Skip Navigation

MY LANGUAGE:
English
Español
Deutsch
简体中文
日本語
MY CURRENCY:
USD
USD dropdown
Labels
     
    Release Date
  • Forthcoming
    1
  • Last 6 Months
    6
View:
Options
Items 1 to 50 of 58 on page 1 of 2
1 | 2 | »
Rode Blimp 2 Windshield & Shockmount System
 Add to cart
 1 in stock $215.26
Cat: 542941 Rel: 03 Nov 14
 
Complete windshield and shock mounting accessory for NTG series microphones
Notes: The RODE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 3/4") in length. Now featuring the Rycote Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The Blimp's handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). The Blimp attaches to any standard boompole via 3/8" thread attachment at the base.

The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
Read more
Rode Boompole Pro (extends to 3m)
 Add to cart
 1 in stock $186.78
Rode Boompole Pro (extends to 3m) (microphone boompole)
Cat: 589405 Rel: 28 Dec 15
 
Carbon fibre boompole, extends to 3 metres
Notes: Made from carbon fibre, the RODE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2' 8"), extends to a full 3m (10'). Designed for use with professional shotgun microphones such as the RODE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RODE's popular boom pole range which now consists of five models ranging in size, weight, and construction material.

Each of the five pole sections is comprised completely from carbon fibre making it incredible lightweight while maintaining high levels of strength. The sections are easily extendable with one hand thanks to an intuitive twist-lock mechanic.

RODE offers boom pole cable clips as an optional accessory, however the company's new RODELink wireless XLR adaptor allows users to record audio from a shotgun microphone on the end of the Boompole Pro without the hassle and possible handling noise of cables.
Read more
Rode Broadcaster Condenser Microphone
 Add to cart
 1 in stock $294.98
Cat: 485576 Rel: 25 Mar 13
 
Precision large diaphragm condenser microphone ideal for broadcast voice applications
Notes: The Rode Broadcaster is a large diaphragm, end address condenser microphone designed for broadcast voice applications. Its response has been tailored to give a rich, full, broadcast quality with an emphasised proximity effect, making it an ideal 'on air' radio microphone, equally fitting for voice over applications for film and television.

The Broadcaster features an internal pop filter, designed to minimise plosive sounds that can overload the microphone capsule and distort the audio output. In addition to its native 20Hz - 20kHz response, a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many mix consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. For more information please see the user manual.

The RODE Broadcaster microphone is covered by RODE Microphones' industry leading 10 year warranty.
Read more
Rode Broadcaster Condenser Microphone (B-STOCK)
 Add to cart
 1 in stock $199.31
Cat: 545054 Rel: 11 Aug 14
 
B-STOCK: Box opened, product unused
Notes: The Rode Broadcaster is a large diaphragm, end address condenser microphone designed for broadcast voice applications. Its response has been tailored to give a rich, full, broadcast quality with an emphasised proximity effect, making it an ideal 'on air' radio microphone, equally fitting for voice over applications for film and television.

The Broadcaster features an internal pop filter, designed to minimise plosive sounds that can overload the microphone capsule and distort the audio output. In addition to its native 20Hz - 20kHz response, a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many mix consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. For more information please see the user manual.

The RODE Broadcaster microphone is covered by RODE Microphones' industry leading 10 year warranty.
Read more
Rode Deadcat Artificial Furry Microphone Windshield For Rode WSVM
 Add to cart
 1 in stock $29.90
Cat: 466889 Rel: 03 Sep 12
 
Windshield used in conjuction with the Rode WSVM foam windshield
Notes: The DeadCat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.


Read more
Rode Deadcat Go Wind Shield For Videomic Go
 Add to cart
 5 in stock $20.49
Cat: 539290 Rel: 23 Jun 14
 
Windshield cover for the Rode VideoMic Go
Notes: The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Read more
FORTHCOMING
Rode iClamp6 iXY Support Clamp For iPhone 6 & 6 Plus
e-mail me when released
coming soon $TBA
Cat: 605834 Rel: 30 May 16
 
Rode i-XY microphone mount for iPhone 6 and iPhone 6 Plus
Notes: The iClamp6 is an additional rubber clamp that allows the i-XY stereo microphone (lightning version) to be used with the iPhone 6 and iPhone 6 Plus.
Read more
Rode Invisilav Discreet Lavalier Mounting System (3 pack)
 Add to cart
 2 in stock $15.94
Cat: 522680 Rel: 12 May 14
 
Pack of 3 discreet mounts for lavalier microphones
Notes: The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones.

Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side.

Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
Read more
Rode iXY Lightning Stereo Microphone for iOS Devices
 Add to cart
 1 in stock $143.79
Cat: 542938 Rel: 13 Oct 14
 
Compact stereo microphone for iOS devicesm with Apple lightning connector
Notes: The RODE iXY is the ultimate recording microphone for iPhone and iPad. With up to 24-bit/96k recording and on-board high-fidelity A/D conversion, your iXY recordings are rich, smooth and accurate.

At the heart of the iXY is a matched pair of 1/2" cardioid condenser capsules, fixed in a perfect 90 degree 'near-coincident' alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high detail.

Designed and manufactured in Australia, the iXY is available in two versions - Lightning and 30-pin. The Lightning version supports the iPhone 5s, iPhone 5 and iPhone 5c. The 30-pin version supports the iPhone 4S, iPhone 4, iPad (3rd generation) and iPad 2.

A foam windshield is supplied for outdoor recording as well as a reinforced protective zip case to ensure your iXY is available whenever you need it.
Read more
Rode Lav Headset Mount For Lavalier Microphones (junior size)
 Add to cart
 2 in stock $22.77
Cat: 555070 Rel: 08 Dec 14
 
Ergonomic wearable mount for Rode Lavalier and Smartlav+ microphones
Notes: The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RODE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.

Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.

*Please note: Lavalier microphone not included*
Read more
Rode M1 Dynamic Microphone
 Add to cart
 1 in stock $65.72
Cat: 446898 Rel: 13 Feb 12
 
Live performance dynamic microphone
Notes: With rock-solid build quality and a high-power neodymium capsule, the Rode M1 live dynamic microphone is designed to provide the very best performance night after night, while taking all the abuse expected of a microphone with the rock 'n' roll credentials of Rode.

The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being weighty or heavy, and handling noise is all but eliminated by the microphone's internal design.

Featuring a warm response that is never muddy or undefined, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.

Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.

The microphone and steel mesh head are presented in an attractive and durable satin black finish.

The Rode M1 live performance dynamic microphone is covered by Rode Microphones' lifetime warranty, providing peace of mind that your microphone is covered for many years to come.
Read more
Rode M3 Condenser Microphone
 Add to cart
 1 in stock $75.17
Rode M3 Condenser Microphone (condenser microphone)
Cat: 446901 Rel: 20 Feb 12
 
Condenser microphone for recording/live vocals, guitar, drums and public speaking
Notes: The Rode M3 is a highly versatile condenser microphone powered by 9V battery or phantom power.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 is at home in the studio, on stage or on location and is equally suitable as a vocal microphone, guitar microphone, drum microphone or presenter microphone.

A -10 dB and -20 dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.

The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom.

The Rode M3 versatile multi-powered microphone is covered by Rode Microphones' industry leading 10 year warranty.

Read more
Rode M5 Compact Condenser Microphones (matched pair)
 Add to cart
 1 in stock $138.95
Cat: 512992 Rel: 16 Dec 13
 
Pair of sonically matched condenser microphones including stand mounts and wind shields
Notes: Designed and made in Australia, the M5 is a compact 1/2" cardioid condenser microphone with low noise and a full frequency response. A result of many years' experience building the award-winning NT5 microphone, RODE has succeeded in making a high quality "pencil" style permanently polarized condenser that will impress even the most demanding of artists and engineers.

Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array.

This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair.

The M5 is finished with RODE's proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.
Read more
Rode MiCon 1 Sennheiser Locking Minijack
 Add to cart
 3 in stock $12.53
Cat: 455771 Rel: 04 Jun 12
 
MiCon connector for select Sennheiser devices
Notes: The Rode MiCon connector system provides seamless integration between the Rode HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems.

The MiCon-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport.
Read more
Rode MiCon 7 Connector for Lectrosonics SM series, UMa series, LMa series and UM450.
 Add to cart
 1 in stock $15.38
Cat: 485700 Rel: 25 Mar 13
 
MiCon 7 connector for select Lectrosonics devices
Notes: The Rode MiCon connector system provides seamless integration between the Rode HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-7 is designed to connect to Lectrosonics transmitters SM series, UMa series, LMa series and UM450.

Read more
Rode MiCon5 Adaptor For HS1 Lavalier & PinMic
 Add to cart
 2 in stock $22.77
Cat: 455768 Rel: 04 Jun 12
 
Adaptor for HS1, Lavalier & PinMic
Notes: The Rode MiCon connector system provides seamless integration between the Rode HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.

The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power. It is also compatible with the Rode MiCon cable 1.2m or MiCon cable 3m for added convenience.
Read more
Rode MiniFur Lav Artificial Fur Wind Shield For Lavalier Mic
 Add to cart
 1 in stock $12.53
Cat: 485708 Rel: 25 Mar 13
 
Synthetic fur windshield for outdoor or high wind use of Lavalier microphones
Notes: The Minifur-Lav is a synthetic fur cover for the lavalier microphone, designed for use in outdoor or high wind conditions.

3 supplied in pack.

*Microphone not included*
Read more
Rode NT USB Condenser Microphone (black)
 Add to cart
 2 in stock $146.92
Cat: 543648 Rel: 18 Aug 14
 
Side-address USB microphone with all-metal pop shield and desktop stand included
Notes: The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over.

It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RODE Rec, GarageBand, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit.

The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input.

A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimise plosives (hard 'B', 'T' or 'P' sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8" thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use.
Read more
Rode NT1 Cardoid Condenser Microphone Kit (black)
 Add to cart
 2 in stock $219.97
Cat: 512084 Rel: 16 Dec 13
 
Large diaphragm condenser microphone with revolutionary new shock mount and carry bag
Notes: The NT1 is a revolutionary new 1" diagphram condenser microphone from RODE.

Although the body of the new NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille.

RODE's design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule which is a completely new design. Codenamed the HF6, it is the perfect example of RODE's fusion of artistic design approaches and cutting-edge manufacturing techniques, and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise. It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class.

In another world-first for RODE, the transducer itself is suspended inside the microphone using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide the lowest noise level of any studio microphone available. The NT1 is an incredibly quiet microphone, measuring only 4.5dBA of self-noise.

Its body is machined from 6061 aluminium and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by RODE to ensure an extremely hard wearing finish that is resistant to scratches or marks.

The NT1 is supplied with the revolutionary new RODE SMR shock mount. Featuring a unique double-Lyre suspension system, the SMR enhances the existing superior vibration cancellation of Rycote's Lyre system by using a smaller inner Lyre to act as a tensioning element. This maintains each Lyre in the neutral position where it is most efficient at cancelling vibration. The SMR's removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable and designed to last as long as the shock mount and microphone.
Read more
Rode NT1A Cardoid Condenser Microphone Pack With Shockmount Pop Filter XLR Cable Bag & Tutorial DVD
 Add to cart
 3 in stock $146.92
Cat: 446891 Rel: 20 Feb 12
 
Condenser microphone for vocal recording + Shockmount with intergrated Pop-Filter + 6m XLR cable + bag + a Tutorial DVD
Notes: The Rode NT1-A 1" cardioid condenser microphone has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability typically only featured on some of the most expensive microphones.

With a self noise level of only 5 dBA it is widely recognised as the world's quietest studio microphone. This low noise makes it ideal for vocal recording as well as voice overs and environmental recording.

Packaged in the Complete Vocal Recording Solution, the NT1-A includes everything you need to get a truly professional vocal recording and is ideal for home studio recording.

A studio grade pop shield and shock mount is included, along with a premium microphone cable, dust cover, and an instructional DVD with recording tips.

The NT-1A continues this tradition while improving specifications and tonal qualities. Using cutting edge technology for electronics, RODE has implemented a computer controlled manufacturing line. Unlike many leading brands, all electronic boards are made without human hands assuring high specifications, tight tolerances and unsurpassed consistency. It's built to last with a new computer controlled machine process. This product is also available as a Matching Pair.

The Rode NT1-A large diaphragm 1" cardioid condenser microphone is covered by Rode Microphones' industry leading 10 year warranty.

http://www.youtube.com/watch?v=HpTKZpoyXzs
Read more
Rode NT2A Multi Pattern Dual Condenser Microphone Pack
 Add to cart
 1 in stock $253.98
Cat: 448476 Rel: 27 Feb 12
 
Condenser microphone for recording vocals, instruments and percussion + shockmount + pop-filter + cable
Notes: The NT2-A carries on the tradition forged by the now legendary Rode NT2. A professional large capsule (1") studio microphone incorporating 3-position pick-up patterns, PAD and high pass filter switches conveniently located on the mic body.

At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

Includes SM6 popshield, XLR cable and microphone dust cover.

http://www.youtube.com/watch?v=DCtdnmFxFJs
Read more
Rode NTG1 Condenser Shotgun Microphone
 Add to cart
 3 in stock $163.43
Cat: 464871 Rel: 25 Feb 13
 
Lightweight condeser shotfun microphone
Notes: The Rode NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

In addition to the NTG1 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional DeadCat furry is recommended for outdoor applications.

The Rode NTG1 shotgun microphone is covered by Rode Microphones' industry leading 10 year warranty.

Read more
Rode NTG1 Condenser Shotgun Microphone + Rode NTSM3 Suspension with Hot Shoe Fitting (SPECIAL LOW PRICE BUNDLE - SAVE £13)
 Add to cart
 1 in stock $181.08
Notes: The Rode NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.

In addition to the NTG1 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional DeadCat furry is recommended for outdoor applications.

The Rode NTG1 shotgun microphone is covered by Rode Microphones' industry leading 10 year warranty.

Read more
Rode NTG2 Shotgun Condenser Microphone
 Add to cart
 3 in stock $190.65
Rode NTG2 Shotgun Condenser Microphone (directional condenser microphone)
Cat: 455766 Rel: 04 Jun 12
 
Multi-powered condenser shotgun microphone
Notes: The Rode NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the NTG2 native 20-20000Hz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional DeadCat furry is recommended for outdoor applications.

The Rode NTG2 shotgun microphone is covered by Rode Microphones' industry leading 10 year warranty.

This microphone can either be powered by an AA battery, or phantom power.

www.youtube.com/watch?v=pUVvzytDpTQ
Read more
Rode NTG2 Shotgun Condenser Microphone + Rode Blimp 2 Windshield & Shockmount System (REDUCED PRICE BUNDLE - SAVE £10)
 Add to cart
 1 in stock $394.52
Cat: 564569 Rel: 02 Mar 15
 
Multi-powered condenser shotgun microphone - bundled with Rode Blimp 2 system
Notes: The Rode NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the NTG2 native 20-20000Hz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional DeadCat furry is recommended for outdoor applications.

The Rode NTG2 shotgun microphone is covered by Rode Microphones' industry leading 10 year warranty.

This microphone can either be powered by an AA battery, or phantom power.

www.youtube.com/watch?v=pUVvzytDpTQ
Read more
Rode NTG4+ Directional Condenser Microphone With Inbuilt Battery
 Add to cart
 1 in stock $283.59
Cat: 561651 Rel: 02 Mar 15
 
Shotgun condenser microphone with internal rechargeable battery and broadcast quality sound
Notes: Building on the popularity and acceptance of the RODE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.

The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
Read more
Rode NTR Active Ribbon Microphone
 Add to cart
 1 in stock $528.84
Rode NTR Active Ribbon Microphone (active ribbon microphone)
Cat: 561648 Rel: 02 Mar 15
 
Active studio ribbon microphone with highly sensitive 1.8 micron ribbon element and bi-directional polar pattern
Notes: At first glance of the NTR you're aware that it's very special and unique - an intricate blend of art and science.

Designed to hang in the world's finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for RODE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at RODE's headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available.

Sonically, the NTR is capable of reproducing unprecedented high frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element.

Measuring only 1.8 microns, the NTR ribbon was designed to provide the highest level of sensitivity across the useable frequency response range.

Most ribbon microphone manufacturers manually cut the element, resulting in microscopic frays along the edges that decay over time. Rode uses a proprietary laser technique to cut the NTR ribbon, giving a far more precise cut with smooth edges, increasing it's longevity.

The NTR's integrated shock mounting is so effective an external shock mount is not required.

A "travel screw" secures the sensitive ribbon element and shock mount in place when not in use.

The chemically etched all-metal mesh is extremely rigid while exhibiting super-low density, this results in greater acoustic transparency.

The solid frame around the ribbon capsule is positioned entirely within the rejection zone of the capsule's bidirectional polar pattern.

The ribbon is mounted distinctly separate to the microphone body, allowing the greatest possible acoustic transparency around the ribbon element and minimising any resonance.

Married to Rode's ribbon element is a high output, ultra-low noise, low-impedance transformer. This ensures maximum fidelity between the NTR's ribbon motor and electronics.

In combination with the transformer this allows the NTR to be used with a wide range of preamps without the additional gain requirements of many other ribbon offerings.
Read more
Rode NTR Active Ribbon Microphone (B-STOCK)
 Add to cart
 1 in stock $568.32
Cat: 612039 Rel: 09 May 16
 
***B-STOCK: Box opened, product unused***
Notes: At first glance of the NTR you're aware that it's very special and unique - an intricate blend of art and science.

Designed to hang in the world's finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for RODE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at RODE's headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available.

Sonically, the NTR is capable of reproducing unprecedented high frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element.

Measuring only 1.8 microns, the NTR ribbon was designed to provide the highest level of sensitivity across the useable frequency response range.

Most ribbon microphone manufacturers manually cut the element, resulting in microscopic frays along the edges that decay over time. Rode uses a proprietary laser technique to cut the NTR ribbon, giving a far more precise cut with smooth edges, increasing it's longevity.

The NTR's integrated shock mounting is so effective an external shock mount is not required.

A "travel screw" secures the sensitive ribbon element and shock mount in place when not in use.

The chemically etched all-metal mesh is extremely rigid while exhibiting super-low density, this results in greater acoustic transparency.

The solid frame around the ribbon capsule is positioned entirely within the rejection zone of the capsule's bidirectional polar pattern.

The ribbon is mounted distinctly separate to the microphone body, allowing the greatest possible acoustic transparency around the ribbon element and minimising any resonance.

Married to Rode's ribbon element is a high output, ultra-low noise, low-impedance transformer. This ensures maximum fidelity between the NTR's ribbon motor and electronics.

In combination with the transformer this allows the NTR to be used with a wide range of preamps without the additional gain requirements of many other ribbon offerings.
Read more
Rode NTRM2 Ring Mount Microphone Stand For NT2A/NT1000/NT2000/NTK/K2 Classic II & Broadcaster Microphones
 Add to cart
 1 in stock $12.53
Cat: 459095 Rel: 25 Jun 12
 
Stand mount for microphone
Notes: The NT-RM2 is a low profile professional stand mount for the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphone. It screws onto the bottom of the microphone providing an easy and convenient attachment system for your large diaphragm condenser microphones.
Read more
Rode NTSM2 Suspension Mount For Rode NT2A/NT1000/NT2000/NTK/K2/Classic II microphones
 Add to cart
 1 in stock $50.11
Cat: 485600 Rel: 25 Mar 13
 
Suspension mount for Rode NT2-A, NT1000, NT2000, NTK, K2 and Classic II microphones
Notes: The Rode NTSM2 Suspension Mount is a high qualiity shock mount for your microphone, providing near-perfect shock isolation, performance after performance amd reducing ambient and low-frequency noise.

It can be used with the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II and other similar sized condenser microphones.
Read more
Rode NTSM3 Suspension with Hot Shoe Fitting For NT3/NT4/NT5/NTG series
 Add to cart
 3 in stock $38.14
Cat: 484091 Rel: 18 Mar 13
 
Suspension hot shoe mount for Rode NT3/4/5 and NTG series microphones
Notes: The SM3 is a shock mount designed to significantly reduce vibration transmission to all shotgun microphones. The SM3 is perfect for use with the Rode NTG series and features a 4-way rubber suspension system with a quick release tilt mechanism to aid directional positioning and avoid visual intrusion. The SM3 features a 3-way mounting system with 1/4" x 20 and 3/8" 16 internal threads for boom pole or tripod mounting and a standard hot shoe adaptor for direct camera mounting.
Read more
Rode PG1 Cold Shoe Pistol Grip For VideoMic/Stereo VideoMic
 Add to cart
 2 in stock $12.98
Cat: 484094 Rel: 18 Mar 13
 
Pistol grip for use with Rode VideoMic and Stereo VideoMic
Notes: The Rode PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your Rode VideoMic, Stereo VideoMic, or any other cold-shoe device independently of your video camera. A convenient 3/8" thread on the base allows connection to a boom pole or microphone stand, while the spine features handy cable management.
Read more
Rode PG2 Shock Mounted Pistol Grip For 19-20mm/21-22.5mm Microphone
 Add to cart
 1 in stock $59.21
Cat: 470037 Rel: 08 Oct 12
 
Shock mount designed to reduce handling noise, for microphone with a diameter of 19-20mm or 21-22.5mm
Notes: The RODE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.

It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.

Cable management is an integral design feature of the PG2 pistol grip, with the cable running through the handle assembly to minimise any handling noise or clutter. Additional cable security is provided on either side of the rubber shock mount.

The PG2 can be operated by hand or attached to a boompole via the 3/8" thread attachment at the base.
Read more
Rode PSA1 Studio Microphone Boom Arm For Procaster & Podcaster Microphones
 Add to cart
 More than 10 in stock $78.59
Cat: 455764 Rel: 04 Jun 12
 
Professional studio boom arm
Notes: The PSA1 is a studio boom arm for radio, broadcast, studio and home use. It provides full 360 degree rotation.

The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert).

Designed for the Rode Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount.

Please note that the PSM1 shock mount is sold separately.

Read more
Rode Reporter Omnidirectional Interview Microphone
 Add to cart
 1 in stock $135.53
Cat: 509380 Rel: 25 Nov 13
 
Dynamic handheld microphone designed for interview purposes
Notes: Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.

Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.

The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.

It is supplied with a removable microphone 'flag' that can accommodate high visibility branding.

The Reporter is covered by Rode's industry leading support guarantee, with a twelve month warranty 'out of the box' that is easily increased to ten years free of charge, following online registration of the microphone.
Read more
Rode Rodegrip For iPhone 4 & 4S
 Add to cart
 1 in stock $29.61
Rode Rodegrip For iPhone 4 & 4S (mount for iPhone 4 and 4S)
Cat: 522673 Rel: 03 Mar 14
 
Multi purpose mount for iPhone 4 and 4S models
Notes: The RODEGrip is a multi-purpose mounting solution for the Apple iPhone 4 and iPhone 4S.

Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RODEGrip can be used in a number of orientations and setups. These include:

- Handheld audio recording with the iXY stereo microphone
- Boom stand mounted audio recording with the iXY
- Camera-mounted audio recording with the iXY
- Handheld pistol grip filming with the iPhone
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps

Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.
Read more
Rode Rodegrip For iPhone 5C
 Add to cart
 1 in stock $29.04
Rode Rodegrip For iPhone 5C (smartphone mount)
Cat: 539295 Rel: 01 Sep 14
 
Multi-purpose mounting solution for the Apple iPhone 5c
Notes: The RODEGrip is a multi-purpose mounting solution for the Apple iPhone 5c.

Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RODEGrip can be used in a number of orientations and setups. These include:

- Handheld audio recording with the iXY stereo microphone
- Boom stand mounted audio recording with the iXY
- Camera-mounted audio recording with the iXY
- Handheld pistol grip filming with the iPhone
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps

Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.
Read more
Rode Rodegrip+ For iPhone 5C
 Add to cart
 1 in stock $59.79
Rode Rodegrip+ For iPhone 5C (smartphone mount)
Cat: 539296 Rel: 01 Sep 14
 
Multi-purpose mounting solution for use with Apple iPhone 5C with lens kit included
Notes: The RODEGrip+ is a multi-purpose mounting solution with high-quality lens kit for the Apple iPhone 5C.

Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RODEGrip can be used in a number of orientations and setups. These include:

- Handheld pistol grip filming with the iPhone
- Handheld audio recording with the iXY stereo microphone
- Boom stand mounted audio recording with the iXY
- Camera-mounted audio recording with the iXY
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps

The RODEGrip+ is supplied with three high-quality photographic lenses (2x Telephoto, 180 degree fisheye, wide-macro) that screw into the frame to allow for versatile filmmaking on the iPhone.

Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.
Read more
Rode RODELink Filmmaker Kit Wireless Microphone System
 Add to cart
 2 in stock $294.98
Cat: 561644 Rel: 18 May 15
 
Digital wireless system for film makers with 128-bit encryption & a range of up to 100m - lavalier microphone included
Notes: RODELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RODELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone.

The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions.

The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RODE's omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
Read more
Rode SC1 TRRS Extension Cable For SmartLav & SmartLav+ TRRS (6m)
 Add to cart
 8 in stock $15.93
Cat: 561655 Rel: 27 Apr 15
 
3.5mm TRRS extension cable for SmartLav microphones
Notes: The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones.

Measuring 6m/20', the SC1 features gold plated contacts for superior audio reproduction.
Read more
Rode SC1 TRRS Extension Cable For SmartLav & SmartLav+ TRRS (6m) (B-STOCK)
 Add to cart
 1 in stock $12.52
Cat: 616038 Rel: 27 Apr 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones.

Measuring 6m/20', the SC1 features gold plated contacts for superior audio reproduction.
Read more
Rode SC3 3.5mm TRRS To TRS Adaptor Cable For Smart Lav
 Add to cart
 3 in stock $12.81
Cat: 539297 Rel: 23 Jun 14
 
3.5mm TRRS to TRS adapter cable for Rode Smart Lav microphone
Notes: The SC3 is a high-quality shielded adaptor, designed to allow the smartLav to connect to 3.5mm TRS devices such as cameras and audio recorders.

The gold-plated contacts are colour coded, with grey indicating the TRRS input.
Read more
Rode SC4 3.5mm TRS To TRRS Adaptor Cable For Smartphones & Tablets
 Add to cart
 3 in stock $10.24
Cat: 539298 Rel: 23 Jun 14
 
3.5mm TRS to TRRS adapter cable for smartphones and tablets
Notes: The SC4 is a high-quality shielded adaptor, designed to allow microphones with a 3.5mm output to connect to TRRS smartphones and tablets.

This is ideal for users wanting to connect their RODE VideoMic to their iPhone, and record using the RODE Rec app for iOS.

The gold-plated contacts are colour coded, with grey indicating the TRRS output.

While the SC4 was designed to operate with Apple iOS devices such as the iPhone and iPad, it is compatible with the majority of Android devices on the market.

Note that the SC4 is compatible with stereo microphones, with both left and right channels combined to a mono signal to be compatible with TRRS.
Read more
Rode SC6 Dual TRRS Input & Headphone Output For Smartphones
 Add to cart
 2 in stock $13.66
Cat: 522678 Rel: 31 Mar 14
 
Signal breakout box for smartphones and tablet devices
Notes: The SC6 is an input/output breakout box for smartphones and tablets. With two TRRS inputs and one stereo headphone output, the unit connects to any TRRS device and allows the use of one or two smartLav microphones as well as headphones for monitoring and playback.

With the SC6 users can monitor audio from the smartLav, as well as input two smartLavs into the one mono channel in interview or dual-dialogue scenarios.

(Note that the two microphone inputs will be recorded to the same channel)
Read more
Rode SC8 Dual Male 3.5mm TRS Cable For Videomicro & Videomic Go (6m)
 Add to cart
 1 in stock $27.28
Cat: 605835 Rel: 11 Apr 16
 
Premium shielded extension cable for Videomicro & Videomic Go on-camera microphones - 6 metre length
Notes: The SC8 is a premium shielded extension cable for use with the VideoMicro and VideoMic GO microphones. Measuring 6m/20', the SC8 features gold plated contacts for superior audio reproduction.
Read more
Rode Smartlav+ Omnidirectional Lavalier Microphone For Apple iPhone, iPad & iPod Touch
 Add to cart
 3 in stock $55.81
Cat: 542940 Rel: 06 Oct 14
 
Lavalier microphone for use with smartphones
Notes: The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RODE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management. Its Kevlarr reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RODE's RODE Rec app for Apple iOS devices. RODE Rec turns the user's iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.
Read more
Rode Stereo VideoMic Carry Bag
 Add to cart
 2 in stock $14.79
Rode Stereo VideoMic Carry Bag (microphone accessory)
Cat: 485693 Rel: 25 Mar 13
 
Carry bag designed for the Stereo VideoMic and accessories
Notes: The SMV Bag is designed to carry the Stereo VideoMic along with spare batteries, shock mount bands and other small accessories.
Read more
Rode Stereo VideoMic Pro Microphone
 Add to cart
 2 in stock $192.48
Cat: 460882 Rel: 16 Jul 12
 
Condenser microphone for video camera
Notes: Building on the success of the VideoMic Pro, which quickly became the defacto standard for DSLR on-camera audio, and Rode's original Stereo VideoMic, the new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.

Based around a matched pair of high sensitivity 1/2" cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.

The Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.

The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.

A -10 dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.

Like the VideoMic Pro, the Stereo VideoMic Pro features a +20 dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
Read more
Rode Stereo VideoMic Pro Microphone + FREE Rode Carry Bag
 Add to cart
 1 in stock $157.17
Cat: 554100 Rel: 10 Nov 14
 
Condenser microphone for video camera - bundled with a FREE carry bag
Notes: Building on the success of the VideoMic Pro, which quickly became the defacto standard for DSLR on-camera audio, and Rode's original Stereo VideoMic, the new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.

Based around a matched pair of high sensitivity 1/2" cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.

The Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.

The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.

A -10 dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.

Like the VideoMic Pro, the Stereo VideoMic Pro features a +20 dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
Read more
Rode Vampire Clip
 Add to cart
 1 in stock $10.92
Rode Vampire Clip (microphone accessory)
Cat: 485706 Rel: 25 Mar 13
 
Double toothed clothing pin mount for lavalier
Notes: The Rode Vampire Clip is a double-toothed clothing pin that conveniently fastens the Rode Lavalier microphone onto a wide range of fabric and clothing for complete mounting versatility.

Read more
Items 1 to 50 of 58 on page 1 of 2
1 | 2 | »
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close