The Shure N447 Stylus is for use with Shure M44 & M44-7 cartridges.
With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.
More than 10 in stock $74.02
Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
The only difference between the two models is that the M44-7-H comes pre-mounted on a Technics headshell virtually eliminating set up time. The M44-7 does not include a headshell so one will need to be provided in order to use the cartridge on your turntable. Both models include one stylus and an accessory kit that features a headshell screwdriver, stylus cleaning brush and headshell weight.
The Shure N-WHLB is a truly revolutionary piece of DJ technology. Tailored for the club environment, the White Label features sonic characteristics including solid drop bass, flat mids and accented highs. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact and improved stylus visibility.
More than 10 in stock $37.54
Decksavers are specifically designed to keep your technology investment safe and sound. Decksavers are tailor-made to exacting standards to fit the Technics turntable like a glove. Rather than using cheaper inferior acrylic, each one is made from polycarbonate, a very hardwearing plastic used in bullet proof glass, and made to fit your gear as closely as possible. The use of polycarbonate means that thinner material can be used, making for discrete, strong yet attractive protection for your Technics turntable. Indeed, great care is taken to trim each Decksaver to achieve the best fit and still leave cables in place.
The cover has a very strong contruction with sufficient flat areas allowing support for CDJs, laptops, midi controllers, etc.
One end of this wire has a spade lug connection, whilst the other is bare wire.
More than 10 in stock $116.93
Tailored for the club environment, the Whitelabel features sonic characteristics including solid drop bass, flat mids, and accented highs. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact and improved stylus visibility.
Compatible with iPod, iPhone and almost all portable music players.
More than 10 in stock $25.09
Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the colour throughout a run. Every record is unique.
*** PLEASE NOTE: AS WITH ALL COLOURED VINYL, THERE MAY BE SLIGHT TRACES OF OTHER COLOURS WITHIN THE VINYL. THIS IS NORMAL AND DOES NOT MEAN THE VINYL IS DEFECTIVE. IT DOES NOT ADVERSELY AFFECT THE PRESSING IN ANY WAY AND RETURNS OF THIS NATURE CANNOT BE ACCEPTED ***
More than 10 in stock $31.11
More than 10 in stock $63.80
The M44G is a versatile performance needle, appropriate for both intensive scratching and mixing.
The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables.
From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.
This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.
The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.
KRK's Rokit 5 G3 (Generation 3) powered studio monitors offer professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1" soft dome tweeter and 5" glass aramid composite woofer. It delivers high frequencies up to 35KHz, vocal clarity and extended bass response. The proprietary bi-amped, class A/B amplifier grants SPL up to 106dB. The Rokit waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion. Multiple input connections ensure the Rokit 5 G3 will easily integrate in any system configuration.
As one of the most used Studio monitors in the world, the Rokit 5 is a high valuable and compact solution towards an accurate mix.
Minirig is an independent audio brand from Bristol (UK), originally inspired by the local soundsystem culture, now taking on, and outperforming, the leading global brands in the portable audio market. Designed and hand-built in Britain, Minirig has won plaudits worldwide for its Bluetooth speaker design, best-in-class battery life and its well-deserved reputation, as the loudest Bluetooth speaker of its size on the market.
Minirig co-founders David Trotter and Tom Tucker comment, "We take battery life and sound quality very seriously here at Minirig. Who wants a portable speaker that only lasts a couple of hours?"
Minirig engineers have now managed to increase battery life to an incredible 80 hours. Whether it's travel, festivals or a big weekender, the Minirig will last as long as you can. The powerful battery can hold its charge for months and also allows for any other USB device to be charged via the Minirig (iPhone 7 recharge approx 2.5 times).
Sound performance is central to the cult status enjoyed by the Minirig brand, and there are significant enhancements in this area. Many hours of development have enabled the design of an extra-large, custom 3" driver, increasing bass response and off-axis response. Together with a 15W amp, this unleashes an extremely powerful yet clean sound. An adaptive audio filter ensures the Minirig delivers the best sound whatever the volume.
Minirig's modular design allows you to Bluetooth connect to a second Minirig, offering true wireless stereo. You can then add a Minirig subwoofer with 30W amp (the smallest, powered portable sub in the world) to create a fully portable 2.1 system, that delivers a sound that can shake the leaves from the trees.
Another key innovation in the revamped Minirig design is the 'over the air' updating function, which, even after purchase, allows for further improvements to be made to the speaker. These may include such things as a custom EQ, or more upgrades to battery life. Minirig features the latest Bluetooth 4.0 APT-X tech and advanced connectivity options are available via the bespoke Minirig app (available for iOS and Android). The over the air updater is a welcome addition in the move towards a future-proof speaker.
The Minirig features a tough, anodised aluminium and textured polycarbonate design, plus an improved IPX5 rated water and dust resistance, making it a perfect speaker for any outdoors lifestyle, while its minimal styling mean it's equally suitable for home use. Minirig have added a brushed aluminium finish to the existing seven colour range, to ensure a look for all tastes.
(These are the screws that holds the MOTOR cover to the deck base. 5 screws per deck, this cover is underneath the rotating platter)
This gauge is exclusively designed for Technics direct drive player systems which come with attached tonearm.
This should not be used with the model SL-110 or SL-120 motor units.
Here Juno try to stock as many spares as possible, Juno are aware of the expenses involved in running DJ equipment and Juno appreciate that people need to get every last ounce out of their equipment.
Decksaver covers are tailor made to exacting standards to fit the DDJ-SX, SX2 & DDJ-RX like a glove. Rather than using cheaper inferior acrylic, each one is made from polycarbonate, a very hardwearing plastic used in bullet proof glass, and made to fit your gear as closely as possible. The use of polycarbonate means that thinner material can be used, making for discrete, strong yet attractive protection for your Pioneer units. Indeed, great care is taken to trim each Decksaver to achieve the best fit and still leave cables in place.
Made from the finest but strongest felt material, DMC slipmats are the No.1 choice for DJs and vinyl lovers across the World. Dependable & hard wearing, they are also resistant to dust & other particles, so will not scuff, scratch or damage vinyl.
Great for your home, studio, club or in competition, these superior slipmats are your turntable and vinyl's best friend.
The preamplifier can be powered by mains outlet or battery, thus avoiding additional cable clutter during DJ sets.
Everyone with a collection of vinyl records knows how important it is to keep them clean. Every use exposes them to environmental impurities that accumulate over time, resulting in a build-up of dirt inside the record grooves that can negatively impact the playing cartridge's lifespan and the overall sound performance of a vinyl hi-fi system. This dirt often consists of both organic and man-made residues that combine to "grate" at the record wall when a stylus is in the groove. The VC-S removes these impurities in a quick, efficient and cost-effective way to extend the life of your records, and bring greater musical enjoyment to your hi-fi experience.
The VC-S uses a specially-developed "wet" chemical solution to clean the record grooves, and then follows this manual process with a high-power vacuum stage. Check out our 'how-to' video below to see just how simple it is...
The VC-S boasts many characteristics that help it stand apart as a superlative vinyl cleaner. The vacuum technology has been specially selected due to its high power, meaning a record side can be dried in as little two rotations. The motor is also much faster than alternative products, achieving a full rotation in around two seconds. It's also capable of dual-directional rotation, for deeper cleaning of the record groove with the supplied record brush.
The purpose-engineered record clamp is machined from aluminium, and lined with a rubber seal that keeps cleaning fluid away from the record label during use. The clamp also replaces the need for a platter, which could potentially bring dirt into contact with a clean record surface. The vacuum arm is equally robust and easy to use in its mechanically stable fixing (which uses no springs).
The VC-S is supplied with Pro-Ject's newly developed vinyl cleaning solution. Wash-IT offers impressive cleaning results, and also reduces the build-up of static charges on a record. Pro-Ject have also developed a special alcohol-free solution developed for use with older 78rpm shellac records (Wash-IT 78). The VC-S is supplied with all the accessories you need to get started, including 100ml of Wash-IT. Separate accessories, including an optional dust cover and various sizes of Wash-IT cleaning solution, are also available.
Whilst there are cheaper record cleaning brushes available on the market, the Spin Clean Record Washer system is by far the best in terms of removing dust, fingerprints and static from your LP records.
The kit comprises fluid bath, a 4oz bottle of cleaning fluid, lint-free drying cloths, 1 pair of brushes, 1 pair of rollers and an instruction manual.
Spin Clean Record Washer System Mk II achieves amazingly effective cleaning power of records due to the special cleaning fluid that grabs hold of the dirt and makes it sink to the botton of the fluid tank, ensuring that your records remain uncontaminated during the cleaning process. Both sides of the record are sleaned at the same time by the Spin Clean Record Washer System Mk II.
The cleaning process is as follows: fill the bath with cleaning fluid, Spin the record three times, then dry off the record with the lint free cloths. Simple and effective. There are no power requirements for the Spin Clean Record Washer System Mk II.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.
- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records
All vinyl LPs can be displayed with its Sponge Finger cushioning back plate. Showcase your 12-inch singles, LPs - even double or triple albums!
Comes with 4 stabilizing cushions so the frame can be mounted easily against any style wall and remain straight. Full installation instructions and concept graphics included.
Package contains one frame - buy several to make a unique display!
This bottle opener is made from high-quality, alloy metal and shaped into a Technics headshell for easy opening of the bottle of your choice.
Impedance is perfectly co-ordinated with DJ-mixers and the closed design blocks ambient noise out in loud locations (AKA DJ Booths!).
What is included?
A heaphone carrying pouch, a 1/4" adapter, plus a spare pair of earpads.