New releases last eight weeks: All genres

Notes: Use this cable to connect your Bluebox to a data source and a power source at the same time. This will allow you to stream audio over USB. The cable has a USB B male connection on one end and two USB B female connections on the other end: red for power and black for data.

Stream Audio Over USB with Bluebox

If you bought a Bluebox for desktop before September 2023, this handy adapter will make it easier to connect your device to a computer. New firmware allows you to send audio from the bluebox to the computer and back.

The adapter splits the power from the USB signal to help avoid noise from your computer. It also enables you to power the device separately in case your computer or hub is not suitable for the demanding power requirements of the Bluebox.

Connect the male end to the USB Power port on your Bluebox. Then connect your bluebox USB B power cable to the red female jack, and a USB B data cable to the black female jack and you are ready to stream audio.

Specs

Length: 3.25", 8.25 cm

Weight: 1.2 oz, 34 grams
Dimensions: 6.5 × 2.5 × 0.75 in

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: These are 6" (15cm) right angle patch cables for Eurorack. Colour is pink, pack of 5 cables.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: These are skinny (sometimes called noodle) patch cables for Eurorack. This is a pack of five cables, size 6", pink in colour.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: These are right angle patch cables for Eurorack. Size is 12 inch (30cm), colour is green.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: This is a pack of five, 12" skinny patch cable for Eurorack. Colour is green.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: This is a pack of five, 18" skinny patch cables for Eurorack. Colour is blue.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: This is a pack of five, 24" skinny patch cables for Eurorack. Colour is black.

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: The latest update of Arturia's legendary plugin collection, featuring 39 instruments, three expansion packs and over 9,000 presets. New instruments include CP-70 V, MiniFreak V, Acid V and three Augmented collections.

Supplier's Notes:
V Collection X

Reference instruments for music makers
A premium suite of software instruments for unparalleled sonic exploration; from evocative emulations and hybrid synth engines, to authentically modelled keyboards and beautifully captured acoustic sounds - enhanced for today's production workflow.

This is V Collection X

Immerse yourself in an unparalleled music-making experience with iconic sounds and essential tools to suit your style, performance needs and production workflow. 39 instruments, 3 exclusive expansion packs, thousands of world-class presets - 1 canvas for infinite sonic exploration.

The ultimate selection

A hand-picked, expertly-engineered suite of instruments combining timeless sonic craft with cutting-edge enhancements that seamlessly integrate with demanding production workflows. The most iconic synths, blissful keyboards, evocative hybrids and faithfully captured acoustic instruments for endless inspiration, vivid composition and boundless play.

10,000+ presets

Find the crucial mix-finishing sounds you need in a few clicks with V Collection X's expansive library of expertly-designed sounds, complete with easy browsing. Tap right into any style, any instrument, any time.

Easy to use

You don't need to be an expert to enjoy professional sound. The instruments in V Collection X are designed with accessibility in mind, equipped with intuitive interfaces, interactive in-app tutorials, and intelligent features that deliver electrifying results without hassle.

Perfected for you

High-performance features that you can count on, premium sound quality you deserve; V Collection X is the result of over 20 years of engineering innovation, musical exploration, and a passion for audio excellence and expressivity.

39 Software titles

Augmented WOODWINDS
Augmented GRAND PIANO
Augmented BRASS
Augmented STRINGS
Augmented VOICES
Korg MS-20 V
SQ80 V
CS-80 V
Prophet-5 V
Prophet-VS V
Piano V
Analog Lab V
Vocoder V
Jun-6 V
OP-Xa V
Mellotron V
Synthi V
CZ V
CMI V
Clavinet V
Acid V
MiniFreak V
CP-70 V
DX7 V
Buchla Easel V
Synclavier V
Emulator II V
B-3 V
Mini V
Stage-73 V
Matrix-12 V
Farfisa V
Solina V
SEM V
Jup-8 V
ARP 2600 V
VOX Continental V
Wurli V
Modular V

Platform specifications

Windows

Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
32GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Required configuration

Works in Standalone, VST, AAX, Audio Unit, NKS* (64-bit DAWs only).

Apple

Mac OS 11.0+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or Apple Silicon CPU
32GB free hard disk space
OpenGL 2.0 compatible GPU

Work with ASC

An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

Notes: Nine zip cable ties in 3 different colours. Light Grey, Dark Grey, and Red. Each pack contains 3 cable ties of each colour.

Notes: Looping and sampling combine in a fun new way with this beautifully designed digital 'tape music instrument' from Chompi Club. Record, perform, loop and overdub with built-in effects. Cute but powerful.

Supplier's Notes:
CHOMPI is a quirky, chromatic sampler and tape music instrument, inviting you into the magical world of sound design. With its unique stereo sampling engine, expressive multi-effects and varispeed "tape" style looper; CHOMPI is ready for immediate fun.

Special care was taken with sourcing quality materials for CHOMPI's hardware, but many aspects of the platform have also been designed with user customization in mind. The modular panel enclosure, MX mechanical key switches & keycaps, and DJ style encoder knobs can all be customized and retrofitted by the user to match their own unique style.

CHOMPI's workflow is designed to be user-friendly and accessible to individuals of all experience levels... So whether you've been playing music for years, or are just starting your sonic journey, CHOMPI just might become your new favourite buddy!

Features

Unique screenless workflow utilizes rgb LED indicators
Endless push button encoders for multi-page parameter controls
Two octave chromatic keyboard utilizes MX Cherry switches
3 selectable sampling sources
Built-in microphone
Stereo Aux input
Resample master output signal
Minimal, yet capable sound design engine:
Sample playback speed & direction control
Sample start & end point control
Sample attack & release/decay envelope
Single knob multi-FX section
Pg 1 Magic Wand: combo delay + reverb
Pg 2 Tape Saturation: w/ wow & flutter
Pg 3 Multi-Mode Filter:
Varispeed tape-style looper
Transport knob provides control over loop playback speed & direction, as well as manual tape scrubbing when loop is paused
Overdub decay controls allow for "frippertronics" loop composition techniques
Real time audio thru mode for live FX and loop recording
Two types of sample playback engines: chromatic & 1-shot
7 Voice Polyphony
84 Slots to Save/Recall Presets (3 banks of 14 slots per engine)
~6hrs of sample storage capacity on Micro SD card
16-bit, 48kHz stereo audio I/O
USB-C and rechargeable battery power
Built-In Microphone
3.5mm Stereo Aux Input
3.5mm Stereo Line Output
3.5mm Headphone Output
3.5mm and/or USB-C Midi In & Out

Specs

Dimensions: 13" Wide x 4.5" Deep (without Handle) 5.75" Deep (with Handle) x 2.5" Tall (table/surface to top of encoders)
Weight = 2lb 3oz
Recommended USB power brick spec: 5V / 2A (or higher)
Manufactured in California, USA

Included In The Box

1x CHOMPI Sampler (Classic Black & Gold Colorway)
1x USB-C Cable
1x Quickstart Guide
1x CHOMPI Sticker

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: The double stand is intended to house two Behringer synthesizers, with the ability to improve the operating position on both.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The stand includes rubber feet so it won’t scratch or slip.

It is compatible with Model D, K2, Pro 1, Neutron, Cat, Wasp

Notes: If you have Behringer TD3 machines in your studio, this is the ideal stand.

Designed and designed exclusively for the Behringer TD3, it may be more comfortable, more spacious and maintains your equipment 100% safe and stable.

All our supports, keep adherent feet 3m behind them so that the support does not loosen.

Notes: This specially designed stand for Elektron Digitakt / Digitone is attached from below to the equipment’s chassis, utilizing its universal VESA mounting points, enabling the use of the equipment in a much more ergonomic inclined position.

By swapping the position of the feet, it is possible to use the equipment in two different positions: lying down and upright.

It can be set up in a matter of seconds and weighs just a few grams.

Each stand features a groove to accommodate silicone feet to prevent the equipment from slipping or scratching.

Includes both side stands, screws for installation, and silicone feet.

Notes: For two Make Noise desktop units

Suitable for 0-Coast, 0-Ctrl and Strega

Made of biocompatible PLA plastic

Connection of the side parts via wooden rods

Colour: Black

Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.

The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.

Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.

Notes: Protective cover and inclined stand. All in one piece. On one side, it's a cover that protects the OP-1, shielding keys, screen, and knobs. But leaving the side connectors uncovered, so you don't have to unplug it to cover it.

It also provides the option to use it as an inclined stand for the OP-1, simply by reversing its position. Fitting snugly around the perimeter of the synthesizer.

The cover is decorated to resemble the recording view of the OP-1.

***The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

Notes: ***B-STOCK: Box opened, internal packaging damaged but product in perfect working order***


Four-deck version of Denon's standalone controller, based on the Engine DJ OS, featuring WiFi streaming and Serato support. Built-in speakers allow quick and easy monitoring for live streaming or practice sessions.

*** Engine DJ 3.1 Performance Software for Hardware (OS) - Update June 2023 ***

New Features

Touch FX - Use the touchscreen to control and interact with FX in a whole new way. Touch FX bring powerful effect combinations to your fingertips. Swipe in any direction to instantly create build-ups, drops, and transitions. The added ability to latch Touch FX allows you to focus on other aspects of your mix while the effect remains active. Touch FX are available for all Engine DJ devices, including Media Players, however, the selection of available Touch FX will vary by the device.

New Touch FX include: Filter Echo, Filter Reverb, Filter Roll, LFO Echo, Filter Dub Echo, Filter Gate, Noise Gate, Flanger, LFO Filter, Filter

New Main FX - Denon DJ devices receive 26 new and updated Main FX. This suite of new dynamic effects provides DJs with easy-to-use tools to build energy, create drama, aid with transitions, and individualize their performances.

New Main FX include: Echo Out, Swell Verb, Hold Echo, Recycler, Stutter Out, Riser, Pitch Down, Scale Down, Reverb, LFO Verb, Reverb Drop, Reverse Reverb, Reverb Rise, Flanger (-), Beat Break, Backspin, Brake, Roll

All effects now offer a Frequency parameter, allowing you to apply the effect to a focused frequency range.

Sampler Updates

Sampler audio can be routed to any available channel or the Main output. To change the Sampler routing, open Settings and choose the Mixer tab.
The Sampler pad mode can now also be accessed by pressing the ROLL pad mode button twice without holding the Shift button. (Denon DJ hardware)
The sampler volume setting is now remembered between power cycles.
Added the ability to read Smartlists created in Engine DJ (Desktop).

Improvements and Fixes

Track Preview can now be routed directly to the headphones for instant track previews without setting the cue source in advance. (PRIME 4)
Reworded Effect parameter reset behavior setting to make it clearer.
Fixed an issue where the Date Added field was incorrectly setting newly added tracks as the day before.
Fixed an issue where the internal SATA drive would not show up as a source immediately after updating.
Fixed an issue where a track remained in the Prepare list when loading to a deck in certain situations.
Improved peak hold behavior on all products that have peak hold VU meters.
Other various stability enhancements & improvements

Engine DJ Preparation Software (Desktop)

New Features

Smartlists - Automatically organize songs from all connected drives into playlists based on the criteria or rules that you specify. To create a Smartlist, click the Smartlist icon on the Collection folder or right-click on an existing Playlist and select 'Create Smartlist'. You can easily turn a Smartlist into a regular playlist by right-clicking the Smartlist and choosing 'Convert to Playlist'. This creates a Playlist with the same name & content as the Smartlist.

Improvements and Fixes

Fixed an issue that prevented the highlighted track from updating when bulk editing metadata.
Fixed an issue where the Date Added field was incorrectly setting newly added tracks as the day before.
Fixed an issue where Serato beat grids were not imported correctly.
Other various stability enhancements & improvements

Supplier's Notes:
Denon DJ, the leader in standalone DJ products and innovation, introduces the SC LIVE 4, a 4-Deck Standalone DJ Controller with 7" touchscreen, built-in speakers, and Wi-Fi connectivity. This club-style, all-in-one device gives DJs ultimate creative freedom and offers the world's first DJ hardware integration with Amazon Music Unlimited.

World's First Amazon Music and Denon DJ Partnership

The Denon DJ SC LIVE DJ controllers were designed using an exclusive secure chipset to meet Amazon Music's streaming requirements, making them the world's first DJ hardware to support Amazon Music Unlimited. This integration with Amazon Music and other popular streaming services gives DJs instant access to over 90 million CD quality (aka "lossless") songs across all musical genres. With the SC LIVE 4's built-in Wi-Fi and lightning-fast onboard song analysis, DJs can now perform a full set without owning or preparing any music ahead of time.

Laptop Free Performances with Engine DJ OS

The SC LIVE 4 is powered by Engine DJ, the same leading standalone DJ operating system that fuels laptop-free performances on the biggest stages and DJ booths across the globe. This seamless hardware and software integration intuitively places performance essentials in the perfect place for inspirational mixes and live shows. The dedicated Layer buttons provide quick access to the controls of each of the 4 playing decks with the waveforms stacked in channel order on the full-color touchscreen. Vital information including the deck number, track position, bpm, and time are brightly shown in the center of the 6", high-definition touch-sensitive jog wheels.

Ultimate DJ Controller for Serato DJ and Virtual DJ

With "Computer Mode" enabled, the SC LIVE 4 can be used as a dedicated DJ software controller for Serato DJ Pro and Virtual DJ. This 1:1 hardware to software integration displays moving waveforms and music library information on the HD touchscreen and provides full access to FX and other top features. This versatility gives DJs multiple options to perform however they prefer.

Designed for Creative Mixing

The SC LIVE 4 gives DJs the power to perform anywhere with 4-deck standalone freedom and wireless access to Amazon Music Unlimited. This combination of performance features and unprecedented musical access opens an exciting new realm of creative mixing possibilities for laptop-free DJ performances. Inheriting the professional club-standard layout, features, and intuitive workflows from Denon DJ's flagship SC6000 PRIME media players and club-style mixers, the SC LIVE 4 fuses the power of the club-ready modular setup into a compact & intuitive 4-deck standalone DJ controller. With its built-in Wi-Fi, 7" multi-gesture touchscreen, and 3 media slots, the SC LIVE 4 unleashes creative live performances using a combination of stored media and music streaming sources.

For on-the-fly creative mixing, the 8 Performance Pads on each deck can be used to control Hot Cue, Auto Loop, Manual Loop, Roll, Slicer, and Slicer Loop modes. The onboard effects include 4 Sweep FX which utilize a dedicated knob on each channel to expressively control FX and Filter combinations. The 13 BPM FX options can be customized for extra sonic satisfaction using the FX control section which includes a Channel Assignment knob, Time/Parameter control, FX level encoder, and illuminated engagement button.

Immersive All-In-One Audio Experience

The powerful, built-in speakers offer the perfect sound solution for livestreaming, practicing, content creation, and personal monitoring during live shows. The dedicated volume knob and on/off switch offers full control to meet the needs of any gig, making it easy for DJs to bring the booth with them wherever their career takes them.

Dynamic Lighting Integration

For enhanced performance visuals, the onboard Engine DJ operating system is fully integrated with Engine Lighting. A quick button press lets DJs instantly access automatic and pre-programmed, beat-synced light shows for songs stored on saved media as well as for streaming tracks. Full parameter controls over color, intensity, strobe, and more can be adjusted on the fly for jaw-dropping light shows using Phillips Hue, Nanoleaf, and DMX lighting.

The fully loaded, fully capable SC LIVE 4 represents the next generation of standalone DJ controllers and is sure to inspire a new era of musical freedom and creativity.

Technical Specs

Audio

Frequency Range: 20-20,000 Hz
Sampling Rate: 44.1 kHz
D/A Converter: 24 bit

Physical Unit

Dimensions (W x D x H): 28.3 x 15.9 x 3.9 Inches
Weight: 12.8 lb

Compatibility

Software

Engine DJ OS
SoundSwitch
Virtual DJ
Serato DJ

Hardware

Denon DJ LC6000 Performance Expansion Controller
SoundSwitch Micro USB to DMX Interface
SoundSwitch Control One Professional Lighting Controller

Onboard Internet Services
Amazon Music Unlimited
Beatport
Beatsource
Dropbox
SoundCloud GO+
TIDAL

Included Contents
Quick Start Guide
DC Power Supply
USB Cable
Display Cleaning Cloth
Safety & Warranty Manual

FAQ's


Do other Engine DJ products work with Amazon Music Unlimited?

No. A hardware change was needed in order to support this technology.

Does the SC LIVE 2/4 work with an Amazon Music Free or Amazon Music Prime account?

No. The SC LIVE 2/4 only supports Amazon Music Unlimited.

What audio quality does Amazon Music Unlimited support?

Amazon Music Unlimited offers 75 million tracks in lossless High Definition (HD) and millions more in Ultra High Definition (Ultra HD). HD tracks are 16-bit audio, with a minimum sample rate of 44.1 kHz (16/44.1 is also referred to as CD-quality), and an average bitrate of 850 kbps. Ultra HD tracks have a bit depth of 24 bits, with sample rates ranging from 44.1 kHz up to 192 kHz, and an average bitrate of 3730 kbps.

How many Amazon Unlimited tracks can I stream simultaneously?

Amazon Unlimited allows for up to two tracks to be streamed simultaneously. That includes tracks loaded to decks or previewed from the library.

Notes: Dtronics DT-1000, A hardware controller for the Roland Boutique D-05 and D-50/D-550

The Dtronics DT-1000 is a hardware controller for the Roland Boutique D-05 and D-50/D-550.

The DT-1000 can also be operated on a vintage Roland D-50 / D-550

Almost every parameter of the Roland D-05 gets its own slider, 10 keys and 56 pots in a nice and solid desktop case.

Some pots are doubly assigned, but can be switched quickly and are very easy to read.

For Roland Boutique D-05 Linear Synthesizer
Also compatible with Roland D-50 and D-550 vintage synthesizers
Direct access to all important parameters of the Roland Boutique D-05
10 Buttons and 56 pots
Robust housing
MIDI input and output
USB

Included in the box:
Dtronics DT-1000
DIN(5) MIDI cable
USB cable


Specifications
Material: high-quality plastic
Height: 44 mm
Width: 300 mm
Depth: 200 mm
Weight: 0.985 gram
DIN cord (DIN5P) is included
Power consumption USB or DIN: 60mA

Notes: PERKONS HD-01 is a unique live performance and sound design instrument that tears down the borders between drum machine, synthesizer, and drone instrument.

PERKONS features four sonically versatile hybrid voices (digital sound engine + analogue multimode filter with overdrive) and a sequencer with simultaneous control over all four percussion tracks.

Each voice has 3 sound engine modes, an HP/BP/LP filter and 8 controls for nuanced sound design, including an internal BBD FX send. All voice parameter settings can be saved as KITS. To add dynamics to the performance, parameter automation is implemented and a modulation LFO can be assigned to all parameters.

For a real thunderstorm, integration with external gear is considered - each voice has a dedicated trigger input, individual output, and FX send and return with 6.3mm jack sockets, along with extensive MIDI implementation. All voices are summed and run through a built-in compressor.

Time to ride the skies!

Erica Synths are pleased to see the enjoyment the PERKONS has brought to users worldwide over the past two years! To celebrate its success, they have decided to transform the beast by giving it a new demeanour - a timelessly black finish to match Erica Synths' other instruments and to visually complement the dark aesthetic that has become synonymous with Erica Synths modules and desktop instruments all over the world.

Notes: Future Retro's unique modern take on vector synthesis takes full advantage of an impressive hybrid synth engine. Digital oscillators, ring modulation and complex envelopes meet a multi-mode analogue filter with paraphonic capabilities. Quirky and flexible.

Supplier's Notes:
The Vectra is a unique hybrid synthesizer with a flexible architecture that allows many different forms of synthesis to be realized. It's the best of both worlds... The Vectra utilizes digital oscillators, ring modulators, noise sources, vector mixer, LFO's, complex envelopes, and modulation routings providing many capabilities that would be very difficult to produce with analogue circuitry alone. This allows for accurate tuning, repeatability of complex patches, and patch storage. The Vectra also provides a multi-mode analogue filter, VCA, and final output, as these provide the best sonic qualities.

The Vectra includes a powerful and fun sequencer and arpeggiator, with many new capabilities. Although the Vectra is a self contained instrument, MIDI can be used to interface with other devices.

The Vectra provides four oscillators, white and pink noise sources, four ring modulators, a four-channel mixer, five LFO's, six morphing envelopes, six primary multimode analogue filter types, a main analogue VCA, and numerous internal modulation routings and VCA's controlling modulation amounts.

It really is like having a powerful self-contained semi-modular synthesizer with approximately 500 internal signal routings, and around 256 storable sound parameters.

The synthesizer architecture is designed to allow the greatest flexibility in recreating multiple synthesis techniques of the past while introducing several new innovations. The sound section has been inspired by features of the greatest synthesizers ever made, while not focusing specifically on recreating any instrument in particular. The Vectra is in fact it's own unique self-contained instrument.

The oscillators are digital as this provides the highest degree of tuning stability, while allowing both virtual analogue and digital waveform generations. With features like oscillator Sync, PWM, the new waveform Phase Slice, and Fade features, independent glide times per oscillator, constant beat detuning, and paraphonic voice modes, not to mention FM, AM, ring-modulation, and dedicated LFO's, envelopes, and VCA's per oscillator really make these oscillators a power house.
The four-channel mixer is unique in that it provides an even balance when mixing multiple sources, either manually with the joystick, or applying automated vector mixing, or mixer modulation.

The five LFO's provide 500+ waveforms to choose from, with their frequency spanning from sub-audio into the audio range. Their frequency can be stationary or track keyboard notes with glide. Waveforms can sync to any waveform phase at a note-on, and they can be frequency modulated as well. In short they can be used as LFO's, complex envelopes, or audio rate oscillators.

OSCILLATORS (1-4)
Frequency Range: <0.01 Hz to 20.00 kHz
Analogue Modelled Waveforms: Sine, Triangle, Sawtooth, Square, Pulse Width Modulated
Pulse Width Range: 1% to 99%
Pulse Width Modulation Sources: Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y,
LFO, Envelope
Digital Waveforms: 500
Number of Digital Waveforms per Oscillator: 2
Waveform Modulation Types: PWM, Slice, Fade
Waveform Start: 0 to 255 samples
Waveform Modulation Sources: Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y,
LFO, Envelope
Waveform Modulation Amount: 0 to 100
Octave Range: -7 to +5
Pitch Tuning: Semitones
Fine Tuning: 128 steps per semitone
Constant Beat Detuning: -/+5.00Hz
Paraphonic Modes: 8 total
Sync: Off/On, 0-360 degrees
Glide Time per Oscillator: 0ms to 14.7 seconds
Key Tracking: On/Off

OSCILLATOR FREQUENCY MODULATION (1-4)
Modulation 1 Source: LFO
Modulation 1 Control: Off, Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, LFO,
Envelope
Modulation 2 Source: Envelope
Modulation 2 Control: Off, Randon1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, LFO,
Envelope

Modulation 3: Randon1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, Filter LFO, Filter Envelope, Amplifier Envelope

Total Modulation Range: 0.5 to 10 octaves
Individual Modulation Amounts: -99 to 100

LFO (1-4, Filter)
Analog Modelled Waveforms: Sine, Triangle, Ramp, Sawtooth, Square, Random
Digital Waveforms: 500
Waveform Start: 0 to 255 samples
Initial Frequency Range: 0.001 to 1001Hz (greater with key tracking and modulations)
Fine Tuning: 128 steps per semitone
Key Tracking: On/Off
Sync: Off/On, 0-360 degrees
Frequency Modulation Sources: Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y,
LFO, Envelope, Filter LFO
Total Modulation Range: 1 to 10 octaves
Modulation Amount: -99 to 100

41

ENVELOPES (1-4, Filter, Amplifier)
Initial Envelope Stages: Delay, Attack, Hold, Decay, Sustain, Release, Repeat/Loop
Modulated Envelope Stages: Delay, Attack, Hold, Decay, Sustain, Release, Repeat/Loop
Normal Envelope Contours: 5
One-Shot Envelope Contours: 4
Looping: On/Off with repeat time
Envelope Times per Stage: 0ms to 14.7 seconds
Sustain Level: 0 to 100%
Key Sync: on/off (retriggering)
Attack Reset: Off/On
Time Modulation Sources: Off, Random1, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y

MIXER
Channels: 4
Audio Sources:
Oscillator (1-4)
Oscillator (1-4) controlled by Envelope (1-4)
Oscillator (1-4) controlled by LFO (1-4)
Ring-Modulation of Osc 1&2, Osc 2&3, Osc 3&4, Osc 4&1
White-Noise
White-Noise controlled by Envelope (1-4)
Pink-Noise
Pink-Noise controlled by Envelope (1-4)
Mixer Types: Manual, Envelope, One-Shot, Key-Synced, Free-Running, Modulated
Automix X:Y Location Stages: 4
Automix Stage Times: 0ms to 14.7 seconds
Mod Mix X:Y Location Stages: 2
Mod Mix Control Sources: Off, Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y,
LFO, Envelope
Mod Mix Sources: Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, LFO, Envelope,
Filter Envelope
Mod Mix Amount: 0 to 100
Output Gain: 1.00x to 5.00x

ANALOG FILTER
Primary Filter Types: 4p low-pass, 2p low-pass, 1p low-pass, 2p band-pass, 2p high-pass, 2p notch
Filter Frequency Range: approximately 20 Hz to 20 kHz
Resonance: 0 to 100
Key Tracking: Off/On
Modulation 1 Source: LFO
Modulation 1 Control: Off, Random1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, LFO-4,
Filter Envelope
Modulation 2 Source: Envelope
Modulation 2 Control: Off, Randon1/2, Key1/2, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, LFO-4,
Envelope-4
Modulation 3: Randon1/2, Key1, Velocity, Aftertouch, Mod-Wheel, Stick X/Y, DC+, Mix-1, Mix-2,
Mix-3, Mix-4, LFO-1, Env-1, Amplifier Envelope
Individual Modulation Amounts: -99 to 100
42

ANALOGUE AMPLIFIER (see also Envelope parameters)
Additional Envelope Type: Drone

Envelope Amplitude Modulation Control: Off, Random1/2, Key1/2, Velocity, Aftertouch, Mod-
Wheel, Stick X/Y, LFO-4, Envelope-4

KEYBOARD / SEQUENCER
Keys: 29
Scales: 29
Linear Transpose: -12 to +16
Scale Transpose: -12 to +16 notes
Octave Reiterations: -3 to +3
Tempo: 10 to 250 BPM
Swing: 50% to 75%
Sequencer Modes: Play, Arpeggiate, Fill, Edit, Real-time, Auto
Max Steps per Sequence: 16
Sequencer Parts: Pitch, Velocity, Rhythm (Note-On/Off, Glide, Sustain)
Time Signatures: 1-4, 2-4, 3-4, 4-4, 6-4, 8-4
Directions: Down, Up/Down, Up, Random, (plus 25 complex directions)
Loop Point: 1 to 16 steps

MEMORY
Max Number of Sounds and Sequences: 999
Global Parameters Saved: Output level, MIDI Channel, Fine Tuning, Screen Saver Time, Last File

MIDI
Channels: 1-16
MIDI Messages Supported: Note-Pitch, Note-On/Off, Velocity, Aftertouch, Pitch-Bend, Mod-Wheel,
MIDI Sync: Clock, Start, Stop

OTHER
Input/output: 15V DC input, MIDI (IN/THRU/OUT), 1/4" unbalanced Audio Out
Unit Dimensions: (width) 18.25" x (depth) 11.0" x (height) 3.5"
Unit Weight: 5.0 lbs
Power: 15V DC (centre-pin positive) rated at 1 Amp current.

Notes: Holds everything you need

Very high-quality and durable padded gig bags for transporting your semi-modular synth cargo. Sized specifically for Cascadia.

The padded main compartment protects your case from bumps and scratches.
Zipped outer pocket for stuffing accessories and other gear.
The rear pocket closes with velcro at the top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.
Super beefy strap connectors with clipped strap.
Lightweight with a single-handle design

Notes: Polycarbonate Protection

Transparent polycarbonate lid for the Cascadia made by Decksaver. Keep your synth patched and dust-free:

Clearance to leave your Cascadia patched with a Lid attached.
Perfectly sized to fit with Cascadia in our Cascadia Gig Bag.
Lightweight and rigid.
Made by Decksaver UK with smokey polycarbonate.

Notes: Want to create the perfect filter sweep, manually trigger a gate or step through a sequencer? No more need to turn knobs or to patch up a lot of modules, the Kommander makes it simple: just plug it into a CV input on your (modular) synthesizer, move your hand over the device and you are able to control it with your hands, feet or nose, yes: just like a theremin: Kommand and Konquer!

The Kommander is a handheld dual infrared X-Y motion controller that makes controlling your electronic instruments intuitive and fun. The device measures the distance to your hand or any other surface and sends out corresponding CV signals between 0 and 8V. The closer you have your hand to the Kommander, the higher the output voltage. This will allow you to create complex synth sounds, trigger a drum machine, control your Koma effect pedals or any other instrument that is capable of receiving CV signals.

Koma know that some equipment can only accept CV signals up to 3V or 5V, that's why they fitted the Kommander with attenuators, which are accessible in the back of the unit. The attenuators connected to the CV outputs allow you to attenuate the maximum voltage output, so you can e.g. set the range from 0V to 5V instead of 0V to 8V.

Because of the innovative circuit design there is no interference from sunlight or stage light, so the musician can use it wherever she or he wants. Just plug the Kommander into your Eurorack Modular System, Buchla, Moog, Roland or any other synthesizer and create.

Notes: Part of Mackie's ProFXv3+ series, this six-channel model offers great value, with built-in audio interface, Bluetooth streaming and GigFX+ effects.

Supplier's Notes:
Mackie ProFX6v3+ is a professional 6-channel analogue mixer and USB-C audio interface featuring Onyx preamps and EQ, switchable USB recording modes, Bluetoothr for capturing phone calls and upgraded effects you can adjust on a colour LCD screen.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. Our award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetoothr channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Product features
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetoothr for music playback and caller integration
2-band EQ on channels 1 and 2
One-button compression on channels 1 and 2
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 5/6
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line inputs: 6
Mic inputs: 2
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording modes: Yes
Bluetooth w/MixMinus: Yes

Notes: Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock moulded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

Fits

Ableton Push 3
Ableton Push 2
Ableton Push

Specs

Outer measures: 43 x 37 x 10,5 cm
Inner measures: 39 x 33 x 5 cm
Weight: 1,3 kg

Notes: Honey is a palm-sized, touch-based noise instrument based on the bytebeat principle. It runs on a single AAA battery and emits sound through a speaker. It doesn't have an audio jack. It creates dynamic sounds by manipulating variables and mathematical operations through touch.

The internal dynamic equations consist of five variables and four operations, with six possible operators for each operation. They are constantly changing and forming new equations, creating chaotic randomness.

If the unit does not respond correctly, the battery needs to be replaced.

Powered by one AAA battery

Notes: Zeus Guitar Pedal Power Supply

NU-X have built an enviable reputation as guitar pedal experts and great guitar sound starts with the power source. Using standard 9Vdc power adaptors usually releases unwanted noise into the signal chain and unstable power can adversely affect the operation and even life expectancy of some boutique pedals. Zeus is an extremely low noise, high current power supply designed specifically for audio effect circuits with 6 fully isolated 9V outlets, 3 switchable 9/12/18V outlets and a fully variable 6-12V outlet. This lightweight and efficient power supply has the flexibility and reliability to run a full pedal board, even with multi-effect units added, with problem-free operation.

Extremely low noise circuitry
Fully isolated outputs
Multiple voltage options
High current capacity
Supplied with various DC link cables to havndle most pedal input types
Supplied with a 2-outlet combiner lead with 2.5mm DC plug for higher power units.

Power supply: 100-240Vac, 50/60Hz (IEC)
Outputs: 6 x 9VDC, 3 x 9/12/18vDC, 1 x 6-12Vdc variable (all DC5521 jack)
USB output current: 1.5A (Type-A outlet)
Dimensions: 195 x 101 x 42mm
Weight: 658g

In the box

The box for this item contains :

Zeus guitar pedal power supply
5 x DC jack link cables (5.5x2.1mm) straight to angle 0.5m
5 x DC jack link cables (5.5x2.1mm) straight to angle 0.3m
1 x DC jack reverse polarity cable (5.5x2.1mm) straight to angle 0.5m
1 x DC jack (5.5x2.1mm) to 3.5mm plug cable 0.5m
1 x twin DC jack (5.5x2.1mm) socket to single DC plug (5.5x2.5mm)
1 x IEC power lead

Notes: Keyboard version of Pittsburgh's superb Taiga synth, combining Moog-style East Coast elements with Buchla-inspired West Coast synthesis. Premium 37-key model with velocity, aftertouch and 24 HP expansion bay.

Supplier's Notes:
Modern Analogue Keyboard with Expansion Bay

Taiga Keyboard is an evolution of the award-winning Taiga synthesizer. Taiga gave users a boundary-smashing suite of unique modern Pittsburgh Modular analogue synthesizer innovations. Now in Taiga Keyboard, that same powerful suite of tools acts as a foundation in this expressive keyboard instrument.

Exploring the larger keyboard format, spreading controls out, and adding larger knobs makes sound sculpting while performing easier than ever. We've also added additional modulation sources, additional controls, a full-size 37 key premium aftertouch-enabled keybed, and a first-of-its-kind, modular expansion bay.

Taiga Keyboard oscillators

Waveforms generated by the three Taiga Keyboard oscillators stretch beyond the basic geometric shapes and sounds associated with analogue synthesis. Taiga Keyboard waveforms pass through up to three proprietary, cascading waveshapers designed to precisely manipulate their symmetry and harmonic content. In addition, each oscillator includes a robust six-stage wave folder to add even more complexity and depth to the diverse sonic palate of Taiga Keyboard. Dedicated coarse and fine controls deliver maximum flexibility & control over the full range of each oscillator.

The "Pittsburgh Filter"

The Pittsburgh filter has defined the sound of Pittsburgh Modular from the moment it was introduced. A signature gummy and relaxed sound with no dead spots that has been tweaked to perfection. It offers a warm, smooth sweep through the full frequency range and a sweet resonance that does not roll off the low end. This generation of the Pittsburgh filter is specifically designed to ensure a remarkable interplay with Taiga Keyboard's oscillators.

Pittsburgh Dynamics Controller

Pittsburgh's new Dynamics technology imparts Taiga Keyboard with a uniquely organic depth and presence. By simultaneously managing both amplitude and harmonic content, the Pittsburgh Dynamics Controller expands beyond the one-dimensional VCA found in other synthesizers. It does this by utilizing new advancements from traditional low pass gates to add additional definition and dimension to the voice of Taiga Keyboard.

When used in low pass gate mode, sounds shed harmonic content and become warmer as they decrease in volume. This mimics how sound waves react to their environment. Because of this connection, the Taiga Keyboard sounds more natural or complex compared to other instruments.

Analogue Echoes

Echos is a beautifully dark analogue delay tuned to enhance the source material by repeating it over and over. Echos utilizes a pair of bucket brigade delay chips to produce a classic voltage-controllable analogue delay effect that helps to place the sounds of Taiga Keyboard in a simulated environment.

Open Architecture

Taiga Keyboard has an internally defined signal path. Patch cables are not necessary to begin exploring. Attach a midi keyboard and plug the output into a speaker or DAW and Taiga Keyboard is ready to go with a robust but familiar workflow. When your ideas grow beyond the pre-defined signal path, a 64 point patch bay opens up a fully modular instrument with access to an even deeper set of features and tools.

Modular Expansion Bay

Staying true to our modular roots, we've added a 24hp powered eurorack Modular Expansion Bay that lets you personalize your Taiga Keyboard to your sound and performance needs. Simply remove the metal plate that covers the bay and add eurorack compatible modules. The modular bay helps you make Taiga Keyboard's sound completely your own.

Complete Set of Modular Tools

Taiga Keyboard includes a host of fully modular, analogue, and digital synthesis tools to support and enhance its core functionality. Analog tools include a flexible dual mixer, a pair of plucky four-stage envelope generators, noise, and sample and hold. Digital tools cover external MIDI, arpeggiator, clock sync'd modulation tools, and a robust collection of random generators. The Taiga Keyboard toolset is deep enough for any type of sonic exploration.

Keybed and additional MIDI control

Taiga Keyboard as its name would suggest, has an integrated 37 key keyboard with aftertouch, as well as pitch bend and modwheel. The keyboard can be used as a separate USB / Din MIDI controller using the Local On/Off modes.


Taiga Keyboard's key range can be easily changed using the dedicated octave up and down buttons that are located adjacent to the pitch bend and modwheel.

Taiga Keyboard features and other info:

Paraphonic synthesizer with unique additive elements
37 note aftertouch equipped keybed with full-sized keys
Fully patchable - use Taiga Keyboard's components as separate modules with external devices or reroute its internal patching.
24hp powered Eurorack Modular Expansion Bay
64 point patch bay for rerouting internal signal flow and integrating external sound and modulation sources
Controllable via MIDI, CV, and integrated pseudo random sequencing mode

Notes: The Magnetic Mount is a versatile magnetic mounting system for attaching microphones, lights and other accessories to any MagSafer iPhoner or other smartphone with a magnetic case. It features an ultra-strong magnet for complete security, even with vigorous use, and comes with three removeable attachments for maximum flexibility. This includes both short and long cold shoe arms for shooting in landscape or portrait mode, plus a long arm for mounting your smartphone onto a tripod, handle or desktop arm for use in a wide range of video or content creation applications.

Mechanical specifications- Magnetic Mount

Weight (grams): 75
Dimensions (millimetres):
Length: 57
Width: 12
Height: 57

Mechanical specifications- long cold shoe arm

Weight (grams): 15
Dimensions (millimetres): Length: 22
Height: 97

Mechanical specifications- short cold shoe arm

Weight (grams): 9
Dimensions (millimetres): Length: 22
Height: 52

Mechanical specifications - 14 inch tripod mount

Weight (grams): 31
Dimensions (millimetres): Length: 28
Height: 113

What's in the box

1 x Magnetic Mount
1 x Long Cold Shoe Arm
1 x Short Cold Shoe Arm
1 x 1/4-inch Tripod Mount

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: A workhorse studio condenser microphone with a warm, silky character, exceptionally low noise and high SPL handling - ideal in a wide range of studio applications.

The World's Most Popular Studio Microphone

Since it launched over 30 years ago, the NT1 has become the world's most popular studio microphone and the go-to for countless creators across the globe - from bedroom musicians and studio professionals to streamers, podcasters and voice over artists. The NT1 Signature Series carries on this legacy, delivering classic studio sound for today's creators.

Iconic Signature Sound

Featuring our stunning HF6 1-inch true condenser capsule, the NT1 Signature Series boasts the same iconic sound signature that its forebears are revered for. Sparkling top end, highly detailed midrange, and rich, warm bass make it shine in almost any recording application you can imagine - from vocals, piano and acoustic guitar to drums, percussion and electric guitar.

Your Mic, Your Way

For the first time in the NT1's 30-year history, this iconic microphone is available in a range of iconic colours. This limited-edition collection features five vibrant colourways alongside the timeless black finish, including red, green, purple, pink and blue.

A True Workhorse

A true workhorse that excels in a wide range of studio applications. With an exceptionally low noise floor and incredibly high max SPL, it captures everything from whispers to drums with the utmost clarity. The perfect all-rounder studio microphone.

Legendary RODE Quality

The NT1 Signature Series is designed and made using the highest-grade components in RODE's precision manufacturing facilities in Sydney, Australia. It's built to last, with a rugged body machined from high-grade aluminium and comes with our industry-leading 10-year warranty, so you can rest assured it will remain your go-to for the long haul.

Premium Accessory Kit

Keep your recordings pristine with the studio-grade shock mount and pop filter included with the NT1 Signature Series, the perfect tools for minimising audio artifacts caused by knocks, rumbles and plosives. It also ships with a premium XLR cable so you can start creating right away - just plug straight into your audio interface or mixer and start recording exceptional audio.

Key Features

Large-diaphragm cardioid condenser microphone
HF6 1-inch true condenser capsule, precision engineered to sub-micron tolerances
Tight cardioid polar pattern for excellent background noise rejection
Classic NT1 sound signature - rich, warm bass, detailed midrange and sparkling highs for exceptional performance in a wide range of studio applications
Smooth frequency response and high sensitivity for incredible balance and clarity
Extremely low noise (4dBA) - the world's quietest studio condenser microphone
High SPL handling capabilities (142dB) for capturing very loud sound sources
Studio-grade shock mount and pop filter and premium XLR cable included
Available in classic black or a range of limited-edition colours, including red, green, purple, pink and blue
Rugged aluminium body with a high-grade finish - incredibly resistant to scuffs and scratches
Industry-leading 10-year warranty
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia

Acoustic & Electrical Specifications

Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Capsule: 1.00"
Polar Pattern: Cardioid
Address Type: Side
Frequency Range: 20Hz - 20kHz
Output Impedance: 100O
Maximum SPL: 142 dB SPL
Equivalent Noise (A-Weighted): 4dBA
Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
Analogue Power Requirements: P48
Analogue Output Connection: 3-pin XLR

Mechanical

Weight (grams): 313

Dimensions (millimetres)
Length: 52
Width: 52
Height: 189

What's in the Box
1x NT1 Signature Series
1x SM6
1x XLR Cable

Notes: Turn your smartphone into a professional filmmaking rig with the RODE Phone Cage. This magnetic mobile filmmaking cage features an ultra-secure mounting system for attaching a MagSafer iPhoner or other smartphone with a magnetic case. Five cold shoe mounts allow for easy mounting of a wide range of accessories, including microphones and lights, with in-built cable management ensuring your rig stays neat and tidy. Conveniently placed 14-inch and 3/8-inch threads facilitate connecting even more accessories, including handles and tripods, allowing you to customise it to your needs. The Phone Cage is made from lightweight aluminium and is incredibly rugged, perfect for outdoor use and run-and-gun filmmaking.

Magnetic mobile filmmaking cage
MagSafer compatible
In-built cable management slots
Five cold shoe mounts for attaching microphones and lights
14-inch and 3/8-inch threads for use with tripods, handles and other accessories
Facilitates portrait and landscape shooting

Mechanical specifications

Mounting Options:
Cold Shoe Mounts: 5
Standard 1/4-inch Thread: 14
ARRI 1/4-inch Thread: 17
3/8-inch Threads: 2

Weight (grams): 285
Dimensions (millimetres):
Length: 245
Width: 35.5
Height: 126

What's in the box

1 x Phone Cage
1 x Magnetic Phone Mount
1 x Locking Screw

Notes: The SC27 is a high-quality SuperSpeed USB-C to USB-C cable designed to connect devices that require fast data transfer speeds to your computer. It measures 2 metres in length and is capable of 5Gbps transfer speeds and 60W power delivery, making it ideal for use with high-performance devices. Available in a range of colours, including black, orange, red, purple, pink, green and blue.

High-quality SuperSpeed cable with up to 5Gbps data transfer and 60W charging
2m (6'6") long
Output Connection: USB-C
Input Connection: USB-C

Weight (grams): 28.7g
Dimensions (millimetres): Length: 2000mm

Notes: The VESA Mount is a sturdy adjustable mount for products fitted with VESA mounting screws, such as the RODECaster Pro II and RODECaster Duo. It features a locking ball head that can rotate 360 degrees for easy manoeuvring of the device in any orientation.

The mount attaches to any standard microphone stand or studio arm, and is the perfect way to position your device in a range of scenarios.

Note - not compatible with the original RODECaster Pro.

Suits both 100 and 75mm VESA mounts
360-degree ball head mount
Easy-to-use cam to lock in any position
Attaches to any standard microphone stand or sudio arm

Mechanical specifications

Weight (grams): 400g (including screws)
Dimensions (millimetres):
Length: 140
Width: 140
Height: 90
Compatible RODE Products: RODECaster Pro II, RODECaster Duo