. That way you can have an inverted version of your MixOut at the Inverter Out without using an extra patch cable
Read more
MRP:$134.46 SAVE 17%
coming soon $112.04
FORTHCOMING
AniModule Quad Comparator Module
AniModule Quad Comparator Module (CV modulation / logic / comparater / utility / quad synth module)
Cat: 794399
 
Quad comparator module
Notes: Simple quad comparator based around the LM339.

It will take your Voltages and turn them into Logic On.

When your signal is higher than the threshold the Gate goes high and the NOT Gate goes low.
When your signal is lower than the threshold the NOT gate goes high and the Gate goes low.

You can set the threshold anywhere from about -10V to +10V.

Input 1 is buffered then normalled to JackSwitches 2->4. So you could send an LFO in to Input 1, set different thresholds for all the inputs and have all the gates/NOT Gates fire at different points from the same LFO.

115 mA +12V
95 mA -12V
29 mm deep
O 5.00 (1 Votes) Average Rating
Read more
MRP:$194.22 SAVE 17%
coming soon $161.84
FORTHCOMING
AniModule LogicOgic Module
AniModule LogicOgic Module (clock modulater / frequency divider / logic synth module)
Cat: 794401
 
Logic module
Notes: This is a handy module. It's nice to have a few ORs and ANDs around when you're fiddling around with your clocks and percussives.

The Output from FlipFlop1 Q is normalled to the FlipFlop2 Input via the jack switch.

The NOT Q outs from the FlipFlops are fun to stagger your clock pulses or use as a Sub-Oscillator. The Inverter/Buffer can be sent to a Gate-Trigger converter and back to the OR to double your clock.

2 - FlipFlops (Q and NOT Q outs for each)

2 - OR Gates

2 - AND Gates

1 - Buffer/Inverter

All the outs are Buffered.

55 mA +12V
38 mm deep
O 4.00 (2 Votes) Average Rating
Read more
MRP:$267.57 SAVE 17%
coming soon $222.96
FORTHCOMING
Dreadbox Erebus V3 Duophonic Synthesiser
Cat: 809370 Rel: 30 Apr 21
 
Analogue duophonic desktop synthesiser
Notes: Explore your creativity and create unique sounds. The Dreadbox EREBUS V3 Duophonic Analog Synthesizer is a comprehensive desktop synth, featuring numerous upgrades and enhancements from version 2.

The EREBUS V3 Analog Synthesizer builds on the design of version 2, adding a third oscillator for improved sound design capabilities. The ergonomic layout also includes a built-in 12dB resonating multimode filter and dedicated ADSR envelope. One of the most unique features is the auto-tuning function which keeps your oscillators tuned to perfection.

You can generate a wide variety of sounds using the EREBUS V3, from atmospheric pads and textured sounds to brash basslines and cutting-edge leads. It also includes 36 patch points, so you can use the synth with a variety of external modules and synths.

15V DC center pin 2.5mm positive (included)
35 x 18 x 5.5 cm
2.38 kg
Read more
MRP:$732.07 SAVE 17%
coming soon $610.06
FORTHCOMING
Dreadbox Typhon Monophonic Analogue Synthesiser
Cat: 809378 Rel: 30 Apr 21
 
Monophonic analogue synthesiser
Notes: Typhon has been developed with ultimate care and love, so as to be a great-sounding, portable and affordable synthesizer. It has a complex modulation routing, 256 preset memory, a 32 note sequencer, and powerful stereo effects developed by Sinevibes.

Since it is packed in a compact USB powered box, it can be carried everywhere you go!

Specifications & Connections:

USB powered (at least 500mA)
60 Playing hours with 20,000mA portable power bank
MIDI Din IN and OUT
1/4 in Stereo Out
1/8 in Headphone Out
1/8 in Mono Audio In (for routing via Typhon FX)

Dimensions: 23 x 13 x 6 cm
Weight: 1kg
Read more
MRP:$441.42 SAVE 17%
coming soon $367.84
FORTHCOMING
Dreadbox Hypnosis FX Time Effects Processor
Cat: 809380 Rel: 30 Apr 21
 
Chorus-flanger/delay/spring reverb effects unit
Notes: Reverb, Delay, Chorus. Three powerful effects, now with a retro twist. The Dreadbox Hypnosis Time Effects Processor is an old school inspired stereo processor. Hypnosis combines an analogue reverb, a chorus-flanger, and a digital delay. Three effects in a great looking chassis. Small enough to fit on your desktop.

Thanks to Dreadbox's effects making pedigree you can be sure to get the most interesting and deep effects out there. Hypnosis can take a simple bass sound or an arpeggiated lead and turn it into something much more evocative. Embrace the old school with this excellent effects unit.

Read more
MRP:$582.67 SAVE 17%
coming soon $485.56
FORTHCOMING
AniModule SOB v1 Module
AniModule SOB v1 Module (state variable filter & waveshaper synth module)
Cat: 794397
 
State variable filter module
Notes:  A State Variable Filter with an adjustable WaveFolder on the input.

Self-Oscillating Filter Tracks 1V/Oct

Vactrol Input allows you to control CutOff via gates/triggers without using up an EG

Pot to mix "Clean" and "Folded" signal levels

Filter and/or Fold Audio Or Control Voltages

2 Input Signal mixer

1 Input Control Voltage Mixer

1 Input to Vactrol for CV Modulation

1V/Oct In

current Draw: +12V = 31mA -12V = 34mA
Read more
MRP:$239.04 SAVE 17%
coming soon $199.19
FORTHCOMING
Dreadbox Antidote Karplus-Strong Strings Module
Cat: 809386 Rel: 30 Apr 21
 
Filter/low pass gate/synth voice eurorack module
Notes: Larger than life sounds in a compact form. The Dreadbox Antidote Karplus Strong-Strings is a must-have module for your set-up. Coming complete with a 512 stages BBD chip, the Karplus loops a waveform segment through a delay to emulate the sound of strings being plucked or hammered. Thanks to its streamlined 10HP design, the module can be easily integrated into any set-up with minimal adjustments required.

At the heart of the module lies a noise generator with an adjustable decay known as "pluck". Signal passes through two analog lowpass filters at the input and output stages, the output filter also works in conjunction with the lowpass gate. Antidote is designed to provide precise tracking possibilities over five octaves (C0 up to B4), it can also process signals from external sources.
Read more
MRP:$120.88 SAVE 17%
coming soon $100.74
Items 1 to 50 of 277 on page 1 of 6
1  2  3  4  5  6  »

Filter

Coming Soon: Studio Equipment
Close