Skip Navigation

USD dropdown
    Release Date
  • Last 2 Weeks
  • Last Year
Items 1 to 12 of 12 on page 1 of 1
Mode Machines ADX1 Analog Drum Machine
 Add to cart
 1 in stock $591.38
Cat: 564306 Rel: 16 May 16
Powerful 5 channel analogue drum expander with individual outputs, MIDI control and infinite sound tones
Notes: Analog Drum Machine:
Mode Machines brought again the ADX 1, a powerful 5 channel Analogue Drum Expander with individual outputs, MIDI control and infinite amount of sound tones thanks to its generous amount of knobs to control its parameters.

The 5 Channels provide different sound palettes.

Metal: Metal is used to create cymbal sounds and consists of two different metallic-sounding Generators. Two filters, Envelope/modulation options, Decay and Release.

HiHat: HiHat consists of one metallic-sounding noise generator and one "clean" signal, Pitch control, mix, modulation, filter, Envelope modulation, Decay and Release.

Snare: The sound of Snare is created by one metallic-sounding noise generator through two band pass filters connected in parallel, Decay and Release.

Synth: Is used to create sounds like bells or synthesizers and consists of 3 sinus Oscillators. FM and Bend for a wide palette of sounds, Attack and Release.

Bass: Consists of one sinus oscillator, with pitch control. Additional Overtones can be created by frequency modulation. Attack simulates the "Pluck" of a bass string, Release to control the length and Distortion available for dirtier sounds.
Read more
Mode Machines AT2 Analog Distortion Pedal
 Add to cart
 1 in stock $31.37
Cat: 591866 Rel: 09 Nov 15
Analog distortion effects pedal
Notes: The AT2 Distortion is a guitar/bass True Bypass effect, suitable to be used in a wide range of synthesizers, drums, voice...

Aallows you to easily get that ACID sound out of the x0xb0x or any other TB-303 clone in no time.

The pedal has a DC connector for external 9v supply or else you can add an internal 9v battery that fits nicely inside and connects easily with a clip connector.
Read more
Mode Machines Cerebel USB To MIDI Serial Converter Interface
 Add to cart
 1 in stock $106.20
Cat: 564328 Rel: 12 Oct 15
USB-MIDI to serial converter interface - ideal for where a computer/laptop is not required
Notes: USB-MIDI to Serial Converter:
Mode Machines is proud to present the CerebelUSB, a tiny USB Host which makes possible to convert USB-MIDI Class Compliant devices in to standard MIDI (5 pin DIN conectors). Ideal for any situation where a Laptop or computer is not desired.

Making use of a wide range of small, portable and affordable USB-MIDI devices is now possible without a PC or Mac.

It's small size and light weight makes it perfect to fit anywhere, an extremely convenient tool for artist who gig around with just the right setup. CerebelUSB allows you to power other 5V USB Devices using the HUB, like smartphones, tablets, Camera, USB lights, etc.

CerebelUSB only works with USB devices which are MIDI Class Compliant. Even if announced as being so, many available products are non Class Compliant. Check the product manual of your device or contact the manufacturer to make sure your device is Class Compliant.

Arduino Brain:
CerebelUSB is based around Arduino for a very simple reason, allowing experienced users to upload their own firmware, upgrade the CPU easily or make use of the remaining pins for a huge amount of modifications and add-ons. This opens up a whole new world of possibilities for the user.

It uses a Max32 Chip for the host functionality, sharing a compatible Pinout with most Arduino USB Host Shields on the market. This makes easy to use new firmwares already available on the internet for non programmers.

With the right firmware, It is possible to connect any USB device such as Joysticks, gamepads, wii-motes, Bluetooth devices, Webcams, DSLR cameras, Android devices and many others.
Read more
Mode Machines DT200 V2 Programmer For Roland JX3P & MKS30 Synthesizers
 Add to cart
 2 in stock $248.61
Cat: 553430 Rel: 20 Apr 15
Programmer specially designed for the dual- DCO, 6 voice polyphonic synthesizer such as JX-3P, MKS-30 and GR-700.
Notes: The Mode Machines DT-200 is the programmer specially designed for the dual- DCO, 6 voice polyphonic synthesizer such as the JX-3P, MKS-30 and GR-700.

It has the same functions as the Roland PG-200.

The Roland pg200 is 25+ years old,hard to get and not cheap at all. The DT200 has the latest in technology, is easy to use and looks great with your MKS30 or JX3p.

It features high quality switches and potmeters. The DT-200 V2 uses high quality retro looking switches. On the bottom there are magnetic strips just like the original PG-200.

6pin DIN cable included.
Read more
Mode Machines DTronics Nano MIDI Merger
 Add to cart
 1 in stock $79.35
Cat: 591859 Rel: 09 Nov 15
Nano series Midi Merger unit
Notes: Low latency midi merger with midi timing prority

Despite its small size and low price, it is an intelligent MIDI merger.
It has two MIDI IN ports and two MIDI OUT ports. Both midi inputs are opto-isolated. An indicator lamp lights when midi data is being received. The two MIDI outputs are identical Merged Signals of inputs 1 and 2.

The Nano merger handles all MIDI message types, including System Exclusive and MIDI Time Code, and clock.

Channel Voice messages are normally transmitted in the order in which they were received.

Midi timing commands have higer priority. So if Note Data is received at channel 1, and a midi timing message comes in at channel 2, the timing message will be sent to the output as soon as possible, interrupting the note commands from channel 1, ensuring extreme low latency, and minor drift in midi timing.
Read more
Mode Machines DTronics Nano MIDI Thru
 Add to cart
 1 in stock $50.68
Cat: 591861 Rel: 09 Nov 15
Nano series Midi Thru unit
Notes: Features:
Now avaible the Dtronics nano series Midi Thru.

The Nano Thru is a 1-in 3-out Low Latency MIDI Thru Box, with data correction. The Nano Thru provides additional MIDI Thru ports in a classic MIDI setup, this way you will eliminate latency caused by daisy-chaining midi equipment.

All MIDI messages appearing at the In Port are sent unchanged to all three Thru ports.

The signal is cleaned by the hardware, by analyzing the data and completing lost data strings ensuring any signal scew is eliminated.
The Nano Thru is externally powered to ensure error free operation over long cables and has a low latency of max. 3 micro seconds.
A MIDI indicator LED flashes when MIDI data is received.
Read more
Mode Machines DTronics Nano MIDI To Sync Converter For TR808 TR606 TB303 SH101 Linndrum DMX MS06
 Add to cart
 1 in stock $90.51
Cat: 591860 Rel: 09 Nov 15
Nano series MIDI to Sync converter
Notes: Now avaible the Dtronics nano series Midi to Sync converter (For TR-808 , TR-606 , TB-303 , SH-101, linndrum, dmx, MS-06 )

Dtronics Nano Sync is the new version of the well known Dtronics MS-06 midi to sync converter.

The Nano sync converts midi clock to sync pulses.
It has 2 Dinsync outputs that can individualy be set to 24 , 48 or 96 ppqn, to use with roland TR-808 , TR-606 , TB-303 , SH-101, KORG, LINN and Oberheim.
A jack sync output that can be used with arpeggiators or sequencers and it can be programmed from 24/127 ppqn up to 24ppqn.

It has low latency of less than 0.2 miliseconds.
A Led shows the current clock speed (1/24 of clock frequency).

Power input: 9 DC, max 100mA. (2.1mm plug, + on center pole)

Average latency: < 0.2ms

Size: 76 x 71 x 31 mm
Read more
Mode Machines MAP01 MIDI Arpeggiator
 Add to cart
 1 in stock $254.65
Cat: 449246 Rel: 23 Nov 15
Programmable and highly flexible USB MIDI arpeggiator with 4 arpeggio styles
Notes: The MAP-01 is a highly programmable MIDI arpeggiator, featuring 4 different arpeggio styles.

The user friendly interface consists of a function knob and three buttons with LEDs for quick and clear operation, and of course a clear backlit LCD display.
Read more
Mode Machines MC1 Mode Case
 Add to cart
 1 in stock $91.79
Mode Machines MC1 Mode Case (DJ equipment case)
Cat: 449247 Rel: 17 Dec 12
Flightcase for x0xb0x, x0xb0x MK2, KRP-1 and SID
Notes: Mode Machines ModeCase MC1 is desighed for x0xb0x, x0xb0x MK2, KRP-1 and SID.
Read more
Mode Machines RP1 Retrophones Headphones
 Add to cart
 3 in stock $21.71
Cat: 564329 Rel: 12 Oct 15
Pair of professional retro-look headphones - ideal for multimedia or gaming applications - inline mic/1-button remote for use with smartphones & tablets
Notes: Say hello to the Mode Machines Retrophones. Old School Headphones and microphone set, with a stylish design, that resembles an elegant mix betwen retro and modern look, delivering at the same time a very modern sound.

Perfect for multimedia or gaming applications. Compatible with Smartphones and tablets.
Read more
Mode Machines RP1 Retrophones Headphones (B-STOCK)
 Add to cart
 2 in stock $33.89
Cat: 590374 Rel: 12 Oct 15
B-STOCK: Box missing, product in perfect working order
Notes: ***B-STOCK: Box missing, product in perfect working order***

Say hello to the Mode Machines Retrophones. Old School Headphones and microphone set, with a stylish design, that resembles an elegant mix betwen retro and modern look, delivering at the same time a very modern sound.

Perfect for multimedia or gaming applications. Compatible with Smartphones and tablets.
Read more
Mode Machines x0xb0x Mk3 TB303 Clone Synthesizer & Sequencer
 Add to cart
 1 in stock $578.10
Cat: 564270 Rel: 30 Mar 15
Synthesizer & sequencer hybrid, based on the legendary Roland TB-303
Notes: x0xb0x = Synth + Sequencer

The x0xb0x is not just another MIDI-controlled TB-303 clone. x0xb0x is a full reproduction of the original Roland synthesizer, with fully functional sequencer. The sequencer can be programmed just like the original 303 (ok its actually a little easier, we think) and can be used to control other synthesizers via any of its various output formats. 128 banks of track memory and 64 banks of pattern memory are stored in onboard EEPROM, no battery-backup is needed!

The Socksbox MK3 is the consequent onwards development of the perfect TB-303 Clone. We have improved the production flow of this model and switched the production to exclusive 100% German hand made quality. The difference betwen old MK models and the MK3 is just aesthetics.

This fact will guarantee you a much better sound by full discrete analogue signal processing. We also guarantee that our chief technician will calibrate each unit personally and by hand to sound like a real TB-303. We will not release a unit for shipping before it sounds like the "real thing".

Additionally we have improved the quality of the pots, encoders, switches by only using components from the best suppliers, most of them from Germany.

The best 303-Clone ever made! Based on the original x0xb0x by Limor Fried, Adafruit Industries

The x0xb0x (Adafruit edition) was available as a kit that includes all parts necessary to build a x0xbox: PCB, case with CNC machined faceplate, components, buttons and knobs, AC adaptor, pre-programmed microcontroller, and (of course) poorly xeroxed assembly manual... You supplied the sweat & tears.

x0xb0x is spelled with two zeros and is pronounced "zocks box"

*This item ships with 2-pin EU style plug*
Read more
Items 1 to 12 of 12 on page 1 of 1
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now