The Shure N447 Stylus is for use with Shure M44 & M44-7 cartridges.
With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.
More than 10 in stock $72.61
Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
The only difference between the two models is that the M44-7-H comes pre-mounted on a Technics headshell virtually eliminating set up time. The M44-7 does not include a headshell so one will need to be provided in order to use the cartridge on your turntable. Both models include one stylus and an accessory kit that features a headshell screwdriver, stylus cleaning brush and headshell weight.
The Shure N-WHLB is a truly revolutionary piece of DJ technology. Tailored for the club environment, the White Label features sonic characteristics including solid drop bass, flat mids and accented highs. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact and improved stylus visibility.
Whilst there are cheaper record cleaning brushes available on the market, the Spin Clean Record Washer system is by far the best in terms of removing dust, fingerprints and static from your LP records.
The kit comprises fluid bath, a 4oz bottle of cleaning fluid, lint-free drying cloths, 1 pair of brushes, 1 pair of rollers and an instruction manual.
Spin Clean Record Washer System Mk II achieves amazingly effective cleaning power of records due to the special cleaning fluid that grabs hold of the dirt and makes it sink to the botton of the fluid tank, ensuring that your records remain uncontaminated during the cleaning process. Both sides of the record are sleaned at the same time by the Spin Clean Record Washer System Mk II.
The cleaning process is as follows: fill the bath with cleaning fluid, Spin the record three times, then dry off the record with the lint free cloths. Simple and effective. There are no power requirements for the Spin Clean Record Washer System Mk II.
This gauge is exclusively designed for Technics direct drive player systems which come with attached tonearm.
This should not be used with the model SL-110 or SL-120 motor units.
More than 10 in stock $64.46
The M44G is a versatile performance needle, appropriate for both intensive scratching and mixing.
More than 10 in stock $118.13
Tailored for the club environment, the Whitelabel features sonic characteristics including solid drop bass, flat mids, and accented highs. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact and improved stylus visibility.
Offering outstanding performance and value, the Special Edition SE215m+SPE Sound Isolating Earphones with Remote + Mic takes performance, connectivity and durability to a new level. Single dynamic Micro-Drivers provide detailed audio and enhanced bass in a stylish and distinctive white finish.
An integrated three-button remote and microphone offers convenient device and playback controls from the detachable, replaceable cable. Each pair is made to exacting, industry-renowned Shure quality standards and built to withstand the rigors and abuses of everyday life.
- Single dynamic Micro-Driver earphones with detailed sound feature an acoustical network tuned for extended bass performance.
- Detachable, replaceable, 50" Kevlarr-reinforced cable with MMCX connectors extends product life.
- Soft-touch integrated remote and microphone controls device playback, volume, and sound for calls and voice control apps.
- Apple-certified Made for iPhone features: Controls playback, volume and calls, and use with SIRI; Play Music, Pause Music, Volume Up/Down, Skip to Next Track, Skip to Previous Track, Restart Current Track, Fast-forward, Send/End Call, SIRI, Take Photo; 1/8" Stereo connectors compatible with Apple-certified protective cases; Some features work with iOS devices only; Android compatibility is device-dependent.
- Comfortable, Sound Isolating sleeves block up to 37 dB of outside noise; Passive sound isolation for uncoloured, artefact-free sound.
- Ergonomic earphone housing sits comfortably in the ear for hours of listening.
- Wireform cable moulds to wearer's ears for secure, customized fit, even during high-intensity activity.
- Included universal fit kit for personalized sizing ensures a perfect seal for maximum isolation and bass response.
- Zippered pouch protects earphones and cable when not in use.
- Performance-proven, road-tested Shure durability to withstand the abuse and rigors of daily use.
- Made for iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad (4th generation), iPad (3rd generation), iPad 2, iPad, iPod touch (5th generation), iPod touch (4th generation).
- iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air, iPad mini and Lightning are trademarks of Apple Inc.
SE215m+SPE Android Compatibility:
The 3-button inline remote + microphone is designed for use with Apple devices. Depending on manufacturer, model and operating system installed, some models of phones may cease to function, have limited functionality and/or cross compatibility. Some devices may work as intended or with restrictions on remote/voice functions.
The PLUS version also comes with a handy storage pouch and a second set of ear pads in a soft velour version.
Engineered to create a comfortable listening environment in areas with high ambient noise, these in-ear headphones feature a miniature microphone in each earpiece that picks up ambient noise (such as traffic, air-handling systems, etc.). Electronics in the QuietPoint control module create a noise cancelling wave that is 180- out of phase with the ambient noise. This wave acts like a noise eraser: it cancels out the annoying sounds that surround you without diminishing the audio you want to hear. The result...a peaceful enclave to enjoy the music or movies of your choice.
The ATH-ANC33iS in-ear headphones also feature an inline microphone and controller for answering calls and controlling music. The mic and controller support smartphones, iPhones, iPads, many iPods & other compatible devices. The microphone has an omnidirectional pickup pattern and it is designed for crisp intelligibility, so your voice will be clearly transmitted without having to speak directly into the mic.
More than 10 in stock $36.84
Decksavers are specifically designed to keep your technology investment safe and sound. Decksavers are tailor-made to exacting standards to fit the Technics turntable like a glove. Rather than using cheaper inferior acrylic, each one is made from polycarbonate, a very hardwearing plastic used in bullet proof glass, and made to fit your gear as closely as possible. The use of polycarbonate means that thinner material can be used, making for discrete, strong yet attractive protection for your Technics turntable. Indeed, great care is taken to trim each Decksaver to achieve the best fit and still leave cables in place.
The cover has a very strong contruction with sufficient flat areas allowing support for CDJs, laptops, midi controllers, etc.
Back construction consists of a paper layer sandwiched between two sheets of high-density polyethylene (HDPE) with a translucent HDPE front.
These custom-designed inner sleeves protect against all common problems associated with regular sleeves of all types, such as scratching, static build-up and contamination etc.
Your records are irreplaceable, these sleeves will guarantee they last a lifetime.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.
- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records
One end of this wire has a spade lug connection, whilst the other is bare wire.
The 10" Orange Peel Finished clear PVC record sleeve comes complete with a thumb cut out at the top for ease of inserting and removing records. It is the highest quality and most robust sleeve you can get. It is ideal for your priceless vinyl to keep them protected.
Made from the finest but strongest felt material, DMC slipmats are the No.1 choice for DJs and vinyl lovers across the World. Dependable & hard wearing, they are also resistant to dust & other particles, so will not scuff, scratch or damage vinyl.
Great for your home, studio, club or in competition, these superior slipmats are your turntable and vinyl's best friend.
Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the colour throughout a run. Every record is unique.
*** PLEASE NOTE: AS WITH ALL COLOURED VINYL, THERE MAY BE SLIGHT TRACES OF OTHER COLOURS WITHIN THE VINYL. THIS IS NORMAL AND DOES NOT MEAN THE VINYL IS DEFECTIVE. IT DOES NOT ADVERSELY AFFECT THE PRESSING IN ANY WAY AND RETURNS OF THIS NATURE CANNOT BE ACCEPTED ***
This preset has been configured with the titanium-coated S02 speaker unit that delivers a punchy and intense sound representation, focusing on bass and low end dynamics. The combination of the durable H02 nylon headband and the E02 on-ear PU leather earpads, which provides high isolation, results in a powerful, sturdy headphone suitable for live performance and electronic/bass heavy music.
Engineered with a 40mm titanium-coated driver to reduce distortion, and designed with an internal vent allowing the middle bass to be more clear and punchy, which is great for picking up the beat. A gradual dip towards the high frequencies prevent listening fatigue.
The Speaker Unit housing is injected moulded from durable ABS material and coated with rubber to give a matte look with a soft feeling. Both plugs feature a cable lock that securely locks the cable in place.
New reinforced injection-moulded headband made from the best engineering nylon grade available. A durable compression moulded silicone headpad gives a better grip and the rugged headband is easy to clean after a long night in the club.
Gold plated plugs ensure optimal connection to your speaker units and the cable locks keeps the cable in place.
Soft on-ear foam cushion covered with PU leather. The thickness of the cushion and the materials used give a closed and intense sound representation. Produces strong bass and low end dynamics.
High isolation. Good for DJing and electronic music. Centred sound stage and high isolation. Height 20 mm. Outer diameter 70mm. Inner diameter 32mm.
Coiled, black, 1.5m thermo plastic cable with soft touch surface. Extends up to 3.2m. Perfect for DJing or small studio use. Comes with 1/4" to 1/8" screw-on adaptor.
KRK's Rokit 6 G3 (Generation 3) powered studio monitors offer professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1" soft dome tweeter and 6" glass-Aramid composite woofer. It delivers high frequencies up to 35kHz, vocal clarity and extended bass response. The proprietary bi-amped, class A/B amplifier grants SPL up to 107dB. The Rokit waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion. Multiple input connections ensure the ROKIT 6 G3 will easily integrate in any system configuration.
In larger rooms, where smaller monitors might not provide enough headroom, the Rokit 6 G3 provides enough backup for even larger set ups.
Your loudspeakers are the most critical components you use to verify the quality of your work. No matter how good your mixer, mics, preamps, cables, or other pieces of gear that you've invested in are, you're not truly hearing what your recordings sound like until you isolate your monitors from their environment.
This is where the Auralex Mopads come in. The Mopads provides sonic isolation between your monitors and whatever they are resting on, instantly improving the accuracy of your entire monitoring system.
The Mopads are affordable, easy to implement and really effective at decoupling your monitors from your room and all its contents. You've gotta get some. Until you do, you'll never know what your recordings really sound like.
-Superfine polished eliptical diamond bonded stylus
-Powerfull samarium cobalt magnet
-Lightweight aluminum alloy cantilever for high fidelity
-Carbon fibre reinforced plastic shoe
-Anti ferro magnetic permalloy shield casing
Stylus replacement: Nagaoka JN-P110
The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
Replace your missing spacer with a brand new original part, essential for use with the Stanton 500 range of cartridges.
The Technics headshell weight fits Mk2 Mk3 and Mk5 turntables.
Part number SFXG122-01(A).
Fits Mk2 Mk3 and Mk5 turntables.
Dimensions: 440mm L x 350mm W x 60mm H.
3 in stock $40.10