100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Home  Coming Soon  

Studio Equipment

Options
Items 201 to 250 of 257 on page 5 of 6
«  1  2  3  4  5  6  »
FORTHCOMING
Solid Gold FX Counter Current Reverb & Feedbacker Effects Pedal
Cat: 792808
 
Reverb + feedback pedal
Notes: You've dipped your toes in the water with the Surf Rider, now it's time to get swept away in the Counter Current- the do-it-all immersive lo-fi reverb unit that gives you just the type of degraded reverb madness that you need to create crumbling walls of verb, 8-track garage rock ambience, and swells of bit-starved echo.

The heart of the Counter Current is three interconnected and highly interactive controls and one footswitch: F.Back (Feedback), Decay, Drive and the Momentary Feedback switch. By using these controls together and with generosity, all kinds of reverb sounds open right up.

Let's start with the Decay control: This knob affects the end result of all your careful knob placement, by extending the, well, decay time of the virtual reverb tank. Dialing it in nice and high keeps the trails ringing out longer and really lets you flood the front end of your amp with the heart of the Counter Current.

In keeping with lo-fi reverb tradition, the Drive control overloads the virtual reverb tank transducers, saturating the front end with a touch of extra gain that excites your tone in the best way. Dialing this control back gives you a characterfully clean reverb sound that still sounds an absolute treat, but go ahead- tweak that thang.

The Counter Current's Feedback control recycles the post-'verb signal into the front end for a chaotically rich reverb tone, increasing the resonance and augmenting the Drive control. Turning the control fully counterclockwise shuts the back door and keeps the feedback out of the input, retaining sparkle and clarity.

Of course, the Tone knob does wet-signal tone knob things, lightening or darkening the reverb signal, and the Level control adds wet signal to the mix. After you set those, it's time to examine the Momentary Feedback switch. Buckle up.

The Counter Current's secret weapon, the Momentary Feedback switch ramps up the feedback for some oscillating blasts of reverb just when you want them. Not only is it a killer tone, but it's a rock 'n' roll set ender. This switch's function, as you might expect, is extremely dependent on where the "core three" knobs are set, giving you everything from crunchy spring drip to bottomless wells of soft scuzzy ambience and everything in between. Step inside the Counter Current. It'll treat you well.

KNOBS:

Tone: This knob adjusts the frequencies of the reverb signal only, giving you 'verb tones from dark and intimate to bright and present.

F. Back: This adjusts the intensity of the momentary feedback footswitch function and works in conjunction with the drive and tone controls. Increasing this control will create a faster and more intense feedback.

Decay: Increases the size of the reverb space and the intensity of the signal.

Drive: This control lets you saturate the virtual transducers on the reverb unit, giving you additional grit, grime and drive before the 'verb kicks in.

Level: Controls the volume of the reverb (wet) signal.

AUXILIARY:

Input: Instrument or other pedal goes here.

Output: Amplifier or other pedal goes here.

Expression jack: Connecting an expression pedal here gives you hands-free control over the Drive.

True bypass footswitch: Turns the effect on and off.

Momentary feedback footswitch: Hitting this switch will cause the reverb to feed back into itself creating sounds ranging from a mild oscillation to a screeching howl depending on where the f.back and drive controls are set.

POWER:

The Counter Current requires a center-negative 9VDC power adapter with at least 53mA of current (not included). Almost all power supplies meet this requirement, but check yours beforehand.

DIMENSIONS:

4.67" x 3.68" x 1.18" (119mm x 94mm x 30mm)
Read more
MRP:$257.51 SAVE 17%
coming soon $214.59
FORTHCOMING
Solid Gold FX Communication Breakdown Dual Fuzz Effects Pedal
Notes: Sporting two different modernized takes on the legendary Tone Bender circuit in one box, Communication Breakdown is an unabashed sonic love letter to the glorious fuzz tones of yesteryear.

This pedal is ready to reveal the stairway to tone heaven through its wide gain range, intuitive tone controls and the ability to use the two channels individually or together. From clear and refined low-gain grime, crushing walls of sound to beautifully compressed and singing leadtones, Communication Breakdown is sure to bring all of the good times and none of the bad.

Adding not one, but two amazing fuzz pedals to your collection, all in one compact box of gainy goodness. Fuzz A is born out of the fire and flames of the rare Tone Bender MK1.5, but brings it into the modern era by using hotter silicon transistors than the original. This results in a wide range of extremely powerful yet refined fuzz tones.

Fuzz B, on the other hand, takes a page (see what we did there) from the book of the classic Tonebender MKII, and preserves everything good and great about that snarling, saturated and compressed box of fuzzy wonder. But as an extra bonus, we added our JFET pre-amp to the equation in order to breathe more stability and tonal clarity into this legendary circuit.

But the really cool part is of course that you can use the two channels either individually or together, seeing you jump from a hairy rhythm tone to a soaring lead in seconds, or lets you sculpt unique dirt tone never heard before.

Each channel sports the same super intuitive controls, so you won't be left dazed and confused exploring its vast fuzzy playground. Besides the ubiquitous Fuzz and Volume controls, each side has a Bias knob, whichlets you vary the voltage sent to the circuits. Clock-wise will give you beefy and bold dirt tones, whereas counter-clockwise sees it unleash a more lean, choppy and gated fuzz tone.

On top of that you can further sculpt the overall tone of each side viathe simple three-way Color toggles, for everything from bright and biting full-range tones to smooth and dark, while the Input toggles let you adjust the input attenuation of the pedal, making sure that it plays well withany wahyou want to put in front of it.

So whether you're a classic fuzz connoisseur looking to nail history defining dirt tones or simply searching for a versatile fuzz pedal to jump-start your creativity, then the Communication Breakdown is sure to deliver.

KNOBS, SWITCHES, ETC.

Fuzz Knobs: Want less fuzz? Turn these suckers to the left. Boom, you're there. Want some more fuzz? Of course you do. Just take these fellas on a spin to the right.

Bias Knobs:These knobs vary the voltage to the collector of the second transistor. Turn 'em clockwise to fatten up your fuzz, or turn 'em counter-clockwise for a lean, choppy, gated fuzz tone.

Vol Knobs: Makes things louder, or less loud. Note: when running both sides at once, Side B's Vol control becomes the "master volume" while Side A's control becomes a "saturation" control.

Input Switch: These three-position switches adjust the input attenuation and wah friendliness of each side. "Right" is no attenuation. "Center" heavily cuts gain and bass, and "left" mildly cuts gain and bass. The center and left positions help adapt the Communication Breakdown to a more wah-friendly fuzz.

Color Switch: These are special three-position EQ controls that help you dial in your fuzz even further. "Left" rolls off some high-end and scoops the mids, "right" rolls off even more high-end and scoops even more mids. "Center" bypasses the EQ entirely.

Internal DIP Switches:Each side contains a DIP switch that toggles between Bold and Comp settings. Bold increases the output level and the midrange content, Comp delivers a softer and more compressed tone. Comp is the default setting, feel free to switch it up.

Input/Output:Instrument or other pedal goes on the right side; Amplifier or other pedal goes on the left side.

True bypass Footswitches:Turns each side of the effect on and off. Both Fuzz A and Fuzz B are independent.

Power:This pedal requires a center-negative 9 VDC power adapter with at least 10mA of current (not included). There is no option for a battery.

DIMENSIONS:

4.67" x 3.68" x 1.18" (119mm x 94mm x 30mm)
Read more
MRP:$333.81 SAVE 22%
coming soon $260.01
FORTHCOMING
Solid Gold FX Electroman MKII Oscillating Delay & Modulation Effects Pedal
Cat: 792811
 
Delay + modulartion pedal
Notes: The debate over which type of delay is "the best" is one that has plagued guitar shops and internet forums for half a century. On one hand, we have analog purists that prefer the murky degraded repeats of an analog delay, while digital users prefer the exacting repeats of ones and zeroes. But Solid Gold simply like delays that are excellent, and the Electroman MKII is just that: An excellent, feature-rich delay that does everything right.

The core of the Electroman MKII is two cascaded digital delay lines, making bold strides in the arena of PT2399 chips. The PT2399 is a chip developed for DJ rigs and karaoke machines, and when tuned correctly, blurs the line between digital and analog.

The mode toggle takes advantage of that unique dual-line approach, giving you standard delay or one that sends the repeats only to the second chip for a cool half-time sound that will sit front and center on your next ambient or shoegaze record.

The second footswitch of the Electroman MKII retains our warp feature, which sends the repeats ramping up to self-oscillation for ambient textures and spatial soundscapes. But this time, you control the sensitivity with one of three settings on the warp toggle, from gentle nudging into infinity to instant freakouts.

Delay repeats are backed by an extremely musical modulation circuit, which has three selectable speed ranges and a generous flutter control, which increases the depth as you roll it up. This control turns the Electroman MKII into an instant tape echo simulator, where you can dial in just the right amount of digital wear and tear.

While the Electroman MKII is equipped with buffered bypass, the tails switch lets you decide whether or not the Electroman MKII chokes off the repeats when switched off, or leaves them trailing into your amp when bypassed. This feature lets you sculpt your sound just how you like, allowing for precision interplay with your other effects by affecting just one passage.

Level, repeat and time controls come standard, with the time control maxing out at 1 second of warm delay. The Electroman MKII's color knob will settle the debate between analog and digital snobs by shaving treble content from the repeats as the control is increased.

An extra jack on the left edge takes the Electroman MKII to the next level: The fx loop jack lets you connect a stereo Y-cable to as many auxiliary pedals as you like, with the looped effect applying itself to the repeats. Try an octave pedal for true space exploration, a ring modulator for a lo-fi delay and even a volume pedal for swells of repeats.

Tone is always the goal, so if you want an outstanding delay unit that hacks through the vines of tiered menus and other complicated fluff, let the Electroman MKII be your machete.

KNOBS:

Level: Changes the amount of wet signal from nothing at all to highly involved.

Repeat: At zero, you'll find the humblest of all delays: the slapback. At full-blast, the repeats will run away and overtake your signal.

Color: This control takes a little treble off the top as you turn it. Fully left is bare-naked digital, and turning it up increases the murk.

Flutter: Controls the modulation depth. Keeping this control at zero shuts the circuit off.

Time: Changes the delay time from a double tracking-esque 70 milliseconds to a full lengthy second.

TOGGLE SWITCHES:

Warp (toggle): Changes the intensity of the Warp footswitch across three modes, from subtle (center) assertive (left) to imminent lift-off (right).

Mode: Changes between standard delay (left) and a special second mode(right), which sends the repeats slamming into the second delay line at half time.

Speed: Offers three different speed settings of the modulation circuit - slow in the center position, fast when toggled right and medium in the left position. See also: flutter knob.

Tails: The Electroman MKII is buffered bypass, and this switch lets you decide how you want the repeats to behave with the pedal switched off: choked off when switched left, or trailing when switched right.

AUXILIARY

FX Loop Jack: This jack lets you attach a stereo Y-cable, allowing you to patch in any number of effects. These effects let you apply external effects only to the repeats, for endless amounts of fun. You can even run a full external pedalboard in this loop. We won't tell. In addition, the loop also doubles an an expression input to control the level knob.

Input: Instrument or other pedal goes here.

Output: Amplifier or other pedal goes here.

Warp Footswitch: Engaged self-oscillation when and where you want it, and relents when you release it.

True Bypass/Trails Footswitch: Turns effect on and off.

POWER:

The Electroman II requires a center-negative 9VDC power adapter with at least 40mA of current (not included). Almost all power supplies meet this requirement, but check yours first.

DIMENSIONS

4.67" x 3.68" x 1.18" (119mm x
Read more
MRP:$333.81 SAVE 21%
coming soon $262.27
FORTHCOMING
Edifier R1850DB 2.0 Book Shelf Speakers
Cat: 808934
 
Bluetooth 4.0 powered 70W speakers
Notes: Edifier R1850DB 2.0 Book Shelf Speakers Active Bluetooth 4.0 Optical Input Subwoofer Line Out 70 Watt Piano Black

Subwoofer Supported Bookshelf Speakers

New Technology Familiar Design - Bringing back old school design with the latest technology. The R1850DB is an active 2.0 bookshelf speaker system designed at a 10-degree angle to accurately direct sound to you in the luxurious MDF wooden enclosure geared to minimise acoustic resonance. The mid woofer output produces quality sound and performance. The bass vibrates any room or space it inhabits, creating an ideal atmosphere for entertainment. The R1850DB is classic and fun with the latest Bluetooth technology allowing playtime from phones, tablets or laptops. When thinking of the R1850DB bookshelf speakers the first thing that comes to mind is balance; the perfect balance of function and design.

Comprehensive Controls - The R1850DB comes with a fully featured remote for the set of bookshelf speakers. Adjust the volume, switch inputs, mute the speakers and control Bluetooth connected playback all from your fingertips. The design of the remote with its modern sleek feel puts the power in your hands. Its easy to use and fits right in the palm of you hand providing the ultimate comfort. Edifier makes it easy on you with the simple remote commands for the R1850DB bookshelf speakers. Inputs are accessible with clear and concise functionality complimenting the manual.

Angle Design Directs Sound - Every aspect of Edifier's R1850DB bookshelf speakers are designed with purpose. The medium-density fibreboard [MDF] enclosure reduces distortion and minimises acoustic resonance. The base of the speaker is angled at a 10-degree incline for dynamic precision and delivery. The design of the angle directs sound from the woofers right to your ears producing 70 watts of balanced quality tunes. Edifier's R1850DB active bookshelf speakers are a stand out in both categories of style and performance. Its 4-inch midrange/woofer speaker drivers create rich lows. Meanwhile, the treble units produce clear highs. A perfectly tuned bookshelf speaker to suit your needs.

Bluetooth and More - A familiar design meets new technology. Featuring Bluetooth 4.1, the R1850DB bookshelf speakers can be paired with any device. Simply sync your smartphone, tablet or computer and listen to your favourite music, videos or games. The latest Bluetooth 4.1 wireless technology is great for playing from multiple devices.
Read more
coming soon $188.47
FORTHCOMING
Solid Gold FX Beta MKII Bass Preamp & Overdrive Effects Pedal
Cat: 792797
 
Preamp & bass overdrive effects pedal
Notes: With more and more bass players using pedals these days, its no surprise that four-stringers are looking to pedals to sweeten their tones. Sometimes, bassists must play direct, sometimes there are mix issues, and bass players are often required to keep their tone, and thus pedal selection, "tasteful" in the traditional sense. What if there was a pedal that answered all of these, and that it was dead simple to dial in right out of the box? There it is- the Beta MKII, you just might call it "the answer".

The Beta MKII is a beefed-up version of the original Beta circuit, giving you plenty of tube-like gain without the fizz or hassle. Two modes of operation dictate the amount of grime, tonal colorization, or both. These modes are Preamp and Overdrive.

The Beta MKII's Preamp side disengages the Gain control for a smooth, even-keeled preamp colorization. Both Tone and Volume controls are active in this position, for a subtle sweetening that you'll never turn offithink of those old Muscle Shoals tones or an Ampeg B15 Portaflex.

Flicking the switch to Overdrive mode reconnects the Gain control and gives you as much breakup as you could want, giving you harmonically-rich overdrive without being too aggressive or snappy. It sits just the way you want it to without overpowering anyone else. You'll be a better bandmate as a result.

Due to the expertly voiced EQ of the Beta MKII, you can warm up any lifeless rig, boring recording console or sterile mixer while still retaining dynamics and low-end. Perfection.

KNOBS:

Gain: Turn it up to give you a good amount of smooth, buttery gain that won't disrupt your low frequencies (hooray!)

Tone: Turn it left for a darker tone, turn it right for a brighter one.

Vol: Plenty of output to keep your amp nice and tight.

TOGGLE SWITCHES:

Mode: Two positions give you utmost flexibility. The left position gives you Preamp mode, which delivers a lighter, more tailored gain range that keeps you present. The right side is Overdrive mode that opens the Beta's full gain range up.

AUXILIARY:

Input: Instrument or other pedal goes here.

Output: Amplifier or other pedal goes here.

True bypass footswitch: Turns the effect on and off.

POWER:

The Beta MKII requires a center-negative 9-18VDC power adapter with at least 6mA of current (not included). Almost all power supplies meet this requirement, but check yours beforehand.

DIMENSIONS:

4.39" x 2.34" x 1.06" (112 x 60 x 27mm)
Read more
MRP:$189.39 SAVE 20%
coming soon $151.01
FORTHCOMING
Edifier R2000DB Wood 2.0 Book Shelf Speakers (black/brown, pair)
Cat: 808944
 
120W Bluetooth speakers with built-in wireless controls
Notes: Edifier R2000DB Wood 2.0 Book Shelf Speakers Bluetooth Optical Input120 Watts Classic Wood Grain

Versatile speakers equipped to deliver an authentic listening experience.

Astonishing sound - Not only is the R2000DB stunning, this bookshelf speaker will leave you speechless. An ideal speaker for computers, gaming consoles and mini home theatres. Its comfortable in just about any environment, giving it the diverse functionality suited for any lifestyle. It houses an encased MDF wooden enclosure which minimises acoustic resonance. The R2000DB bookshelf speakers considers your Hi-tech needs and concerns while driving quality performance and entertainment value. Edifier's bookshelf speakers with Bluetooth capability produces spectacular sound with exceptional presentation.

Eagle Eye - Using newly developed 25mm silk dome "Eagle Eye" tweeters, this bookshelf speaker makes the slightest sounds clear. With desirable dimensions and improved specs the "Eagle Eye" lives up to its reputation and demand. With the redesigned elements of the R2000DB bookshelf speakers, distortion in your audio experience is a thing of the past. Edifier has built in Digital Signal Processing (DSP) and Dynamic Range Control (DRC) to minimise distortion, keeping your listening experience in mind. Your studio is precious and should not be defiled with the inconsistencies of outdated designs.

Function Meets Style - Edifier's R2000DB bookshelf speakers has a high gloss piano finish as a touch of elegance to match your rooms decor. Any studio or living space housing these bookshelf speakers should be met with thoughtful design and comfortable style. The luxury of a gloss finish is something Edifier does not take for granted. The R2000DB speakers exemplify this reality.

Versatile and dual connection - Connect devices to the R2000DB through optical and RCA input. You can also have more than one device plugged in at a time. Using Bluetooth, you can pair your smartphone and avoid using wires. The versatility of the R2000DB bookshelf speakers seek to deliver an authentic listening experience mirrored with Hi-tech wireless functionality. Edifier providers all the bells and whistles characteristic of Bluetooth aptitude.

Built-in and wireless controls - The R2000DB comes with a wireless remote for your convenience. Or use the side panel on the speaker to adjust bass, treble and master volume. Control your bookshelf speakers and connect to your device in comfort. The classic design of the R2000DB fits right in your hand and gives you total demand of your experience; all at your fingertips.
Read more
coming soon $227.07
FORTHCOMING
Edifier R2000DB Black 2.0 Book Shelf Speakers (pair, black)
Cat: 808952
 
120W Bluetooth speakers with wireless controls
Notes: Edifier R2000DB Black 2.0 Book Shelf Speakers Bluetooth Optical Input120 Watts Piano Black

Versatile speakers equipped to deliver an authentic listening experience.

Astonishing sound - Not only is the R2000DB stunning, this bookshelf speaker will leave you speechless. An ideal speaker for computers, gaming consoles and mini home theatres. Its comfortable in just about any environment, giving it the diverse functionality suited for any lifestyle. It houses an encased MDF wooden enclosure which minimises acoustic resonance. The R2000DB bookshelf speakers considers your Hi-tech needs and concerns while driving quality performance and entertainment value. Edifier's bookshelf speakers with Bluetooth capability produces spectacular sound with exceptional presentation.

Eagle Eye - Using newly developed 25mm silk dome "Eagle Eye" tweeters, this bookshelf speaker makes the slightest sounds clear. With desirable dimensions and improved specs the "Eagle Eye" lives up to its reputation and demand. With the redesigned elements of the R2000DB bookshelf speakers, distortion in your audio experience is a thing of the past. Edifier has built in Digital Signal Processing (DSP) and Dynamic Range Control (DRC) to minimise distortion, keeping your listening experience in mind. Your studio is precious and should not be defiled with the inconsistencies of outdated designs.

Function meets style - Edifier's R2000DB bookshelf speakers has a high gloss piano finish as a touch of elegance to match your rooms decor. Any studio or living space housing these bookshelf speakers should be met with thoughtful design and comfortable style. The luxury of a gloss finish is something Edifier does not take for granted. The R2000DB speakers exemplify this reality.

Versatile and dual connection - Connect devices to the R2000DB through optical and RCA input. You can also have more than one device plugged in at a time. Using Bluetooth, you can pair your smartphone and avoid using wires. The versatility of the R2000DB bookshelf speakers seek to deliver an authentic listening experience mirrored with Hi-tech wireless functionality. Edifier providers all the bells and whistles characteristic of Bluetooth aptitude.

Built-in and wireless controls - The R2000DB comes with a wireless remote for your convenience. Or use the side panel on the speaker to adjust bass, treble and master volume. Control your bookshelf speakers and connect to your device in comfort. The classic design of the R2000DB fits right in your hand and gives you total demand of your experience; all at your fingertips.
Read more
coming soon $227.07
FORTHCOMING
Edifier 4004957 R1280Ts Bluetooth Powered Bookshelf Speakers
Cat: 808978
 
Bluetiooth speakers with subwoofer output
Notes: Edifier 4004957 R1280Ts Bluetooth Powered Bookshelf Speakers with Subwoofer Output Includes Remote Control 42 Watts Walnut look (Brown)

Studio-Quality Sound - 42W RMS undistorted power, 4-inch bass driver, and 1/2 inch silk dome tweeter produce solid studio-quality sound that is ideal for gaming, movies, and music. Connect to your computer, home theater, and more..

Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique feature creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Removable Mesh Grill

Precise Controls - Convenient dials on the side panel of the speaker allows you to adjust the bass, treble, and volume.

Wireless Remote - Adjust volume, mute/unmute, and select sound field extension with the wireless remote, no need to leave the couch.

Sub-out Interface and more - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Dual RCA inputs allow you to connect to two devices at a time. Connect to your devices such as phone, PC, laptop, tablet, or gaming console with RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These outstanding speakers are made from MDF wood with a walnut finish-vinyl, designed to prevent resonance. A great addition to your living room, office, or study.
Read more
coming soon $113.54
FORTHCOMING
Edifier R1700BT2.0 Book Shelf Speakers Bluetooth 66 Watts Classic Finish
Cat: 808987
 
Bluetooth speakers with a classic wood finish
Notes: Edifier R1700BT 2.0 Book Shelf Speakers Bluetooth 66 Watts Classic Wood Finish

Quality sound - The versatile R1700BT Bluetooth bookshelf speakers will have you wanting to play every device off them. Plug in your gaming console, computer or TV for exceptional sound quality. The multifunctional excellence that illuminates from these Bluetooth bookshelf speakers delivers such clear entertainment value. The R1700BT has built in Digital Signal Processing (DSP) and Dynamic Range Control (DRC) to prevent distortion; Hi-tech bookshelf speakers truly fit for your listening experience. The R1700BT Bluetooth bookshelf speakers allow for clean aesthetics without losing quality or performance. It brings new meaning to clear sound. Fashioned with a 10-degree angle to direct the sound exactly at you, it creates a better listening experience as it reduces interference.

Eagle Eye tweeter - Using newly developed 19mm "Eagle Eye" dome tweeters, this Bluetooth bookshelf speaker makes the slightest sounds clear. With desirable dimensions and improved specs the "Eagle Eye" lives up to its reputation and demand. Its satisfying sound making your tunes rich and full delivering a full professional listening experience.

Sophisticated style - The R17000BT Bluetooth bookshelf speakers are enclosed in hand picked walnut vinyl, for an elegant look. Fashioned with a 10-degree angle to direct the sound exactly at you, it creates a better listening experience as it reduces interference. The high quality classic wood finish serves as a great compliment to any home decor

Solid bookshelf speaker - 4-inch bass drivers in each speaker create rich lows and clear highs. With the front facing bass reflex port, low frequencies are emphasised giving the bass more power. Pair your smartphone to the chic bookshelf speaker through Bluetooth. With a touch of a button, you can hear endless music from your R1700BT.

Manage your music - Conveniently located dials on the side of the speaker allow complete control of audio, bass and treble. You can also alter your music from the ease of your couch with the wireless remote. R1700BT remote is a compact sized remote control that helps you manage volume and select input source from across the room. Pair your smartphone to the chic bookshelf speaker through Bluetooth. With a touch of a button you can hear endless music from these Bluetooth speakers. The R1700BT comes with all cables you will potentially need to enjoy your music right out of the box.
Read more
coming soon $143.05
FORTHCOMING
Edifier R1280DB Black 2.0 Book Shelf Speakers Bluetooth Optical Input42 Watts Piano Black
Cat: 808992
 
Bluetooth speakers with wireless remote control
Notes: Edifier R1280DB Black 2.0 Book Shelf Speakers Bluetooth Optical Input42 Watts Black Wood

A newly refined look you love with a twist. Black wood keeps the classic look with a fresh twist on the style of modern technology. Innovation and style are important elements that accompany the feel of the R1280DB Bluetooth bookshelf speakers. Hi-tech quality and style drive the overall experience of this powerful black bookshelf speaker. Upon first glance the black wood finish gives any reviewer the impression of a sleek and stealthy Bluetooth speaker ready to deliver powerful performance.

Edifier's Speakers Just Got Better - The R1280DB has the classic look you love with all new features of modern powered Bluetooth speakers. The clean wooden finish of the R1280DB bookshelf speakers leave a lasting impression of elegance and luxury. The upgraded specs accommodate a standard of professionalism while improving quality and performance. The naturally fine tuned Bluetooth bookshelf speaker is enjoyable in just about any setting enhancing the style of your domestic living space.

All New Style - A newly refined look you love with a twist. Black wood keeps the classic look with a fresh twist on the style of modern technology. Innovation and style are important elements that accompany the feel of the R1280DB Bluetooth bookshelf speakers. Hi-tech quality and style drive the overall experience of this powerful black bookshelf speaker. Upon first glance the black wood finish gives any reviewer the impression of a sleek and stealthy Bluetooth speaker ready to deliver powerful performance.

On-board Controls - Adjust the EQ using the on-board controls located on the active/powered Bluetooth speaker. Treble, bass, and volume knobs located on the side panel. The clear accessibility to on-board controls and modern functionality heighten the amiability of the R1280BD powered Bluetooth speakers. Clear and concise controls compliment the manual providing uninterrupted playtime.

Fully Featured Inputs - Achieve HD audio with the help of the optical and coaxial inputs which are additions to the R1280DB Bluetooth speakers. We have kept the two RCA connections for both RCA and AUX connection. Also, wirelessly connect to your phone or laptop with Bluetooth. Edifier Bluetooth bookshelf speaker specs provide for the quintessential modern experience. Comprehension and control, all at your fingertips.

Wireless Remote Control - Easily switch between inputs, adjust volume and power with the use of the remote. The features of our black remote add that extra layer of modern delight. Comfort and convenience is what the R1280DB seeks to provide with inclusion of the remote. Control at your fingertips yet again, with the R1280DB Bluetooth powered bookshelf speakers.
Read more
coming soon $123.76
FORTHCOMING
Edifier R1280DB Wood 2.0 Book Shelf Speakers Bluetooth Optical Input42 Watts Wood Grain
Cat: 808998
 
Bluetooth speakers with remote wireless control
Notes: Edifier R1280DB Wood 2.0 Book Shelf Speakers Bluetooth Optical Input42 Watts Wood Grain

Edifier's Speakers Just Got Better

The R1280DB has the classic look you love with all new features of modern powered Bluetooth speakers. The clean wooden finish of the R1280DB bookshelf speakers leave a lasting impression of elegance and luxury. The upgraded specs accommodate a standard of professionalism while improving quality and performance. The naturally fine tuned Bluetooth bookshelf speaker is enjoyable in just about any setting enhancing the style of your domestic living space.

All New Style - A newly refined look you love with a twist. Black wood keeps the classic look with a fresh twist on the style of modern technology. Innovation and style are important elements that accompany the feel of the R1280DB Bluetooth bookshelf speakers. Hi-tech quality and style drive the overall experience of this powerful black bookshelf speaker. Upon first glance the black wood finish gives any reviewer the impression of a sleek and stealthy Bluetooth speaker ready to deliver powerful performance.

On-board Controls - Adjust the EQ using the on-board controls located on the active/powered Bluetooth speaker. Treble, bass, and volume knobs located on the side panel. The clear accessibility to on-board controls and modern functionality heighten the amiability of the R1280BD powered Bluetooth speakers. Clear and concise controls compliment the manual providing uninterrupted playtime.

Fully Featured Inputs - Achieve HD audio with the help of the optical and coaxial inputs which are additions to the R1280DB Bluetooth speakers. We have kept the two RCA connections for both RCA and AUX connection. Also, wirelessly connect to your phone or laptop with Bluetooth. Edifier Bluetooth bookshelf speaker specs provide for the quintessential modern experience. Comprehension and control, all at your fingertips.

Wireless Remote - Easily switch between inputs, adjust volume and power with the use of the remote. The features of our black remote add that extra layer of modern delight. Comfort and convenience is what the R1280DB seeks to provide with inclusion of the remote. Control at your fingertips yet again, with the R1280DB Bluetooth powered bookshelf speakers.
Read more
coming soon $123.76
FORTHCOMING
Edifier R1280T2.0 Powered Book Shelf Speaker 42 Watts Classic Wood Finish (brown, pair)
Cat: 809006
 
Bluetooth speakers with dual RCA inputs
Notes: Edifier R1280T 2.0 Powered Book Shelf Speakers 42 Watts Classic Wood Finish

The R1280T powered bookshelf speakers has combined a retro look with a modern sense of audio quality. If you're looking for affordable and versatile bookshelf speakers with uncompromising sound the R1280T bookshelf speakers is your go-to 2.0 speaker system. Featuring a 4-inch bass driver and a calibrated, flared bass reflex port, this bookshelf speaker system delivers robust, rich bass notes that are full of presence and depth. The faithful sound production and performance of the R1280T are any audiophiles dream. Most Edifier customers are using our R1280T powered bookshelf speakers for connecting their turntables for the best audio experience. Enjoy your classic vinyl's while enjoying the advancements in modern day audio technology.

Personalise your listening experience with the bass, treble and volume dials on the active bookshelf speaker. The quality sound produced form these bookshelf speakers deliver a precise booming midrange that tantalises any reviewer. A compact sized handy remote control is included. You can adjust the volume and set the speakers to mute when needed without having to reach the speakers; power and perfection at your fingertips. The Edifier R1280T comes with built-in tone control at the side of the active speaker. Depending on the preference, you can make micro adjustments of treble and bass from -6 to +6 db. Digital volume control is automatically set to a comfortable level everytime the speakers are powered on.

R1280T powered bookshelf speakers lets you connect to multiple audio devices using the dual RCA inputs. By looking at the back panel you can easily tell one of these is a passive speaker and one is an active speaker. The active speaker has two inputs located on the back. These inputs are perfect for RCA to RCA or RCA to AUX connections. Connect them to a PC, laptop, tablet, phone or record player. The speakers are connected to each other via regular speaker wire. The variety of cables included ensures our customer enjoy their music from most devices right out of the box.
Read more
coming soon $94.23
FORTHCOMING
Edifier 4003653 SS02 Speaker Stands For S2000Pro /S1000DB/S1000MKII (pair, brown/black)
Cat: 794311
 
Paired 26.5" wood grain speaker stands for S2000Pro /S1000DB/S1000MKII
Notes: The S2000Pro/S1000db/S1000MKII stands are a great addition to any home or studio audio set up. It adds style and functionality all in one. The S2000pro/S1000db/S1000MKII stands are a breeze to set up and enhances the look and feel of any environment its in. The atmosphere changes once we set our eyes on the clean lines and wooden finish of these speaker stands.

The well-designed S2000pro/S1000db/S1000MKII speaker stands place the speaker on a solid platform, which helps achieve the best overall sound quality, especially bass. The elegant design negates the effect that vibrations may cause.

Hollowed design - ready to fill with sand to increase stability and eliminate resonance.
Read more
coming soon $164.63
FORTHCOMING
Edifier 4004964 R1280DBs Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers (black)
Cat: 794321
 
42-watt paired Bluetooth 5.0 speakers
Notes: Edifier 4004964 R1280DBs Black Powered Bluetooth 5.0 WirelessDesktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs Includes Remote Control and Cables (Black)

Multiple Inputs: Optical, Coaxial, Bluetooth, Dual RCA, Subwoofer output

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: LINE IN 1, LINE IN 2, Optical, Coaxial, Bluetooth

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial R/L:350i50mFFS,Bluetooth R/L:700i50mFFS

Includes RCA to RCA cable, RCA to 3.5mm cable, Fiber Optic input cable, Speaker Connnecting cable, Remote Control
Read more
coming soon $148.73
FORTHCOMING
Edifier 4004971 R1700BTs Bluetooth 5.0 Wireless Bookshelf Speakers (pair, brown)
Cat: 794344
 
Paired 66-watt bookshelf Bluetooth 5.0 speakers
Notes: Edifier 4004971 R1700BTs Powered Bluetooth 5.0 Wireless Bookshelf Speakers Pair 66 Watts With Built in Amp and Multi Inputs Includes Remote Control and Cables (Brown)

Rich and Detailed Sound

Soundfield Spacializer - Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique feature creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Impressive Wood Finish - MDF wood with walnut wood finish-vinyl makes it a perfect addition to your living room, office, or study.

Bluetooth 5.0 with Qualcomm aptX - No wires required! Connect to devices using Bluetooth 5.0 technology. Enjoy listening from your phone, laptop, or tablet with wireless connection, works with iOS, Android, Mac, or Windows devices.

Eagle Eye Tweeter - 30W + 36W RMS undistorted power, 4 inch woofer, and 19mm silk dome tweeter, the Edifier R1700BTs active Bluetooth bookshelf speakers make even the hardly-noticeable sounds very clear. And the DSP(Digital Signal Processing) and DRC (Dynamic Range Control) helps to minimize distortion for improved audio even at low volume.

Multiple ways to connect - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Dual RCA inputs allow you to connect to two devices at a time. Connect to your devices such as phone, PC, laptop, tablet, or gaming console with RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Built-in Controls - Convenient dials on the side panel of the speaker allows you to adjust the bass, treble, and volume, press the volume dial to toggle between inputs.

Wireless Remote - Adjust volume, mute/unmute, switch inputs, Bluetooth, select sound field extension, and line-in mode with the wireless remote, no need to leave the couch.

Removable Grill - Protects your speaker drivers, easy to remove for cleaning.

TOTAL POWER OUTPUT: R/L(high): 15W+15W, R/L(mid-low): 18W+18W

BLUETOOTH VERSION: Qualcomm 3031/V5.0

INPUT SENSITIVITY: LINE IN 1: 700i50mV, LINE IN 2: 550i50mV, Bluetooth: 400i50mV

INPUT: LINE IN 1, LINE IN 2, Bluetooth

DRIVER UNIT: F19mm tweeter unit + 4 inches woofer

SIGNAL-TO-NOISE RATIO: =85dBA

FREQUENCY RESPONSE: 52Hz-20KHz

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $168.04
FORTHCOMING
Edifier 4004988 S1000DBMKII Bluetooth 5.0 Wireless Active Bookshelf Speakers (pair, brown)
Cat: 794392
 
Paired 120W Bluetooth 5.0 powered bookshelf speakers with built-in amp and multi inputs
Notes: Turn on the Speaker, Juice up the World - S1000MKII Audiophile Active Bookshelf 2.0 Speaker.

Includes Remote Control and Cables

120 Watts Stunning Sound Performance - A new Class D Amp boosts the system's already impressive power to a new height, crank the volume while still maintaining crystal clear audio.

Bluetooth 5.0 with aptX HD Decoding - Stream high-quality audio wirelessly with reduced latency and increased stability.

Titanium Dome Tweeter - A titanium dome is a high-quality unit that can only use in hi-fi level high-end speakers. Restore high-frequency signals up to 40KHz to obtain a clearer, brighter, transparent, and pure tone.

Simpler but Much More Stylish - Aluminum bass speaker for surge and wave bass, pure sound with advanced titanium dome tweeter. Designed with classic wooden side panels, the S1000 MKII is angled to ensure front-facing drivers positioned for optimum performance without compromise.

Metal Diaphragm, Medium Bass Unit - The 5.5-inch aluminum alloy mid-woofer unit has the characteristics of high strength and low distortion. By the precise analysis of the KLIPPEL system in Germany and the advantages of DSP full digital electronic frequency divider, the performance of the unit is more accurate, faster, cleaner, and more powerful.

DSP Digital Audio Processing - Built-in Texas instruments DSP professional audio processing chip TLV320AIC3254, and use its miniDSP to complete electronic frequency division and dynamic management for accurate control of frequency division point, so that the speaker can better display the sound details.

Multiple Inputs Connection - With its optical, coaxial, and auxiliary inputs, it can connect to multiple devices such as TV sets, TV boxes, Blu-ray player, game console, CD player, DVD, mobile phone, computer, tablet, or other devices.

Wireless Remote Control - Swap inputs, playback, or adjust the volume with the included remote while still able to sit on the sofa, help you to take full control of your sound wirelessly.

TOTAL POWER OUTPUT: RMS 25W×2(Treble) +35W×2(Mid-range bass)

FREQUENCY RESPONSE: 45Hz~40KHz

MIDRANGE / BASS UNIT: 5.5 inch

SIGNAL-TO-NOISE RATIO: = 90dBA

INPUT SENSITIVITY: Line in 1:750i50mV / Line in 2 :900i50mV OPT, COX: 350 mFFs i 50 mFFs Bluetooth: 450i50mV

Treble Unit: 1 Inch

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $369.01
FORTHCOMING
Edifier 4005046 R1280DBs Bluetooth Desktop/Bookshelf Speakers (pair, brown)
Cat: 794466
 
24W paired desktop/bookshelf Bluetooth 5.0 speakers with built-in amp and multi inputs
Notes: Edifier 4005046 R1280DBs Brown Powered Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs

Includes Remote Control and Cables

Classic Design

Bluetooth 5.0 - Experience true freedom from wired connections with this Bluetooth speaker and enjoy the best audio. You can connect it to devices wirelessly using Bluetooth 5.0, suitable for iOS, Android, Mac, or Windows devices.

Soundfield Spacializer - Built-in Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique chipset creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: Bluetooth, LINE IN 1, LINE IN 2, Optical, Coaxial,

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: R/L:350i50mFFS , Bluetooth R/L:700i50mFFS, LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial,

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $148.73
FORTHCOMING
Modulaire Maritime Decca Voltage Source/Manual CV Gate/Muting Control Module
Notes: This module is a manual control module for modular synth. Thought for live performance or to bring more manual control while recording in "one take" the module is, at the same time:

-Voltage source
-Manual CV-Gate
-Muting - Control module

Details & use:

Two voltage source's outputs (at the top) provides voltages from 0 to 5V*. Those voltages are buffered thru op-amp and are controllable by potentiometers. Each have a dedicated button-switch so the selected voltages can be applied precisely (for exemple applying it on filter's cv's, oscillator's fm, delay's cv, etc.) on one part of the sequence for eg. or at desired moment.
Those buttons are maintained (enable/disable, stays active when pressed) and are illuminated when "on".

The voltage sources, beside their use for manual cv modulation, are also very useful in all situation where fixed voltages are needed (to fix and keep desired cv amount, for the same accent on drum module for ex. or when using an external instruments who works on line level so much more quite than modular- once connected to a modular-you'll need a constant voltage to keep the VCA permanently open so that the instrument can reach the modular's level and you can hear it, use it normally, etc.

The four grey button-switches (on the sides) are the simple manual gates and are momentary with no latency. They will send gate signal as long as you keep them pressed (led indicated).
You'll use them to trigger manually an envelopes, play drum modules for eg, apply it on any other cv/gate input..

The three illuminated button-switches have inputs so they can be used to mute signals.

The two on the bottom are maintained while the one in the middle is momentary - for the bigger flexibility of use. The button's leds will indicate the signal going thru.

You'll use those switches to stop, mute one signal let go another one, break a sequence's gate with another one from the another switch, etc. -all under your fingers!

If nothing is plugged in the inputs of those switches they'll find their manual gate use-just like their neighbor buttons.

Made for more fun with a modular!
Read more
MRP:$137.61 SAVE 36%
coming soon $88.55
FORTHCOMING
Rides In The Storm Modules SUN Compact Eurorack Power Adapter Module
Cat: 805807 Rel: 01 Feb 21
 
Eurorack power adapter module
Notes: Rides In The Storm Modules SUN Compact Eurorack Power Adapter Module
Read more
coming soon $183.92
FORTHCOMING
Tenderfoot Electronics Hike 2 Channel LFO/EG/Random CV Source Module
Cat: 805885 Rel: 01 Feb 21
 
2-channel envelope generator module
Notes: Hike

Hike is the new 2 - channel envelope generator from Tenderfoot Electronics.

Each channel has 3 main modes:
Red = Looping envelope 0V to 8V
Green = One-shot triggered A/D envelope
Yellow = ASR envelope for use with longer gate signals.

Each channel has separate mode buttons, rise and fall knobs, as well as additional CV control over the rise and fall.

Each channel has an attenuator to dial back the 0V to 8V output.

Holding the mode button puts the channel into random voltage mode and acts similarly to a sample and hold circuit.

The 'rise' knob alters the rate at which the sample triggers occur.

the 'fall' knob adjusts the level of randomness from one sample to the next.
Read more
MRP:$216.64 SAVE 13%
coming soon $188.47
FORTHCOMING
Tenderfoot Electronics Ease 3 Channel Mixing Attenuverter Module
Cat: 805886 Rel: 01 Feb 21
 
3-channel attenuverter/CV & audio mixer module
Notes: Ease is a 4HP, 3-channel attenuverter that can also be used as a CV or audio mixer.

If their outputs are not in use, channel 1 and 2 mix into the output of channel 3.

With the inputs unpatched, each channel can be used as a +/- 5V DC source.
Read more
MRP:$121.26 SAVE 21%
coming soon $95.36
FORTHCOMING
Gamechanger Audio Footswitch for Plus Sustain Pedal
Cat: 807408 Rel: 15 Feb 21
 
Footswitch pedal for Gamechanger Plus Sustain
Notes: This is a special Footswitch that gives you quick and easy access to the PLUS Pedal's "WET only" mode.

Acting as a kill-switch for your instruments DRY signal (which is useful to have on your board anyway), it lets you build huge drones and then drop your instrument back into the mix with one click!.

The WET Only Footswitch serves as a remote foot-controller that bypasses the SPLIT & MIX toggle switch on the PLUS Pedal's side panel, thus letting you switch in and out of the WET Only mode on the fly.

This flexibility allows you to build up a rich layer of ambient sound effects and then quickly unmute your instrument and return to playing on top.

(Note: Switch for OUT 1 must be set to MIX in order to use footswitch.) When using the WET Only footswitch (plugged into "CLEAN OUT/FSW"), you can still access the DRY only signal through a special DRY OUT output built into the Footswitch itself.

Input: 1/4" TRS (Stereo) in from PLUS Pedal, TRS Cable is included
Output: 1/4" Mono Dry Out
Product Dimensions: WLH 58 x 66 x 46 mm (2.3 x 2.6 x 1.8 in)
Product Weight: 230 g (0.5 lbs)

Read more
MRP:$53.14 SAVE 19%
coming soon $43.14
FORTHCOMING
Tenderfoot Electronics Ringr Dual Passive Ring Modulator Module
Cat: 805877 Rel: 01 Feb 21
 
Dual passive ring modulator module
Notes: Ringr - a Father Moo inspired passive ring modulator.

Inspired by Father Moo and designed by Tenderfoot Electronics,

ringr is a 2-channel, transformer-based, passive ring modulator.

Leaving the carrier unpatched, the input is routed through the diodes acting as a wave rectifier.

With both the input and carrier patched, ringr gives you 2 channels of that classic ring modulator sound in 4HP!
Read more
MRP:$134.89 SAVE 26%
coming soon $99.91
FORTHCOMING
Rides In The Storm Modules TUL Dual Attenuverter & Offset Generator Module
Cat: 805793 Rel: 01 Feb 21
 
Dual attenuverter/offset generator module
Notes: TUL Dual Attenuator/-verter and Offset Generator

Temperature stable and accurate circuit design. The attenuator is exponential and can be regulated more precisely in the initial range.

As an attenuverter, the fader describes an S-curve, i.e. it is in Range +/- 0 finer adjustable. The AC gain is 1, so there is no loss at maximum Att/Attv settings.

The offset potentiometer shift by +/- 5 volts and can be switched to another mode on the back of the PCB using jumpers.

Here the attenuation is towards zero made until it is zero.

The normal mode leaves the voltage at the specified offset value.

Channel A is normalized to channel B so you can get two different CVs.

On the rear side of the PCB, you have a jumper to switch from offset pre fader (good for ADSR) and post fader.

Power consumption: +/- 20mA

Rackspace: 6HP

CV out is (-/+5Volt) if nothing is patched to IN A/B, so you can use it as a manual CV source.
Read more
coming soon $74.92
FORTHCOMING
Tenderfoot Electronics Cells Expander Module (for Lattice)
Cat: 805816 Rel: 01 Feb 21
 
Expander module
Notes: Cells adds a number of additional features to Lattice:

A 3x4 grid of keys to select steps manually and play the sequencer more like an instrument.

Forward / Reverse mode controlled by a CV trigger and physical button.

Random step selection by CV trigger.

CV selection of the current step - great for inputting a positive envelope or LFO to cycle through the steps on the Lattice.

Gate output - Whenever a new step is navigated to, a pulse will be output by Cells in order to trigger a voice's envelope. Pressing on the keypad will also output a constant gate signal.
Read more
MRP:$298.39 SAVE 24%
coming soon $227.07
FORTHCOMING
Sound Force DCO Digitally Controlled Oscillator Module
Cat: 804293 Rel: 25 Jan 21
 
Oscillator module
Notes: The SoundForce DCO is an oscillator for Eurorack based on the architecture of the Juno-60/106 oscillator section. It is a modern homage to that sound using technology from the future. It provides true analog waveforms with digital stability.

A DCO is not an all-analog VCO but also not a digital oscillator. It's an hybrid design that combines the best of both. Similarly to many VCO's, the DCO generates its core waveform, the saw wave, by charging a capacitor in an op-amp integrator configuration. A VCO will restart the waveform cycle when the signal has reached its maximum amplitude. But the DCO starts an new cycle when a micro-controller, a small computer chip, commands it to. The micro-controller also controls the rate at which the capacitor is charging, hence the frequency of the oscillator. As with a digital oscillator, the DCO acquires the CV input voltages and turns them into numbers that will later set the frequency of the oscillator. This is done inside the micro-controller using 16 bits sigma-delta analog to digital converters. All signals are true analog signals. The PULSE wave is derived from the SAW wave using a comparator and the SUB oscillators are generated using a flip-flop IC. Furthermore, the use of a very modern micro-controller with built-in 32 bits timers have improved the frequency accuracy a lot compared to the original design.

The SoundForce DCO features 10 slide pots (faders) reminiscent of the Roland synths. 5 sound sources are available: SAW, PULSE, SUB1 (1 octave lower), SUB2 (2 octaves lower) and NOISE. The built-in mixer allows you to mix them together using the faders and the MIX output jack. The PULSE has manual pulse width control, as well as PWM with a CV input and an attenuator. An FM input is also available with an attenuator. The oscillator can be hard synced to another oscillator using the SYNC input.

Specifications:
16HP
Frequency range : 20Hz - 14kHz
Depth: 38mm (including power connector)
Power: +12V 82mA, -12V 26mA
V/OCT input range -3 to 7V
FM input range -5V to 5V
PWM input range -5V to 5V
Read more
MRP:$272.50 SAVE 18%
coming soon $224.80
FORTHCOMING
LA67 MACA Filter Module
LA67 MACA Filter Module (synth module)
Cat: 806156 Rel: 01 Feb 21
 
4-pole multimode filter module
Notes: A 4-pole multimode filter based on the SSI2140 integrated circuit. Essentially an updated version of the classic SSM2040, the new SSI2140 adds better temperature compensation and a VCA that helps eliminate low frequency damping at high resonance settings. Besides the obligatory 4-pole low pass, MACA adds both 2-pole low pass and 4-pole band pass outputs. There is also a input level control that allows you to easily overdrive the filter core.

Technical Specifications:

6hp
20mm depth
Current draw: 25mA/25mA +12v/-12v

Reverse power polarity protection
Read more
coming soon $219.13
FORTHCOMING
AniModule MIDI_Gate Module
AniModule MIDI_Gate Module (MIDI synth module)
Cat: 793791
 
MIDI gate interface module
Notes: The AniModule MIDI_Gate is an easy way to integrate your MIDI-synced workflow with your Modular Synth.

10 Gate Outs that correspond to MIDI notes C1 - A1 (36 - 46).

MIDI NoteOn >> Gate is High

MIDI NoteOff >> Gate is Low

Programmed to receive on MIDI Channel 10

All this in 4HP!!!

Use it to send Multiple Clocks synced to your main Clock.

Use it to trigger events to effect samples piped in via a Line_Amp or TrAniModule in realtime in the analog domain for Live Performance or Resample.

Use it to interface in realtime with your Keyboard, Pad Based Controller, or DAW.

Width = 4HP

Depth = 33mm
Read more
MRP:$212.55 SAVE 17%
coming soon $177.11
FORTHCOMING
AniModule Gate_Mod Module
AniModule Gate_Mod Module (clock modulator / dual stereo / frequency divider synth module)
Cat: 793797
 
Gate modifier & trigger delay module
Notes: Got a gate that's gonna make you late? Run it through the Gate_Mod! Got a trigger comin' sooner than you figger'd? Run it through the Gate_Mod!!

Let's face it, couldn't we ALL use a little more length?

This Tiny (yet powerful) Module allows you to manipulate your gate length and delay your event triggers with ease and minimal impact on your HP.

Take an incoming Signal above ~1.1V (OpAmp Comparators on the Inputs make very forgiving Clock Inputs) and shrink it down to 5MS or lengthen it up to 5 Seconds.

That Gate will appear at the Gate Out.

When the Gate is Over a 10MS Trigger will turn on at the Delay Out.

Set the length of the Gate with the Time Potentiometer OR with the CV Input.

The switches allow you to choose between Interrupt OR Dividing Behavior (1 for each channel).

If you have Interrupt selected, when Clock In receives a new Clock Pulse the time will reset, essentially lengthening your Gate Out and Delay Out to the Time you have set + the time that has already elapsed.

So Gate will never go Low and Delay will never go High if you have a Time set longer than the interval between Clock Pulses (Useful if you have staggered, irregular or random Clocks).

When Dividing is selected Clock In will Ignore new Clock Pulses until it has finished the current cycle it's running.

The Delay 1 Out is Normalled via the Jack switch of the Clock 2 Input for all kinds of Timing madness!

Width = 4 HP
Depth = 37mm
Current Draw:
+12V = 35mA
-12V = -18mA

*The Gate_Mod firmware has been updated as of Mid August 2015. There was a bug in the Delay Out section that prevented it from resting at full 0V. All Gate-Mods shipped After the Firmware was updated include the new revision.
Read more
MRP:$200.29 SAVE 17%
coming soon $166.89
FORTHCOMING
Patching Panda Shuby Complex Analog Noise Generator Module
Cat: 804375 Rel: 25 Jan 21
 
Analogue noise generator module
Notes: Complex noise generator with 2 different outputs. Out 1 produces clean square waves with sub-harmonics and tone selection, remembering the nostalgic video consoles and taking it to strange metallic vibes.

Out 2 is dedicated to the heavy chaotic metallic winds and explosions from other dimensions .

Both shares the same signal modulation path, a dedicated output mix is placed to combine both textures to create a unique complex metallic percussions.

Size: 4hp

22mm deep
Read more
MRP:$158.05 SAVE 30%
coming soon $111.26
FORTHCOMING
Patching Panda Flipanda Dual Attenuverter Module
Patching Panda Flipanda Dual Attenuverter Module (attenuator/utility synth module)
Cat: 804376 Rel: 25 Jan 21
 
Dual attenuverter module
Notes: Dual attenuverter

Sum output

Inverted output

5v or 10v constant voltage when no input is connected

Size: 3hp

Skiff friendly

Power consumption: 27mA@+12V, 29mA@-12V
Read more
MRP:$122.63 SAVE 17%
coming soon $102.17
FORTHCOMING
Patching Panda Petit Mix Compact Mixer Module
Cat: 804377 Rel: 25 Jan 21
 
Compact mixer module
Notes: The Petit Mix is a 3hp Eurorack mixer module with 4 inputs. Each input has its own level control and all inputs are DC coupled to allow for CV mixing as well as audio. There is a bi-colour led on the Frontpanel to indicate signal polarity for active channels.

3hp Mixer Module

DC coupled

4 inputs

Low noise

Bi-colour led showing positive (green) and negative (red) voltages

Power consumption 7mA@+12V, 8mA@-12V

Skiff friendly
Read more
MRP:$122.63 SAVE 17%
coming soon $102.17
FORTHCOMING
Gamechanger Audio Plasma High Voltage Distortion Pedal
Cat: 807411 Rel: 15 Feb 21
 
Distortion pedal
Notes: The PLASMA PEDAL is a revolutionary approach within the realm of overdrive and distortion, as it is a new and previously unexplored method of achieving signal clipping. Instead of using LED circuits, transistors or vacuum tubes to produce overdrive, the PLASMA PEDAL transforms your instrument's live signal into a series of continuous high-voltage discharges within a xenon-filled tube.

In essence- you are playing a bolt of electricity, and the electrical discharges produced by your instrument are instantly converted back into an analog audio signal, producing a quick, responsive, and extremely heavy distortion with TONS of unique character!

By maxing out the BLEND knob you can achieve a fully wet signal, produced only by the gas-discharge tube. This means that as soon as you stop playing, the electrical discharge within the gas-filled tube is interrupted, and the pedal will not produce any output signal at all. This feature allows you to achieve extreme contrasts between individual notes, by eliminating all of the in-between noises created by the instrument's pick-ups or by humming strings.

Thanks to this, PLASMA PEDAL is extremely well suited for playing heavy riffs or sharp staccato solos. Really - there's nothing like it!

PLASMA PEDAL converts your instrument's signal into a rapid series of electric discharges, which results in a large amount of non-linear harmonic saturation that causes extremely rich and responsive attacks, and brings out screechingly sharp overtones and harmonics.
These harmonic artifacts, produced as a byproduct of the high-voltage discharge are uncommon in traditional signal amplification, and therefore PLASMA Pedal's distortion is unlike anything you have heard before.

The PLASMA PEDAL loses the original DRY input signal and creates a new signal from fluctuations in the electromagnetic field surrounding the gas-discharge tube.

This allows to bring out an extremely wide range of frequencies that are often beyond the instrument's capabilities.

PLASMA PEDAL is designed primarily for guitarists, but it is also an awesome distortion tool for all sorts of electronic beats, synths and live instrument samples.

As you max up the VOLTAGE knob, you can add satisfying amounts of electrical buzz to any sound...
Read more
MRP:$366.51 SAVE 21%
coming soon $290.66
FORTHCOMING
Gamechanger Audio/Third Man Records Plasma Coil Distortion Pedal
Cat: 807414 Rel: 15 Feb 21
 
Distortion pedal
Notes: Gamechanger Audio's Plasma pedal is truly unique; standing out within a stompbox market that's overflowing with options. Producing a gnarly, spluttery distorted tone via a series of electrical discharges that occur within its built-in xenon tube; the highly-unconventional Plasma pedal is the first (and only) commercial musical device that literally amplifies your audio signal up to 3500 Volts. There's nothing quite like it!

However, Gamechanger Audio's Plasma Coil pedal is a tweaked version of the original formula. Created in collaboration with Jack White's Third Man Records, the Plasma Coil relies on the exact same 'High Voltage Distortion' technology that the original is so admired for, but takes it to new heights.

By adding multiple octaver-style circuits and an additional effects footswitch that can be toggled as latching or momentary, the Plasma Coil gives you even more room for experimentation. You can form crazy sub/upper harmonic octave-fuzz sounds just like Jack White, or employ the effect footswitch as a volume boost for when your solos need an extra push.

Controls:

2 EQ Controls: Lets you boost or cut Low and High frequencies
Master Volume Knob: Cuts or boosts the output signal level
Voltage Knob: Adjusts the amount of electrical current sent to the Plasma Tube
Effect Knob
This allows you to select 1 of 6 different Special Effect types:

Volume Boost:

2 Subharmonic Modes (Bitcrush-style Octave Down)
1 Upper Harmonic Mode (Octafuzz-style Octave Up)
2 Mixed Modes (Upper and Lower harmonics combined)
Other
Effect Footswitch: Engages the Plasma Coil's special effect circuit
Effect Footswitch Toggle: Configure Effects Footswitch as a latching On/Off switch or as a Momentary switch
On/Off Switch: Silent footswitch
Input Jack: Mono
Plasma Tube: Xenon Gas Filling

Power Requirements:

Standard 9V DC pedal power supply with a centre negative connector, 300 mA or higher
Power supply: Not included

POWER SOURCE: PSU
VOLTAGE: 9V
TOP-MOUNTED JACKS: Yes
Read more
MRP:$434.64 SAVE 22%
coming soon $340.61
FORTHCOMING
Gamechanger Audio Plus Sustain & Sostenuto Pedal
Cat: 807404 Rel: 15 Feb 21
 
Sustain pedal
Notes: The PLUS Pedal is more than just a stomp-box - it is a vast extension of your instrument that bridges the gap between rhythm and lead parts, and lets all musicians explore completely new territories.

Besides being a powerful arrangement and compositional tool, The PLUS Pedal can also be used for creating interesting and unique sound effects that would otherwise be impossible to achieve in real-time.

Whether you are a composer, solo performer, sound designer or part of a band - the ability to instantly turn any melodic sound produced by your instrument into a layer of continuous sound will completely change the way you approach music.

Real-time audio sampling is a unique audio algorithm developed by GAMECHANGER AUDIO that lets you capture and sample tiny bits of your instrument's signal in real time and loop them into a seamless, warm and responsive sustained tone.

Unlike existing granular synthesizers and synth-pad triggers, PLUS Pedal actually runs a constant Hi-Res recording of your instrument, and once engaged, the RealTime sampling algorithm instantly creates a circular micro-loop out of the most recent audio signal produced by you.

Think of it as a smart looper that only catches the last segment of your chosen note or chord, and uses it to create a continuous sound.

The resulting layers of sustain can be practically indistinguishable from the original tone of your instrument, and you can further adjust and fine-tune the PLUS Pedal to achieve the exact type of sustain you have imagined.
Read more
MRP:$407.39 SAVE 21%
coming soon $322.45
FORTHCOMING
Transient Modules 2M Dual Three Channel Mixer Module
Cat: 804245 Rel: 25 Jan 21
 
Dual three-channel mixer
Notes: The 2M is a dual three channel mixer in 6 HP with volume controls over all the inputs as well as the final output. As its design has been specially focused on audio applications, the input potentiometers are audio-taper type while the output ones are linear. Low distortion / high quality audio operational amplifiers have been selected in order to achieve clean audio mixing, but is also DC-coupled, so it can perform CV signal mixing as well. Great for a small system, allowing for submixes or even stereo mixing.

Technical specifications:

6HP.

38 mm depth.

Consumption: +/-12V 20mA
Read more
MRP:$156.69 SAVE 17%
coming soon $129.42
FORTHCOMING
Transient Modules 4R Quad Random Voltage Generator Module
Cat: 804247 Rel: 25 Jan 21
 
Quad random voltage generator module
Notes: The 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).

Technical specifications:

2HP.

50 mm depth.

Consumption: 60mA +12V; 40mA -12V
Read more
MRP:$119.90 SAVE 20%
coming soon $95.36
FORTHCOMING
Transient Modules 1F Voltage Controlled Switch Module
Cat: 804240 Rel: 25 Jan 21
 
Voltage controlled switch module
Notes: The 1F is a voltage controlled switch, intended to be 'one friend' for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v/oct signals. More detailed info on the demo video.

Technical specifications:

4HP.

27 mm depth.

Consumption: 15mA +12V; 10mA -12V
Read more
MRP:$107.64 SAVE 17%
coming soon $89.69
FORTHCOMING
AniModule DD Dual VCA Module
AniModule DD Dual VCA Module (CV modulation / panning / VCA / dual stereo synth module)
Cat: 794391
 
Dual VCA module
Notes: A Dual VCA for Audio or CV.

Mod In 1 is Buffered, Inverted then Normalled to Mod In 2, to facilitate stereo panning and VC CrossFading without a bunch of support modules.

Don't want it? Just turn the attenuator down or plug a signal of your choosing in to the Mod In 2.

Current Draw: +12V = 25mA, -12V = -22mA

8HP, 28mm Deep
Read more
MRP:$209.83 SAVE 17%
coming soon $174.85
FORTHCOMING
AniModule MixMan Module
AniModule MixMan Module (attenuater / mixer/ multiple / polariser / utility synth module)
Cat: 794394
 
Mixer multiple & CV manipulator module
Notes: This quintessential module, while seeming fairly utilitarian, is practically Indispensable.

At only 8HP wide and 30mm deep
You can Mix, Mult, Invert and Offset your Audio and CV.

For starters there is a 3 Channel Mixer with x3 Buffered Outs.
Then there is a dedicated Analog Inverter.
Last but not least there is an Offset Manipulator.

The Offset Manipulator is designed to take a signal and combine it with an offset.
It will work fine without a signal coming in to it though. Just take the signal from the Offset Manipulator out and dial in your desired voltage.

The Offset Manipulator Out is Normalled to the 3rd Mix In Jack Switch. If you don't want your Mixer Signals Offset, Connect a plug to the 3rd Mix In Jack First, or just dial down the 3rd attenuator to 0.

The Mixer Out is Normalled to the Inverter In Jack Switch. That way you can have an inverted version of your MixOut at the Inverter Out without using an extra patch cable
Read more
MRP:$134.89 SAVE 17%
coming soon $112.39
FORTHCOMING
AniModule LogicOgic Module
AniModule LogicOgic Module (clock modulater / frequency divider / logic synth module)
Cat: 794401
 
Logic module
Notes: This is a handy module. It's nice to have a few ORs and ANDs around when you're fiddling around with your clocks and percussives.

The Output from FlipFlop1 Q is normalled to the FlipFlop2 Input via the jack switch.

The NOT Q outs from the FlipFlops are fun to stagger your clock pulses or use as a Sub-Oscillator. The Inverter/Buffer can be sent to a Gate-Trigger converter and back to the OR to double your clock.

2 - FlipFlops (Q and NOT Q outs for each)

2 - OR Gates

2 - AND Gates

1 - Buffer/Inverter

All the outs are Buffered.

55 mA +12V
38 mm deep
O 4.00 (2 Votes) Average Rating
Read more
MRP:$268.41 SAVE 17%
coming soon $223.67
FORTHCOMING
AniModule SOB v1 Module
AniModule SOB v1 Module (state variable filter & waveshaper synth module)
Cat: 794397
 
State variable filter module
Notes:  A State Variable Filter with an adjustable WaveFolder on the input.

Self-Oscillating Filter Tracks 1V/Oct

Vactrol Input allows you to control CutOff via gates/triggers without using up an EG

Pot to mix "Clean" and "Folded" signal levels

Filter and/or Fold Audio Or Control Voltages

2 Input Signal mixer

1 Input Control Voltage Mixer

1 Input to Vactrol for CV Modulation

1V/Oct In

current Draw: +12V = 31mA -12V = 34mA
Read more
MRP:$239.80 SAVE 17%
coming soon $199.82
FORTHCOMING
AniModule ShNoiZe Module
AniModule ShNoiZe Module (noise / random / sample & hold synth module)
Cat: 794389
 
Sample & hold module
Notes: This is your classic Sample and Hold.

Signal goes in - trip the threshold on the Pulse In - and the out will "hold" the voltage at the point when you triggered it.

There is a separate White Noise circuit. It is normalled to the S+H Input for all your random needs. There is also a Noise out so you can access it independently as well.

There is a slew knob so you can smooth and lag your output to taste

Current Draw: +12V = 23mA, -12V = -12mA

4HP, 29mm Deep
Read more
MRP:$134.89 SAVE 17%
coming soon $112.39
FORTHCOMING
Dreadbox Komorebi Flanger & Chorus Pedal
Cat: 809385 Rel: 30 Apr 21
 
Chorus/flanger effects pedal
Notes: Huge chorus-flanger. Take your music to infinity. The fully analogue Dreadbox Komorebi Chorus-Flanger Pedal gives you a huge array of sound design possibilities. This powerful pedal can add some serious impact to your sound.

It doesn't matter if you're playing bass, guitar, synths, or even if you want to hook it up to your modular Eurorack system. The Komorebi is ready to go. Sprinkling its beautiful effects over anything it touches.

From a slight pinch of flange to add some movement to your bass lines, or a lengthy chorus effect to treat your pads and chords to a final touch of space-age wideness. It's a guitar pedal but not as you know. Komorebi works with everything.

Current draw: 100mA
Read more
MRP:$230.26 SAVE 17%
coming soon $191.88
FORTHCOMING
Darkglass Electronics ADAM Aggressively Distorting Advanced Machine Effects Pedal
Cat: 804018 Rel: 31 Mar 21
 
Advanced distortion pedal
Notes: The Aggressively Distorting Advanced Machine is the result of a collaboration with one of the most celebrated artists in today's metal scene - Adam "Nolly" Getgood. This pedal captures Nolly's entire tonal arsenal meticulously refined by years of in-depth testing and experience in one striking enclosure.

ADAM has three fully programmable rotating footswitch presets. Each of these stores your unique blend of compression, distortion, impulse responses, EQ parameters, and signal chain settings. Featuring a unique and innovative top-notch precision touch slider interface, for its 6-band programmable EQ.

It also incorporates a USB-C audio interface and balanced stereo outputs for studio monitors and is equipped with an extra accurate chromatic tuner, that also works well with down-tuned guitars and basses.

Compression- Controls the amount of input gain to the compressor and intelligently applies the correct amount of makeup gain so that your signal is always driven at the appropriate level, no matter how much compression is applied.

Drive- Adds distortion and drive to your signal. Crank this knob to apply Nolly's favorite vintage distortion to the distorted part of the signal chain.

Character- Changes the tone of the distortion, adding brightness to the distortion signal.

Blend- Mixes between the distortion signal and the clean sidechain signal

Level- Controls the master volume of ADAM.

Input- This is the primary instrument input on ADAM. Connect your instrument or output from your pedal board to the 1/4" mono jack.

Aux In- The stereo input of ADAM enables the playback of backing tracks while practicing or recording. Connect your mobile phone, laptop etc. to the 1/8" stereo jack.

Headphone Output- The headphone output can handle headphones with an impedance of 16 - 600 ohms. Connect your headphones to the 1/8" stereo jack and set the desired level from the dedicated potentiometer next to the jack.

Balanced Outputs- The two balanced outputs add routing versatility and the option of using ADAM as a fully equipped audio interface.

Direct Output- An XLR output with a ground lift switch provides a reliable standard connection to a mixing desk or an external audio interface for a guaranteed low-noise signal.

MIDI In- A standard 1/8" TRS jack allows connecting an external MIDI controller to ADAM for even more flexibility.

USB- The USB-C port unlocks ADAM's USB audio interface capabilities and enables interaction with the Darkglass Suite desktop app, allowing for software updates and access to the Darkglass IR library, containing hundreds of cabinet simulations.

DIMENSIONS: 18 x 12 x 6 cm

Weight: 0.7 kg
Read more
MRP:$639.01 SAVE 17%
coming soon $532.51
FORTHCOMING
AniModule TikTok Module
AniModule TikTok Module (clock modulator synth module)
Cat: 793800
 
Clock divider & multiplier module
Notes: The TikTok is a 4HP Clock Divider/Multiplier.
It has Divisions and Multiplications of:
*//2
*//3
*//4
*//5
*//6

There is a Clk Input and a Reset Input.
Both are buffered with an opamp based comparator circuit.
They are looking for approximately +1.1V on a rising edge.
This means that you are not constrained to gate (pulse) signals to trigger them.

The Reset input resets your divisions clock counter to 1

There is a switch to select Mathematical or Musical divisions.

The Multiplication Outputs 25MS Trigger pulses.
The Division Outputs are on as long as your Clock source.

Avg Current draw:
40 mA
-9 mA
Peak Current Draw:
80 mA
-17 mA

Width = 4HP
Depth = 38mm
Read more
MRP:$200.29 SAVE 17%
coming soon $166.89
FORTHCOMING
Livestock Electronics Leap ADSR & LFO Module
Livestock Electronics Leap ADSR & LFO Module (CV modulation/drum/dual & stereo/envelope generator/LFO/random synth module)
Cat: 802753
 
ADSR/LFO module
Notes: Ever need to apply DC offset or attenuation to your modulation sources?

Want to create complex modulations using an ADSR and LFO? Need a heat packing modulation source in a small package? Jump right in and feel the Leap!

Leap is an ADSR and LFO with built in DC offset and Attenuversion. The envelope and lfo are to be used individually, however the lfo's frequency and amplitude can be modulated internally by the adsr to create a complex modulation source or a simple drum.

The envelope stages can be modulated, with attenuversion for the cv inputs.

And the lfo responds to V/oct (+-5V) or can be synced to a clock.

Width: 10HP

Depth Back 25MM

Depth Front 25MM

Weight 133g

Power @ +12V 110mA

Power @ -12V 30mA
Read more
MRP:$238.44 SAVE 20%
coming soon $190.74
FORTHCOMING
Wampler Belle Overdrive Effects Pedal
Wampler Belle Overdrive Effects Pedal (distortion/overdrive effects pedal)
Cat: 810249 Rel: 30 Apr 21
MRP:$190.75 SAVE 17%
coming soon $158.95
FORTHCOMING
Livestock Electronics Bang Wavetable Oscillator Module
Livestock Electronics Bang Wavetable Oscillator Module (digital/noise/oscillator/waveshaper synth module)
Cat: 802749
 
Wavetable oscillator module
Notes: Want to create your own wavetables? Generate tons of interesting lo-fi waves that excel in percussive sounds? Or just want an oscillator that can produce rich harmonic textures? This may be a Bang for your buck!

Bang is a lo-fi digital wavetable oscillator inspired by old game consoles. However it takes a totally new approach to wavetable synthesis: within a cycle it switches between socalled chunks that are indexed as odd or even numbers. Waves can be assigned to these odd or even chunks, which allows for complex waveforms. The result is aliased, rich and absolute fun!

The module comes with six libraries containing 12 waves each. And user wave libraries can even be created using the supporting application for Mac and Windows.

Width: 10HP

Depth (Back): 30MM

Depth (Front): 25MM

Weight: 133g

Max @ +12V: 75mA

Max @ -12V: 30mA
Read more
MRP:$333.81 SAVE 20%
coming soon $267.95
FORTHCOMING
Tenderfoot Electronics µcls Mini Expansion Module (for Lattice)
Cat: 805818 Rel: 01 Feb 21
 
Expander module
Notes: µcls adds the same functions to Lattice as Cells, minus the keypad, and with the addition of an attenuator dial for the envelope/CV input, all nicely packaged in a 4HP module!

- Gate Output.

- Forward / Reverse mode trigger input.

- Random step selection trigger input.

- Envelope / CV input for Lattice step selection.

- Attenuator to finetune the effect of the envelope / cv input (with LED indicator).

- Tactile pushbutton for forward / reverse mode selection.
Read more
MRP:$148.51 SAVE 24%
coming soon $113.54
Items 201 to 250 of 257 on page 5 of 6
«  1  2  3  4  5  6  »

Filter

Coming Soon: Studio Equipment
Close