Items 1 to 12 of 12 on page 1 of 1
Cat: 601688 Rel: 12 Oct 15
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order*** … Read more
USB-MIDI to Serial Converter:
Mode Machines is proud to present the CerebelUSB, a tiny USB Host which makes possible to convert USB-MIDI Class Compliant devices in to standard MIDI (5 pin DIN conectors). Ideal for any situation where a Laptop or computer is not desired.
Making use of a wide range of small, portable and affordable USB-MIDI devices is now possible without a PC or Mac.
It's small size and light weight makes it perfect to fit anywhere, an extremely convenient tool for artist who gig around with just the right setup. CerebelUSB allows you to power other 5V USB Devices using the HUB, like smartphones, tablets, Camera, USB lights, etc.
CerebelUSB only works with USB devices which are MIDI Class Compliant. Even if announced as being so, many available products are non Class Compliant. Check the product manual of your device or contact the manufacturer to make sure your device is Class Compliant.
CerebelUSB is based around Arduino for a very simple reason, allowing experienced users to upload their own firmware, upgrade the CPU easily or make use of the remaining pins for a huge amount of modifications and add-ons. This opens up a whole new world of possibilities for the user.
It uses a Max32 Chip for the host functionality, sharing a compatible Pinout with most Arduino USB Host Shields on the market. This makes easy to use new firmwares already available on the internet for non programmers.
With the right firmware, It is possible to connect any USB device such as Joysticks, gamepads, wii-motes, Bluetooth devices, Webcams, DSLR cameras, Android devices and many others.
Cat: 553430 Rel: 20 Apr 15
Programmer specially designed for the dual- DCO, 6 voice polyphonic synthesizer such as JX-3P, MKS-30 and GR-700.
Notes: The Mode Machines DT-200 is the programmer specially designed for the dual- DCO, 6 voice polyphonic synthesizer such as the JX-3P, MKS-30 and GR-700. … Read more
It has the same functions as the Roland PG-200.
The Roland pg200 is 25+ years old,hard to get and not cheap at all. The DT200 has the latest in technology, is easy to use and looks great with your MKS30 or JX3p.
It features high quality switches and potmeters. The DT-200 V2 uses high quality retro looking switches. On the bottom there are magnetic strips just like the original PG-200.
6pin DIN cable included.
Cat: 591863 Rel: 09 Nov 15
Programmer/controller for Alpha Juno 1, 2 and MKS-50 synthesizers
Notes: The DT/300 is the perfect companion to control the Alpha Juno 1, 2 and MKS-50 synthesizers. … Read more
It offers complete control over all editable parameters in an easy to use Layout. It is a well designed controller with the same robust quality as the DT200.
It is now possible to control the Redominator VST plug-in with the DT-300 programmer. The DT-300 can be switched between legacy mode (alpha juno sysex) and controller mode (Midi-CC)
Cat: 591859 Rel: 09 Nov 15
Nano series Midi Merger unit
Notes: Low latency midi merger with midi timing prority … Read more
Despite its small size and low price, it is an intelligent MIDI merger.
It has two MIDI IN ports and two MIDI OUT ports. Both midi inputs are opto-isolated. An indicator lamp lights when midi data is being received. The two MIDI outputs are identical Merged Signals of inputs 1 and 2.
The Nano merger handles all MIDI message types, including System Exclusive and MIDI Time Code, and clock.
Channel Voice messages are normally transmitted in the order in which they were received.
Midi timing commands have higer priority. So if Note Data is received at channel 1, and a midi timing message comes in at channel 2, the timing message will be sent to the output as soon as possible, interrupting the note commands from channel 1, ensuring extreme low latency, and minor drift in midi timing.
Cat: 591860 Rel: 09 Nov 15
Nano series MIDI to Sync converter
Notes: Now avaible the Dtronics nano series Midi to Sync converter (For TR-808 , TR-606 , TB-303 , SH-101, linndrum, dmx, MS-06 ) … Read more
Dtronics Nano Sync is the new version of the well known Dtronics MS-06 midi to sync converter.
The Nano sync converts midi clock to sync pulses.
It has 2 Dinsync outputs that can individualy be set to 24 , 48 or 96 ppqn, to use with roland TR-808 , TR-606 , TB-303 , SH-101, KORG, LINN and Oberheim.
A jack sync output that can be used with arpeggiators or sequencers and it can be programmed from 24/127 ppqn up to 24ppqn.
It has low latency of less than 0.2 miliseconds.
A Led shows the current clock speed (1/24 of clock frequency).
Power input: 9 DC, max 100mA. (2.1mm plug, + on center pole)
Average latency: < 0.2ms
Size: 76 x 71 x 31 mm
Cat: 591861 Rel: 09 Nov 15
Nano series Midi Thru unit
Notes: Features: … Read more
Now avaible the Dtronics nano series Midi Thru.
The Nano Thru is a 1-in 3-out Low Latency MIDI Thru Box, with data correction. The Nano Thru provides additional MIDI Thru ports in a classic MIDI setup, this way you will eliminate latency caused by daisy-chaining midi equipment.
All MIDI messages appearing at the In Port are sent unchanged to all three Thru ports.
The signal is cleaned by the hardware, by analyzing the data and completing lost data strings ensuring any signal scew is eliminated.
The Nano Thru is externally powered to ensure error free operation over long cables and has a low latency of max. 3 micro seconds.
A MIDI indicator LED flashes when MIDI data is received.
Cat: 449247 Rel: 17 Dec 12
Flightcase for x0xb0x, x0xb0x MK2, KRP-1 and SID
Notes: Mode Machines ModeCase MC1 is desighed for x0xb0x, x0xb0x MK2, KRP-1 and SID. … Read more
Cat: 571246 Rel: 20 Apr 15
Studio "ON AIR" lamp
Notes: A studiol amp in professional cabinet, including power supply. … Read more
*UK switchable power supply is included
Cat: 510772 Rel: 23 Nov 15
4 pole true analog filter based on the transistor ladder filter developed by Moog
Notes: A four pole true analogue filter. This is based on the famous transistor ladder filter developed by Dr Bob Moog in the 1960s. A front panel pot controls the filter cut-off frequency, another controls the resonance. The resonance control is configured not to cause volume drop when turned up. The filter can be made to oscillate if required. … Read more
Two filter outputs are available. One is the Fizz output. This is a type of -6dB/octave filter and it gives a unique filtering effect with a real bite. The other is the Smooth output. This is a classic -24dB/octave filter, and gives a smooth warm analogue filter sound. Each filter output goes via its own reversible attenuator. This means not only can you adjust the output level, but also the phase of the output signal. This allows complex filter shapes to be made when the two outputs are mixed together in various degrees. This includes a very nice sounding band pass filter.
A wet/dry control allows the filtered audio to be mixed with the original signal. Not only is this useful in controlling the depth of the effect, but it can also create unusual phasing and vibrato type effects.
A wide range pre-amplifier is included. You can use the OMF-1 with virtually any input from guitars to synthesisers. A peak indicator will allow you to monitor overloads, although the OMF-1 is designed to overdrive beautifully.
An inbuilt low frequency oscillator with triangle and square waveforms. The frequency can be changed from 0.05Hz (one cycle in 20 seconds) to over 50Hz. A bi-colour LED gives visual indication of the speed of the LFO. Use the LFO to create auto wah and phaser type effects. The LFO can also be selected to trigger the envelope generator.
An ingenious dynamic envelope section that can move the filter cut off point up or down. It can be put into one of three modes at a flick of a switch:
FLR: It can function as a useful envelope follower, with controllable attack and decay times. Perfect for simulating many classic dynamic follower filter boxes. Play louder and hear the filter open up.
AD: It can be a standard attack-decay envelope generator. This is a type of one shot envelope, that rises and falls at the presence of an initial trigger signal. Useful for percussive type sounds.
AR: It can be a standard attack-release envelope generator. This is triggered either by the LFO, external gate signal or by an automatic audio trigger circuit with a variable threshold level. Powerful for creating rising crescendos.
The final output volume can be controlled with a level control. The output circuitry is configured to drive long length cables with ease and without ground loops.
A side chain input is available. This is a second audio input that can control the main input, but is not heard directly. Use this to trigger the envelope generator, or drive the envelope follower. A common use of this is to make the main audio program respond to a drum machine's output for syncopated effects. Use a deep rich string patch as your main input, and listen to the drum machine automatically pulse the output to the beat. Awesome!
CV and gate inputs are available for connection to a modular synth or midi-CV convertor. The CV input will control the filter frequency, and the gate control will trigger the envelope generator if selected.
With a second OMF-1 a stereo unit may be built. The two channels can either be run independantly or linked together for true stereo processing.
Cat: 564329 Rel: 12 Oct 15
Pair of professional retro-look headphones - ideal for multimedia or gaming applications - inline mic/1-button remote for use with smartphones & tablets
Notes: Say hello to the Mode Machines Retrophones. Old School Headphones and microphone set, with a stylish design, that resembles an elegant mix betwen retro and modern look, delivering at the same time a very modern sound. … Read more
Perfect for multimedia or gaming applications. Compatible with Smartphones and tablets.
Cat: 590374 Rel: 12 Oct 15
B-STOCK: Box missing, product in perfect working order
Notes: ***B-STOCK: Box missing, product in perfect working order*** … Read more
Say hello to the Mode Machines Retrophones. Old School Headphones and microphone set, with a stylish design, that resembles an elegant mix betwen retro and modern look, delivering at the same time a very modern sound.
Perfect for multimedia or gaming applications. Compatible with Smartphones and tablets.
Cat: 564270 Rel: 30 Mar 15
Synthesizer & sequencer hybrid, based on the legendary Roland TB-303
Notes: x0xb0x = Synth + Sequencer … Read more
The x0xb0x is not just another MIDI-controlled TB-303 clone. x0xb0x is a full reproduction of the original Roland synthesizer, with fully functional sequencer. The sequencer can be programmed just like the original 303 (ok its actually a little easier, we think) and can be used to control other synthesizers via any of its various output formats. 128 banks of track memory and 64 banks of pattern memory are stored in onboard EEPROM, no battery-backup is needed!
The Socksbox MK3 is the consequent onwards development of the perfect TB-303 Clone. We have improved the production flow of this model and switched the production to exclusive 100% German hand made quality. The difference betwen old MK models and the MK3 is just aesthetics.
This fact will guarantee you a much better sound by full discrete analogue signal processing. We also guarantee that our chief technician will calibrate each unit personally and by hand to sound like a real TB-303. We will not release a unit for shipping before it sounds like the "real thing".
Additionally we have improved the quality of the pots, encoders, switches by only using components from the best suppliers, most of them from Germany.
The best 303-Clone ever made! Based on the original x0xb0x by Limor Fried, Adafruit Industries
The x0xb0x (Adafruit edition) was available as a kit that includes all parts necessary to build a x0xbox: PCB, case with CNC machined faceplate, components, buttons and knobs, AC adaptor, pre-programmed microcontroller, and (of course) poorly xeroxed assembly manual... You supplied the sweat & tears.
x0xb0x is spelled with two zeros and is pronounced "zocks box"
*This item ships with 2-pin EU style plug*
Items 1 to 12 of 12 on page 1 of 1