Sonoma Wire Works GuitarJack 2 iOS Interface
The GuitarJack Model 2 is the highest quality audio interface that connects a wide range of instruments, microphones, and other audio hardware to the iPhone, iPad and iPod touch via 1/4" instrument and 1/8" stereo mic/line inputs. GuitarJack's 1/8" stereo line/headphone output offers increased drive for headphones. The GuitarJack features software controllable input level control with 60 dB of gain plus 12 dB pad for 72 dB of adjustment, software configurable Lo-Z and Hi-Z modes, a 24bit AD/DA converter, and the highest quality sound. The GuitarJack can record in stereo and simultaneously record vocals and an instrument when used with apps like the FourTrack and the StudioTrack that support those features.
Software features:
Control panel in the GuitarTone, FourTrack, StudioTrack & TaylorEQ
Level control: 60 dB of continuous level control
Input modes:
Instrument (1/4"): mono, Pad, Lo-Z or Hi-Z mode
Mic/line (1/8") mono, dual-mono or stereo: pad, normal or boost mode
Both inputs: mic/line input on the right channel and Instrument on the left channel
Included software: the GuitarTone and TaylorEQ are available free.
The GuitarJack enables additional amps and effects in the GuitarTone, FourTrack, and StudioTrack while connected.
The GuitarJack Model 2 is compatible with iPhone 4, iPad 2, iPad, iPod touch (3rd and 4th gen.) Sonoma has also tested GuitarJack with iPhone 3GS, iPhone 4S, and the New iPad with no issues.
The GuitarTone requires iOS 4.2 or later, iPhone 4, iPhone 4S or iPod touch (4th generation).
The specifications:
Line/headphone output: 1 x 1/8" (3.5mm) stereo unbalanced output
Continuously variable gain
Responds to iPod volume up/down buttons
Maximum output level (into 32ohms): 1.00 Vrms (63mW)
Maximum output level (into 10kohms): 1.00 Vrms (+2.2dBu)
Frequency response (20Hz to 20kHz): +0.05/-0.40dB
Noise level (RMS, A-weighted): -97 dB
Dynamic range (RMS, A-weighted): 96 dB
THD (600mVrms into 10kohms): 0.0020% (-94dB)
THD (0dBV into 10kohms): 0.0036% (-89dB)
THD (0dBV into 32ohms): 0.026%
Stereo crosstalk (100Hz to 10kHz): -88dB
Line/Mic Inputs: 1 x 1/8" (3.5mm) stereo unbalanced input
Selectable pad
Continuously variable gain
Minimum input impedance: 4.7kohm
Maximum input level (pad on, line-input): 6.5Vrms (+18dBu)
Minimum input level (boost on, full scale mic): 7.5mVrms (-40dBu)
Frequency response (40Hz to 20kHz): +0.06/-0.65dB
Noise level (RMS, A-weighted): -96dB
Dynamic range (RMS, A-weighted): 96dB
THD (-3dBFS): 0.008% (-82dB)
Stereo crosstalk (1kHz): -96dB
EIN (equivalent input noise, 20kHz BW, 150 ohms): -115dBu
Latency - see FAQ
Instrument Input: 1 x 1/4" (6.5mm) mono unbalanced input
Selectable pad
Selectable impedance
Continuously variable gain
Specifications:
Input impedance: 470kohm
Maximum instrument input level (Lo-Z Pad): 6.5Vrms (+18dBu)
Maximum instrument input level (Hi-Z, 1% THD): 700mVrms
Maximum instrument input level (Hi-Z, 10% THD): 1.5Vrms
Maximum instrument input level (Hi-Z, 20% THD): 2.5Vrms
Device connection
Apple 30-pin dock connector
iPhone 4: made for iPhone certified
iPad 2 and iPad: made for iPad certified
iPod touch (3rd and 4th generation): made for iPod certified
Case: 6061 aluminum, black nickel plated.
Software features:
Control panel in the GuitarTone, FourTrack, StudioTrack & TaylorEQ
Level control: 60 dB of continuous level control
Input modes:
Instrument (1/4"): mono, Pad, Lo-Z or Hi-Z mode
Mic/line (1/8") mono, dual-mono or stereo: pad, normal or boost mode
Both inputs: mic/line input on the right channel and Instrument on the left channel
Included software: the GuitarTone and TaylorEQ are available free.
The GuitarJack enables additional amps and effects in the GuitarTone, FourTrack, and StudioTrack while connected.
The GuitarJack Model 2 is compatible with iPhone 4, iPad 2, iPad, iPod touch (3rd and 4th gen.) Sonoma has also tested GuitarJack with iPhone 3GS, iPhone 4S, and the New iPad with no issues.
The GuitarTone requires iOS 4.2 or later, iPhone 4, iPhone 4S or iPod touch (4th generation).
The specifications:
Line/headphone output: 1 x 1/8" (3.5mm) stereo unbalanced output
Continuously variable gain
Responds to iPod volume up/down buttons
Maximum output level (into 32ohms): 1.00 Vrms (63mW)
Maximum output level (into 10kohms): 1.00 Vrms (+2.2dBu)
Frequency response (20Hz to 20kHz): +0.05/-0.40dB
Noise level (RMS, A-weighted): -97 dB
Dynamic range (RMS, A-weighted): 96 dB
THD (600mVrms into 10kohms): 0.0020% (-94dB)
THD (0dBV into 10kohms): 0.0036% (-89dB)
THD (0dBV into 32ohms): 0.026%
Stereo crosstalk (100Hz to 10kHz): -88dB
Line/Mic Inputs: 1 x 1/8" (3.5mm) stereo unbalanced input
Selectable pad
Continuously variable gain
Minimum input impedance: 4.7kohm
Maximum input level (pad on, line-input): 6.5Vrms (+18dBu)
Minimum input level (boost on, full scale mic): 7.5mVrms (-40dBu)
Frequency response (40Hz to 20kHz): +0.06/-0.65dB
Noise level (RMS, A-weighted): -96dB
Dynamic range (RMS, A-weighted): 96dB
THD (-3dBFS): 0.008% (-82dB)
Stereo crosstalk (1kHz): -96dB
EIN (equivalent input noise, 20kHz BW, 150 ohms): -115dBu
Latency - see FAQ
Instrument Input: 1 x 1/4" (6.5mm) mono unbalanced input
Selectable pad
Selectable impedance
Continuously variable gain
Specifications:
Input impedance: 470kohm
Maximum instrument input level (Lo-Z Pad): 6.5Vrms (+18dBu)
Maximum instrument input level (Hi-Z, 1% THD): 700mVrms
Maximum instrument input level (Hi-Z, 10% THD): 1.5Vrms
Maximum instrument input level (Hi-Z, 20% THD): 2.5Vrms
Device connection
Apple 30-pin dock connector
iPhone 4: made for iPhone certified
iPad 2 and iPad: made for iPad certified
iPod touch (3rd and 4th generation): made for iPod certified
Case: 6061 aluminum, black nickel plated.
- Connect a wide range of instruments, microphones, and other audio hardware to the iPhone, iPad and iPod touch via 1/4 inch instrument and 1/8 inch stereo mic/line inputs
- Record in stereo, or simultaneously record your voice and instrument on separate tracks using GuitarJack with Apps like FourTrack and StudioTrack
- Jam to the GuitarTone amps and effects App and the song tool (coming soon) in FourTrack and StudioTrack. These Apps are optimized to sound best with GuitarJack. More GuitarTone amps and effects enabled free while GuitarJack is connected
- Enhance the sound of your guitar with Taylor EQ, optimized for use with Taylor guitars and GuitarJack
- Listen to music using the stereo output on GuitarJack, which has increased drive for headphones
- Control panel in the GuitarTone, FourTrack, StudioTrack & TaylorEQ
- Level control: 60 dB of continuous level control
$124.58
ORDER BY PHONE
quote 458132
quote 458132
020 7424 1960
Guaranteed in stock!
Order by 5pm for same-day shipping (Mon-Fri)
Order by 5pm for same-day shipping (Mon-Fri)
Order by phone or collect from our London office
Call us on 020 7424 1960 (Mon-Fri, 10am-6pm, Sat 9am-5pm)
Call us on 020 7424 1960 (Mon-Fri, 10am-6pm, Sat 9am-5pm)
Same day UK & Worldwide shipping
Royal Mail, Parcel Force and FedEx options available
Royal Mail, Parcel Force and FedEx options available
Price match guarantee
We'll match or beat any price advertised by an authorised UK supplier.
Call us on 020 7424 1960 (Mon-Fri, 9am-6pm, Sat 9am-5pm).
We'll match or beat any price advertised by an authorised UK supplier.
Call us on 020 7424 1960 (Mon-Fri, 9am-6pm, Sat 9am-5pm).
Secure shopping
| Manufacturer | Sonoma Wire WorksView all Sonoma Wire Works products |
| Product type | Guitar tuners & interfacesView all Guitar tuners & interfaces |
| Description | iOS interface with instrument and stereo mic/line inputs and outputs |
| Cat | GUITARJACK2 |
| Also known as | Sonoma Wire Works GuitarJack 2 iOS Interface |
PEOPLE WHO BOUGHT THIS ALSO BOUGHT:
| 889.5 | 20 May - 26 May 2013 | © 1996 - 2013 Juno Records Ltd. | Privacy Policy |