100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Home  Coming Soon  

Studio Equipment

Options
Items 101 to 150 of 345 on page 3 of 7
«  1  2  3  4  5  6  7  »
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (blue)
Cat: 785475 Rel: 22 Oct 20
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$31.04 SAVE 17%
coming soon $25.86
FORTHCOMING
SynthRotek ADSR Envelope Generator Module (black faceplate) (fully assembled)
Cat: 778161
 
ADSR envelope generator module
Notes: The Synthrotek ADSR is a small and simple envelope generator with some very useful features. CV is additive for overall length of ADR stages in ADSR mode and add even more length to just the Release stage by adding CV into the Release jack. AR mode allows for snappy to long dynamic rhythm lengths. Very short minimum lengths, self cycling and a maximum output of 5 volts makes this tiny (4HP) envelope a very feature packed and versatile module.

Read more
MRP:$155.21 SAVE 19%
coming soon $126.09
FORTHCOMING
Sound Study Modular Kontact MIC Module (fully assembled)
Notes: The Kontact MIC is a lo-fi theme park. It's a Eurorack microphone preamp with a piezo contact mic built into the panel.

The creative applications are endless: finger percussion/rubbing/scratching, guitar input (works surprisingly well with just a little lofi crunch), acoustic sources to CV, etc.

The PCB fibreglass has quite a nice rough texture - rubbing it with a finger or a plectrum creates quite a wide range of sounds. The back of the panel is plated to expand the surface area of the contact mic. The mic will also pick up all the physical sounds in your modular- patching, cables rustling, switches, fingers on knobs - without picking up airborne sounds i.e. the sound your modular is making. At very high sound levels will pick up vibrations from the speaker output and start to feedback.

The module will work with both DIYed contact mics made from inexpensive piezo transducers, off the shelf contact mics (often called Piezo Pickups) made for guitars and violins which you can pick up for ten bucks from Amazon or eBay or more bespoke mics like the popular Jez Riley French models (including hydrophones!) which are firmly aimed at Sound Designers.

It is an easy way to bring environmental noise and feedback into a modular system, inspired by the early days of electroacoustic music in Paris and Cologne, and by the contact microphone and phonograph cartridge experiments of John Cage, Gordon Mumma, Robert Ashley and Nicholas Collins.

Read more
MRP:$54.32
coming soon $51.72
FORTHCOMING
SynthRotek Atari Punk Console Eurorack Module (black faceplate) (fully assembled)
Notes: Here is the Atari Punk Console in Eurorack form! Originally designed by DIY electronics guru Forrest Mims III as the iStepped Tone Generator, the Atari Punk Console is one of the most famous and recognizable Lo-Fi synth circuits ever. Using a single 556 dual timer IC with minimal part count, the Atari Punk Console circuit is a solid, time-tested noise generator capable of outrageous square wave madness!

Control Voltage (CV) input allows step sequencers and waveform generators to expand the sonic capabilities of the Atari Punk Console from drone to arpeggio-like dynamism. Use any variable voltage source from 0-Supply Voltage for some glitchy goodness! The APC modular version has two CV inputs that modulate the two square wave internal oscillators.
Read more
MRP:$80.19 SAVE 18%
coming soon $65.74
FORTHCOMING
SynthRotek Nano West System
SynthRotek Nano West System (modular synthesiser system)
Cat: 778520
 
modular synthesiser
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via our USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

The Nano West system is a fantastic west coast style sidecar to your Mother 32, keyboard based synth, DAW or other workstation. If you want to add the beauty of a true analog modular with the rhythmic possibilities of our Dual Low Pass Gate, then look no further. The Nano West's ADSR envelope can produce large self cycling swells or icy pinging beats and bongos. As a full mono voice, you can also control this with the Arturia KeyStep, etc. Add another voice to your Mother 32!

Modules:
VCO - Voltage Controlled Oscillator
LPG - Dual Low Pass Gate
ADSR - Envelope
RND - Random
DLY - Delay
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$776.04 SAVE 20%
coming soon $624.05
FORTHCOMING
SynthRotek MIX Mixer Module (black faceplate) (fully assembled)
Notes: This simple passive mixer is suitable for mixing both audio and control voltage sources. Three channel inputs mix down to one output.

It is not suitable for additive voltage applications. All the jacks are switched to ground to minimize external interference when not patched. This can lead to unwanted attenuation of the output signal unless you plug a dummy cable into the unused channel(s) or, even easier, you can turn the channel's pot completely CCW.

Specifications:
Width: 2HP
Power consumption: none
Module screws included
Read more
MRP:$31.04 SAVE 14%
coming soon $26.68
FORTHCOMING
SynthRotek Cosmic ECHO Delay Pedal (fully assembled)
Cat: 778344
 
delay pedal
Notes: The Cosmic ECHO is an analog-sounding lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This new take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Read more
coming soon $101.31
FORTHCOMING
SynthRotek Cosmic ECHO Squared Analogue Delay Pedal (fully assembled)
Notes: The Cosmic ECHO Squared is an analog lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Blast and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

This big sister of the Cosmic ECHO is tailored to live guitar and keyboard performers. It has all the features of the original plus:

- Expression pedal input over Rate

- Blast and Warp are now momentary stomp switches

- Blast amount knob now accessible externally
Read more
MRP:$210.82 SAVE 19%
coming soon $171.36
FORTHCOMING
Old Blood Noise Visitor Parallel Multi-Modulator Pedal
Cat: 782184 Rel: 24 Sep 20
 
Multi-modulator pedal
Notes: Inspired by the unique complexities of running modulations in parallel, Old Blood Noise Endeavors unveils the Visitor Parallel Multi-Modulator. With three different primary modulation options (tremolo, chorus, and phaser) and two parallel secondary modulation options (tremolo and chorus), Visitor immediately inspires new sounds in a single pedal format. Further strangeness occurs with the delay offset of the secondary modulation and the interaction of the secondary rate and the primary depth.
Read more
MRP:$244.45 SAVE 17%
coming soon $203.71
FORTHCOMING
Old Blood Noise MAW Microphone Effects Manipulator Vocal Pedal
Cat: 782148 Rel: 24 Sep 20
 
Vocal manipulator pedal
Notes: What began as a simple request for a vocal version of an Old Blood effect spiraled into a multi-function device with 10 new effects, versatile in/out and send/return sections oriented toward any instrument you want to throw at it, and ample control over all elements. It's the new multi-tool for effects lovers on stage and in studio.
Read more
MRP:$322.06 SAVE 17%
coming soon $268.38
FORTHCOMING
Old Blood Noise Minim Reverse Modulated Delay/Reverb Pedal
Cat: 782151 Rel: 24 Sep 20
 
Delay/reverb pedal
Notes: Looking back on an inspiring year of collaboration with Datachoir, Old Blood Noise Endeavors created Minim, a new pedal built from the foundation laid out by Rever. Inside is a newly voiced reverb with harmonic tremolo, a modulated delay with nearly infinite repeats available, and a reverse section selectable between normal speed or double speed. Sat next to the Rever, it's like a long lost sibling. Put both on your board and see how well they get along.
Read more
MRP:$283.25 SAVE 17%
coming soon $236.05
FORTHCOMING
Eurorack Hardware Modules RING Dual Ring Modulator (black faceplate) (fully assembled)
Notes: RING is a 4HP dual passive ring modulator for Eurorack. Ring modulation is an essential 'effect' in modular synthesis. You get two independent channels of the classic two-transformer, four-germanium analog design. Matte black panel with white ink.
Read more
MRP:$86.66 SAVE 19%
coming soon $70.05
FORTHCOMING
SynthRotek Arcadian Rhythms Module (black faceplate, blue buttons) (fully assembled)
Notes: Arcadian Rhythms is an arcade button module that can be used to trigger drums, envelopes and other events in a Eurorack system. When the buttons are pressed, they light up and send a gate. As long as a button is held down, the gate remains high.

Mix and match your LED buttons! The brightness between colors will vary slightly, but the trimmers on the back of the module will adjust the LED brightness so the three buttons match. Reducing the brightness will also reduce the current draw (each button draws 41mA at full brightness).

Choose red, blue, green, yellow or white buttons.

Specifications:
Module width: 35mm
Module depth: 6HP
Current draw: +12V: 123mA max (41mA per button)
Read more
MRP:$68.55 SAVE 18%
coming soon $56.04
FORTHCOMING
Decksaver Behringer MS-1 Synthesiser Cover
Cat: 791939 Rel: 31 Dec 20
MRP:$59.50 SAVE 29%
coming soon $42.02
FORTHCOMING
Decksaver Behringer RD-8 Drum Machine Cover
Cat: 791946 Rel: 31 Dec 20
MRP:$59.50 SAVE 29%
coming soon $42.02
FORTHCOMING
Decksaver Behringer TD-3 Bass Line Synthesiser Cover
Cat: 791947 Rel: 31 Dec 20
MRP:$41.39 SAVE 28%
coming soon $29.64
FORTHCOMING
Decksaver Arturia Minibrute 2S Synthesiser Cover
Cat: 791932 Rel: 31 Dec 20
MRP:$59.50 SAVE 29%
coming soon $42.02
FORTHCOMING
Decksaver Arturia Microfreak Synthesiser Cover
Cat: 791934 Rel: 31 Dec 20
MRP:$38.80 SAVE 24%
coming soon $29.64
FORTHCOMING
Doepfer A-118-2V Noise & Random Slim Line Vintage Edition Module
Cat: 790467 Rel: 31 Dec 20
 
Signal generator module
Notes: Module A-118-2 generates the signals white noise, colored noise, continuous random voltage and stepped random voltage.

The noise signal is generated 100% analog by amplification of the noise of a transistor. White and colored noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red and Blue noise (low/high frequency component) in the colored noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal is sampled at the rising edge of the Clock signal. For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. Dual color LEDs are used to indicates the continuous and stepped random voltages.

Controls:
Blue: share of the high frequencies in the the colored noise output
Red: share of the low frequencies in the the colored noise output
Rate: rate of change of the continuous random voltage
Level: amplitude of the continuous random voltage
TH/SH: switches between T&H und S&H

Inputs and outputs:
RND: continuous random voltage output (with LED display)
TH/SH: stepped random voltage output (with LED display)
Clk: Clock input of the S&H/T&H unit
C Noise: colored noise output
W Noise: white noise output

Important notes:
After power on it takes a few minutes until the two noise signals and the random signals are generated. The module is not faulty when after power on the signals do not appear immediately!

The S&H/T&H function is realized by pure analog circuitry (electronic switch followed by a holding capacitor and buffer). Consequently the output voltage drifts a bit in the holding state because the capacitor is discharged by parasitic resistors. The drift depends also upon environmental conditions like humidity or temperature.

The level of the random voltage changes with the settings of the Blue and Red controls. Especially the Red control affects the random voltage level (which is derived by low pass filtering from the colored noise signal) because the Red control changes the share of the low frequencies in the colored noise signal. The effect of the Blue control is much smaller because it changes the share of the high frequencies in the colored noise signal which are filtered out by the low pass of the random circuitry.

Power consumption: 20mA at +12V and 20mA at -12V
Depth: 40mm
HP : 4
Read more
MRP:$103.47 SAVE 17%
coming soon $86.22
FORTHCOMING
Doepfer A-135-2V Voltage Controlled Mixer Vintage Edition Module
Cat: 790453 Rel: 31 Dec 20
 
Voltage controlled mixer module
Notes: A-135-2 is a miniature version of the A-135-1. Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available.

Controls, In/Outputs and Functions of each VCA:

Level (manual control of the VCA amplification), small rubberized knob (L1...L4)

Control voltage input with associated attenuator (CV1...CV4), for the full VCA control range about 0...+5V control voltage are required (attenuator fully clockwise), for higher control voltages the attenuator is used, the attenuators are without knobs, just plastic shafts with white marker

Signal Input

Signal Output

All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. to control the level of LFOs or envelopes)

The signal input is not equipped with an attenuator. But the VCAs can process all signals up to 15Vpp / -7.5...+7.5V without clipping. In case of higher levels an external attenuator is required (e.g. A-183-1).

The available amplification range is 0...1, the maximal amplification is 1 (i.e. it "clips" and remains at 1 even if the control voltage goes beyond the value that corresponds to amplification 1)

Functions of the voltage controlled mixers:

two outputs ("Selected" and "All")

Selected output: the ouput if a VCA is removed from this sum signal when a plug is inserted into the corresponding VCA output.

All output: sum of all VCA outputs, regardless of inserted plugs into the VCA outputs

The maximal amplification is about 0.6 to avoid clipping at the mixer outputs (otherwise the outputs may distort with 15Vpp signals at each signal input and full amplifications)

Special functions of the voltage controlled mixer (selectable by internal jumpers)

Dual Stereo VCA: In this case the control unit of VCA1 (L1 + CV1) affects also VCA3 and the control unit of VCA2 (L2 + CV2) affects also VCA4. The control units of VCA3 (L3 + CV3) and VCA4 (L4 +CV4) are out of operation.

Quad VCA: In this case the control unit of VCA1 (L1 + CV1) affects all four VCAs. The control units of VCA2, VCA3 and VCA4 are out of operation. In this mode the module has the same function as module A-132-2. That's why module A-132-2 will be discontinued.

Normalling of the signal inputs: by means of internal jumpers signal input 1 can be normalled to signal input 2, signal input 2 to signal input 3 and signal input 3 to signal input In 4. That way the same input signal can be distributed to four different channels by means of control voltages (e.g. quadrophonic distribution of audio signals). Suitable control voltage sources are e.g. A-144 (Morphing Controller) or A-143-9 (Quadrature LFO).

Additional technical specification for each VCA (based on the specifications of the VCA circuits CEM3360/AS3360 used in the module):

Crosstalk between VCAs: typ. - 80dB

Signal attenuation at 0V CV: typ. -70dB

Total harmonic distortion: typ. 1%

Control voltage feedthrough: max. 15mV

Width: 8 HP / 40.3 mm
Depth: 45 mm (measured from the rear side of the front panel)
Current: +40mA (+12V) / -40mA (-12V)

Read more
MRP:$150.03 SAVE 17%
coming soon $125.02
FORTHCOMING
Behringer MIC2200 v2 Vacuum Tube Mic & Line Preamplifier
Cat: 780469
 
tube microphone/line preamplifier
Notes: Tubes can really warm up a signal fast, giving it increased depth and character. Though transistors have succeeded the technology, many musicians agree that tubes deliver a far superior sound. A true audiophile 2-channel Mic/Line preamplifier, the ULTRA GAIN PRO MIC2200's hand selected 12AX7 vacuum tube gives everything from microphones to acoustic or bass guitars that vintage tube vibe in a dependable and highly-affordable package. The onboard fully parametric EQs provide unparalleled tonal characteristics, allowing you to sculpt instrument and vocal sounds with the ultimate precision and musicality.

The MIC 2200 is perfect for studio and live applications. The balanced 1/4" TRS and gold-plated XLR inputs and outputs give you maximum flexibility in either scenario. It derives its personality from a hand-selected 12AX7 tube for superior tube character and low-noise operation. The MIC 2200 is ideally suited for use with standard digital recorders and sound cards, imbuing signals with the warmth, presence and classic tube-compression that will bring your digital tracks to life.

The incredible MIC2200's controls consist of: switches for +48 V phantom power, Phase Reverse, Lo Cut, EQ Frequency Range and EQ In/Out; plus Mic Gain, Lo Cut Frequency Octave Bandwidth, Level and Output knobs. A 12-segment LED meter provides accurate monitoring of output levels. And when used as a high-end DI (Direct Injection) box in the studio or on the stage, the MIC2200 delivers flawless performance and outstanding signal integrity. For further tone conditioning, the MIC2200 features a fully parametric EQ with adjustable center Frequency, Bandwidth and Level per channel. Both channels also feature independent phase reverse switches for maximum versatility.

The ULTRAGAIN PRO MIC2200 gives you the sound quality of a 2-channel vintage tube preamp and high-end DI box all-in-one - at a mere fraction of what a true relic of the 1960s would cost.
Read more
coming soon $128.25
FORTHCOMING
Behringer DI4000 V2 4-Channel Active DI Box
Cat: 780466
 
4-channel direct input box
Notes: The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and 14" TRS), a balanced XLR Output - and a 14" Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features "buffered" inputs that respect your source signal much better than passive DI boxes can - outputting optimally-balanced, extremely low-impedance (600 O) signals that are far less susceptible to noise and RF Interference (RFI).

The DI4000 does much more than just "bass guitar in, mic-level signal out". It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you'd like to connect your guitar amp's speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts - and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go. Of course, the DI4000 provides a Link output for easy connection to other equipment, such as your onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response - and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground-lift switches eliminate ground-loop hum issues. The DI4000 does everything a standalone DI can do, and much more - times four!
Read more
coming soon TBA
FORTHCOMING
Behringer EP4000 Professional 4000 Watt Stereo Power Amplifier
Cat: 781355
 
stereo power amplifier
Notes: The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP4000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP4000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.
Read more
coming soon $341.66
FORTHCOMING
QTX Studio Monitor Speaker Stands (50cm, pair)
QTX
Cat: 785757 Rel: 31 Dec 20
 
Stands for QTX Studio Monitor Speakers
Notes: Studio Monitor Stands - 2pcs

A pair of stylish monitor stands ideal for studio, home or small projects. Supplied with floor spikes to increase stability providing a sturdy stand for monitor speakers.

The box for this item contains :

2 x Studio Monitor Stands
8 x Floor Spikes
1 x Hex Key
Pack of M6x25 fixing screws
Read more
coming soon $30.99
FORTHCOMING
Reloop sPodcaster Go Professional USB Podcast Microphone
Cat: 783826 Rel: 31 Dec 20
 
USB podcast microphone
Notes: Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the successful sPodcaster series in an outstanding retro design and is built in a portable and slim aluminium housing.

Both the dubbing of musical instruments and the recording of speech and vocals, whether on the road or in project studios, are recorded in studio quality with high-quality A/D converters, thanks to the integrated audio interface (class compliant). Thanks to the advantageous cardioid polar pattern, the system is directed towards a sound source, so that ambient noise and feedback are largely cancelled out.

The 3.5 mm jack connector on the back panel allows you to connect headphones or speakers to listen instantly to the recording. All of the computer's audio output is thus played back via the sPodcaster Go's audio interface and can be comfortably adjusted using the volume buttons. A USB connection between PC or Mac is plug 'n' play without any additional driver installation and also supplies the microphone with power.

The tabletop stand, pre-mounted on the underside of the microphone, folds completely to transport the sPodcaster Go in a space-saving manner. Alternatively, the table stand can be unscrewed to allow attachment to a conventional stand with M10 threads. The sPodcaster Go's rugged construction makes it well-prepared for the daily challenges of mobile use.

The Reloop sPodcaster Go includes a matching USB cable and a functional carrying bag.

Professional USB condenser microphone for portable podcasting
Perfect for recording on the go and smaller studio environments
Integrated USB audio interface (class compliant)

Technical Data
Voltage: USB feed, 5.0 V
Sensibility: -65 i5 dB @ 1 kHz
S/N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Plug&Play compatible with Windows Vista, XP, 8 and Mac OS X
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 350 g
Incl. USB cord, table stand and software
Read more
MRP:$71.14 SAVE 17%
coming soon $59.28
FORTHCOMING
Rode DC-USB1 Power Cable For Rodecaster Pro Podcast Production Console
Cat: 781267
 
Power cable
Notes: The DC-USB1 is a power cable that allows the RODECaster Pro to be powered from any compatible USB output, making it entirely portable. It features a locking connector for added security. A high-power (2.4A minimum) USB output is required for operation.

*USB device/power bank not included.

Power Requirements:
5V/2.4A (USB)

12V/1A (DC)
Read more
MRP:$32.34 SAVE 17%
coming soon $26.94
FORTHCOMING
Tangible Waves AE Modular 1-Row 12x1 Narrow Case
Cat: 786529 Rel: 31 Oct 20
 
1-row 12x1 narrow case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
Read more
MRP:$32.34 SAVE 17%
coming soon $26.94
FORTHCOMING
Tangible Waves AE Modular 2-Row 16x2 Standard Case
Cat: 786514 Rel: 31 Oct 20
 
2-row 16x2 wide case
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$49.15 SAVE 17%
coming soon $40.95
FORTHCOMING
Tangible Waves AE Modular 2-Row 20x2 Wide Case
Cat: 786515 Rel: 31 Oct 20
 
2-row 20x2 wide case
Notes: The 2-row rack for AE modular is 20 units wide with 2 rows; the MASTER module consumes 2 units so you have 38U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 51.5 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$56.91 SAVE 17%
coming soon $47.42
FORTHCOMING
Nektar Impact GXP61 USB MIDI Controller Keyboard
Nektar Impact GXP61 USB MIDI Controller Keyboard (USB MIDI controller keyboard)
Cat: 784008 Rel: 30 Sep 20
 
MIDI controller keyboard
Notes: Nektar products are synonymous with DAW integration on Mac and Windows and the Impact GX61 is no exception. The compact design is comfortable in front of a computer and delivers powerful functionality not even found on more comprehensive controllers. When inspiration strikes, the Impact GX61 delivers the control needed to capture ideas while they are fresh. Compact. Powerful. Control.

The Impact GX61 is a dynamic and expressive instrument, tailored to composition & performance with your computer music system. The no-fuss interface is a great entry into the world of Nektar controllers.

Featuring a 61-note (5 octave) keyboard, pitch-bend wheel, modulation wheel and foot switch socket. Two multi-colored octave buttons enable shifting the keyboard range up or down -3/+4 octaves with the LED colors changing to show the exact status, Impact GX are well equipped to deliver a great workflow.

Dedicated transpose buttons allow you to shift the keyboard range up to +/- 12 semi tones. The buttons can quickly be re-purposed to change the Global MIDI Channel or send Program messages. Additionally an assignable potentiometer provides control over any MIDI parameter, by default controls mixer volume.

Nektar DAW Integration for many of the most commonly used DAWs makes it easy to get going, and a pleasure to use. With Impact GX49 your controller keyboard is part of your system, giving you the creative freedom to compose, perform and play, without having to reach for your mouse constantly.

Eight buttons intended for DAW control, are at the center of the Impact GX. Essential tasks like transport activation or navigating tracks are highly repetitive and reaching for the mouse every time, can kill any seed of inspiration. Used with Nektar DAW integration, the 8 buttons extend functionality to include control over transport and a host of other important DAW functions, right from Impact GX.

The buttons can also be assigned to MIDI messages for use with any MIDI software that's not supported by Nektar DAW Integration. A primary and a secondary message can be programmed for each of 7 buttons, delivering 14 programmable options total.

Nektar DAW integration is carefully crafted to give the best experience with your Nektar hardware. It delivers the freedom to create, instead of having to reach for the mouse constantly when you are in the middle of capturing an idea.

Transport control with ability to goto and set locators, track navigation, volume control, launching windows and patch navigation is all available right from Impact GX. Check out the function overview chart below and see how the Impact GX ticks all the right boxes.

Impact GX is a MIDI controller as well as a DAW controller. If you use MIDI software that's not supported by Nektar DAW Integration, a host of options are available for you to set up MIDI control yourself.

Each of the 14 assignable MIDI buttons, the modulation wheel, foot switch and of course the big control knob, can be assigned to send out MIDI cc messages. The assignable buttons (14) can in addition be configured to send out Program message or MMC transport control. MMC (MIDI Machine Control) is often supported by DAWs that don't allow for advanced integration, so with this option Impact GX covers all the bases.

The Setup menu also enables Program messages, Bank LSB/MSB to be sent out on the fly as well as settings for selecting one of the 4 velocity curves, setting the Global MIDI Channel and assigning the transpose buttons.

As a low powered USB device, Impact GX works with all USB devices that feature a Class compliant MIDI driver. That includes all version of Windows from XP and higher, Apple OS X 10.5 and higher plus Linux (as long as a USB MIDI driver package is installed).

And if you are often on the move you can easily hook your Impact GX keyboard to an Apple iPad using the iPad's optional USB camera connection kit (optional). Of course the Impact GX is powered by the iPad so you can work away for as long as your iPad remains charged.

Bitwig 8-Track is included with every Impact LX+ so you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The 'Bitwig Essentials Package', a highly versatile handpicked selection of loops, clips and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.
Read more
MRP:$258.68 SAVE 17%
coming soon $215.56
FORTHCOMING
Flame uMGT MIDI To Gates Or Velocity Outs Module
Cat: 781487 Rel: 22 Sep 20
 
MIDI to gates/velocity outputs module
Notes: The FLAME uMGT converts 12 Midi notes (one octave) to gates or velocity outputs.
Read more
MRP:$219.88 SAVE 17%
coming soon $183.22
FORTHCOMING
LEP Leploop Bag
LEP Leploop Bag (synthesiser bag)
Cat: 770289
 
soft case
Notes: Hand made leploop soft case, with fine textile from fashion designing in Milano.

Colors and finiture may change.
Read more
coming soon TBA
FORTHCOMING
Happy Nerding FX AID XL Multiple Audio Effects Module (black faceplate)
Cat: 792162 Rel: 31 Dec 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Separate modulation inputs for all three effect parameters plus Sample Rate Reducer (SRR) input - changes internal clock. Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to SRR input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz via SRR input.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$279.37 SAVE 23%
coming soon $214.48
FORTHCOMING
Keeley Super Mod Workstation Modulation Pedal
Cat: 782464 Rel: 25 Sep 20
 
Modulation pedal
Notes: Sonically drench yourself in swirling modulated tones. Not many effects can be as provocative as a chopping tremolo, a swirling rotary, a dreamy chorus, or a crazed filter sound. Nothing compares 2 a thick flanger or deep harmonic tremolo. Nothing goes better with modulation than delay and reverb. With the Super Mod Workstation you can combine 2 effects together to create a nearly endless soundscape of tones. Add tap tempo and an expression pedal and you have all the tools at your disposal to create a mesmerizing array of sounds.

The Super Mod Workstation contains many of Keeley's finest effects. The Harmonic Tremolo in this unit is inspired by vintage brown face amps. The Keeley DynaTrem contained our first Harmonic Tremolo. Many consider this deeper and thicker sounding than the U Vibe type effect. The ADT in the Super Mod Workstation is from the 30ms Automatic Double Tracker. Last year that effect set the effect world on fire with the best complete ADT unit in a stomp box.

The Super Mod Workstation allows you to combine effects like Tremolo, Filter, Phaser, Chorus, Rotary Speaker, or Delay with other similar modulation effects, including delay or reverb! For example you can combine our famous 30ms Double Tracker sound in the ADT, with a Flanger, or an Echo, or Plate Reverb. Another example would be to use Bank 1 - Phaser sound, combined with Bank 2 - Delay. You can use the expression pedal to run delays into self oscillation feedback! You can Tap Tempo input a rate for the Harmonic Tremolo sound on Bank 1 and then use an expression pedal input for speed of the Rotary Cab sound on Bank 2. Decide it's #modulationFreeMonday? Well, you can use the Analog Delay on Bank 1 and a super wet Hall Reverb on Bank 2.

Two banks of eight legendary effects. Super Fidelity. Super Compact.

The Super Mod Workstation has Tap Tempo for Mod Bank One, and external expression control on Mod Bank Two.

Super Mod Workstation effects include:

Tremolo w/triangle to sine waveform control

Harmonic Tremolo w/presence tone control

Filter Trem w/oscillator and random control

Phaser w/feedback control

ADT w/blend control

Rotary Cabinet Sim w/treble horn control

Digital Delay

Analog Delay w/dynamic modulation

Chorus/Vibrato w/blend control

Flanger w/positive or negative feedback

Hall Reverb

Plate Reverb

Tap Tempo on Modulation Bank 1

Expression Control on Bank 2
Read more
MRP:$386.73 SAVE 17%
coming soon $322.28
FORTHCOMING
Keeley Verb O Trem Workstation Powerful Reverb & Modulation Machine Pedal
Cat: 782482 Rel: 25 Sep 20
 
Reverb/modulation pedal
Notes: The Keeley VoT reverb and tremolo combo gives players a simple and beautiful sounding way to end their pedal boards. Reverb and Tremolo often sound best at the end of your guitar rig, after effects like compression, fuzz or overdrive. The Keeley VoT Workstation gives you the famous Keeley spring and plate reverbs as well as modulated tube amp tremolos. This immaculate pairing provides you with everything you need for a small, compact pedal board.

When you go minimalist, you still consider Reverb and Tremolo.

So if you're doing a small gig with a compact board or you just want the captivating power of tremolo and reverb at the same time, the Keeley VoT Workstation is a simple and beautiful sounding solution.

The Keeley VoT Workstation is a high-end Dual DSP effect workstation. Each effect, reverb and tremolo are given their own effects engine. This allows us to create rich and ornate filtering. These are studio quality sounds we that have been crafted over the years, refined by working musicians and studio engineers.

Reverbs
Keeley knows and develops reverb spaces. Fat, juicy, sonically rich spaces. Keeley 2 Spring Reverb is the real deal. It's so good sounding, they install it in The Amp now. In fact Keeley reverb has been developed in many other brand's pedals.

There are 8 petals to this flower: 2 Spring, 3 Spring, Plate, Hall, Chamber, Room, Fugue, and Slapback!

Each Keeley VoT Workstation reverb allows you to control:

Level - Output Volume Level for the reverb channel

Decay - this is the length of the reverb trails, the size of the ambient space. External Expression Control port on rear of unit.

Morph - Pre-Delay - The earliest reflections, sometimes heard as a slapback. This is great for setting up a reverb space that sounds huge, or you can dial it in so that it plays well with fast, percussive notes.

Effect Level - This is your Blend Control- how loud you want the reverb in your guitar mix.

Tremolos
A Lotus Flower of Tremolos- you have eight blooming tremolos in the Keeley VoT Workstation!

8 Vintage Tremolo modes: Sine Wave, Square Wave, Harmonic, Dynamic Harmonic, Pitch Vibrato, Ramp Trem, Les'Rotary Speaker, U-Vibe

Level - Output Volume Level for the tremolo-modulation channel

Rate - Speed of modulation, with on-board Tap Tempo, external tap input jack.

Depth - amount of volume change in effect. THROB.

Morph - Controls a variety of aspects including filter points, wave shape, duty cycle, tweeter/woofer control, etc. Instruction manual lists exact details.

VoT - Lotus
The VoT Workstation Tremolo allows you to have on-board Tap Tempo or you can use an external tap switch or generator. Expression pedal control gives you foot controlled access to the Reverb Decay control. This allows you blend the perfect amount of reverb into your guitar mix.
Read more
MRP:$386.73 SAVE 17%
coming soon $322.28
FORTHCOMING
Miditech Midiface 16x16 USB MIDI Interface
Cat: 784414 Rel: 10 Oct 20
 
USB MIDI interface
Notes: 19" USB MIDI Interface with 16 x MIDI IN and 16 x MIDI OUT ports, works Class Compliant without driver with MAC OSX, Windows XP SP2, Windows Vista, Windows 7, 8 and 10.

The Midiface 16×16 is based on Ploytec's GM5 technology, which means extremely good timing and perfect Sys-Ex stability. When USB3.0 is used for the connection, MIDI flow is further prioritized. This ensures stable and reliable real-time performance for your DAW.
Read more
MRP:$341.46 SAVE 28%
coming soon $246.82
FORTHCOMING
Miditech MP-1 Sustain Pedal
Cat: 784475 Rel: 10 Oct 20
 
Sustain pedal
Notes: The MP-1 is a strong pedal, which has a long switch, and works nearly wihout own noises. Because the polarity is switchable, it is not only compatible to Miditech masterkeyboards, but also it works with all usable master- and MIDI-keyboards from all other companies with a standard sustain input jack socket.
Read more
MRP:$23.28 SAVE 17%
coming soon $19.39
FORTHCOMING
Miditech i2-Control 37 Black Edition USB MIDI Masterkeyboard
Cat: 784356 Rel: 10 Oct 20
 
USB MIDI masterkeyboard
Notes: The i2-Control 37 black edition is the big brother of the i2-Control 25 black. With additional keys, in total 37, and 9 faders it gives you more functionality. Full USB powered and class compliant, works the i2-Control 37 with each Windows and Mac OSX, which supports class compliant devices.

With an optional power adaptor the i2-Control 37 black works perfect with each MIDI device.

Class compliant: Works driverless with Mac OS/X, Apple iOS 4.2, Windows XP SP2, Windows Vista, Windows 7, Windows 8 and Windows 10

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Drummer lite, Magix Samplitude Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS and Imagelines Poizone Synthesizer
Read more
MRP:$135.81 SAVE 29%
coming soon $96.99
FORTHCOMING
Miditech i2-61 Black Edition USB MIDI Masterkeyboard
Cat: 784359 Rel: 10 Oct 20
 
USB MIDI masterkeyboard
Notes: The i2-61 offers the user 61 dynamic keys for the best price!

Class Compliant: Works without drivers on Mac OS/X, Apple iOS 4.2, Windows XP SP2, Windows Vista, Windows 7 and Windows 8

Inclusive free Miditech software bundle (download versions): Toontrack EZ Drummer lite, Magix Samplitude Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS and Imagelines Poizone Synthesizer.
Read more
MRP:$159.09 SAVE 19%
coming soon $128.27
FORTHCOMING
TC Helicon Go Guitar Portable Guitar Interface For Mobile Devices
Cat: 781363
 
Portable guitar interface
Notes: The amazing GO GUITAR is the only mobile interface you'll need to record quick, on-the-go riffs anywhere, anytime with your iOS, Android, Mac or PC mobile device. Just want to practice without the hassle of hauling around amps or blowing your roof off? Simply plug your electric or bass guitar into GO GUITAR along with your favorite pair of headphones. Jam or record literally anywhere you can fit yourself and your guitar.

Whether you're in your kitchen, relaxing in the park, or on the tour bus, GO GUITAR lets you create whenever and wherever the mood strikes. All you need is this simple guitar interface, a mobile device, and of course, your guitar!

Want to add some effects to your guitar or record the riffs you've been working on? GO GUITAR integrates seamlessly with the creative suite of TC Helicon mobile apps. When it comes to sparking your creativity, TC Helicon has you covered with an extensive array of mobile applications designed specifically for your GO GUITAR device, including effects, processing and much more - plus they are all free to download from your app store! And if that's not enough, GO GUITAR is also compatible with a wide range of apps and software from 3rd-party vendors.

Whether you want to jam in silence, or provoke noise-induced rage into your neighbors, GO GUITAR has you covered. Just connect some headphones to your GO GUITAR and hear yourself as you record or play with crystal clarity.

Yes, the word "Guitar" is in the name, but that's not GO GUITAR's only game! You can also use the line-in for your keyboard, mixer, or any other line-level audio device. GO GUITAR records high-quality recordings.

Once you've solidified that hit-making hook, feel confident that you can capture high quality audio directly to your iOS, Android, Mac, or PC device using your favorite recording DAW. GO GUITAR ensures a broad dynamic range for a distortion-free audio signal so you can rest assured that the recording you create will compete with the rest of the world.

For those times when you're crammed into an awkward space with nowhere to put your GO GUITAR, you can use the integrated clip and easily strap it onto your belt or guitar strap.



Read more
coming soon $25.60
FORTHCOMING
Empress Effects Buffer Plus Pedal
Cat: 782953 Rel: 30 Sep 20
 
I/O interface
Notes: The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.

Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+.

Input Impedance: 10k - 1Meg
Output Impedance: 510 Ohms
Frequency Response (-3dB): 5Hz - 40kHz
Power Input Voltage: 9V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: 86mA
Total Harmonic Distortion: 0.02%
Signal to Noise Ratio: 105.3dB
Headroom: +9.4dBu
Enclosure Material: Die Cast Aluminum
Input connectors: 1/4" Jack
Output connectors: 1/4" Jack
Height (enclosure): 1.25"
Height with controls: 2"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lbs
Read more
MRP:$206.94 SAVE 13%
coming soon $179.99
FORTHCOMING
Joue Water Piano Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781789 Rel: 31 Oct 20
 
Piano pad for Joue Play
Notes: Piano keyboard pad- Water colour scheme.
Read more
MRP:$45.27 SAVE 17%
coming soon $37.72
FORTHCOMING
Empress Effects Midibox2 MIDI Pedal Controller
Cat: 783064 Rel: 30 Sep 20
 
MIDI pedal controller
Notes: The Midibox2 allows you to connect Empress Pedals equipped with a control port to MIDI. It converts the standard 5 pin MIDI cable to a simple guitar patch cable.

Specifications:
Power Input Voltage: 9V DC
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: ~ 30mA
Enclosure Material: Die Cast Aluminum
Input connector: Standard 5 pin MIDI connector
Output connector: 1/4" Jack
Height: 1.25"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lb
Read more
MRP:$116.41 SAVE 17%
coming soon $96.99
FORTHCOMING
TC Electronic DVR250-DT Digital Vintage Reverb With Hardware Interface
Cat: 781359
 
Reverb controller
Notes: Digital Vintage Reverb with Inspiring Hardware Interface

Sound
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Software Support
Operating systems: Mac OS X 10.13 Sierra or above, Windows 7 or above
Drivers: No additional drivers required, uses standard USB HID drivers
Plugin formats: AAX-native, Audio Units, VST2.4, VST3. 64 bit

USB Connection (DT version)
Type: USB 2.0, type micro-B

Power (DT version)

Power supply: USB bus powered
Power consumption: Max. 2.5 W

Physical (DT version)
Dimensions (HxWxD): 52 x 109 x 133 mm (2 x 4.3 x 5.2")
Weight: 0.5 kg (1.1 lbs)
Read more
coming soon $238.19
FORTHCOMING
TC Electronic Spectracomp Bass Compressor Pedal
Cat: 781360
 
Bass compressor pedal
Notes: SPECTRACOMP BASS COMPRESSOR is the tiniest big thing to hit the world of bass in a long time. This ultra-compact and highly intuitive multiband compressor, is made to bring out all of the glorious low-end punch and presence of your beloved bass in the most transparent and musical way you've ever heard. Just turn it on and take charge of the groove.

Studio-quality multiband compressor - perfectly tuned for bass
TonePrint enabled
Ultra-small footprint

The magic of multiband bass compression was first introduced in TC's innovative RH-series bass amps, which made dialing in super-smooth compression an absolute breeze. With SPECTRACOMP BASS COMPRESSOR the simplistic one-knob approach from the amps was kept, while greatly improving the compression algorithm. This gives you access to studio-quality compression tones, in a stompbox so small that you can't afford not to have it on your board.

SPECTRACOMP BASS COMPRESSOR contains the same high-quality MD3 dynamics engine known from TC's studio production powerhouse, System 6000. A dynamics engine that has been used on countless hit-records and massive blockbuster movie productions. This advanced algorithm applies perfectly tweaked compression for your high, mid and low frequencies to create a more unified and balanced sound where your low strings never overtake your highs, something that's simply not possible with the one-size-fits-all compression known from a typical stompbox. This way you'll get a tight and punchy attack, with endless sustain all without ever compromising the natural low-end response of your bass.

Picture SPECTRACOMP BASS COMPRESSOR as an ice cream. It's smooth, delicious and easy to love. But maybe you want to super-pimp your ice cream with cherries, chocolate sauce and sprinkles shaped like unicorns? You want to make that tone-sundae your own. This is where TonePrint comes into play. Via the free editor you can customize your own compression tone through a wealth of deep editing parameters, so it suits your rig perfectly. You can also try on custom pre-made tones via the free app for Android and iOS. Tone tweaking just leveled up.
Read more
coming soon $73.28
FORTHCOMING
TC Electronic TC2290-DT Delay Plug-In With Desktop Interface
Cat: 781361
 
Delay plug-in
Notes: Legendary Dynamic Delay Plug-In with Dedicated Desktop Interface and Signature Presets.

Sound
Max. delay time: 9999 ms
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Software Support
Operating systems: Mac OS X 10.13 Sierra or above, Windows 7 or above
Drivers: No additional drivers required, uses standard USB HID drivers
Plugin formats: AAX-native, Audio Units, VST2.4, VST3. 64 bit

USB Connection (DT version)
Type: USB 2.0, type micro-B

Power (DT version)
Power supply: USB bus powered
Power consumption: Max. 2.5 W

Physical (DT version)
Dimensions (HxWxD): 43 x 109 x 135 mm (1.7 x 4.3 x 5.3")
Weight: 0.4 kg (0.88 lbs)
Read more
coming soon $190.96
FORTHCOMING
SynthRotek ECHO Voltage Controlled Echo Module (black faceplate) (fully assembled)
Cat: 778205
 
voltage controlled echo module
Notes: The ECHO (formerly known as the EKO) is a compact voltage-controlled echo/delay comes in the very tidy size of 4HP and is certain to be one of the best bangs for your buck.

A very unique echo using the PT2399 IC featuring Voltage Controlled Rate. Manual controls for Rate, Feedback, and Mix. Beautiful and bizarre, CV modulation of the rate brings in ghostly pitch bent sounds to metallic reverbs. An effects module that everyone needs in their rig.

ECHO Rate CV accepts -5 / +5 voltages (although the negative range is almost -7)

ECHO Rate knob is setup to push the chip into extreme territory and will extend past the "useable" range of the PT2399 IC, meaning that once you turn the knob past 3 o'clock or so, the chip will stop operating and you'll only hear your dry signal.

Attenuation, attenuversion, or using an offset will greatly help when running voltages into the Rate CV input. This way, you can tailor the modulation as you see fit. You will absolutely get the most out of your ECHO by using modules that attenuate, invert or offset your signal.
Read more
MRP:$124.17 SAVE 19%
coming soon $100.23
FORTHCOMING
Izotope Spire Studio Portable Digital Multitrack Recorder
Izotope Spire Studio Portable Digital Multitrack Recorder (portable digital multitrack recorder)
Cat: 784795 Rel: 15 Oct 20
 
Multitrack recorder
Notes: Quickly capture amazing audio anywhere- A liberating recording solution combining powerful hardware with an innovative mobile app. Never lose another song idea again.

Spire Studio makes it easy to record and collaborate
The creative process can be a challenge, but it doesn't have to be. In this video, discover how easy it is to get your next song idea recorded, produced, and shared with the world, all using tools as creative as you are-iZotope Spire and plug-ins.

Why Spire Studio?

Soundcheck: your personal recording engineer
Say goodbye to distorted, quiet, or muddy-sounding recordings. When a song idea strikes, there's no need to waste time manually setting recording levels and EQ. In seconds, Spire Studio's Soundcheck intelligently detects your instrument, automatically sets input levels, and sculpts its tone to sound great in the mix.

Streamline collaboration with cloud sharing
Collaborating on a song with co-writers, bandmates, or producers has never been this easy. Instantly create and send a project link, allowing anyone to preview the song, open the project in Spire, download an .MP3 or .WAV mixdown, or even download high-quality stems to work within a DAW.

iZotope's award-winning processing meets wireless recording
Add the final touch to a song with Enhance; a mastering feature born from iZotope's award-winning Ozone technology. With the touch of a button, Enhance increases clarity and boosts loudness to get the most out of a song before it's shared out to the world.

SPIRE STUDIO FEATURES
The all-in-one recording solution

1. Intuitive control
Record with simple controls if your smartphone is out of reach

2. Soundcheck
Press once, play for 10 seconds, your levels are set

3. On-board studio mic
Worry-free mic placement with a 360- omnidirectional condenser mic

4. Headphone out
1/8" output to monitor while you record

1. 4+ hour battery life
Rechargeable battery lets you capture ideas anywhere

2. Custom preamps
Pristine clarity from industry-leading Grace Design custom preamps

3. XLR & 1/4" instrument inputs
Plug in your mics and instruments to build songs with ease

4. Phantom power
48V to power your favorite condenser mics

Quickly capture amazing audio
Record anywhere with a built-in studio mic, 2 inputs, automatic Soundcheck, and 4+ hours of battery life.

Expand ideas with layers
Layer up to 8 tracks and use the Spire app to add effects, clarity, and fullness to your sound.

Mix & share anywhere
Visually mix your tracks, export to your desktop, send to friends, and publish from within the app.

Spire Studio Specs
Weight: 1.6 lbs.

Dimensions: 4.8 x 4.4 x 3.4 inches

Inputs: 2 XLR/TS combo jacks, 48v Phantom Power

Outputs: Two headphone 1/8" outputs

Sample Rate/Bit Depth: 48 kHz/24-bit

Connection Type: Built-in Wi-Fi network

Power Supply: Universal power adapter

Battery: Internal rechargeable lithium-ion

Battery Life: 4+ hours

Supported Operating System: Android, iOS

Device Requirements
The Spire Music Recorder app and Spire Studio are compatible with 64-bit iOS devices running iOS 10 or higher, including those listed below and any newer iPad/iPhone models.

iPhone 6 or higher
iPad Air
iPad Mini 2
iPad Mini 3
iPad Mini 4
iPad Air 2
iPad Pro 9.7
iPad Pro 12.9
iPad (5th gen)
iPad Pro 2 12.9
iPad Pro 10.5
The Spire Studio Controller app for Android and Spire Studio are officially tested and supported on Samsung Galaxy S series phones from the S7 and above. At this time we are unaware of issues on any devices running Android 8.0 or higher.
Read more
MRP:$347.92 SAVE 17%
coming soon $289.93
FORTHCOMING
SynthRotek 1U UniBuffer Module (black faceplate)
Cat: 777891
 
buffer/gain mixer module
Notes: The 1U UniBuffer combines a buff mult and a unity gain mixer into a 1U module. It's great for small cases where you want both functions available (like the Power Lunch).

The Buffered Multiple is a PRECISION buffered mult that is perfect for for 1V/O CV sources. The 1U Unity Gain Mixer adds input signals together and combines them for a summed output.

Current draw:
+12V: 14mA
-12V: 13mA
Module Depth: 20mm
Width: 20HP
Polarity protected
Read more
MRP:$99.59 SAVE 19%
coming soon $80.82
FORTHCOMING
SynthRotek 1U Stereo Output Mixer Module (black faceplate)
Cat: 777888
 
stereo output mixer module
Notes: The 1U Stereo Mixer is intended for pannable stereo output, but it is also suitable for both DC (Gates, Triggers and Control Voltage) & AC (audio) signals.

Specifications:
Current draw: +12: 13mA, -12: 9.2mA
Depth: 32mm
Width: 24HP
Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
Read more
MRP:$93.12 SAVE 19%
coming soon $75.44
Items 101 to 150 of 345 on page 3 of 7
«  1  2  3  4  5  6  7  »

Filter

Coming Soon: Studio Equipment
Close