RME Advanced Remote Control For Fireface UFX Fireface UCX Audio Interface
This wired Advanced Remote Control (ARC) has been designed for direct access to the most frequently used actions and commands required in a studio's daily work. Its extremely flexible configuration through TotalMix FX will simplify the workflow and greatly increase the usability of the RME interface in any real world situation.
The Advanced Remote Control (ARC) can be used with all Fireface UCX. It can also be used with all Fireface UFX with a serial number 23241707 (built after June 2011) or higher. Upcoming interfaces that feature an Advanced Remote Control connector will also be compatible. Users that own a Fireface UFX with a serial number below 23241707 have to send their UFX to their distributor as it requires a hardware modification to be fully compatible to the Advanced Remote Control.
The ARC consists of a solid metal case with a main encoder dial, 2 x push buttons and 6 x LED-equipped buttons. The Remote Control connects to the main interface via a 5m cable and a special connector on the back of both units.
Available commands/actions (examples):
Main volume
Global mute
Global solo
Mute group 1 to 4
Solo group 1 to 4
Fader group 1 to 4
Link main AB
Speaker B select
DIM (main out)
Mute (main out)
Mute FX (main out)
Mono (main out)
External input
Reverb
Echo
Cue phones 1 to 4
Snapshot 1 to 8
Mic gains
Inst. gains
Volume phones.
Several functions can be activated at the same time. Example: button A is set to cue phones 1. That means the phones submix is heard via the main output (the studio monitors). Now to be able to also change the volume of the phones submix itself, set button B to volume phones 1. Activating both will allow you to listen to the phones submix via the main output, and also to change its volume (the fader in the third row) by turning the encoder knob.
In stand-alone mode of Fireface UCX and UFX there is no TotalMix FX on the host computer. Therefore the settings for the ARC are no longer available. Instead a fixed set of functions is activated:
Turn encoder: main out volume
Push on encoder: dim for main out
Recall button: recall function for main out
Prog: no function
Buttons A to F: load Setup 1 to 6.
The Advanced Remote Control (ARC) can be used with all Fireface UCX. It can also be used with all Fireface UFX with a serial number 23241707 (built after June 2011) or higher. Upcoming interfaces that feature an Advanced Remote Control connector will also be compatible. Users that own a Fireface UFX with a serial number below 23241707 have to send their UFX to their distributor as it requires a hardware modification to be fully compatible to the Advanced Remote Control.
The ARC consists of a solid metal case with a main encoder dial, 2 x push buttons and 6 x LED-equipped buttons. The Remote Control connects to the main interface via a 5m cable and a special connector on the back of both units.
Available commands/actions (examples):
Main volume
Global mute
Global solo
Mute group 1 to 4
Solo group 1 to 4
Fader group 1 to 4
Link main AB
Speaker B select
DIM (main out)
Mute (main out)
Mute FX (main out)
Mono (main out)
External input
Reverb
Echo
Cue phones 1 to 4
Snapshot 1 to 8
Mic gains
Inst. gains
Volume phones.
Several functions can be activated at the same time. Example: button A is set to cue phones 1. That means the phones submix is heard via the main output (the studio monitors). Now to be able to also change the volume of the phones submix itself, set button B to volume phones 1. Activating both will allow you to listen to the phones submix via the main output, and also to change its volume (the fader in the third row) by turning the encoder knob.
In stand-alone mode of Fireface UCX and UFX there is no TotalMix FX on the host computer. Therefore the settings for the ARC are no longer available. Instead a fixed set of functions is activated:
Turn encoder: main out volume
Push on encoder: dim for main out
Recall button: recall function for main out
Prog: no function
Buttons A to F: load Setup 1 to 6.
- The top features a rotary encoder with push switch function, 2 x lower buttons, and 6 x upper buttons with status LED
- The rotary encoder is used to change various parameters, like gain and volume
- The left button Prog is programmable, and can perform several functions
- The upper 6 x buttons include a status LED to signal the current state
- Provides default settings for the 7 programmable buttons, but can be freely configured via the Key Commands dialog of TotalMix FX
- All buttons can be assigned to more than 36 x different commands
- The behaviour of each individual button can be changed between push, toggle, enable and disable, depending on the base function
$162.57
ORDER BY PHONE
quote 451969
quote 451969
020 7424 1960
Guaranteed in stock!
Order by 5pm for same-day shipping (Mon-Fri)
Order by 5pm for same-day shipping (Mon-Fri)
Order by phone or collect from our London office
Call us on 020 7424 1960 (Mon-Fri, 10am-6pm, Sat 9am-5pm)
Call us on 020 7424 1960 (Mon-Fri, 10am-6pm, Sat 9am-5pm)
Same day UK & Worldwide shipping
Royal Mail, Parcel Force and FedEx options available
Royal Mail, Parcel Force and FedEx options available
Price match guarantee
We'll match or beat any price advertised by an authorised UK supplier.
Call us on 020 7424 1960 (Mon-Fri, 9am-6pm, Sat 9am-5pm).
We'll match or beat any price advertised by an authorised UK supplier.
Call us on 020 7424 1960 (Mon-Fri, 9am-6pm, Sat 9am-5pm).
Secure shopping
| Manufacturer | RMEView all RME products |
| Product type | Audio & MIDI interfacesView all Audio & MIDI interfaces |
| Description | Wired remote control designed for direct access to the most frequently used actions and commands |
| Cat | ARC |
| Also known as | RME Advanced Remote Control |
PEOPLE WHO BOUGHT THIS ALSO BOUGHT:
| 889.6 | 20 May - 26 May 2013 | © 1996 - 2013 Juno Records Ltd. | Privacy Policy |