Kenton

Notes: MIDI Leads: 5pin DIN to 5pin DIN. All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Notes: MIDI Leads: 5pin DIN to 5pin DIN. All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Notes: MIDI Leads: 5pin DIN to 5pin DIN. All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Notes: MIDI Leads: 5pin DIN to 5pin DIN. All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Notes: 20 metre, ready-made Cat5E cable.

Notes: 30 metre, ready-made Cat5E cable.

Notes: 50 metre, ready-made Cat5E cable.

Notes: EtherCON connectors that you can use to make your own etherCON CAT5 cables. There are two variants - one for pre-assembled CAT5 cables (with the RJ45 already on), and another to use when making your own ethernet cables.

Note: RJ45 not included.

Notes: Perfect for use with Ableton Live and Traktor, the Killamix-Mini is a compact USB controller housed in a sturdy brushed aluminium case with solid aluminium knobs. It is the perfect companion to your laptop, whether you are using a sequencer, DJ-ing or VJ-ing, just plug in the USB cable and go. Despite having only 9 knobs, 9 buttons and a joystick, the Killamix-Mini can in effect be 144 knobs,144 buttons and a joystick.

By pressing a single knob you can select any MIDI transmit channel from 1 to 9, or, with a combination of two knobs, select the remaining channels 10 to 16. When you select a new MIDI channel, the current values of the knobs for that channel are stored so that they can be restored when you next select this channel, thus avoiding any parameter jump difficulties typical of units with traditional knobs and faders.

When the values are restored, the LED rings around the knobs indicate their new positions.

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).

- 8 opto-isolated MIDI Ins
- 2 MIDI Outs

Comes with mult-regional power supply

Notes: - CV & Gate inputs on 3.5mm mono jack sockets
- A to D conversion for main CV input is 16 bit high quality ADC
- V/octave, Hz/V or 1.2V/oct modes selectable
- Gate type can be selected as Gate or S-trig
- Aux1 & 2 inputs on 3.5mm mono jack (continuously variable or switch selectable)
- Auxes can select controller number
- Auto tune feature makes setup easy
- MIDI Out on 5 pin DIN socket
- Non-volatile memory EEPROM (no back-up battery required)
- 32 bit ARM processor

Comes with multi-regional power supply

Notes: The PRO-SOLO Mk3 converts MIDI data into CV- gate and clock signals. The operation is easy and clear, settings can be saved in non-volatile memory. High-resolution 16-Bit converters provide accurate tracking and fast response. 1V/oct and Hz/V characteristics are possible as well as normal gate and Switched Trigger (S-Trig).

The unit features two CV- and one gate output, additionally there's an analogue clock output. MIDI thru socket can also be used as DIN-Sync output or it can output two additional voltages with a special cable. MIDI synched LFO.

Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-regional power supply

Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.