Skip Navigation

Secure shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

Equipment

Equipment

 
Release Date
View:
Options
Items 51 to 89 of 89 on page 2 of 2
« | 1 | 2
Rode WS8 Deluxe Wind Shield For NT5 NT55 & NT6
 Add to cart
 1 in stock $21.96
Cat: 509388 Rel: 25 Nov 13
 
Deluxe quality windshield for the Rode NT microphone range
Notes: The RODE WS8 Deluxe Windshield is an easy to use high-performance windshield for RODE's most popular small diaphragm condenser microphones, the NT5, NT55 and NT6.

Designed to reduce wind noise when recording in adverse environmental conditions, the WS8 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.

The WS8 supports microphones of 20mm diameter and 27mm capsule depth.
Read more
Rode WSVM Pop Filter Wind Shield for Rode VideoMic/NTG1/NTG2 Microphones
 Add to cart
 2 in stock $13.50
Cat: 485690 Rel: 25 Mar 13
 
Pop filter & windshield designed for the Rode VideoMic, NTG-1 and NTG-2
Notes: The WSVM windshield provides additional protection for the microphone capsule against any wind noise or plosives.
Read more
Rycote AV Softie Kit
 Add to cart
 1 in stock $130.19
Rycote AV Softie Kit (microphone accessory kit)
Cat: 592993 Rel: 23 Nov 15
 
Microphone accessory kit
Notes: Classic Softie:
Industry leading standard slip-over Windshield affording max. wind noise attenuation of 25dB. Renowned for its performance and durability in the harshest environments worldwide.

InVision 7 HG MKIII - virtually indestructible shock mount with industry leading Lyre technology:

- Lyres offer professionals the cleanest possible sound.
- Highly efficient cable clamp isolates cable born noise.
- No elasticated parts - never sags or needs re-threading.
- Consistent performance over changes in temperature and humidity unlike elastic suspensions, means you can take it anywhere and it will still perform.
- Tilt/swivel head allows multi-positioning of mic for optimum audio pick up.
- Universal mic clamp fits any mic with a diameter from 19/34mm. A soft rubber sleeve allows effective holding on the mic, no matter if it is cylindrical or 'slab sided'.
- Designed to support front heavy mics or mics with a slip over Windshield.

Hot Shoe 3/8" Adaptor:
Screws into base of InVision 7 HG MKIII to allow mounting onto a camcorder/camera hot-shoe or via the 1/4" female thread to a tripod etc., for self shooting operations.

Soft Grip Extension Handle:
Ergonomic soft grip handle with 3/8" male thread at top and 3/8" female thread at bottom allows it to attach to suspensions, and then to mount those on a boom pole or mic stand or to comfortably hold whilst performing pieces to camera.

This kit is compatible with a wide range of mics (see below):

Rode NTG-1
Rode NTG-2
Rode NTG-4
Read more
Rycote Baseball 3" Windscreen (black, 19/20mm)
 Add to cart
 1 in stock $41.57
Cat: 639577 Rel: 27 Feb 17
 
Durable windscreen specifically designed for interior boom pole use - 19/20mm
Notes: Minimise the 'Swoosh' when booming!

This ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.

Mic compatibility (19/20mm):

- DPA 4018
- Schoeps CMC Series
- Sennheiser MKH 8040, 8050
Read more
Rycote Baseball 3" Windscreen (black, 24/25mm)
 Add to cart
 1 in stock $34.29
Cat: 639581 Rel: 27 Feb 17
 
Durable windscreen specifically designed for interior boom pole use - 24/25mm
Notes: Minimise the 'Swoosh' when booming!

This ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.

Mic compatibility (24/25mm):

- Sennheiser MKH 40, MKH 50
Read more
Rycote Baseball 3" Windscreen Triple Pack (black, 19/20mm)
 Add to cart
 1 in stock $91.46
Cat: 639582 Rel: 27 Feb 17
 
Pack of 3 durable windscreens specifically designed for interior boom pole use - 19/20mm
Notes: Minimise the 'Swoosh' when booming!

This ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.

Mic compatibility (19/20mm):

- DPA 4018
- Schoeps CMC Series
- Sennheiser MKH 8040, 8050
Read more
Rycote Foam Microphone Windshield 104401 (18cm) For Shotgun Microphones
 Add to cart
 1 in stock $21.57
Cat: 456435 Rel: 02 Jul 12
 
18cm standard hole SGM foam
Notes: The Rycote 104401 18cm Standard Hole SGM Foam is ideal for protecting your shotgun microphone from the elements, especially wind noise.
Read more
Rycote Foam Microphone Windshield 104410 (12cm) For Shotgun Microphones
 Add to cart
 1 in stock $17.66
Cat: 456433 Rel: 02 Jul 12
 
12cm standard hole foam
Notes: The Rycote 104410 12cm Standard Hole SGM Foam is ideal for protecting your shotgun microphone from the elements, especially wind noise.
Read more
Rycote Invision Broadcast INV 7 Suspension Mount 041107 For Condenser Microphones 19-25mm
 Add to cart
 1 in stock $48.84
Cat: 456403 Rel: 02 Jul 12
 
STD Lyres long bar with 2 x 19/25mm clips
Notes: The Rycote InVision range of microphone suspension mounts is an ideal solution for sound recording engineers who require a discrete low profile support for small to medium length microphones. The InVision suspensions all use the new patented Lyre suspension system developed by Rycote. The Lyre suspension uses no runner or elastic components to isolate the microphone from unwanted shocks and handling noises, instead the design of the shape allows a specific compliance to the microphone, and so prevents the handling noise reaching the capsule. The materials used within the Lyres allow the working temperature of the suspension to far exceed any elastic or rubber shock mount or suspension. The operating temperatures for the Lyres is quite extreme and ranges from minus 35-celcius to over 100- celcius.

They are suitable for a wide range of microphones including compact and medium bodied, and microphone series which use remote capsules. The InVision range retains all the flexibility, balance and professional performance that you can expect from a Rycote microphone suspension.

The Rycote 041107 INV-7 is comprised of 2 x 70mm wide standard lyres with integral 19/25mm clips fitted to a large size support bar. This mount is considered to be one of the most universal in the InVision range, being suitable for a wide range of condenser microphones having a shaft diameter of 19mm to 25mm.
Read more
FORTHCOMING
Rycote InVision INV Lite 19 Boom Shock Mount
e-mail me when released
coming soon $TBA
Cat: 642448 Rel: 17 Mar 17
 
Boom shock mount with cam-lever clamp - designed for shorter, lighter shotgun mics
Notes: The INV Lite is the new addition to the Rycote InVision range of boom shock mounts. Specifically designed for popular short-shotgun microphones, for indoor boom pole recordings, the unique 'cam-lever' design grips the mic at its rear without covering the interference tube slots. This allows for easy use of a foam windscreen, without the need to modify or cut the foam first.

Choose the 19mm model for the DPA 4017B, 4017C & 4018; the Sanken CS-1e and Sennheiser MKH8060, MKH8050, 8040 &8020.
Read more
FORTHCOMING
Rycote InVision INV Lite 21 Boom Shock Mount
e-mail me when released
coming soon $TBA
Cat: 642449 Rel: 17 Mar 17
 
Boom shock mount with cam-lever clamp - designed for shorter, lighter shotgun mics
Notes: The INV Lite is the new addition to the Rycote InVision range of boom shock mounts. Specifically designed for popular short-shotgun microphones, for indoor boom pole recordings, the unique 'cam-lever' design grips the mic at its rear without covering the interference tube slots. This allows for easy use of a foam windscreen, without the need to modify or cut the foam first.

The 21mm version fits the Schoeps MiniCMIT.
Read more
Rycote Mini Windjammer 055413 For Tascam DR07 MKII
 Add to cart
 1 in stock $36.37
Cat: 468353 Rel: 24 Sep 12
 
Compact slip-on fur windjammerr for Tascam DR07 MKII
Notes: Rycote's Mini Windjammer range has expanded tremendously in recent years with the introduction of compact slip-on fur windjammerr for the growing numbers of portable handheld digital recorders, as used by journalists, podcasters and broadcasters everywhere. These devices are now available in such a range of shapes, sizes and types (mono and stereo), that slightly different custom windjammerr designs are needed for each one; over a dozen types are currently available. If you want to make professional-quality recordings outdoors for TV, radio or film use on a handheld recorder, get yourself one of Rycote's Mini Windjammerr.

The Rycote Mini Windjammer for Tascam DR-07mkII is a lined slip-on faux fur cover designed for use with the Tascam DR-07mkII digital recorder. It has a windshield rating of medium that provides approximately 30dB of reduction from the effects of high-gust wind noise and vocal plosives. The Mini Windjammer can be used over a foam windscreen or on its own. A touch fastener strap secures the cover in place.
Read more
Rycote Mini Windjammer For Rode Videomic Pro Microphones
 Add to cart
 4 in stock $39.49
Cat: 578977 Rel: 20 Jul 15
 
Mini windjammer for use when capturing audio in high-wind environments
Notes: The Mini Windjammer for Rode Video Mic Pro with Rycote Lyre provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, it slips over the foam windshield provided with the Rode Video Mic Pro with Rycote Lyre for additional wind protection with virtually no additional loss of high-frequencies.

Note: This product is specifically designed for the Rode Video Mic Pro with Rycote Lyre. It is not designed for use with other Rode Video Mic models.

Main Benefits:

- Record, interview or broadcast in any weather
Read more
Rycote OverCover Lavalier Wind Cover & Stickies (30 Uses & Re-Useable Fur Covers)
 Add to cart
 6 in stock $10.38
Cat: 484678 Rel: 18 Mar 13
 
Adhesive pads and covers for use with Lavalier microphones in windy conditions
Notes: Overcovers have been specifically designed for use with small personal microphones in windy outdoor conditions. Using stickies to affix the Lavalier mic onto the skin or on top of clothing, Overcovers also include a fur windjammer to be adjusted on top of the Lavalier microphone for excellent wind-noise protection.
Read more
Rycote Rode VideoMic Mini Windjammer
 Add to cart
 2 in stock $30.13
Rycote Rode VideoMic Mini Windjammer (microphone accessory)
Cat: 614698 Rel: 11 Jul 16
 
Mini micropgone windjammer for Rode VideoMic original with Rycote Lyre
Notes: The Mini Windjammer for the Røde VideoMic Original with Rycote lyre onboard provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.

Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.

Note: This Mini Windjammer is specifically designed for the Røde VideoMic Original with Rycote lyre onboard.
Read more
Rycote Stickies Lavalier Mic Adhesive Mounts x 100
 Add to cart
 2 in stock $20.53
Cat: 484749 Rel: 25 Mar 13
 
Pack of 100 Stickies for mounting lavalier microphones on skin or clothing
Notes: Stickies are double-sided adhesive pads, used to affix small, personal microphones directly onto the skin or on top of clothing. The pads are sandwiched with a soft fabric to prevent the mount from creaking when the mic is attached. The materials used are hypoallergenic.
Read more
Rycote UnderCover Lavalier Wind Cover & Stickies (Pack Of 100 Grey)
 Add to cart
 1 in stock $25.98
Cat: 484751 Rel: 18 Mar 13
 
Pack of 100 Grey undercovers for use with Lavalier microphones under clothing
Notes: Designed specifically for use with Lavalier mics under clothing. Using Stickies to affix the microphone, a soft fabric disc is then added on top to minimise the sounds of clothing rustle and low wind noise. Undercover Packs contain Stickies and fabric discs, and are available in white, grey and black colours.
Read more
Rycote Video Hot Shoe Extension (10cm)
 Add to cart
 1 in stock $30.13
Cat: 484752 Rel: 18 Mar 13
 
Hot shoe extension for additional lights of microphones
Notes: The Hot Shoe Extension allows you to fit multiple attachments such as lights and additional mics to your single hot shoe on your camera or camcorder. Because the Hot shoe Extension can rotate 360- around the shoe fixture on the camera, your microphone can be easily moved out of shot and also adjusted to achieve the optimum balance. This essential, yet affordable accessory is a must for all videographers.
Read more
Samson MD5 Desktop Microphone Stand
 Add to cart
 1 in stock $16.62
Samson MD5 Desktop Microphone Stand (microphone accessory)
Cat: 484101 Rel: 15 Apr 13
 
Desktop microphone stand suitable for broadcast or interview applications
Notes: Desktop Microphone Stand

Read more
Samson SP01 Spider Shockmount for C01/C03/CL7/CL8/C01U Microphones
 Add to cart
 1 in stock $39.48
Cat: 484104 Rel: 11 Mar 13
 
Condenser microphone shock mount
Notes: A spider-style suspension microphone shockmount designed for use with the C01, C03, CL7, CL8 and C01U condenser mics.
Read more
Samson SP01 Spider Shockmount for C01/C03/CL7/CL8/C01U Microphones (B-STOCK)
 Add to cart
 1 in stock $36.90
Cat: 642755 Rel: 11 Mar 13
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


A spider-style suspension microphone shockmount designed for use with the C01, C03, CL7, CL8 and C01U condenser mics.
Read more
Sennheiser Tie Clip Clamp For ME2 Microphone (083387)
 Add to cart
 2 in stock $6.23
Cat: 451153 Rel: 23 Apr 12
 
Microphone clip
Notes: Tie clip for Sennheiser's radio microphone system, with 3.5mm jack and locking connection.

Read more
Shure A25DM Microphone Clip For SM58/SM57/SM87A/Beta 87A & All MIcs With 3/4" Or Larger Handles
 Add to cart
 2 in stock $5.72
Cat: 440878 Rel: 21 Nov 11
 
Microphone clip for Shure SM58 SM57 SM87A Beta 87A & all other microphones with round 3/4" and larger handles
Notes: The A25D is a break resistant stand adapter for the Shure SM58, SM57, SM87A, Beta 87A and all other microphones with round 3/4" and larger handles.
Read more
Shure RK143G Replacement Microphone Grille For SM58 (silver)
 Add to cart
 2 in stock $9.34
Cat: 440883 Rel: 21 Nov 11
 
Replacement grille for the Shure SM58 wired microphone & SM58 wireless handheld transmitters
Notes: Replacement grille for the Shure SM58 wired microphone and SM58 wireless handheld transmitters.
Read more
Shure RPM646 Microphone Boom & Cable Assembly (black)
 Add to cart
 1 in stock $154.86
Cat: 440882 Rel: 09 Jan 12
 
Microphone assembly with 4 pin mini connector (TA4F)
Notes: Shure RPM646 Microphone Boom & Cable Assembly is designed for Beta 54 and WBH54B. It comes with Shure headphones microphone wireless mics. The cable terminates to a TA4-Female connector.

Read more
Sound LAB 22mm Internal Diameter Foam Microphone Windshields (black, pack of 3)
 Add to cart
 1 in stock $1.25
Cat: 491017 Rel: 13 May 13
 
Pack of 3 black foam microphone windshields with an internal opening of 22 x 50mm
Sound LAB Desk Microphone Stand With Round Base & Microphone Clip (black)
 Add to cart
 2 in stock $7.80
Cat: 634500 Rel: 09 Jan 17
 
Black microphone desk stand
Notes: Microphone stand with a heavy black cast base. Supplied with microphone clip.
Read more
Sound LAB Desk Microphone Stand With Tripod Base
 Add to cart
$2.03 SAVE 10%
 9 in stock $1.82
Cat: 559392 Rel: 02 Feb 15
 
Short length desktop microphone stand with tripod base and included microphone clip
Notes: This short microphone stand with a tripod base is designed for mounting lightweight microphones and is supplied with a microphone clip.

The microphone stand allows you to mount most microphones on any flat surface so is ideal for studio or home use and the small size makes it perfect for use when you're out and about in different locations.

Having a stand for your microphone can improve the ease of picking up sound and improve quality.
Read more
Sound LAB Pop Shield With Adjustable Clip (black)
 Add to cart
 4 in stock $4.68
Cat: 559396 Rel: 02 Feb 15
 
Adjustable pop shield for reducing breathe noises in vocal recording
Notes: This Soundlab pop shield can be easily connected to most microphone stands and the flexible neck of 4" (10 cm) allows the shield to be adjusted to the right position.

This pop shield can enhance the noise clarity when recording and eliminates popping sounds. Perfect for Studio, home recordings.
Read more
Sound LAB Studio Microphone Reflexion Screen (black)
 Add to cart
 1 in stock $66.47
Cat: 559388 Rel: 12 Jan 15
 
Microphone isolation screen with microphone stand attachments, and adjustable side panels
Notes: A well designed studio sound isolation screen which can be stand alone or can fit onto most stands that have tube diameter from OD 15mm to OD 28mm.

A feature of this screen is that the left and right panels can be adjusted to give the best sound protection and as a result improves voice recording quality. Ideally in home studios, rehearsal studios or other untreated acoustic locations, isolating the mic from unwanted reflections and resulting in a closer, drier sound.

Screens only, does not include microphone, shock mount holder, headphones or stand.
Read more
Sound LAB Telescopic Desk Microphone Stand With Round Base & Microphone Clip (black)
 Add to cart
 1 in stock $9.25
Cat: 634499 Rel: 09 Jan 17
 
Height adjustable desk microphone stand
Notes: Height adjustable heavy cast base desk microphone stand, supplied with a microphone clip.
Read more
SoundLAB Microphone Stand Carry Bag With Two Strap Handles & Zipper (black)
 Add to cart
 4 in stock $3.64
Cat: 484355 Rel: 11 Mar 13
 
Lightweight microphone stand carry bag (black)
Notes: High quality Black Fabric Microphone Stand Carry Bag With 2 Strap Handles and Zipper
Read more
Tascam TM AG1 Pop Filter
 Add to cart
 1 in stock $18.97
Tascam TM AG1 Pop Filter (microphone pop filter)
Cat: 638684 Rel: 13 Mar 17
 
Microphone pop filter with dual-layer nylon screen & side air vents
Notes: TM-AG1 is a pop filter that that helps to achieve cleaner vocal recordings. It consists of a dual-layer nylon screen with side air vents that effectively reduces plosives and protects the microphone from saliva. With its gooseneck clamp, it can be easily attached to the mic stand and adjusted in a variety of positions.
Read more
TC Helicon VoiceLive Touch Microphone Cable
 Add to cart
 1 in stock $8.47
Cat: 602520 Rel: 07 Mar 16
 
88cm XLR microphone cable designed for use with Voicelive Touch
Notes: The Touch Microphone Cable is a premium quality cable designed with the right length when used with a VoiceLive Touch and a microphone boom stand.
Read more
Ultimate Support JamStands FB100 Fixed Length Boom Arm
 Add to cart
 2 in stock $8.67
Cat: 528690 Rel: 05 May 14
 
Fixed length microphone boom arm accessory for Ultimate Support JamStands
Notes: Instantly turn any mic stand into a boom stand with the JS-FB100 Fixed-length Microphone Boom Arm! The all-metal housing is powder coated for scratch resistance and the fixed boom arm will stand up to day-in/day-out use.
Read more
Ultimate Support MMS1 JamStands Table Top Mic Stand
 Add to cart
 1 in stock $9.87
Cat: 528688 Rel: 16 Jun 14
 
Mini desktop tripod microphone stand ideal for broadcasting, podcasting or talkback use
Notes: When it comes to miking seated speakers, you need the right tool for the job. The Mini Desktop Tripod Mic Stand fits the bill perfectly, boasting a solid base for stability and an adjustable height of up to 10".

The powder-coated finish keeps the Mini Tripod Table-top Mic Stand/Clip looking good through years of use.
Read more
Ultimate Support Pro TT Tripod Base & Telescoping Boom Microphone Stand
 Add to cart
 4 in stock $95.60
Cat: 526938 Rel: 16 Jun 14
 
Microphone stand with patented quarter-turn clutch and oversized steel tubing - tripod base/standard height/telescoping boom
Notes: The Pro Series microphone stands from Ultimate Support are designed for the gigging musician, working engineer, and professional venue. They are the workhorse of the Ultimate Support line of microphone stands featuring field-replaceable parts that are strong and durable, an easy-to-use, comfortable clutch, and a scratch-resistant finish that will not rust. The Pro Series mic stands are available with tripod, weighted, and stackable bases; short, and regular heights; and, with or without telescoping or fixed-length boom arms. There's a Pro Series mic stand for all needs!

All Pro Series microphone stands feature oversized, thick, steel tubing and rubber foot caps that won't fall off. What's more, Pro Series mic stands resist scratches and won't rust thanks to a heavy-duty, strong (20 times stronger than the competition), Powder Coated finish.

The patented Quarter-Turn Clutch on the Pro Series microphones is a super smooth design that locks and unlocks with only a quarter turn of the clutch handle. It's an over-molded clutch that delivers a secure grip that locks up faster and smoother than any other clutch on the market.

Whether you're performing in the States or over seas, a Pro Series microphone stand is the only stand you'll need. The top threads fit both US- and metric-threaded mic clips and accessories for use all around the world.

The majority of the parts on Pro Series microphone stands can be field serviced with replacement parts as needed over their VERY long lifespan. So, instead of replacing the entire stand when a part fails, as you have to do with competing products, with a Pro Series mic stand, you simply replace the affordable part and move onto the next gig!

The durable and strong, black, chrome-plated die-cast tripod base on the Pro series microphone stands is up to 30 times stronger than the competition's base. And the super strong tripod legs securely snap into place for easy storage and quick setup and take down.

The new Ulti-Boom mic boom features an oversized rotation hub, the place on a boom where everything comes together. Ultimate Support's center hub is the largest on the market, increasing friction, and reducing any chance of slipping. Adjust it once and forget about it! And, the Ulti-Boom features a true metal counter-weight that provides true balance on the boom.
Read more
Ultimate Support QR1 Quick Release Microphone Stand & Clip Adapter
 Add to cart
 1 in stock $29.40
Cat: 526918 Rel: 05 May 14
 
Quick-release adapter for microphone stands and microphone clips
Notes: Taking advantage of a ball bearing / dual flat wall fitting that makes an extra tight, super quiet connection, the QR-1 is the perfect tool for expeditious swapping of microphones in the studio or on stage. The bottom half threads onto a 5/8" microphone stand while the top half threads into a 5/8" threaded microphone clip. To disconnect the two, simply pull down on the lower half's molded grip while lifting up on the top half!
Read more
Ultimate Support QR1 Quick Release Microphone Stand & Clip Adapter (B-STOCK)
 Add to cart
 1 in stock $21.53
Cat: 644412 Rel: 05 May 14
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Taking advantage of a ball bearing / dual flat wall fitting that makes an extra tight, super quiet connection, the QR-1 is the perfect tool for expeditious swapping of microphones in the studio or on stage. The bottom half threads onto a 5/8" microphone stand while the top half threads into a 5/8" threaded microphone clip. To disconnect the two, simply pull down on the lower half's molded grip while lifting up on the top half!
Read more
Items 51 to 89 of 89 on page 2 of 2
« | 1 | 2
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close