Back catalogue: Studio Equipment

Notes: The 0HP Butt0n from Mystic Circuits is a deceptively useful yet simple entry into the 0HP modular line. Two buttons that work in tandem to create a variety of switching behaviours. Use either the latching or momentary button to activate or deactivate two connected signals. Some clever routing also allows the latching button to change the momentary button from normally open to normally closed. Similar signal paths to Mystic Circuits' 0ttenuator module allow both channels to be used separately, two signals to be mixed together or one signal to be sent to two destinations.

Notes: Dont let the name fool you, this module is quite a bit more than just an envelope. ePatch in a gate and your output will behave as a normal sustain- release envelope, staying high while the gate is high and slowly decaying once it goes low. Patch in audio and you have an envelope follower, extracting amplitude data from whatever signal is coming in. Patch in any positive control voltage and you have a slew, adding glide whenever the incoming voltage falls. All three modes boast voltage control over the release/ response time and can use the on board input mult to either daisy chain multiple envelopes or to extract amplitude data from an audio input and then send the audio somewhere else. Possibly Mystic Circuits' most useful 0HP module yet.

Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.

Notes: An audio filter in a tiny package! A blend between Mystic Circuits' "AND - gate" and their "Vactrol Low Pass Gate" circuits, the cutoff frequency can be modulated at audio rate. It also features a voltage controlled clipping circuit which allows for further wave shaping. The response of this circuit is much faster than that of the Vactrol Low Pass Gate, so it will react to very plucky envelopes and even triggers.

Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.

Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.

Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 30 cm / 11.75"
Pack size: single

Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.

Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack

Notes: You can now update your Bitbox mk1 or mk2 with a black faceplate. Now you can have an all black rack and have digital sampling capabilities. This is just the faceplate.

Give your module a facelift

These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.

Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:

Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.

Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox

Notes: Innovative little sampler groovebox. Works as a standalone unit or as a sequencer for other gear. A nice left-field alternative to the usual MPCs and Electribes.

Supplier's notes:
Blackbox is a portable sampler and groovebox that lets you record, save/load, apply effects and edit one-shot samples and beat-sliced loops. Create sequences with samples by tapping on pads, playing a virtual keyboard, using external MIDI controllers or by drawing-in notes using a standard Piano Roll editor on a fast touchscreen interface. Sequences can be played back to create song sections and entire compositions. Finish your song by mixing it, adding stereo effects and by saving it as a Preset for fast and easy recall.

Perform songs live and trigger samples on the fly. Blackbox makes it easy to create and perform music anywhere thanks to its compact and rock-solid hardware design. Just throw it in a backpack and hit the club.

Record hours of song ideas, jam sessions, and performances thanks to a microSD slot that enables you to expand internal memory.

Blackbox comes with gigabytes of premium samples and loops by SoundTrack Loops and Loopmasters to let you start making beats right out of the box.

Blackbox - your own personal sampler.

What Is Included:

- Blackbox compact sampling studio
- MicroSD card with blackbox firmware, about 60 presets and approximately 900 WAV files
- USB power cable and USB wall wart with 3 international adapters
- 2 MIDI Adapters - Male 3.5mm TRS to Female 5 pin DIN, MIDI Class B standard
- Quick Start guide to get you playing right away

Notes: A digital mixer at heart but so much more. 1010's unique take on mixing and recording includes built-in effects and EQ, compression, headphone/monitor mixes and output routing. Clever stuff.

Supplier's Notes:
Bluebox is the portable digital audio mixer that lets you get the most out of your electronic music gear. Connect your eurorack, sampler, drum machine and synthesizer outputs to 6 stereo, 3.5 mm TRS inputs and map them to 12 mono tracks or 6 stereo tracks, all with independent control for recording and playback. It's that keyboard mixer with live performance features that you always hoped someone would make.

Connect the output of your electronic music gear to Bluebox, and then route each track independently to the three outputs and effects sends. Each track offers control of volume, gain, 4 band parametric EQ, pan, mute and solo functions. Apply high-quality global reverb and delay effects along with 4 band EQ per track to add new depth to your sound with total control to quickly tweak incoming audio or track playback as needed.

With Bluebox you can record independent tracks or the Main mix using a standard microSD card. Capture your jam session for later review, or record the ultimate mix of the tracks for your song.

Bluebox's compact 5.5h x 5h x 2h case lets you tuck it into a crowded tabletop studio or throw it in your pack for the next gig.

Interact with the dynamic visual interface on the 3.5h touchscreen along with physical knobs, navigation buttons and transport buttons to quickly access the most important functions. MIDI input and output allow you to sync the clock with external gear for synchronized effects and metronome.

Add Some Colour to Your Mix:
Mix 12 mono/6 stereo tracks of live or prerecorded sound.
Independently route each track to any combination of three stereo TRS outputs:

Stereo Output 1 - Main mix
Stereo Output 2 - Assignable, with dedicated sub-mixer (pre or post fader)
Stereo Output 3 - Headphone output, with dedicated sub-mixer (pre or post fader)
Control one parameter for multiple tracks at once in Mixer mode.
Focus on one track at a time in Track mode.
Adjust the level or mute state of each output independently.
Use touch gestures or knobs to tweak your sound with four band EQ per track with support for Low Cut/Low Shelf, Parametric, and High Shelf/High Cut settings for each band.
Apply high-quality Reverb and Delay effects with independent effects sends for each track.
Override the headphone output with the Main mix on demand.
Maximize the loudness and unify your mix with the built-in global compressor
Sync to external clocks through the MIDI Input and Output.
Record hours of music as 48k, 24 bit WAVs directly to the microSD card as multi-track or as the main stereo mix.
Playback a previously recorded track while recording new ones.
Load firmware updates through the microSD card.
Mix electronic music gear such as the 1010music blackbox, eurorack modules, drum machines, samplers and synthesizers.
Save and recall Project settings including all parameters for tracks, outputs, EQ and effects.
Copyright 1010music LLC 2020 --- CONFIDENTIAL ---
Copyright 1010music LLC 2020 --- CONFIDENTIAL UNTIL 10/10/2020 ---
Fit it into a small spot on your desk and then tuck it in your pack for the next gig.

What is Included:
Bluebox digital recording mixer
A microSD card with bluebox firmware and pre-loaded project files
A USB power cable and AC adapter with 3 international adapters
2 MIDI Adapters . Male 3.5 mm TRS to Female 5 pin DIN, MIDI Class B standard
A Quick Start guide to show you the basics (full user manual available online)

Specs:
6 stereo 3.5 mm TRS inputs
12 mono tracks, 6 stereo tracks or something in between
3 independently controlled stereo 3.5 mm TRS outputs
3.5h touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
MIDI In and Out for beat syncing effects
Dimensions: 5.5 x 5 x 2 (14 cm x 13 cm x 5 cm), 1 lb (450 grams)
Durable aluminum case

Notes: This MIDI Adapter enables you to connect MIDI devices that use standard MIDI cables to the stereo minijacks used by 1010music products. The adapter has a male stereo minijack at one end, and a female 5 pin DIN MIDI connector on the other, and is 22 cm/8.5" long. It is also useful as a converter for connecting to other MIDI devices that use a different mapping of MIDI signals to the stereo minijacks.

Notes: One of 1010music's first miniature Nanobox instruments, the Lemondrop is a granular synth in a compact format. Touchscreen interface gives full hands-on control of the four-voice sound engine.

Supplier's Notes:
Freshly Squeezed Granular Synthesis

Explore a freshly squeezed approach to granular synthesis with Nanobox | Lemondrop, a polyphonic granular mini synthesizer with intuitive touchscreen control. Four voice polyphony, two granulators and an oscillator provide a wide sonic paletteifrom lush environmental pads to rugged and glitched-out textures. Instantly morph and shape sounds with the swipe of a finger using touchscreen X/Y control. Choose from hundreds of professionally designed presets and wav files, or quickly create your own patches with deep parameter control via the 2" touchscreen. Integrate lemondrop seamlessly with your existing tabletop gearior create on-the-go thanks to a compact design that fits in the palm of your hand.

What Is Included

Nanobox | Lemondrop compact polyphonic granular synthesizer with touchscreen control
MicroSD card with presets and wav files
USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs

Includes 153 presets and 311 wave files
16 grains per oscillator for a total of 128
Sample memory per oscillator 30 seconds
Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type A/B selectable
Clock Input: 4 PPQ
MIDI support: Note On/Off, Mod Wheel, Sustain, Pitch Bend, Mono & poly Aftertouch, assignable CCs, and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.

Notes: 1010's Nanobox range expands with the Razzmatazz, a tiny drum machine with FM synthesis, sampling and a built-in sequencer. Small but powerful, with built-in MIDI and touchscreen control.

Supplier's Notes:
Create the juiciest beats and tastiest rhythms with Nanobox Razzmatazz, a mini drum sequencer that combines powerful FM synthesis and sampling. Featuring advanced voice architecture, razzmatazz puts a huge range of percussive sounds at your fingertips-from deep and gritty kick drums to searing snare hits and crisp hi-hats. Perform using 8 touchscreen pads or your favorite midi controller, and craft up to 16 rhythms using an innovative visual sequencer that allows you to see all pad states and steps simultaneously. Shape the sound of each pad by combining any variation of two FM oscillators and a WAV file-plus two filters, two envelopes, a resonator, a snap generator, and three additional effects.

You can even choose from four unique types of distortion to create incredibly distinct and powerful drum sounds. Enjoy massive analogue drum sounds and an innovative feature set, all in a compact package that goes anywhere.

Technical Specs

Includes 120 presets and 112 wave files
8 pads that can support 2 FM Oscillators and WAV file each
Sample memory per WAV of 30 seconds
Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type B
Clock Input: 1,2, 4, 8, 12 or 24 PPQ selectable
MIDI support: Note On/Off, Velocity, Pressure, Mod Wheel, Aftertouch, assignable CCs, program changes and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.

What is included:

Nanobox | razzmatazz mini drum sequencer with FM synthesis and sampling
MicroSD card with presets and wav files
Color matched USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.

Notes: 4ms blank panel - 10HP width. Black coloured PCB material with 4ms logo.

Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.

Notes: 4ms blank panel - 1HP width. Black coloured PCB material with 4ms logo.

Notes: 4ms blank panel - 2HP width. Black coloured PCB material with 4ms logo.

Notes: Jumper cable for connecting two Listen 4, Listen 4Q, or Listen IO modules & for daisy-chaining multiple Listens to create a larger mixer. Also used for connecting a WAV Recorder to a Listen module in order to record directly from the Listen's main mix. See the Listen module manuals for details and examples.

One cable connects two modules. By adding more cables you can create a chain between multiple modules.

Specifications:

1x3 pin female header
Pin Spacing: 0.1" (2.54mm)
Total length: 4.38" (111mm)

Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15V/3A (45W) / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 20W output power
- Low-noise output
- Compatible with an IEC C5 cable

Please note: IEC cable not supplied

Notes: 4ms blank panel - 8HP width. Black coloured PCB material with 4ms logo.

Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15-20V / 90W / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

Compatible power bricks are available wherever ROW POWER modules are sold. You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 30W output power
- Low-noise output
- Compatible with an IEC C5 cable

Please note: IEC cable not supplied

Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.

Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.

Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

This Pod requires a power brick (not included).

Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:
34HP Pod, black anodized aluminum
Extra deep (2.16"/55mm) fits virtually every Eurorack module
Built-in power supply with four Eurorack power headers
M3 x 8mm pan-head screws, stainless steel (10)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.65A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz

Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz

Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.

Notes: Large sized spring reverb tank, Accutronics 9BB2C1B with 3×2 springs and medium decay (1.75 - 3 seconds).

Notes: Type 1 - Blue Reverb

Features:
Compact and low cost type
2 natural coil spring type
Input impedance are changeable
Length of connect wire are changeable by optional

Application:
Specially suited for small wattage amplifier
For electric organs, guitar amplifier
Ideally suited for practice amps
2 Springs Type

Notes: ***B-STOCK: Box opened, product in perfect working order***


This 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.

As of December 2020, all AE modules will be shipped with these knobs as standard.

Notes: Rack Screws - Tin of 30

These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard screw driver.

Each Special Size M2.5 X 8mm stainless steel screw comes with a black nylon washer in a silver tin.

Notes: Updated with new driver construction and recycled materials, AIAIAI's Studio model is designed for production work and mixing, featuring the same top quality modular design as the brand's other TMA-2 models.

Supplier's Notes:

Signature AIAIAI bio-diaphragm speaker tuned for clarity and detail.

Critically acclaimed sound stage specifically designed for music creation with a clear and highly detailed sound representation.

Enhanced comfort with Alcantara.

Ultra soft over-ear memory foam cushions covered with resilient, CO2 neutral, and highly comfortable Alcantarar ideal for longer sessions.

Versatile.

Trusted for music creativity in all environments - in the studio, on the road, and on stage.

Modular product design.

This TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

Headphones for life.

AIAIAI offer lifetime trade-in for your headphones or modular parts. With this program, users can leverage the modular product design to get maximum value from their purchase by swapping out used or non-functional headphones or parts for future credit. This means only investing in one pair of headphones, for life.

Signature AIAIAI sound tuned for clarity and detail
Bio-diaphragm speaker for enhanced accuracy
Enhanced comfort with Alcantarar
Responsible modular headphones - headphones for life
High quality cable

Notes: Wireless version of AIAIAI's outstanding studio headphones. Wireless+ technology allows lossless streaming with ultra-low latency. Usual stylish modular approach and quality build.

Supplier's Notes:
Empowering music creators with the freedom to create wirelessly. The TMA-2 Studio Wireless+ is a versatile professional headphone, designed for today's dynamic creative workflow. Featuring new W+ Link technology for ultra-low latency and uncompressed audio, added Bluetooth 5.0 with +80 playback, and a coiled hi-fi cable.

Wireless music creation with ultra-low latency and uncompressed audio with W+ Link technology.

Uncompressed and robust 16ms latency connection for high quality wireless audio designed for enhanced freedom and creativity.

Extended versatility with added Bluetooth for +80h playback and hi-fi coiled cable.

Seamlessly switch to Bluetooth 5.0 with +80h playback for everyday listening and inspiration, and a coiled hi-fi cable included for a traditional connection.

Signature AIAIAI bio-diaphragm speakers tuned for clarity and detail. Critically acclaimed sound stage specifically designed for music creation with a clear and highly detailed sound representation.

Enhanced comfort with Alcantarar over-ear memory foam cushions. Soft over-ear memory foam cushions covered with resilient, CO2 neutral, and highly comfortable Alcantarar, ideal for longer sessions.

Responsible modular headphones - designed to last. Upgrade and expand as technology or needs evolve to extend the functional lifetime of the product and create less waste for the planet.

Specifications

Speaker unit

Driver diameter: 40 mm.
Sensitivity: 97 dB @ 1mW.
Rated power: 40 mW.
Max power: 100 mW.
Diaphragm: Bio-cellulose.
Magnet: High grade neodymium.
Resonance freq.: 80 Hz.
Impedance: 32 Ohm

Transmitter

W+ Link audio quality: Lossless.
W+ Link latency: 16 ms.
Operating range: 12 metres.
Playback time: 30 hours.
Charging time: 3 hours.
Battery: 2700 mAh.

Headband

W+ Link audio quality: Lossless.
W+ Link operating range: 12 metres.
Bluetooth version: 5.0.
Charging time: 2 hours.
W+ Link latency: 16 ms.
W+ Link playback time: 16 hours.
Bluetooth operating range: 10 metres.
Battery: 970 mAh.
Bluetooth codecs: AAC, SBC.

Notes: APC Key 25 Mk2

The new APC Key 25 Mk2 is a versatile and compact MIDI keyboard controller that seamlessly delivers the power to perform and create anywhere, for the perfect combination of clip launching and composing in Ableton Live. Bring your original melodies, chord structures and layered harmonic ideas to life with APC Key 25.
Focus on your performance

40 brilliant RGB-backlit pads

APC Key 25 Mk2 features 40 new RGB-backlit pads for a brilliant and precise representation of your Ableton Live session clips. Whether in the studio or on stage, the scrollable RGB-enabled pad matrix will boldly shine through. In the heart of your most creative moment, launch and activate loops, instruments, vocals, and more with confidence.

Launch an immersive music-creation experience

APC Key 25 allows you to trigger individual loops, samples, and melodies or entire Scenes for the most imaginative and inspirational music creation performances. 40 RGB-backlit pads on a customizable 5x8 grid accurately reflect clips from your Ableton Live Session and are always in reach for the ultimate navigational experience, even with large sessions.

The keys to your creativity

Your melodic performance

The APC Key 25 authentically brings out your melodic ideas. Dive into Ableton's powerful instruments and express your music on your own terms. Create your own bass lines with AIR Technology's Hybrid 3, and layer dynamic piano sounds with the Mini Grand Virtual Instrument. Combined with Ableton's Scene and Clip launching workflow, APC Key 25 allows you to add original performances to your tracks.

Gen 2 keybed - performance and feel

APC Key 25 features 25 keys with the Gen 2 Dynamic Keybed for melodic and harmonic music creation. Play your own chords, arpeggios, solos, and soundscapes with the incredibly versatile keys. Use the Octave Up/Down buttons for expanded note range. The dedicated Sustain button adds space and dimension to your playing, ensuring the APC Key 25 is ready for any musical moment.

Simple controls for powerful music making

A more powerful Ableton experience

Enjoy serious hands-on control for a powerfully creative Ableton Live experience. APC Key 25 features 8 endless 360-knobs to adjust volume, pan, insert effect sends and more for smooth, intuitive control of your sessions. Tweak reverbs, sweep filters, or write automation that will bring your music to life. Shape your sounds instantly using the assignable endless 360-knob controls.

Precise intuitive control

Create your own distinct sounds with ease. With Device Mode, the APC Key 25 knobs are automatically mapped to the eight Macro Controls of Ableton Live's selected device. Control multiple parameters with one knob to generate totally innovative sounds. Get more hands-on control with Soft Keys for easy access to Solo, Mute, Stop and Record arm functions.

Ableton Live Lite and AIR technology software bundle

Launch with Ableton Live Lite

APC Key 25 includes Ableton Live Lite software. Start creating and making music with this powerful clip launching DAW packed with instruments, mixing effects, samples, and the ability to record and mix audio and MIDI. Ableton Live Lite offers all the tools to transform your musical ideas into exciting songs and performances.

Elevate your sound with AIR

Elevate your sound with the included virtual instrument pack from award-winning sound design company AIR Music Technology. In addition to Ableton Live Lite, APC Key 25 also includes multiple world-class plugin instruments including Hybrid 3 - a powerful polyphonic analogue synth, Mini Grand - an acoustic piano instrument, and Velvet - a vintage electric piano instrument.

APC KEY 25 MK2 Technical Specifications

Note Keys: 25 velocity-sensitive keys; 10-octave range with octaveup/down buttons
Clip Buttons: 40 RGB backlit clip-launch buttons in 8x5 matrix Knobs 8 360O knobswith 4 modes
Inputs / Outputs: 1 USB port
Power: USB-bus-powered
Dimensions: 12.4" x 7.6" x 1.9" 315 x 193 x 47 mm (width x depth x height)
Weight: 2.1 lbs. 0.9 kg

Notes: Compact USB bus-powered 64-button clip launcher for Ableton Live

The APC Mini Mk2 clip launching controller for Ableton Live is the ultimate compact solution for music creation in any environment. APC Mini delivers dynamic control of your Ableton Live sessions in a powerful yet efficient footprint, perfect for creative looping, remixing, and experimenting in the studio or on the stage.

Focus on your performance

64 brilliant RGB-backlit pads

APC Mini features 64 new RGB-backlit pads for a brilliant and precise representation of your Ableton Live session clips. Whether in the studio or on stage, the scrollable RGB-enabled pad matrix will boldly shine through. In the heart of your most creative moment, launch and activate loops, instruments, vocals, and more with confidence.

Launch an immersive music-creation experience

APC Mini allows you to trigger individual loops, samples, and melodies or entire Scenes for the most imaginative and inspirational music creation performances. Even with your largest projects, the 64 RGB-backlit pads across the customizable 8x8 grid accurately reflect clips from your Ableton Live Session and are always in reach for the ultimate creative experience.

Simple controls for powerful music making

A more powerful Ableton experience
Enjoy serious hands-on control for a powerfully creative Ableton Live experience. APC Mini features 9 faders to adjust volume, pan, insert effect sends and more for smooth, intuitive control of your sessions. Tweak reverbs, sweep filters, or write automation that will bring your music to life. Shape your sounds instantly using the assignable fader controls.

Precise intuitive control

Create your own distinct sounds with ease. With Device Mode, the APC Mini faders are automatically mapped to the eight Macro Controls of Ableton Live's selected device. Control multiple parameters with one fader to generate totally innovative sounds. Get more hands-on control with Soft Keys for easy access to Solo, Mute, Stop and Record arm functions.

Inspiring features to empower your creativity

Drum mode for Ableton Drum Rack

Drum Mode provides seamless integration with Ableton's Drum Rack isolating a 4x4 quadrant of the APC Mini to control Ableton, while still giving you the ability to assign the remaining pads. This allows for ultra-customized pad layouts and equally inventive and creative performances-not achievable with any other APC controller.

Real-time key and scale control

The Smart Scale View provides instant visual feedback while you change keys or scale types. In this mode, the musical key currently selected is also visible across the pads to ensure you know what scale you're in. The Notes Mode delivers a new performance workflow, allowing you to play pitch-perfect musical parts in Ableton without playing wrong notes

Ableton Live Lite and Air Technology software bundle

Launch with Ableton Live Lite

APC Mini includes Ableton Live Lite software. Start creating and making music with this powerful clip launching DAW packed with instruments, mixing effects, samples, and the ability to record and mix audio and MIDI. Ableton Live Lite offers all the tools to transform your musical ideas into exciting songs and performances.

Elevate your sound with AIR
Elevate your sound with the included virtual instrument pack from award-winning sound design company AIR Music Technology. In addition to Ableton Live Lite, APC Mini also includes multiple world-class plugin instruments including Hybrid 3 - a powerful polyphonic analog synth, Mini Grand - an acoustic piano instrument, and Velvet - a vintage electric piano instrument.

Drum Mode

Drum sample mode featuring seamless integration with Ableton Drum Rack.

Notes Mode

Melodic control of plugin instruments and sounds for inspirational performances.

Smart Scale Mode

Visual feedback of current Note Mode key across the 8x8 pad matrix.

Technical Specifications

Power: USB-bus-powered
Dimensions: 9.5" x 8.3" x 1.3" 240 x 210 x 32 mm (width x depth x height)
Weight: 1.79 lbs. | 0.81 kg

Notes: Great value for FL Studio users with this dedicated controller which channels Akai's expertise in order to offer a hands-on experience for your DAW. Quicker workflow and easier access to settings.

Supplier's Notes:
The new Akai Professional Fire represents the first of its kind, a dedicated hardware controller for the FL Studio Digital Audio Workstation (DAW) platform. Created in close partnership with Image-Line, Fire is a high-performance tool designed to enhance the workflow and music-creating experience for all FL Studio producers.

Fire features a dedicated browser function to navigate, audition and load your audio samples, recall project files and open plugins. Simply select browser and use the Select rotary encoder to preview and load content and devices within FL Studio - The graphical OLED display makes for easy browsing and controlling the various files, menus and parameters within your session a breeze.

Featuring plug-and-play integration, within seconds you'll be creating patterns and building tracks using Fire's 4 x 16 velocity-sensitive RGB pad matrix, designed for immediate interaction with FL Studio's celebrated step sequencer.

Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

From searing synth leads to lush pads, Fire's Note mode provides the ultimate platform to add melody and harmony to your production. Simply push the Note button and Fire's RGB pads switch-up to a MIDI keyboard giving you three octaves of note data, perfect for playing all of your instruments hosted in FL Studio.

Fire's pad matrix features an MPC-style 16-pad layout for seamless integration with FPC and SliceX. This is great for FL Studio producers who want a traditional beat-making experience or want to use their finger-drumming chops on the track.

Whether you're a studio producer refining an arrangement or live performer looking to take your sessions to the stage, Fire's Performance mode provides the ideal platform to remix and reimagine your tracks. Simply select Performance mode and launch MIDI clips and audio directly from Fire's RGB pad matrix for a truly inspiring live production experience.

Fire also provides immediate access to transport controls straight from the hardware. Record, Stop, Play, as well as a button to instantly switch between Pattern and Song mode are intuitively placed for mouse-free control of FL Studio. Plus, these all double up with secondary controls providing access to Loop Record, Countdown, Wait and Metronome.

Bringing a tactile, mouse-free mixing solution to the FL Studio environment, Fire includes 4 banks of 4 touch-capacitive knobs that enable the user to instantly see and adjust parameter values. Providing control over channel, mixer and user-assignable parameters, this enables a more intuitive and enjoyable workflow. From tweaking volume and pan within FL Studio's mixer to adjusting filter controls within the selected channel and recording automation, you'll spend less time clicking and more time executing.

Speed is power. Up to four Fire devices can be connected at once, enabling unprecedented hardware control over the FL Studio mixing and production workflow. Expand channels or make more in the sequencer accessible by selecting Multi-Device Mode from the OLED display. Instantly expand the 4 x16 matrix of one Fire unit to an 8 x 32 workflow.

Enter the ground-breaking, high-powered workflow heard all over the charts with the FL Studio Fruity Fire Edition software, included with Fire. FL Studio is a complete software music production environment, the culmination of more than 20 years of innovative development. The software features everything you need in one package to compose, arrange, edit, mix and master professional quality music. With access to FL Studio's piano roll editor, step sequencer, playlist, VST instrument support, full automation functionality, plus 18+ virtual instruments and over a dozen built-in effects and processors, FL Studio Fruity Fire Edition provides the ultimate platform to spark that initial idea, ignite your creativity and complete your masterpiece - all in an ultra-intuitive, inspiring environment engineered to keep you tuned in to what's important, your music.

Pads: (64) Velocity-Sensitive RGB Backlit Pads

Knobs:
4 x 360 degree Assignable Touch-Capacitive Knobs
1 x 360 Encoder for Display Navigation

Buttons: 20 x Dedicated function buttons; Red, Amber or Green backlit
Display: OLED Display
Connections: 1 USB Type-B Port

SYSTEM REQUIREMENTS
Windows 7, 8, 10 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Mac OS:
10.11 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Notes: The new Akai Professional Fire represents the first of its kind, a dedicated hardware controller for the FL Studio Digital Audio Workstation (DAW) platform. Created in close partnership with Image-Line, Fire is a high-performance tool designed to enhance the workflow and music-creating experience for all FL Studio producers.

Fire features a dedicated browser function to navigate, audition and load your audio samples, recall project files and open plugins. Simply select browser and use the Select rotary encoder to preview and load content and devices within FL Studio - The graphical OLED display makes for easy browsing and controlling the various files, menus and parameters within your session a breeze.

Featuring plug-and-play integration, within seconds you'll be creating patterns and building tracks using Fire's 4 x 16 velocity-sensitive RGB pad matrix, designed for immediate interaction with FL Studio's celebrated step sequencer. Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

From searing synth leads to lush pads, Fire's Note mode provides the ultimate platform to add melody and harmony to your production. Simply push the Note button and Fire's RGB pads switch-up to a MIDI keyboard giving you three octaves of note data, perfect for playing all of your instruments hosted in FL Studio.

Fire's pad matrix features an MPC-style 16-pad layout for seamless integration with FPC and SliceX. This is great for FL Studio producers who want a traditional beat-making experience or want to use their finger-drumming chops on the track.

Whether you're a studio producer refining an arrangement or live performer looking to take your sessions to the stage, Fire's Performance mode provides the ideal platform to remix and reimagine your tracks. Simply select Performance mode and launch MIDI clips and audio directly from Fire's RGB pad matrix for a truly inspiring live production experience.

Fire also provides immediate access to transport controls straight from the hardware. Record, Stop, Play, as well as a button to instantly switch between Pattern and Song mode are intuitively placed for mouse-free control of FL Studio. Plus, these all double up with secondary controls providing access to Loop Record, Countdown, Wait and Metronome.

Bringing a tactile, mouse-free mixing solution to the FL Studio environment, Fire includes 4 banks of 4 touch-capacitive knobs that enable the user to instantly see and adjust parameter values. Providing control over channel, mixer and user-assignable parameters, this enables a more intuitive and enjoyable workflow. From tweaking volume and pan within FL Studio's mixer to adjusting filter controls within the selected channel and recording automation, you'll spend less time clicking and more time executing.

Speed is power. Up to four Fire devices can be connected at once, enabling unprecedented hardware control over the FL Studio mixing and production workflow. Expand channels or make more in the sequencer accessible by selecting Multi-Device Mode from the OLED display. Instantly expand the 4 x16 matrix of one Fire unit to an 8 x 32 workflow.

Pads: (64) Velocity-Sensitive RGB Backlit Pads

Knobs:
4 x 360 degree Assignable Touch-Capacitive Knobs
1 x 360 Encoder for Display Navigation

Buttons: 20 x Dedicated function buttons; Red, Amber or Green backlit
Display: OLED Display
Connections: 1 USB Type-B Port

SYSTEM REQUIREMENTS
Windows:
Windows 7, 8, 10 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Mac OS:
10.11 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Notes: A standalone alternative to the clip-and-scene production workflow of software like Ableton Live. Huge production and performance potential with built-in synths, effects and sampling power.

FORCE 3.2 is the MOST POWERFUL STANDALONE music production system for studio production and live performance. Now, FORCE 3.2 delivers even more inspiring plugin FX, sounds, creative editing, arranging and vocal effects processing as well as award-winning mixing and mastering plugins from world-renowned AIR Music Tech.

MPC Plugin Instruments
New Sounds Mode
New AIR Effects
Probability & Ratcheting
Automation Snapshots | Track Reorder
FORCE Tuner

Supplier's Notes:
Introducing Force, the ultimate in standalone end-to-end production workflows, complete with every tool you need to produce, remix, mashup and perform your tracks live. Fusing clip-launching, a linear arranger, MIDI Multi capability, step sequencing, sampling, synth engines, tactile touch screen control and much more, all in a singular standalone device, Force is primed for any setting, from the studio to the mainstage - no computer needed.

Launch Clips, browse your sounds, edit MIDI data, manipulate samples, arrange your composition, apply XYFX, sculpt synth sounds and much more, all from Force's 7-inch, full-color, capacitive multi-touch display.

Find your creative flow with Force's arsenal of tactile controls. Trigger scenes/clips, step sequence, finger drum and play note data with an expandable 8x8 clip launch matrix. Discover new ways to supercharge your performance via 360-degree rotary encoders with OLED feedback for immediate real-time access to all core controls or any assignable parameter. Fast-track your workflow with Force's collection of smart controls for navigation, playback/recording control, note expression, crossfading and much more.

Load your samples from a USB thumb drive or SD card, or expand Force's storage with the SATA drive bay. Capture audio with (2) XLR/14-inch combo inputs with phantom power, switchable to line/instrument level. Route your audio to two stereo 1/4-inch outputs, selectable per track within Force's UI. Use the headphone out as a cue bus to audition clips/scenes. Take control of your modular gear with four independent CV/Gate outputs and unite your peripheral MIDI equipment courtesy of MIDI In/Out/Through ports and USB via Force's unprecedented MIDI Multi capability. Connectivity and storage restrictions are things of the past!

From sparking that initial idea to arranging and final mixdown, everything your production demands is here. Record, program and sequence with multiple track types including Plugin Tracks with MPC-style Drum Tracks, Audio Tracks, Keygroup Tracks, MIDI tracks and CV tracks. Sketch out song sections in performance mode, then arrange these on Force's linear arranger. Add the final polish to your track using dozens of processors and effects from the AIR FX suite, all controllable via smart assignments on the rotary encoders or the displays on the touch user interface.

For the DJ, Force immediately connects to your live rig either as a feature-rich side-cart or a solo centerpiece. Remix and mashup tracks on Force's 8x8 clip matrix. Import multiple stems, then time-stretch and pitch-shift your content all in real-time. Assign tracks to Force's crossfader and load full tracks, stems or loops to Force's 8x8 matrix. Add an extra dimension to your performance with tactile XYFX. Connect Force to your wireless network and sync your project with any Ableton Link compatible application or hardware device. The creative possibilities are only as limited as your imagination - adding an extra dimension to your DJ performance has never been simpler.

KEY SPECS:

Pads:
(64) velocity- and pressure-sensitive pads, RGB-backlit

Knobs:
(8) 360- touch-sensitive Knobs
(1) 360- encoder for display navigation and selection via push
(5) 270- knobs for gain, mix & level adjustment

Buttons:
(56) dedicated function buttons; red-, amber-, or green-backlit

Display:
6.9" / 176 mm (diagonal)
5.9" x 3.7" / 150 x 93 mm (width x height)
Full-color LED-backlit display with touch interface

Connections:
(2) XLR+1/4" (6.35 mm) TRS inputs (Input 1/2)
(4) 1/4" (6.35 mm) TRS outputs (2 stereo pairs)
(1) 1/4" (6.35 mm) stereo headphone output
(1) 1/8" (3.5 mm) MIDI input
(1) 1/8" (3.5 mm) MIDI output
(1) 1/8" (3.5 mm) MIDI thru port
(4) 1/8" (3.5 mm) CV/Gate outputs
(1) Ethernet link port
(2) USB Type-A ports
(1) USB Type-B port
(1) SD card slot
(1) power adapter input

Power:
Via power adapter: 19 V, 3.42 A, center-positive, included

Dimensions (width x depth x height):
13.8" x 15.3" x 2.85"
350 x 389 x 72.5 mm

Weight: 8.53 lbs./3.87 kg

Notes: Still one of the best value pad controllers on the market, Akai's trusty LPD8 offers eight MPC-style pads and eight rotary controls. Simple, effective and compatible with most hardware and software.

Supplier's Notes:
Premium pad performance

Great things come in small packages and the the LPD8 delivers in a big way. The sleek MIDI pad controller features 8 velocity-sensitive RGB pads from the flagship MPC X and is up to any pad performance-based duties for the modern beat-making music producer. Produce beats, trigger one-shot samples and loops, or connect to any general MIDI-based DAW for easy hands-on controlling and creation.

Legendary pad performance

LPD8 features the same pads from the top-of-the-line MPC X standalone hardware. The sturdy yet super responsive pads are the standard for any music maker looking for dynamic performance without compromising creativity.

Assignable knob controls

LPD8 features 8 assignable rotary knobs for precise control of parameters and values in your DAW. Adjust reverb or delay wetness, dial in parametric eq, trim loops and samples, and so much more with the accuracy you need for your music creation workflow.

Sleek compact design

LPD8 fits in wherever you need it. Sit it on your desk, neatly against your laptop computer for a streamlined process, or pack it into your producer bag with your headphones and accessories ensuring you're always ready to create anywhere.

MPC plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Controls:

(8) velocity-sensitive, RGB-lit pads
(8) 270- knobs
(4) UI buttons

Programs: 4 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 12.1" x 3.2" x 1.3" / 306 x 81 x 34 mm
Weight: 0.86 lbs./0.39 kg

Notes: Updated version of Akai's much-loved mini keyboard controller. Second-generation model gets a visual makeover plus updated keybed for improved playability. Superb value.

Supplier notes:
Mini keys, major performance

The LPK25 is the perfect companion for piano and keyboard-playing musicians everywhere. When inspiration calls, this sleek 2-octave MIDI controller makes for easy composing and creating in even the tightest spaces while still delivering an incredibly responsive experience.

A real controller for a real creation

LPK25 features the revolutionary Gen 2 Dynamic keybed which premiered on the legendary MPK mini mk3 MIDI controller. The keys offer an exquisite playing experience with careful attention to velocity response. Whether you're playing a gentle upright piano, a super synthesizer plugin, or triggering notation into your favourite composition software, LPK25 becomes a natural extension of your creativity, ensuring you won't miss a beat.

Built-in clock and arpeggiator

The onboard arpeggiator and clock make for powerful control of any destination, whether software instrument, hardware device, or USB enabled modular gear, all via a single USB cable.

Compact production partner

When not in use, LPK25 stores away quickly and neatly until your next creative session. Pack it in your everyday carry bag and keep it handy for use with your laptop, smart phone, or tablet.

MPC Plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Keyboard
25 keys, velocity-sensitive
10-octave range (127 MIDI notes)

Arpeggiator
Range: 1-4 octaves
Modes: Up, Down, Exclusive, Inclusive, Order, Random, or Latching
Time Divisions: 1/4-note, 1/4-note triplet, 1/8-note, 1/8-note triplet, 1/16-note, 1/16-note triplet, 1/32-note, or 1/32-note triplet
Tempo: 30-240 BPM via Tap Tempo button (internal sync). Based on software tempo (external sync)
Swing: 50%, 55%, 59%, 61%, or 64%
Programs: 8 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 13.7" x 4.0" x 1.5" / 348 x 102 x 38mm
Weight: 0.99 lbs. / 0.45 kg

Notes: Total Mixing Performance in a Small Package:

MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you'd like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved:

Akai Professional's portable MIDImix solves this problem completely. With Akai Professional's famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer's settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW's functionality. This is great - it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like It:

Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site - at the same time.

Notes: *** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.


The Power of Sound

Introducing the Akai Professional MPC Key 61, the revolutionary new standalone production synthesizer keyboard powering the next chapter of the MPC legacy. Building on the history of powerful sequencing and revolutionary sampling, MPC Key 61 adds the most advanced next-generation virtual instruments and effects to MPC, adding to its arsenal of industry-leading music production tools. And now, with the addition of a 61-key semi-weighted keybed with aftertouch, the MPC experience ascends to an unprecedented level of creative interaction and expression, delivering the world's most powerful and complete standalone workflow.

Breaking Sound Barriers

Inside MPC Key 61, experience a new dimension of sound like never before. Powered by 25 plugin instrument engines at your fingertips, and with over 6000 cutting-edge presets, MPC Key 61 delivers the most modern-day sound pallet ever programmed in a production synthesizer. Each plugin instrument features advanced synthesis, deep parameter editing, and modern effects developed for a truly inspiring musical experience-all designed with a fast and vibrant touch interface for an intuitive and compelling workflow. Immerse yourself in a world of sound.

Keys to Expression

The MPC Key 61 features an incredibly expressive and playable semi-weighted keybed with aftertouch to drive its world-class sounds with dynamic responsive control. With players and producers in mind, technology and artisanship were combined to breathe inspiration into every performance. The MPC Key 61's keybed is designed to deliver the highest performance experience possible connecting the dots between sound and feel. The 16-velocity sensitive RGB pads on MPC Key 61 are the same award-winning pads as the MPC One. In addition to the iconic MPC pads are the renowned Time Correct, Swing, and Quantize features of MPC that continue to endure as mainstays of modern music production.

Plugin to a World of Effects

MPC Key 61 includes over 100 state-of-the-art effects ready to load across your music productions for mixing and mastering. Insert lush and spacious Reverb & Delay effects to your tracks, add bounce and punch to your drums and mix using modern or vintage style compressors and limiters. Experience plugin FX like never before only inside MPC Key 61. MPC Key 61 is the world's first production synthesizer incorporating modern day vocal FX plugins which can also be used for the most creative sound design.

Touch Strip and Hands-on Control

The onboard assignable Touch Strip Controller is a catalyst for new ways to control, create and interact with your own signature sounds. Dedicated Pitch Bend and Modulation Wheels mean an added touch of expression to elevate your compositions. Bend the notes of your synth and lead sounds in Fabric XL, add gentle vibrato to your stringed instruments in Session Strings, or dial in the speed of the Organ's rotary Leslie cabinet and hear your parts swell with a wide chorused tremolo.

Specifications

Keys: 61 semi-weighted, full-size keys with aftertouch

Pads: (16) velocity- and pressure-sensitive pads, RGB-backlit, (8) banks accessible via Pad Bank buttons

Knobs + Performance Controls: (4) 360- touch-sensitive Q-Link knobs for parameter adjustment, (1) Touch Strip multi-function 5.5" (140 mm) touch-capacitive controller with LED indicators 360- encoder for display navigation and selection via push, (2) Pitch Bend and Mod Wheel, (3) 270- knobs for gain, mix & level adjustment

Buttons: (44) dedicated-function buttons

Display: 6.9" / 176 mm (diagonal), 5.9" x 3.7" / 150 x 93 mm (width x height), Full-colour LED-backlit display with touch interface

Memory: RAM 4 GB, Storage 32 GB (user storage, 13 GB pre-installed content), 4 GB (MPC operating system), 15+ GB free-space for user storage expandable via SATA connections

Power: Via IEC (Included), Auto Switching Internal Power Supply (100-240v)

Connections: (2) XLR+1/4" (6.35 mm) TRS inputs (Input 1/2) (w/ XLR Mic Preamps), (4) 1/4" (6.35 mm) TRS outputs (2 stereo pairs), 1/4" (6.35 mm) stereo headphone output, (1) 5-pin MIDI input, (1) 5-pin MIDI output, (1) 5-pin MIDI thru, (8) 1/8" (3.5 mm) CV/Gate outputs, Ethernet Network port, USB Type-A ports, (1) USB Type-B port

Other Controls: (2) Line | Instrument switches +48v Phantom Power switch 1/4" (6.35 mm) TRS Footswitch jacks (Sustain + FS2) (Variable and switch compatible) 1/4" (6.35 mm) TRS Expression Pedal input