The SP 4x4 also features ART's "4x4" distribution on the back of the unit - four of the eight rear outputs are 1.25" apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from. Built into the SP 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes.
The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The SP 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front mounted circuit breaker reset switch. The rugged, all steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks.
Applications for the SP 4x4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems.
The Phantom II Pro is an invaluable tool in application areas including (but not limited to): home or professional recording studios, live sound, PA, permanent installs, DJ, AV, podcasting and broadcasting. Use it with mixers, audio processors, digital audio workstations or anywhere you need phantom power for your mics.
Built into the PB 4x4 is a Surge and Spike Protection System, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering.
The PB 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The unit has a total power capacity of 1800W, and has a front-mounted, 15 AMP circuit breaker.
The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks. Applications for the PB 4x4 include live sound systems/PA, permanent or fixed installations, church, club and practice PA systems, DJ sound systems, home and project recording systems, and monitor systems.
The PB 4x4 features a one-year warranty.
- Genuine Apple MFi approved product
- Only suitable for use in the United Kingdom, Ireland, Hong Kong, Singapore and Malaysia
- Blue LED power ON indicator
- Capable of charging two devices simultaneously
The Power Adapter can also be used in a transmitter/receiver configuration to send MIDI over long distances. We have tested the operation over 4000 ft. of average 2-conductor audio cable, however individual results will vary depending on factors like the type of cable used, electromagnetic noise present, etc. For a good explanation of what to consider when sending MIDI over long distances, see Richmond Sound Design's FAQ on MIDI Cable Length. It may be possible to use only one Power Adapter at the transmitting end, however in this case results are dependent not only on the cable length, but also on the type of MIDI input that the signal is being sent to. Since MIDI inputs from various manufacturers are designed differently, for best results it is recommended that two Power Adapters be used - one at the transmitting end and another at the receiving end.
Output power jacks: From left to right
One adjustable voltage output power jack, can choose output voltage from 9V/12V/15V/18V. The output current is 200mA.
Three independent output power jacks, each lines output voltage is 9V, and the output current is 200mA.
Four parallel output power jacks, each lines output voltage is 9V. And support the whole 400mA power needs that the four lines parallel into an independent output power jack.
DR-1, GT-R1, DR-2d, DR-07, DR-V1HD, DR-100, DR-100MK2, DP-004, DP-006, DP-008, DP-008EX, CD-GT2, CD-BT2, CD-VT2, MP-GT1, MP-BT1, MP-VT1, GB-10, LR-10, PT-7, US-2x2
Using DC to mini-USB conversion cable:
Using DC to mini-USB conversion cable:
DR-03, DR-05, DR-07MK2, DR-40, DR-22WL, DR-44WL, DR-60D, DR-60DMK2, DR-70D, DR-7
Input power: AC100-240V, 50/60Hz
Output power: 5.0V, 2A