Skip Navigation

Secure shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

Equipment

Equipment

     
    Release Date
  • Forthcoming
    13
  • Today
    1
  • Last Month
    2
  • Last 6 Months
    4
  • Last Year
    15
View:
Options
Items 1 to 49 of 49 on page 1 of 1
Behringer PB600 Pedal Board Universal Effects Pedal Floor Board
 Add to cart
 1 in stock $89.12
Cat: 493821 Rel: 01 Jul 13
 
Universal pedal floor board for up to 6 effects pedals with 9 V DC power supply and patch cables
Notes: When effects are an integral part of your rig, their power adapters and patch cables can often be the most vulnerable part, and the most likely to sabotage your set if they're not pampered. Rather than tossing your pedals, power adapters and all other cabling into a duffel bag after a gig, keep them safe and ready to rock at a moment's notice with the BEHRINGER PB600.

This awesome pedal board makes hooking up six 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). The PB600 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 6 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when you're dealing with a rat's nest of loose cabling, but with the PB600, your effects chain is always safe and organized.

Connect your guitar, bass or keyboard to the single 1/4" Input in the upper right corner of the board. A pair of 1/4" From Effects jacks in the upper left corner allow you to connect stereo effects, and two 1/4" Output To Amp jacks send a left and right stereo signal to up to two amps.

When it's time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB600 and slide the locking latches back into place. The high-impact plastic casing will protect your pedals from the very worst dings, scrapes and scratches the road throws your way.

Ultra compact and lightweight pedal board for transporting up to 6 effects pedals, including patch cables
Generous 1.7 A power adapter included for powering more than 12 devices includes 1 x 6 daisy chain cabling
Ultra rigid plastic design withstands even heavy impact

*** Effects pedals not included ***
Read more
Behringer PX3000 Ultrapatch Pro Multi Functional 48 Point, 3 Mode Balanced Patchbay
 Add to cart
 1 in stock $74.81
Cat: 493512 Rel: 01 Jul 13
 
48 point 1/4" TRS jack, rack mountable patch bay
Notes: Dismantling a stage after a gig, or putting your studio back in order, is much easier when cables are organized. Behringer's Ultrapatch Pro PX3000 helps you conserve space in the studio or on stage, protect your cables and keep them orderly and tangle free.

This 48 point patchbay features high quality, fully balanced 1/4" TRS jacks. The multi functional PX3000 is the ideal way to gain control over the cable runs in your studio. Crawling around under your desk searching for cables will become a thing of the past.

PX3000's three modes are user assignable via the top panel switches and function as follows:

Normal - Interconnects the two rear jacks of one channel; inserting a plug into one of the front jacks interrupts the connection of the rear jacks
Half Normal - Interconnects the two rear jacks of one channel; inserting a plug into the lower front jack interrupts the connection of the rear jacks
Thru - Interconnects each rear jack with its corresponding front jack

The Behringer Ultrapatch Pro PX3000 makes it easy to stay organised and conserve space. Plug into this incredibly useful audio solution and see how it streamlines your stage and studio. Your knees will thank you!
Read more
FORTHCOMING
EBS 2nd Row Pedal Riser (aluminium)
e-mail me when released
coming soon $19.09
EBS 2nd Row Pedal Riser (aluminium) (effects pedal accessory)
EBS
Cat: 628943 Rel: 05 Dec 16
 
Professional lightweight aluminium riser for pedals
Notes: Rise the 2ND ROW of pedals on your pedal board for easier access, or put two risers beneath the board for a comfortable angle of your complete pedalboard. One piece of the 2ND ROW can carry a standard size pedal or two mini-format pedals.

Added comfort and secure switching is accomplished with the 2ND ROW. Due to the design, it can also hide loose cables and make your setup neat and clean.

Lightweight and universal 2ND ROW is made of ultra-light aircraft-grade anodized Aluminium with laser engraved text. Attach it to your pedal board by using Velcro (included) or Dual Lock for universal use.
Read more
Editors Keys Desktop Headphone Stand
 Add to cart
 1 in stock $26.52
Cat: 604084 Rel: 14 Mar 16
 
Desktop headphone hanger/stand made from lightweight acrylic plastic
Notes: The Editors Keys Studio Series Headphone is simple yet beautiful headphone stand, which can sit perfectly on your desk next to your computer monitor.

If you want to prevent your headphones from becoming damaged during recordings, you need the StudioSeries Desktop Headphone Hanger.
Read more
Eowave 3U 84HP Eurorack Modular Case With Power (black)
 Add to cart
 1 in stock $182.50
Cat: 614712 Rel: 27 Jun 16
 
Eurorack synth module case, with built-in power supply - 84HP wide
Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
Eowave 3U Wood End Eurorack Modular Case
 Add to cart
 1 in stock $95.49
Cat: 604977 Rel: 02 May 16
 
3U Eurorack synthesizer module case, with wooden ends - 84HP wide
Notes: Tech Specs
- 84 HP
- 5.4cm Deep
- Made in France
Read more
Eowave USB Expression Pedal
 Add to cart
 1 in stock $75.33
Eowave USB Expression Pedal (expression pedal)
Cat: 604967 Rel: 28 Mar 16
 
Expression pedal with USB for direct connection to computer, full MIDI compatibility
Notes: The USB Pedal is a plug and play USB expression pedal which can be plugged directly to your computer. No MIDI interface is needed and it is 100% MIDI compatible.

You've always wanted to control or trigger some parameters of your MIDI software instrument with an expression pedal? Just connect the USB Pedal to your computer and it will be recognised as an audio device.

By default CC1 is sent to MIDI channel 1, but you may set it differently using the Eomono editor.
Read more
Future Sound Systems AJAK3 3.5mm Jack Plug Connected To Bipolar LED (green/red LED)
 Add to cart
 1 in stock $3.71
Cat: 604239 Rel: 14 Mar 16
 
3.5mm jack plug connected to bipolar LED light, for purely aesthetic purposes - compatible with Eurorack systems
Notes: 3.5mm jack plug connected to bipolar LED

Green LED indicates positive voltage.

Red LED indicates negative voltage.
Read more
FORTHCOMING
iCon Platform D LCD Display Attachment For Platform M
e-mail me when released
coming soon $TBA
Cat: 633935 Rel: 07 Dec 16
 
Modular display unit for the Platform M control surface
Notes: Platform D is the modular display unit for the Platform M control surface. The huge backlit LCD display helps your keep track of each parameter, track and control value in your mix.
Read more
IMG Stage Line DMP 130MIX Audio USB SD Player & Mixer
 Add to cart
 1 in stock $113.53
Cat: 612643 Rel: 16 May 16
 
Rackmountable MP3 player & microphone line mixer with selectable sources (SD card or USB port)
Notes: MP3 player and microphone line mixer:
With this unit combination, it is possible to mix 3 audio signal sources. The integrated MP3 player can be switched between SD card and USB port.

Read more
IMG Stage Line VU800SW 19" Rack Mount LED dB Meter
 Add to cart
 5 in stock $55.17
Cat: 489699 Rel: 13 May 13
 
Rack mount LED dB meter
Notes: Visual display of audio signal via LED horizontal bar indicators. The VU meter LED display responds to the audio signal level and creates an easy to see visual confirmation of your signal.

Read more
Koma Elektronik Kabelhanger Module Set B (medium)
 Add to cart
 8 in stock $24.67
Cat: 608841 Rel: 05 Dec 16
 
Aluminium hanger set for organizing cords
Notes: Keep it all organized with the KOMA Kabelhanger; by placing your cables directly on a hanger next to your system, they are always in arms' reach! Tour-proof screws that you can twist with by hand for quick installation and removal before and after gigs. The Hanger can be mounted either to the 2HP front panel or whereever it suits your needs. Both the hanger's arm and the face plate are of 2mm thick aluminium and powder coated white.

- Set B: 21cm/8.3" (2x20 teeth) - medium
Read more
Mackie ProFX12 & DFX12 Mixer Bag
 Add to cart
 1 in stock $37.13
Cat: 492630 Rel: 24 Jun 13
 
Highly durable, reinforced mixer bag
Notes: The highly durable mixer bag is reinforced with chunky foam, tarped corners, padded shoulder strap and two zippered & padded outer pockets.
Read more
Mackie ProFX12 & DFX12 Mixer Bag (B-STOCK)
 Add to cart
 1 in stock $33.95
Cat: 555357 Rel: 24 Jun 13
 
B-STOCK: Box opened, product in perfect working order
Notes: *** B-STOCK: Box opened, product in perfect working order ***

The highly durable mixer bag is reinforced with chunky foam, tarped corners, padded shoulder strap and two zippered & padded outer pockets.
Read more
Make Noise 20hp Blank Panel (with Maths module inspired lightning bolts design)
 Add to cart
 2 in stock $9.60
Cat: 559435 Rel: 02 Feb 15
 
20hp blank panel for modular synth system
Notes: 10hp blank panel for modular synth system with lightning bolt pattern inspired by the Maths synth module.
Read more
Make Noise 4hp Blank Panel
 Add to cart
 4 in stock $4.77
Make Noise 4hp Blank Panel (blank synth panel)
Cat: 557524 Rel: 22 Dec 14
 
4hp blank panel for modular synth system
Notes: 4hp blank panel for modular synth system
Read more
Nagaoka HC800/II Tape Recorder Head & Capstan Cleaner
 Add to cart
 1 in stock $15.39
Cat: 567564 Rel: 30 Mar 15
 
Tape head and capstan cleaner kit with cleaning fluid and swabs
Notes: One bottle is a rubber cleaner/preservative agent.The other is a head cleaner agent. Can be used for any type of audio tape machine by qualified personnel.

Suitable for the cleaning of cassette decks and cassette recorders, reel to reel tape recorders, mini cassette tape recording and play-back devises. Important do not use on video recorders.
Read more
Native Instruments Maschine & Maschine MK2 Stand
 Add to cart
MRP:$71.30 SAVE 30%
 1 in stock $49.82
Cat: 467037 Rel: 08 Oct 12
 
Stand designed for the Maschine. Please note: not compatible with the Maschine Mikro
Notes: The Maschine Stand is an essential accessory for anyone using the Maschine. It fits both first generation Maschine models and the new black and white Mk2 hardware controllers, and includes a mounting adapter for use with standard drum hardware. Made of robust aluminum, with a black anodized finish and rubber pads for non-slip grip, the stand is designed to provide a strong hold, maximum visibility and improved ergonomics for both studio and stage.

Please note that the Maschine Stand is not compatible with the Maschine Mikro.

The Maschine Stand fits neatly into typical desktop environments, with just the right 15- angle for maximum visibility, ergonomic beat production and ultimate no-wobble, non-slip stability.

Locating pins prevent the hardware from shifting sideways and rubber pads front and back make sure the Maschine unit sits snugly on the stand. Down at the bottom, non-slip rubber feet hold the stand steady on your studio desktop.

The stand is rugged enough for any stage, and comes complete with a sturdy, die-cast mounting adapter, letting you mount your Maschine like a snare drum on standard 7/8" drum clamps.

Ideal for integrating the Maschine into your drum setup, or just to hold your Maschine at exactly the right height for optimum visibility and positioning when performing live.
Read more
Neutrik NYS SPP L1 1/4" Jack 48 Way Rackmount Patch Panel (black)
 Add to cart
 1 in stock $69.77
Cat: 616177 Rel: 20 Jun 16
 
24 channel balanced 1/4" jack patch bay panel
Notes: 24 channel half normalled, balanced 6.35mm jack patch panel. Can be rackmounted.

Read more
Propellerhead USB Ignition Key
 Add to cart
 1 in stock $27.06
Cat: 570434 Rel: 20 Apr 15
 
USB ignition key for safe storage of your Reason & Rack Extension licenses
Notes: Add your Reason and Rack Extension licenses to this USB Ignition Key if you are using Reason on several computers, without access to internet.

This product can also be purchased as a replacement item, if you have lost your previous Ignition Key

Please note that only one Ignition Key can be authorized at a time. If you are using Reason 7 /Reason Essentials 2 or higher, you can also authorize your licenses to a single computer, for offline use. This way you can use Reason without being connected to the internet, or without a USB port taken up by the key.
Read more
QTX Attachable Music & Tablet Shelf
 Add to cart
 1 in stock $16.34
QTX
Cat: 630251 Rel: 14 Nov 16
 
Adjustable shelf/stand for music and tablet
Notes: Attach this music/tablet shelf to any suitable stand or pole with a diameter of between 14 to 35mm. This covers most microphone and music stands, so should work with your existing equipment. The stand is locked in place via a 'C' clamp which is easy to adjust and secure in any position. The angle is adjustable and the stand can be moved left and right to get the viewing position exactly right.
Read more
FORTHCOMING
Roland CBBEC10 Bag For EC10 Electronic Cajon
e-mail me when released
coming soon $88.06
Cat: 634450 Rel: 14 Dec 16
 
Black Series instrument bag designed for the ELCajon EC-10
Notes: Lightweight and durable, Black Series instrument bags are perfect for performers on the go. A rugged exterior and thick internal padding shield your instrument from bumps and bruises, and the convenient shoulder straps make carrying easy. Ideal for everyday use, the CB-BEC10 protects your ELCajon EC-10 in style.
Read more
FORTHCOMING
Roland CBBHPD20 Bag For HPD20 HandSonic & SPDSX Sampling Pad
e-mail me when released
coming soon $88.06
Cat: 634451 Rel: 14 Dec 16
 
Black Series instrument bag designed for the HandSonic HPD-20
Notes: Lightweight and durable, Black Series instrument bags are perfect for performers on the go. A rugged exterior and thick internal padding shield your instrument from bumps and bruises, and the convenient shoulder straps make carrying easy. Ideal for everyday use, the CB-BHPD20 protects your HandSonic HPD-20 in style.
Read more
FORTHCOMING
Roland CBBOCT Bag For Octapad SPD30
e-mail me when released
coming soon $88.06
Cat: 634453 Rel: 14 Dec 16
 
Black Series instrument bag designed for the OCTAPAD SPD-30
Notes: Lightweight and durable, Black Series instrument bags are perfect for performers on the go. A rugged exterior and thick internal padding shield your instrument from bumps and bruises, and the convenient shoulder straps make carrying easy. Ideal for everyday use, the CB-BOCT protects your OCTAPAD SPD-30 in style.
Read more
FORTHCOMING
Roland CBBSPDSX Bag For SPDSX Sampling Pad
e-mail me when released
coming soon $88.06
Cat: 634454 Rel: 14 Dec 16
 
Black Series instrument bag designed for the SPD-SX sampling pad
Notes: Lightweight and durable, Black Series instrument bags are perfect for performers on the go. A rugged exterior and thick internal padding shield your instrument from bumps and bruises, and the convenient shoulder straps make carrying easy. Ideal for everyday use, the CB-BSPDSX protects your SPD-SX Sampling Pad in style.
Read more
FORTHCOMING
Roland RASS01 Small Amp Stand
e-mail me when released
coming soon $35.01
Cat: 634456 Rel: 14 Dec 16
FORTHCOMING
Roland RMS10 Music Stand
e-mail me when released
coming soon $35.01
Cat: 634457 Rel: 14 Dec 16
Samson SMS1000 Mixer Stand Holder
 Add to cart
 1 in stock $32.88
Samson SMS1000 Mixer Stand Holder (mixer stand holder)
Cat: 606396 Rel: 28 Mar 16
 
Top plate mixer stand/holder for Samson Expedition XP1000/XP510i mixer part - attaches to standard microphone stand
Notes: Take A Stand:
The SMS1000 Mixer Stand Holder is the ideal accessory for Samson's Expedition XP1000 and XP510i Portable PAs, custom-designed to fit either system's mixer. The SMS1000 mounts to any standard microphone stand, allowing for custom placement of the mixer. With a solid metal design, the mixer stand is built to handle heavy and constant use. Samson's SMS1000 Mixer Stand Holder provides exceptional convenience to PA users everywhere, allowing for audio level adjustments to be made without interrupting ongoing performances.

*Photographed microphone stand & mixer are not included*
Read more
Sound LAB Universal Cable Tester
 Add to cart
 1 in stock $29.18
Cat: 578308 Rel: 29 Jun 15
 
Multi-cable tester compatible with most audio leads, with clear LED indication
Notes: This is a versatile cable tester for use with most audio leads; the product can test the following leads:

8 & 4 Pole Speakon, Small Din, 3.5 mm Jack, 3 & 5 Pin XLR Male, 3 & 5 Pin XLR Female, Din 3P/ 5P/ 7P/ 8P, Phono and 6.35 mm Jack.
Read more
TC Electronic G Card Artist Preset Card for G-Force
 Add to cart
 2 in stock $94.43
Cat: 602398 Rel: 07 Mar 16
 
TC Electronic G-Card with 245 Custom Artist Presets - compatible with G-Force effects unit
Notes: TC Electronic G-Card with 245 Custom Artist Presets - compatible with G-Force effects unit
Read more
TC Electronic Switch 3 Remote Control
 Add to cart
 1 in stock $65.78
TC Electronic Switch 3 Remote Control (remote control switch)
Cat: 602391 Rel: 07 Mar 16
 
Remote Control For Nova System, BG250, BH250, BH550 & BH800
Notes: Control Is Everything:
You wanna push your gear to peak performance, squeeze every ounce of tone out of it and instantly recall the sounds you need. Switch-3 allows you to do just that with this ultra-robust control unit that is tailormade to give you extended control on your Nova System, Nova Drive, BG250 Bass Combo, BH250 Bass Micro Head, BH550 or BH800.

Nothing but sturdy hard-wearing quality known from other TC products built to endure life on the road. 3-button full-metal casing standard footswitch available for Nova System, giving you remote control of Nova System features such as preset up/down, bypass, effects mute, tap tempo, etc.

When using Switch-3 with BG250 the first switch operates as a mute. The second switches the TubeDrive on and off. The third switches TonePrint on and off.

When using Switch-3 with BH250 the first switch is mute. The second switches TonePrint on and off. The third switches between the two latest TonePrints loaded into the amp, giving you the option of storing and using two TonePrints.

Nova System - Switch Banks, Switch Presets

BG250 Bass Combo - Switch 1: Mute, Switch 2: TubeDrive on/off, Switch 3: TonePrint on/off

BH250 Bass Head - Switch 1: Toneprint 1 on/off (or toggle with Toneprint 2 if it is on), Switch 2: Toneprint 2 on/off (or toggle with TonePrint 1 if it is on), Switch 3: Mute - the power LED will blink when the amp is in mute mode.
Read more
TC Helicon Singles Connect Kit Audio & Power Accessory
 Add to cart
 1 in stock $46.16
Cat: 602521 Rel: 21 Mar 16
 
Audio & power kit for connecting TC Helicon vocal effect pedals in a chain - UK 3-pin adapter included
Notes: Audio power & accessory kit:
Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit - ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects.

Included:
- 12V, 1A power supply
- 3x DC daisy-chaining connectors
- 3x short XLR cables

*Photographed VoiceTone units are not included
Read more
TC Helicon Switch 6 Remote Control
 Add to cart
 1 in stock $69.24
TC Helicon Switch 6 Remote Control (remote control switch pedal)
Cat: 602395 Rel: 07 Mar 16
 
Six individual footswitches for remote control of programmable functions - with heavy duty road-proof construction
Notes: Even more remote control:
Switch-6 extends the control of compatible TC-Helicon vocal/guitar processors to fit your unique performance style and needs. The six footswitches can be customized for a multitude of functions, which will let you loop, toggle individual effects, change presets, engage HIT, or even use as a guitar pedalboard ...and more.

Creative command:
Create your own favorite control scheme, or use the preprogrammed setups on your unit. No matter what setup you choose, Switch-6 offers a handy shortcut for getting the sounds you want, when you want them. The durable design means that it won't quit before you do.

Remember to update:
Switch-6 requires the latest firmware to be installed on VoiceLive 3, VoiceLive Touch 2, or Play Electric. If you don't have it, you can download it for free via VoiceSupport - our free app for PC/Mac. Just follow the steps below:

- Download and install VoiceSupport
- Connect your TC-Helicon unit to your computer using the supplied USB cable
- Launch VoiceSupport
- After the updates have downloaded, click on the Firmware tab
- Click on the topmost firmware version. It will likely say "New" next to it
- Allow the update process to complete. DO NOT UNPLUG OR REBOOT YOUR UNIT.
- The device will come back to normal operating status on its own If you have trouble connecting to VoiceSupport, try the steps in this HELP FAQ.
Read more
TC Helicon VoiceLive 2 & 3 Padded Protective Bag
 Add to cart
 2 in stock $50.14
Cat: 602524 Rel: 29 Feb 16
 
Protective gigbag specifically designed to fit VoiceLive, VoiceLive 2 & VoiceLive 3
Notes: Keep your VoiceLive 3 & essential gig items in the same, protected place. This gig bag has been customized with padded soft protection for the original VoiceLive, VoiceLive 2, and VoiceLive 3.

Read more
Teenage Engineering OP1 Accessory Wallet (black)
 Add to cart
 1 in stock $15.92
Cat: 474697 Rel: 26 Nov 12
 
Accessory wallet for your OP-1 synthesizer.
Notes: Teenage Engineering wallet, finished in black, makes the ultimate accessory for your OP-1 synthesizer. Teenage Engineering wallet comes manufactured from hard wearing polyester and this soft case provides additional storage. OP1 wallet measures 85mm x 85mm, easily attaches to your OP-1 soft case and is perfect for storing all your OP-1 accessories.
Read more
Thats CDMH C60 Blank Compact Cassette Tape
 Add to cart
 4 in stock $4.77
Cat: 567758 Rel: 30 Mar 15
 
High quality suono format metal audio cassette tape
Notes: THAT'S CD-MH is a metal tape offering today's best "High Frequency" performance, making it the best tape available for "High Energy" music such as rock and symphonic utilising THAT'S "Super Alloy" for recording in the high/chrome position.
Read more
Tonar Demag Electronic Cassette Head Demagnetiser
 Add to cart
 6 in stock $24.39
Cat: 567753 Rel: 30 Mar 15
 
Cassette head demagnetising tool for use with compact cassettes only
Notes: The magnetic charge, which is generated on the recording- and playback heads during recording and playback is removed by this cartridge in electronic manner. Then the sound will be clear. Demagnetising takes only 2 to 3 seconds. As a check a little red lamp lights up during the process of demagnetising.

*Important! This product is only suitable to demagnetise equipment using compact-cassettes*
Read more
Tonar Tape Head Demagnetizer For Reel To Reel & Cassette Tape Recorders (220V, European plug)
 Add to cart
 6 in stock $19.09
Cat: 567759 Rel: 30 Mar 15
 
Tape head demagnetizer tool for removing magnetic electrical charge from reel-to-reel & cassette tape recorders
Notes: The unwanted magnetic charge, which is generated on the recording and playback heads during use is removed by this electronic, demagnetising wand in an electronic manner.

Once used effectively, the sound is clear. Demagnetising takes only 3 to 5 seconds for each head.

Important! As a very strong magnetic field is generated by this accessory, do not use it if you have a pace-maker and do not use in the close vicinity of friends or family with a pace-maker.

*This product has a european-style 2-pin plug*
Read more
Ultimate Support AMP150 Amp Stand
 Add to cart
 1 in stock $31.82
Cat: 528082 Rel: 05 May 14
 
Ultra compact, three-position tilt Genesis series amp stand with locking legs
Notes: The Ultimate Support AMP-150 is the perfect addition to the gigging guitar player's rig. Not only does it comfortably hold a small to mid-sized combo amp up to 75 lbs, but it's tilted (putting the sound where you need it instead of at your feet), AND it features a mic boom attachment making an additional mic stand obsolete!

There's no need to carry an additional mic stand when gigging with an AMP-150. There's a built-in mic boom attachment at the top of the height-adjustable stand! Just add your favorite boom arm (or a gooseneck) and microphone, and you're ready. Great for both live sound reinforcement or for recording in the studio.

Featuring three tilt positions, you can aim your amp exactly where you need it when using an AMP-150 amp stand. You'll be able to hear high frequencies at much lower volume levels on stage and in practice, and the sound guy will have better control over FOH sound since your amp is no longer facing directly forward.

The AMP-150 is one piece that quickly folds into an ultra compact, 3.5" x 18" unit. Take your stand anywhere and never lose parts again! And, the sturdy tripod base holds up to 75 lbs - it's the perfect addition to your small to mid-sized combo amp!

Genesis Series guitar and amp stands feature a unique, patented leg-locking mechanism. When setting up the stand, unlock the legs, unfold and lock the legs in place for worry-free stability and strength. When finished with the gig, unlock the legs, fold, and lock for easy, compact portability. The ingenious leg lock eliminates "floppy leg" syndrome.
Read more
Ultimate Support GS100 Single Electric Guitar Stand
 Add to cart
 1 in stock $29.18
Cat: 528067 Rel: 05 May 14
 
Foldable guitar stand with hanging-style security yoke
Notes: The first series of guitar stands that deliver true innovation and musician-helpful features, the Genesis Series from Ultimate Support all offer a patented leg-locking system for stability, protective padding that won't inherently damage the finish on your guitar, and handy guitar pick storage slots. Whether you're looking for a quality stand for your acoustic, electric, or bass guitar, or even your favorite combo amp, there's a Genesis Series stand from Ultimate Support for you!

Our unique hanging-style GS-100 guitar stand securely holds your guitar by the head stock while the body rests safely against velvet-like padded legs. A safety strap at the yoke provides extra protection. The GS-100 securely and safely holds guitars of all makes and styles!

The GS-100 is height adjustable so you can quickly adjust its height to accommodate nearly any acoustic guitar, electric guitar, banjo, or bass guitar. Mix and match the GS-100 with any of your favorite guitars - it holds them all perfectly!

All four GS Series guitar stands are incredibly compact and ready to follow you anywhere your next gig takes you. There are no parts to loose, because each stand is just one piece. The GS-1000, GS-100, and GS-200 all fold up into an extremely compact 3.5" x 21" size while the GS-55 is even shorter at just 3.5" x 14". Take your guitar stand with you wherever your guitar goes!

Did you know that most expensive guitars use a nitrocellulose lacquer finish that requires special care? Because of the sensitivity of these finishes, our protective padding is a quality material surface that offers increased protection over standard surgical tubing, rubber, or foam found on other guitar stands (a high-quality case is recommended for long-term storage).

Genesis Series guitar stands feature a unique, patented leg-locking mechanism. When setting up the stand, unlock and unfold the legs then lock in place for worry-free stability and strength. When finished with the gig, unlock the legs, fold, and lock for easy, compact portability. The ingenious leg lock eliminates what we like to call the "floppy leg syndrome" found with most all other guitar stands!
Read more
Ultimate Support GS1000 Guitar Stand With Clamping Neck Cradle
 Add to cart
 1 in stock $36.07
Cat: 528073 Rel: 05 May 14
 
Foldable guitar stand with Innovative self-closing neck mechanism
Notes: The first series of guitar stands that deliver true innovation and musician-helpful features, the Genesis Series from Ultimate Support all offer a patented leg-locking system for stability, protective padding that won't inherently damage the finish on your guitar, and handy guitar pick storage slots. Whether you're looking for a quality stand for your acoustic, electric, or bass guitar, or even your favorite combo amp, there's a Genesis Series stand from Ultimate Support for you!

When placed in the stand, your guitar's weight automatically and gently closes the yoke around the headstock of the guitar, cradling it safely and securely. And, you can easily remove the guitar without catching it on a messy cable or strap. The self-closing yoke is treated to not negatively affect the finish on your guitar.

Unlike most guitar stands, the GS-1000 is height adjustable to accommodate nearly any guitar, banjo, or bass guitar. So, whether you own a new electric guitar or bass, acoustic guitar or banjo, the GS-1000 is the perfect guitar stand for you!

Genesis Series guitar stands feature a unique, patented leg-locking mechanism. When setting up the stand, unlock and unfold the legs then lock in place for worry-free stability and strength. When finished with the gig, unlock the legs, fold, and lock for easy, compact portability. The ingenious leg lock eliminates what we like to call the "floppy leg syndrome" found with most all other guitar stands!

The GS-1000 is one piece that quickly folds into a small, 3.5" x 21" unit. Take your stand anywhere and never lose parts again! It'll fit into most gig bags, backpacks, and messenger bags. With the GS-1000, you don't have to sacrifice having a secure stand for portability!

Did you know that most expensive guitars use a nitrocellulose lacquer finish that requires special care? Because of the sensitivity of these finishes, our protective padding is a quality material surface that offers increased protection over standard surgical tubing, rubber, or foam found on other guitar stands (a high quality case is recommended for long-term storage).
Read more
Ultimate Support GS200 Single Acoustic & Electric Guitar Stand
 Add to cart
 1 in stock $32.88
Cat: 528072 Rel: 05 May 14
 
Foldable guitar stand with patented leg locking system
Notes: The first series of guitar stands that deliver true innovation and musician-helpful features, the Genesis Series from Ultimate Support all offer a patented leg-locking system for stability, protective padding that won't inherently damage the finish on your guitar, and handy guitar pick storage slots. Whether you're looking for a quality stand for your acoustic, electric, or bass guitar, or even your favorite combo amp, there's a Genesis Series stand from Ultimate Support for you!

Like the GS-100, our unique hanging-style GS-200 guitar stand securely and safely holds your guitar by the head stock (a safety strap provides extra protection). However the GS-200 also has support arms for more traditional use. The arms fold down from the legs to hold your instrument and fold up for streamlined portability.

All four GS Series guitar stands are incredibly compact and ready to follow you anywhere your next gig takes you. There are no parts to loose, because each stand is just one piece. The GS-1000, GS-100, and GS-200 all fold up into an extremely compact 3.5" x 21" size while the GS-55 is even shorter at just 3.5" x 14". Take your guitar stand with you wherever your guitar goes!

Did you know that most expensive guitars use a nitrocellulose lacquer finish that requires special care? Because of the sensitivity of these finishes, our protective padding is a quality material surface that offers increased protection over standard surgical tubing, rubber, or foam found on other guitar stands (a high quality case is recommended for long-term storage).

Genesis Series guitar stands feature a unique, patented leg-locking mechanism. When setting up the stand, unlock and unfold the legs then lock in place for worry-free stability and strength. When finished with the gig, unlock the legs, fold, and lock for easy, compact portability. The ingenious leg lock eliminates what we like to call the "floppy leg syndrome" found with most all other guitar stands!
Read more
Ultimate Support MCTB200 JamStands Tripod Mic Stand With Telescoping Boom
 Add to cart
 6 in stock $30.76
Cat: 528683 Rel: 16 Jun 14
 
Tripod microphone stand with telescoping boom and metal die-cast housing
Notes: The JS-MCTB200 Mic Stand with Telescoping Boom has a tripod base for stability and an adjustable height of 40" to 68". The telescoping boom adds additional flexibility for making sure you're able to place your microphone exactly where you need it.
Read more
Yamaha MG124C / MG124CX Padded Carrying Bag
 Add to cart
 1 in stock $51.99
Cat: 527669 Rel: 05 May 14
 
Soft padded gig bag for Yamaha MG124C and MG124CX compact mixers
Notes: Yamaha SCMG12 gives you a 'tough as nails' armour padded soft case designed specifically for the MG12 range of compact mixers. The newly designed Yamaha SC-MG12 padded case offers storage, protection and transportation for MG series mixers.

Branded with the Yamaha logo, SC-MG12 features additional storage in the form of a separated front pouch ideal for storing leads and power adaptors and ensuring those all important accessories are always to hand.
Read more
Items 1 to 49 of 49 on page 1 of 1
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close