Back catalogue: All genres

Notes: Simple-to-Use Analogue Audio Mixing for Any Application

The Alto Professional TrueMix 500 is a portable mixer with a built-in stereo USB audio interface that delivers all the essential features you need for home recording, livestreaming, podcasting, or performing. There are five analogue inputs with high-headroom circuitry for minimal noise and clipping in your signal. The Mic Input Channel offers an XLR input that's great for connecting a dynamic mic. This channel also has a balanced 14" line input for connecting instruments and other line-level signals. There are also two Stereo Input Channels, each with dual balanced 14" TRS inputs. These inputs are perfect for your line level audio sources. All channels feature a two-band EQ with colour coded knobs that make it easy to dial in your perfect sound when operating in low-light situations. Connecting the TrueMix 500 to your computer is also lightning fast, with plug and play connectivity on Windows and macOS. The TrueMix 500 is your perfect companion for no-nonsense audio mixing and recording on the go.

TrueMix 500 Features

USB I/O for audio playback and stereo recording
1/4" Main, Tape, and Headphone outputs
Mic input channel with balanced line input
Two stereo input channels with balanced 1/4" TRS jacks
Two-band EQ on all channels
2-track inputs w/ assignable routing: Main Mix or Headphone Out

Technical Specifications

Frequency Response: All inputs: 20 Hz - 22 kHz (i1 dB)
THD+N (Total Harmonic Distortion): All inputs: < 0.005% (@ 4 dBu, 1 kHz)

Gain Range
Mic inputs (Channel 1): 0 - 44 dB
Line input (Channel 1): 12 - 30 dBu
Line inputs (Channels 2/3): 0 dBu

Max Voltage Gain
74 dB (Mic Input to Main Out and 2TK Output)
80 dB (Mic Input to Phones Output)
30 dB (Line Input to Main Out)

SNR (Signal-to-Noise ratio) All inputs: > 110 dBu

Impedance

Mic inputs: 3.9 kO
All other inputs: > 10 kO
2TK output: 1 kO
All other outputs: 120 O

Crosstalk
Adjacent inputs: < -80 dB @ 1 kHz
Inputs to outputs: < -75 dB @ 1 kHz (stereo L/R, Channel 1, panned hard left or right)

Equalization
High: +/-15 dB @ 12 kHz
Low: +/-15 dB @ 80 Hz

Connectors
(2) 1/4" (6.35 mm) TRS outputs
(2) 1/4" (6.35 mm) TRS stereo L/R inputs
(1) 1/4" (6.35 mm) TRS headphone output
(1) 1/4" (6.35 mm) TRS mono input
(1) XLR input
(1) Stereo RCA L/R input
(1) Stereo RCA L/R output
(1) USB type-B input
(1) DC power input


Controls
(1) Power switch
(6) Volume control knobs (1 per input and output)
(3) Gain control knobs (1 per channel)
(3) EQ Hi control knobs (1 per channel)
(3) EQ Low control knobs (1 per channel)
(3) Stereo pan control Knobs(1 per channel)
(2) Locking switch buttons

Indicators: (1) Power LED, (3) Peak LEDs, (8) Main Out meter LEDs

Main Mix
Main output: (2) 1/4" (6.35 mm) balanced TRS, +22 dBu max output
2TK output: (2) unbalanced RCA, 0 dBu max output
Headphone output: (1) stereo 1/4" (6.35 mm) TRS, 160 mW @ 32 O

Power
Connection: DC
Voltage: 18V, 500 mA
Consumption: 9 W

Dimensions (width x depth x height):6.3" x 7.6" x 2.6" / 159.5 mm x 193 mm x 66 mm
Weight 2.0 lbs. 0.9 kg

Notes: Portable Analogue Audio Mixing with the Power of Bluetooth

The Alto Professional TrueMix 600 is a portable audio mixer with Bluetooth and a built-in stereo USB audio interface that delivers all the essential features you need for home recording, livestreaming, podcasting, or performing. The TrueMix 600 features a dedicated Bluetooth channel for easily streaming from your personal devices. The Bluetooth channel also supports feedback-free phone pairing by utilizing mix-minus technology, a feature that no other audio mixer series in this class supports. There are six analogue inputs with high-headroom circuitry for minimal noise and clipping in your signal. The Mic Input Channels offers XLR inputs that are great for connecting dynamic mics or condenser mics with 48v phantom power. These channels also have balanced 14" line inputs for connecting instruments and other line-level signals. There are also two Stereo Input Channels, each with dual balanced 14" TRS inputs. These inputs are perfect for your line level audio sources. All channels feature a two-band EQ with colour coded knobs that make it easy to dial in your perfect sound while operating in low-light situations. Connecting the TrueMix 600 to your computer is also lightning fast, with plug and play connectivity on Windows and macOS. The TrueMix 600 is a feature-packed compact audio mixer that's perfect for using on-the-go.

Robust Output Routing

Whether you're making music at home, recording a podcast, or livestreaming online, being able to hear yourself is essential. The TrueMix 600 features a variety of output and routing options to handle any scenario. There are two headphone outputs, each with their own independent volume control knob. If you need to send your audio signals to another destination like an external effects processor, there is an AUX send/return and individual AUX send controls on each individual channel so you can always dial in the perfect mix. For recording, the USB output sends a copy of the main outputs to your computer, or you can connect the 2-Track in/out to an external recorder which can also be sent directly to one of the headphone outputs. The TrueMix 600 delivers everything you need to take full control of your audio routing.

TrueMix 600 Features

USB I/O for audio playback and stereo recording
Dedicated Bluetooth channel with mix-minus return for feedback-free phone pairing
Dual headphone outputs with independent volume control
1/4" Main, Tape, Headphone, and AUX outputs
Two mic input channels with phantom power and balanced line inputs
Two stereo input channels with balanced 1/4" TRS jacks
Two-band EQ on all channels
2-track inputs w/ assignable routing: Main Mix or Headphone Out
Eight-segment LED VU meter for precise level monitoring

Technical Specifications

Frequency Response All inputs: 20 Hz - 22 kHz (+/-1 dB)
THD+N (Total Harmonic Distortion) All inputs: < 0.005% (@ 4 dBu, 1 kHz)

Gain Range:
Mic inputs (Channels 1-2): 0 - 50 dB
Line inputs (Channels 1-2): 15 dBu - 35 dBu
Line inputs (Channels 3-6): -20 dBu - +20 dBu

Max Voltage Gain:
70 dB (MIC INPUT to MAIN MIX OUTPUT)
80 dB (MIC INPUT to CTRL ROOM / PHONES OUPTUT)
60 dB (MIC INPUT to AUX SEND)

SNR (Signal-to-Noise ratio) All inputs: > 110 dBu

Crossover Frequency:
Adjacent inputs: < -80 dB @ 1 kHz
Inputs to outputs: < -75 dB @ 1 kHz (stereo L/R, Channels 1-2, panned hard left or right)

Phantom Power: +45 ~ +49V with switch control

Impedance
Mic inputs: 3.9 kO
All other inputs: > 10 kO
Aux outputs: 1 kO
All outputs: 120 O

Equalization
High: +/-15 dB @ 12 kHz
Low: +/-15 dB @ 80 Hz

Bluetooth
Profile: A2DP
Module: Bluetooth 5.0
Operating Frequency: 2402 MHz - 2480 MHz
Range: 100 ft. / 30.5 m

Connectors
(5) 1/4" (6.35 mm) TRS outputs
(6) 1/4" (6.35 mm) TRS stereo L/R inputs
(2) 1/4" (6.35 mm) TRS headphone output
(2) 1/4" (6.35 mm) TRS mono input
(1) Standard RCA L/R input
(1) Standard RCA L/R output
(2) XLR inputs
(1) USB type-B input
(1) DC power input

Controls
(1) Power switch
(10) volume control knobs (1 per input, 1 aux return, 1 2TK In, 2 headphone out, 1 Bluetooth, 1 Main Out)
(4) Stereo pan control knobs (1 per input)
(4) Aux volume control knobs (1 per input)
(4) EQ Low control knobs (1 per input)
(4) EQ Hi control knobs (1 per input)
(4) Gain control knobs (1 per input)
(3) Locking switch buttons (2 source select, 1 Bluetooth)
(1) Horizontal sliding switch

Indicators
(1) Power LED
(4) Peak LEDs
(1) Phantom LED
(16) Main Out Meter LEDs
(1) Bluetooth LED

Power
Connection: DC
Voltage: 18V, 1A
Consumption: 18W

Dimensions (width x depth x height) 8.9" x 8.5" x 2.9" / 225.5 x 217 x 74 mm
Weight 3.2 lbs. 1.4 kg

Notes: Great value from this compact eight-channel mixer featuring built-in Alesis effects. Bluetooth and USB in/out give added versatility, allowing you to mix just about any sound source.

Supplier's Notes:
Easy-to-Use Analogue Audio Mixing with Built-in Effects from Alesis

The Alto Professional TrueMix 800 FX is a portable audio mixer with built-in DSP effects that delivers all the essential features you need for home recording, livestreaming, podcasting, or performing. The TrueMix 800 FX features 16 effects including chorus, flange and an assortment of high-quality delays and reverbs. There's also a convenient Bluetooth channel for easily streaming from your personal devices. A unique feature to the TrueMix Series, the Bluetooth channel also supports feedback-free phone pairing by utilizing mix-minus technology. There are eight analogue inputs with high-headroom circuitry for minimal noise and clipping in your signal. The four Mic Input Channels offer XLR inputs that are great for connecting dynamic mics or condenser mics with 48v phantom power. These channels also have balanced 14" line inputs for connecting instruments and other line-level signals. There are also two Stereo Input Channels, each with dual balanced 14" TRS inputs. These inputs are perfect for your line level audio sources. All channels feature a two-band EQ with colour coded knobs that make it easy to dial in your perfect sound while operating in low-light situations. There are even extra knob caps included so you can fully customize the look of your TrueMix 800 FX. Connecting the TrueMix 800 FX to your computer is also lightning fast, with plug and play connectivity on Windows and macOS. The TrueMix 800 FX is a feature-packed compact audio mixer that's perfect for using on-the-go.

Flexible Output Routing

Whether you're recording a podcast, livestreaming online, or making music at home, being able to hear yourself and easily route audio is essential. The TrueMix 800 FX features a variety of output and routing options to handle any scenario. There are four headphone outputs, each with their own volume control knob. If you need to send your audio signals to another destination like an external monitor or effects unit, each channel is equipped with a send knob so you can always dial in the perfect mix. For recording, the USB output sends a copy of the main outputs to your computer, or you can connect the 2-Track in/out to an external recorder which can also be sent directly to the headphones. The TrueMix 800 FX delivers everything you need to take full control of your audio routing in any situation.

Product Features:

TrueMix 800 FX Features
USB I/O for audio playback and stereo recording
Dedicated bluetooth channel with mix-minus return for feedback-free phone pairing
Four headphone outputs with independent volume control
16 built-in Alesis multi-fx with dedicated return channel
1/4" Main, Tape, and AUX outputs
Four mic input channels with phantom power and balanced line inputs
Two stereo input channels with balanced 1/4" TRS jacks
Two-band EQ on all channels
2-track inputs w/ assignable routing: main mix or headphone out
Eight-segment LED VU meter for precise level monitoring
Extra knob caps included in the box for added customization

Technical Specifications

Frequency Response All inputs: 20 Hz - 22 kHz (i1 dB)

THD+N (Total Harmonic Distortion)
All inputs: < 0.005% (@ 4 dBu, 1 kHz)

Gain Range Mic inputs (Channels 1-2): 0 - 50 dB Line inputs (Channels 1-2): 15 dBu - 35 dBu Line inputs (Channels 3-6): -20 dBu - +20 dBu

Max Voltage Gain
70 dB (MIC INPUT to MAIN MIX OUTPUT)
80 dB (MIC INPUT to CTRL ROOM / PHONES OUPTUT)
60 dB (MIC INPUT to MON SEND)

SNR (Signal-to-Noise ratio)
All inputs: > 110 dBu

Crossover Frequency
Adjacent inputs: < -80 dB @ 1 kHz
Inputs to outputs: < -75 dB @ 1 kHz (stereo L/R, Channels 1-2, panned hard left or right)

Phantom Power: +45 ~ +49V with switch control

Impedance
Mic inputs: 3.9 kO
All other inputs: > 10 kO
Aux outputs: 1 kO
All outputs: 120 O

Equalization High:
+/-15 dB @ 12 kHz
Low: +/-15 dB @ 80 Hz

Bluetooth
Profile: A2DP
Module: Bluetooth 5.0
Operating Frequency: 2402 MHz - 2480 MHz
Range: 100 ft. / 30.5 m

Connectors
(6) 1/4" (6.35 mm) TRS outputs
(6) 1/4" (6.35 mm) TRS stereo L/R inputs
(4) 1/4" (6.35 mm) TRS headphone outputs
(4) 1/4" (6.35 mm) TRS mono inputs
(1) Standard RCA L/R input
(1) Standard RCA L/R output
(4) XLR inputs
(1) USB type-B input
(1) DC power input

Controls
(1) Power switch
(15) volume control knobs (1 per input, 1 return, 1 EFX return, 1 2-track/USB in, 4 headphone outs, 1 Bluetooth, 1 main)
(6) Stereo pan control knobs (1 per input)

(6) Mon volume control knobs (1 per input)
(6) EQ Low control knobs (1 per input)
(6) EQ Hi control knobs (1 per input)
(6) Gain control knobs (1 per input)
(4) Buttons (1-EFX mute, 1 Bluetooth, 2 Source Select)
(1) Horizontal sliding switch

Indicators
(1) Power LE
(6) Peak LEDs
(1) Phantom LED
(16) Main Out Meter LEDs
(1) Bluetooth LED

Power Connection: DC Voltage: 18V, 1.2A Consumption: 18W

Notes: We always expect high-grade aesthetics from Alva Noto and Ryuichi Sakamoto to match their exacting, elevated musical collaborations. The VIRUS series is their most recent run of works, encompassing five albums - Vrioon, Insen, Revep, Utp_, and Summvs (reMASTER), but up until now the albums have existed as separate nodes of crisp electronic expression. Organised record hoarders rejoice, because now Noton are releasing a slip case to house all the editions, presented in an eco-friendly, cream shaded Muken paper. Note, there’s no music in here - it’s purely a vessel for the music contained within.

Notes: Adds weight to the record to both stabilise uneven records and steady rotation speed.

Doubles as centrepiece for singles.

The record weight gives you:

- Smoother, richer tonal balance
- Increased dynamic range
- Vast improvement in overall soundstage clarity and instrumental definition
- Improved bass response
- Substantial reduction in vinyl noise floor
- Increased vinyl longevity

Notes: Removable disc for use with AMP Electronics' Star Song synthesiser.

*** The Star Song is not included, it is shown in the photo for demonstration purposes only. ***

Notes: One of the most unusual synths around, based on a rotating optical disc which functions as a sequencer. Program the built-in pulsewave synth engine or control other synths using the optional Wave Expander.

Supplier's Notes:
Taking its cosmic inspiration from star charts and ancient astrolabes, Star Song is a rotating optical disc-programmed sequencer with a built-in minimalist synthesizer.

Star Song can be used either to play its own built-in pulsewave synthesizer, or in combination with the A.M.P. electronics Wave Expander (sold separately) to drive external analogue and modular synthesizers.

How it is used

To create sequences on Star Song, the seven translucent rings (orbits) of the optical disc are marked with a marker (included) or opaque tape. The disc is removable and additional discs are sold separately, allowing for indefinite storage of your favourite sequences.

The outer six rings control the tuned note selection and note-on/off sequencing. The innermost ring controls the cut-off frequency for the built-in bandpass filter.

Disc on/off and disc direction are toggled from touch contacts on the front panel, and disc speed is controlled from the central rotary control.

Additionally, there are 1/8" inputs to control rotation speed and rotation direction with an external source.

The addition of Wave Expander makes the Star Song into an incredibly versatile Gate(6 channels) and CV (1 channel) sequencer, as well as providing the Star Song's tuned audio oscillator over five separate octave divisions (four audio and one sub-audio), 12 outputs in all to integrate into your modular system.

Multiple Star Song units can be synced by using an external clock signal, and you can even slave Star Song to your existing Melody Oracle/Wave Expander combo.

Sing the cycles of the spheres, with Star Song, a "revolutionary" new sequencer.

Tech Specs:

Disc Rotation: 0~15RPM
Panel Controls: Disc rotation on/off, disc rotation rate, disc rotation reverse.
Synthesizer: Quasi-monophonic pulsewave, 8 tuned notes, each with three octaves used in any combination. Sequenced via optical disc.
Tone Filter: Bandpass, optically-controlled.
Audio Output: 1/4" LINE (5V p-p)
AMP LINK Output: CAT 5 or 6 w/SHIELDED connector (compatible with Wave Expander and future AMP accessories only).
Motor Clock Input: 1/8" 0-12V. ON @>7.5V
Disc Direction Input: 1/8" 0-12V. CCW @>7.5V
DC input: 15VDC, 2.1mm, tip positive (US adapter included)

Notes: Unique touch-activated instrument with built-in speaker, allowing you to trigger notes with one hand and modulate the timbre via touch pads. Unorthodox tones, unorthodox interface. Lots of fun.

Supplier's Notes:
Touch Tones is a touch activated auto harmonic synthesizer, with a 3 octave tuning range, XOR logic modulator, Harmonicon auto harmony generator, and two onboard bandpass filters. The left side of the Touch Tones holds three capacitive touch pads for playing notes, while the right side contains a set of 7 touch pads to modulate the different parameters sequencing the synthesizer.

Three octave range plus XOR modulator.
Harmonicon automatic harmony keys play a perfect 5th of each tuned ROOT note.
Dual Luma filters for active timbral shaping via light control.
Wear the Touch Tones for Function or Fashion with the included chain lanyard.

Notes: Wave Expander bridges the gap between the Melody Miracle and Touch Tones synthesizers, and the rest of the synthesizer world. Control other synths by sending CV and gate signals via Wave Expander, and dial in the right amount of control with onboard CV tuners. Outputs are visually indicated with the Chrominancer color window at the center of Wave Expander, bringing cosmic insight to the signals at hand.

Melody Oracle and Touch Tones expander module
Use AMP synthesizers to control external gear
12 outputs (6 CV/6 Gate)
CV Range: 0V to +12V
Chrominancer color window

Notes: The Blackbox and Bluebox gives you complete recording and mixing capabilities in the palm of your hands. With a portable sampler and mixer this powerful, you're going to want a case to protect it while you're on the go.

The GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.

The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.

Custom designed for the 1010music Blackbox and Bluebox

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 6.25 x 5.5 x 1.5

Notes: Extend your Large XTS Stand's functionality with a Flex Tray: the perfect solution for using multiple pieces of gear on a single desktop stand!

The XTS Flex Tray is available in two lengths: 13.3" or 17.7". It attaches easily and securely to your Large XTS Stand, with no tools required.

The 13.3" Flex Tray can hold 2-3 small pedals or synths. The 17.7" Flex Tray can fit an Elektron Digitakt and Digitone, two SP-404s, 2 large pedals like a Strymon BigSky or Timeline, or up to 6 compact pedals like Chase Bliss.

The XTS Flex Tray is compatible with the Large XTS Stand. For other XTS Stand size options, check out our complete XTS Desktop Stand System.

Flex Tray for Large XTS Stand
Xtend your XTS Stand's functionality
Use multiple pieces of gear on a single desktop stand
2 sizes available for ultimate versatility
Crafted from 100% solid sheet metal

Specs

13.3" Flex Tray

Length: 13.3"
Width: 8.3"
Weight: 2.9 lbs
Fits 2-3 small pedals or synths

Notes: Transport case for 14" Macbook Pro

This carrying case from Analog Cases is specially designed for the 14" Macbook Pro.

In contrast to conventional nylon bags, the cases of the PULSE line are made of sturdy EVA (a moulded polymer that has so far only been used for high-quality housings in consumer electronics). It retains its shape and provides excellent protection. The sturdy carrying strap and low weight make the PULSE Case the ideal companion for a variety of common mini controller keyboards, smaller electronic musical instruments or audio interfaces. Inside, the separate nylon mesh pocket brings order to the cable chaos.

Analog Cases stands for practical and stylish design. The robust and lightweight bags are designed for modern music creators whose equipment is as mobile as their lifestyle. About its name, the manufacturer says:

"The name Analog Cases reflects our design philosophy: Bags should be simple, cool and stylish. For us, analogue is more than just a kind of sound - it's a way of life. Analogue means timeless, creative and beautiful. That's what motivates us to make music, and it's what motivates us to create cases."

Notes: Taking your creativity on the go is easy with our PULSE Case for the Akai MPC Studio 2! With a rigid exterior made from molded EVA material and a plush velvet interior, you can feel confident knowing your MPC Studio 2's LCD screen and touch-sensitive pads are totally protected. This ultra-compact and totally flat case will pack easily into your backpack, so you can use the entire world as your studio!

Description

These PULSE cases are made from a durable EVA material that is custom molded to your Akai MPC Studio 2. This secure fit will prevent your MPC from shifting and moving if you throw your case into your backpack or luggage when you're on the move.

The nylon strap makes carrying this case a breeze and the secure fit will prevent your MPC from shifting and moving as you throw your case into your backpack or luggage.

The interior of the PULSE case features a mesh pocket for storing extra cables or notes. The case is also lined with high-quality, soft velvet. This ensures that the sleek exterior, LCD screen, and pads are protected as you move.

Specifications

Custom molded to the Akai MPC Studio 2
Made from a lightweight and durable EVA material
Internal storage pocket for extra cables
Lightweight and easy to carry
Exterior: 14.76 x 8.46 x 2.56

Notes: The ultimate case for your 16" or 15" MacBook Pro! Compatible with the 2022, 2021 or 2020 16" MacBook Pro, or the 2016-2019 15" MacBook Pro.

The Analog Cases PULSE MacBook Pro Case has been carefully designed to the unique needs of highly mobile creative professionals. If you demand the highest level of protection for your MacBook Pro, our PULSE Case will deliver.

The case features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of both the 16" / 15" MacBook Pro. In the unfortunate event of any falls, the EVA material is shock-resistant and will absorb the blow to prevent any damage to your laptop.

A spacious storage area underneath the laptop has a dedicated compartment for your charger, plus two other large compartments that are a perfect fit for many popular external hard drives such as LaCie or Western Digital. The upper lid of this case features two additional storage pockets for your cables and accessories.

This case also features a super-soft velvet interior lining, ballistic nylon exterior, comfortable and ergonomic handle, and our signature sleek and minimalist aesthetics.

Description

Whether you're a music producer, photographer, video editor, or podcaster, you'll appreciate the serious protection, versatile storage options, and compact design of our rigid molded case.

The PULSE MacBook Pro case is the ONLY case that features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 16" or 15" MacBook Pro.

As a creative professional, your external hard drive, battery packs, and cables are just as important as your laptop itself. That's why this case has been designed for maximum versatility and storage capacity. A spacious storage area underneath your MacBook Pro has a dedicated compartment for your charger, plus two other large compartments.

And that's not all. The upper lid of this case features two additional storage pockets for your cables and accessories, which are separated by a padded divider to keep everything organized and protected. The storage pockets can be securely sealed with a velcro strap to ensure that your gear remains in place during travel.

Specifications

Die-cut EVA foam insert customized to the exact dimensions of the 16" or 15" MacBook Pro

3 dedicated storage compartments for accessories that measure:
- 12" x 3.3" x 1.1"
- 7.2" x 3.2" x 1.1""
- 3.7" x 3.2" x 1.1"

2 interior storage pockets, each measuring 15.4" x 8.3"

Exterior case dimensions: 18.75" x 12.5" x 3.25"
Interior case dimensions: 16.4" x 11" x 3"
Weight: 3.4 lbs

Notes: This PULSE case is molded to the exact dimensions of the Arturia MicroFreak / MiniLab / MicroBrute. It provides excellent protection for your synth, and is extremely lightweight.

PULSE cases are made from rigid EVA that holds its shape, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Perfect fit for your Arturia MicroFreak, MiniLab or MicroBrute

Separate compartment for holding cables

Spacious and comfortable handle

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 15.25 x 9.25 x 2.5 inches

Exterior dimensions: 16.5 x 10.5 x 3.25 inches

Notes: Keep your headphones safe for many sessions and gigs to come with the PULSE Case For Studio Headphones! This durable molded case can fit any model of professional studio monitor headphones from Beyerdynamic, Sennheiser, Shure, Sony, Audio-Technica, and other leading brands. Like all PULSE cases, this case is compact and ultra-lightweight, so it's easy to travel with.

Description

The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.

The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!

Specifications

The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33

Notes: The Critter & Guitari Organelle M is an extremely mobile machine. This GLIDE case has been custom molded to fit and protect your Organelle M when you're on the go.

Description:

Made to easily fit into a backpack or suitcase, this case provides real protection. The exterior is rigid, and is topped with waterproof faux leather, while the interior features a soft velvet lining. There's even an interior pocket for storing your cables. With a snug fit, you won't need to worry that your Organelle M could be dislodged during transport.

Specifications:

Perfect fit for your Critter & Guitari Organelle M

Premium faux leather exterior and soft velvet lining

Mesh compartment for holding cables

Interior dimensions: 13.5 x 3.5 x 2.5 inches

Notes: The perfect lightweight travel case for your Digitakt or Digitone! Just zip it up and go make music anywhere. Analog Cases' durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Digitakt or Digitone + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 10.25 x 7.25 x 2.75 inches

Notes: Pulse case for Elektron Digitakt / Syntakt / Digitone

The perfect lightweight travel case for your Digitakt, Syntakt, or Digitone! Just zip it up and go make music anywhere. Our durable PULSE cases are designed for mobile electronic musicians.

PULSE cases are made from moulded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications

Perfect fit for your Digitakt or Digitone + cables
Versatile and lightweight
Spacious and comfortable handle
High quality Analog Cases logo zipper puller
Interior dimensions 10.25 x 7.25 x 2.75 inches

Notes: The Elektron Model Samples/Cycles are perfect for making music on the go. But we all know traveling with gear comes with risks. Unlike soft nylon bags, this PULSE case is made from sturdy molded EVA material that will provide peace of mind for mobile musicians.

Description:

Custom-designed to the exact dimensions of the Model Samples /Model Cycles, it features a rigid exterior, soft, velvet-lined interior, and a nylon mesh pocket for cable storage. You won't have to worry about the safety of your machine when it's in this PULSE case.

Specifications:

Perfect fit for your Model Samples or Model Cycles + cables

Durable and lightweight

Spacious and comfortable handle

Interior mesh pocket

Interior dimensions: 11 x 7.25 x 2.25 inches

Notes: Protect your Octatrack! The Elektron Octatrack is one of the most important and iconic machines for performing live electronic music. If you tour or perform live with your Octatrack, this is just the case for you.

Description:

This PULSE case is custom designed for the Octatrack. It's molded to the exact length of the machine, but we've also included additional space for holding your power cable.

The top lid of the case includes a layer of dense sponge foam, to protect the delicate fader and knobs of your machine. The body of the case is reinforced with extra-thick molded EVA foam, to survive the rigors of the road.

Whether you pack this case inside a suitcase, or carry it using the spacious and comfortable handle, it's the perfect lightweight solution to keep your machine in great shape. As an added bonus, this case can also be used for the Analog Rytm MK1 or Analog Four MKI.

Specifications:

Perfect fit for your Octatrack + power supply

Sponge foam lining in top lid to protect your fader and knobs

Interior velvet lining with molded EVA foam for additional protection

Extra-large premium zipper

Spacious and comfortable handle

Interior dimensions: 14 x 9 x 2.5 Inches

Exterior dimensions: 14.75 x 10.5 x 3.5 Inches

Notes: A portable interface needs a secure and mobile case! The compact GLIDE case features a soft, velvet-lined interior to keep your 2i2 looking new, and you'll have plenty of room to store cables in the mesh compartment built into the lid. The compact GLIDE case is designed to keep the footprint of your 2i2 small and lightweight while protecting your gear.

Description

The GLIDE case for the Focusrite 2i2 is custom molded to fit your interface perfectly without taking away from its portability. The case is made from the durable EVA material designed to protect your interface when you throw it in your backpack or carry it to and from your session.

The interior of the GLIDE case features a mesh pocket for storing any extra cables you might have. The soft, velvet-lined interior will protect the sleek exterior of the 2i2 while keeping the knobs and inputs safe from knocks and debris. Become as portable as you need to be while knowing your Focusrite 2i2 will be looking good as new!

Specifications

Custom molded to the exact dimensions of the Focusrite 2i2
Separate storage pocket for cables
Durable EVA exterior
High-quality, velvet-lined interior
Interior: (7.68 x 4.09 x 2.2) inches
Exterior: (8.19 x 4.92 x 2.68) inches

Notes: PULSE Case for Korg Drumlogue

Looking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.

Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.

Description

Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.

Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.

Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.

Specifications

Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches

Notes: This PULSE case was designed with one thing in mind: keeping your MicroKorg / MicroKorg XL+ in good condition and working properly. There's no need to settle for a generic gig bag. This is the one you've been waiting for!

Description:

This lightweight and user-friendly case is custom molded to the exact dimensions of the MicroKorg / MicroKorg XL+. Its rigid exterior will provide excellent protection for your synth.

Made with high-quality, durable materials, this case features a velvet-lined interior that will give you peace of mind when traveling with your MicroKorg. And this case also has a spacious interior pocket for storing your cables.

Specifications:

Perfect fit for your Korg MicroKorg / MicroKorg XL+

Separate compartment for holding cables

High-quality, premium handle designed for comfort

Extra-large premium zipper

Interior dimensions: 22 x 9 x 3.75 inches

Exterior dimensions: 23.75 x 11 x 3.75 inches

Notes: The new PULSE Case For The Korg SQ-64 is the ideal solution for protecting your SQ-64. If you're transporting your SQ-64 to a live performance or just performing with friends, you'll feel confident stepping into any environment with the PULSE Case for the SQ-64.

Description

The PULSE Case has been custom-designed to fit form to the exact dimensions of the Korg SQ-64. Made out of a molded EVA material, the PULSE case will protect the knobs, screen, and pads during transport.

The PULSE cases interior is lined with black velvet material to prevent any scratches on the screen of your SQ-64. The PULSE Case also includes a mesh pocket for storing any additional USB or patch cables you might have. If you're throwing your sequencer in your backpack or stepping out into the live environment, the PULSE case is the logical sequence in protecting your SQ-64.

Specifications

Perfect fit for your Korg SQ-64
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (15.04 x 5.71 x 1.97) Inches

Notes: Introducing the PULSE Case for the Make Noise 0-Coast and 0-CTRL, which can store two Make Noise modules in one very convenient case. Analog Cases have included two cutouts in the case to transport the power supplies below the modules, and the included mesh pocket gives you plenty of space for storing patch cables. Of course, this case can also fit the new Make Noise Strega as well, so your mobile modular performance options are almost limitless!

The PULSE Case for the dual Make Noise instruments is made with durable EVA plastic, the same lightweight material used for football helmets and surfboards. With a PULSE Case, you can toss these synths in your backpack and take it anywhere to jam. Inside the top lid, there's a mesh pocket for storing patch cables, so that you can keep everything for your jam together in one place.

The PULSE Case for the Make Noise 0-Coast and 0-CTRL is molded to the exact dimensions of the semi-modular instruments, so you won't have to worry about the analog components getting damaged when you take your synths on the road.

Specifications

Perfect fit for the Make Noise 0-Coast and 0-CTRL
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom-molded and die-cut interior
High-quality black velvet lining
Exterior: (15 x 8.82 x 3.31) Inches

Notes: The perfect case for your Make Noise 0-Coast, 0-CTRL, Strega or Moog Werkstatt-01 with CV expander! Just zip it up and go make music anywhere. These lightweight and durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the 0-Coast along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your 0-Coast, 0-CTRL, or Werkstatt + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 11 x 6.5 x 1.5 inches

Notes: With their compact size, Moog's modern modular synths are perfect for travel. But if you're traveling with your Moog, make sure its protected. This PULSE case has been carefully designed with a customized fit and sturdy materials, to keep your Moog in great shape for years to come.

Description:

Manufactured with extremely durable material, a premium zipper that's built to last, and a handle designed for comfort, this case provides the kind of protection that Moog instruments deserve. There's even room for the power supply, and an interior nylon mesh pocket for your patch cables.

Specifications:

Perfect fit for your Moog Mother-32, DFAM, or Subharmonicon

Spacious interior pocket for cables

Comfortable molded handle

Interior dimensions: 15.5 x 6.25 x 4.25 inches

Notes: The GLIDE Case for the PreSonus Studio 24c is the ideal solution for keeping your audio interface safe and protected. The custom-molded design and velvet-lined interior provide exceptional protection when you're on the go. When you need to pack up and move at a moment's notice, you can be confident that the GLIDE case will keep the knobs and inputs of your Studio 24c safe from any bumps or falls!

Description

The GLIDE case is molded to the exact dimensions of the PreSonus Studio 24c. This means your interface will be secure inside the case without shifting or moving during transport. The interior is lined with soft velvet to keep your Studio 24c safe from any scuffs or scratches. We have also included a mesh pocket for extra cables.

The exterior of the GLIDE case is made of a durable and stress-tested EVA material. This will protect the inputs and knobs of your Studio 24c from any unintended drops or spills during transport.

Specifications

Custom designed for the PreSonus Studio 24c
Durable EVA exterior
Soft, velvet-lined interior
Mesh compartment for holding cables
Interior dimensions: (7.44 x 6.5 x 2.05) Inches
Exterior dimensions: (8.19 x 7.28 x 2.44) Inches

Notes: With the Roland MC-101, you can produce music anywhere, anytime. Keep your unit protected while you're on the move with this durable and lightweight GLIDE case.

Description:

Custom-molded to fit the MC-101 or TR-6S, this case will provide the protection you need. The exterior is rigid and waterproof, while the interior is lined with soft velvet. Made from high-quality, premium materials, you'll never have to worry about your MC-101 while it's in our GLIDE case.

Specifications:

Custom designed for the Roland MC-101 or TR-6S

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 9.75 x 5 x 2 inches

Exterior dimensions: 10.5 x 6 x 2.75 inches

Notes: Transport bag for Roland SH-4D

This carrying case from Analog Cases is specially designed for the Roland SH-4D synthesizer.

In contrast to conventional nylon bags, the cases of the PULSE line are made of sturdy EVA (a moulded polymer that has so far only been used for high-quality housings in consumer electronics). It retains its shape and provides excellent protection. The sturdy carrying strap and low weight make the PULSE Case the ideal companion for a variety of common mini controller keyboards, smaller electronic musical instruments or audio interfaces. Inside, the separate nylon mesh pocket brings order to the cable chaos.

Analog Cases stands for practical and stylish design. The robust and lightweight bags are designed for modern music creators whose equipment is as mobile as their lifestyle. About its name, the manufacturer says:

"The name Analog Cases reflects our design philosophy: Bags should be simple, cool and stylish. For us, analogue is more than just a kind of sound - it's a way of life. Analogue means timeless, creative and beautiful. That's what motivates us to make music, and it's what motivates us to create cases."

Notes: Glide Case for the Teenage Engineering OP-1 Field or OP-1

Redesigned for 2023, Analog Cases' classic OP-1 case is now the perfect travel solution for either the OP-1 Field or the original OP-1!

Protect your investment and keep your OP-1 in mint condition with our lightweight and durable GLIDE case - the first and only case that's custom-moulded to the exact dimensions of this amazing machine.

Description

Now you can enjoy peace of mind when packing up your OP-1. This moulded case features a water-resistant faux leather exterior material, plus a layer of rigid moulded foam that surrounds your OP-1, providing excellent protection.

The subtle diamond pattern on the exterior surface makes this case smooth and sleek, and there's even a mesh compartment for holding cables or other miscellaneous items. The compact form factor makes it easy to put the case inside your backpack or suitcase.

Specifications

Perfect fit for your Teenage Engineering OP-1
Premium faux leather exterior and faux fur lining
Mesh compartment for holding cables
Exterior dimensions 12 x 5.5 x 1.5 inches
Interior dimensions 11.5 x 4.4 x 1.3 inches

Notes: Your powerful and lightweight KeyStep 37 will instantly become portable with a proper case to protect it during travel. From composing in your DAW to jamming with hardware, the KeyStep 37 can go with you anywhere with this PULSE Case.

Description:

The PULSE Case for the Arturia KeyStep 37 was designed by musicians to be highly versatile for all your mobile mobile scenarios, from tossing it in the trunk to packing it inside your luggage. The KeyStep 37 case is made from rigid EVA material that holds its shape, and is shockproof and water-resistant.

This PULSE Case features an interior mesh pocket that can store any extra cables, as well as an ultrasoft velvet interior lining to prevent any scratches on the surface of the KeyStep 37. With the PULSE Case, you'll never have to worry about traveling with your controller, so you can focus on making great music!

Specifications:

Perfect fit for your Arturia KeyStep 37

Comfortable molded handle

Interior pocket for holding cables

Versatile and lightweight

Interior dimensions: 22.25 x 7 x 3 inches

Exterior dimensions: 23 x 8 x 3.5 inches

Notes: Inspired by the early 80s Synton Syrinx, the SER-2020 is a semi-modular monster, featuring an excellent formant filter section, unique Touch 'N Bend Control and MPE-compatible MIDI interface.

Supplier's Notes:
The SER-2020 is a monophonic semi-modular analog synthesizer with an formant filter section, designed to use as standalone synthesizer or in combination with Eurorack modules. Inspired by the Synton Syrinx *(1) added the flexibility of an MS-20. Its filter design features a combination of a 24dB/octave VC Low Pass Filter, and two independent Resonant VC Peak Filters for precise and dynamic sound shaping. The sound is ranging from solid bass sounds to articulated formant effects. Other features on the SER-2020 are the Touch 'N Bend Control together with the MPE (MIDI Polyphonic Expression) capabilities makes the SER-2020 a special instrument which response to its player. The flexible routing makes the SER-2020 a versatile machine for sound effects.

Key Specifications:
2 VCO's (CEM3340 based)
1 Sub-Oscillator
Ring Modulator
Noise Generator
Audio Mixer
Multi-Mode Sync & Sync D-Tune
3 VCF's (CEM3350 based)
2 ADSR's
2 LFO's with Reset & Shaper Modes
Auto-Glide
Multiple Triggering
Touch 'N Bend Pad
Bend Assign
Sample and Hold
Semi Modular Setup - CV inputs and outputs
Signal and Headphone output.
MIDI interface
USB MIDI interface
MPE compatible - Sensitive for; Strike (note-on velocity), Press (aftertouch), Glide (pitch bend), Slide (brightness) and Lift (note-of velocity).

The SER-2020 consist of two VCO's and one sub-oscillator, driven by VCO 1. Both VCO's deliver a triangle, sawtooth, square wave and pulse signal, which can be selected. A rich spectrum can be obtained with Pulse Width Modulation of VCO 1 and VCO 2. The LFO 1 and 2 signals can be feed to the pulse width modulation section introducing phase shift effects and Doppler frequency shifts. Since the both VCO's have a separate LFO for PWM, chorus-like effects can be obtained by controlling both pulses with different LFO speeds. VCO 2 can be synchronized to VCO 1 in different modes. Synchronization is applied when two or more VCO's have to produce exactly the same pitches, without phase shift or beat effects. When VCO 2 is detuned from VCO 1 another effect occurs, which will result in quite dramatic tone colors.
Each VCO has an individual output, also the noise generator and sub-oscillator has individual outputs.

The most important sections of this synthesizer is the filter. The SER-2020 features a very extensive filtering system, which consists of the standard 24 dB/octave low pass filter and two independent band pass filters, which together form the Voltage Controlled Formant filter.
Both band pass filters have a frequency control and a resonance control for setting the selective amplification in the pass band. The bandpass filters are equipped with a control voltage mixer for LFO, ADSR and key range voltages. The LFO control can be used for the external modulation input.
The low pass filter is an standard 24 dB/octave roll-off. It has a frequency control and a modulated CV mixer from several sources like LFO, ADSR and the key range. The LFO control can be used for the external modulation input. Also the resonance of the low pass filter can be controlled.

The SER-2020 has two ADSR generators, of which one is used to control the internal VCA, and the other one to control the filter section. The control signal can be inverted by means of the ADSR controls in the filter section, so that the filters can be swept in opposite directions.
ADSR 1 and 2 have a positive and negative (inverted) direct output available on the patch panel.

The SER-2020 has two independent Low Frequency Oscillators (LFO's) of which the rate can be controlled, and for LFO 2 also the wave shape.

LFO 1 generates a triangle wave which exclusively is routed to the pulse width modulation control input of VCO2. LFO 1 also generates a square wave and a pulse wave. The square wave is available as direct output on the patch panel. The pulse wave of LFO 1 is internally routed to the sample and hold generator as clock source.

LFO 2 is more versatile and can be used for the modulation of the VCO's and the filters. Moreover LFO 2 can be used as a one shot generator which means that a signal is generated much alike an Attack/Release generated function. Except for the LFO 2 rate control with the preset knob, it also can be controlled dynamically with the pad.

Several sections in the synthesizer can be controlled with the bend pad, by pressing it with the left hand index and middle finger. The pressure sensitivity for the VCO, VCF and VCA can be adjusted. The touch 'N bend pad also reacts on the MIDI modulation control and the MIDI brightness (CC#74) control for MPE compatibility.
Also the speed of the rise/decay mode of the LFO 2 is possible. Pressing the UP pad will result in a shorter cycle, and pressing the DN pad in a longer cycle.

Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.

These will light red / green as the signal swings from a positive to negative voltage.

The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).

Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.

The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.

Notes: Like a greatest hits of recent Analogue Solutions synths, the Ample combines sound elements from the Fusebox with jack patch points, a patch pin matrix, plus sequencer and CV touch pads from the Generator, creating something new and unique.

Supplier's Notes:
Ample combines the best elements of several of Analogue Solutions' recent products.

The sound elements of Fusebox
Jack patch points of Concussor Eurorack
Patch pin matrix of Vostok
Echo from Dr Strangelove
Sequencer and CV touch pads of Generator

It shares all this yet still has its own sound!

Ample can be as complex or as simple as you want it to be

This synth has been given a large and diverse number of controls, that along side the patch sockets, will give even the best and experienced synthesist endless possibilities.

This synth presents the controls in a user friendly and familiar synth layout that, together with this manual and other resources, enable even the new guy to get great sounds.

Synth - Percussion - Audio Processor

Ample is a compact analogue synthesizer. Analogue - as in really analogue. Aside from the MIDI chip (which has to be digital), everything else is totally analogue using real transistors and op-amps. There are no CPU stabilised and quantised circuits, no DCOs, no digital LFOs and no digital EGs, as found on other so called analogue synths. The circuitry is based on designs dating back to the mid-1970s. So Ample has a genuine old sound.

Circuits included

3x Analogue Oscillators

There are three analogue VCOs - each providing a wealth of features and modulation choices. VCO3 can easily be utilised as a LFO.

2x Analogue Low Frequency Oscillator

LFO2(/Sync) has a triangle wave output. VCO3 can be used as an LFO and has Saw, Triangle and Square wave modulation signals.

Analogue Filter

Ample uses a four pole 24bB per octave low pass filter.

Analogue Amplifier

The VCA can be set to THRU so it is always 'open'. This allows Ample to be used as an effects processor.

2x Analogue Envelopes

There are two EGs - each having full control over ATTACK, DECAY, SUSTAIN, and RELEASE.

Modulation

Great thought has been placed into modulation route choices, allowing a wide range of sounds to be produced, including percussion and 'modular' sounds further extended by patching with the jack sockets and pin matrix.

MIDI

MIDI is intentionally kept simple - so you can concentrate on making new sounds and making music - not getting tied up with SYSEX programming.

You get the all important control over filter cut-off using MIDI Velocity.

Patchable External CV Control Sockets

Ample has many input and output audio and CV sockets - to allow the synth to be effectively re-wired to make new sounds.

The sockets also enable it to be easily used with Eurorack and other modular systems. They can be patched together.

Sequencer

Ample has a vintage style 16 step sequencer.

Touch Keys

There are 6 touch keys that each output a set voltage. Use this to play the pitch or as modulation signals. A great tool for inspiration!

Pin Matrix

A neat way to patch the synth.

Echo

Nice lo-fi echo / delay.

Notes: ***B-STOCK: Dent on the side, product in perfect working order***


Like a greatest hits of recent Analogue Solutions synths, the Ample combines sound elements from the Fusebox with jack patch points, a patch pin matrix, plus sequencer and CV touch pads from the Generator, creating something new and unique.

Supplier's Notes:
Ample combines the best elements of several of Analogue Solutions' recent products.

The sound elements of Fusebox
Jack patch points of Concussor Eurorack
Patch pin matrix of Vostok
Echo from Dr Strangelove
Sequencer and CV touch pads of Generator

It shares all this yet still has its own sound!

Ample can be as complex or as simple as you want it to be

This synth has been given a large and diverse number of controls, that along side the patch sockets, will give even the best and experienced synthesist endless possibilities.

This synth presents the controls in a user friendly and familiar synth layout that, together with this manual and other resources, enable even the new guy to get great sounds.

Synth - Percussion - Audio Processor

Ample is a compact analogue synthesizer. Analogue - as in really analogue. Aside from the MIDI chip (which has to be digital), everything else is totally analogue using real transistors and op-amps. There are no CPU stabilised and quantised circuits, no DCOs, no digital LFOs and no digital EGs, as found on other so called analogue synths. The circuitry is based on designs dating back to the mid-1970s. So Ample has a genuine old sound.

Circuits included

3x Analogue Oscillators

There are three analogue VCOs - each providing a wealth of features and modulation choices. VCO3 can easily be utilised as a LFO.

2x Analogue Low Frequency Oscillator

LFO2(/Sync) has a triangle wave output. VCO3 can be used as an LFO and has Saw, Triangle and Square wave modulation signals.

Analogue Filter

Ample uses a four pole 24bB per octave low pass filter.

Analogue Amplifier

The VCA can be set to THRU so it is always 'open'. This allows Ample to be used as an effects processor.

2x Analogue Envelopes

There are two EGs - each having full control over ATTACK, DECAY, SUSTAIN, and RELEASE.

Modulation

Great thought has been placed into modulation route choices, allowing a wide range of sounds to be produced, including percussion and 'modular' sounds further extended by patching with the jack sockets and pin matrix.

MIDI

MIDI is intentionally kept simple - so you can concentrate on making new sounds and making music - not getting tied up with SYSEX programming.

You get the all important control over filter cut-off using MIDI Velocity.

Patchable External CV Control Sockets

Ample has many input and output audio and CV sockets - to allow the synth to be effectively re-wired to make new sounds.

The sockets also enable it to be easily used with Eurorack and other modular systems. They can be patched together.

Sequencer

Ample has a vintage style 16 step sequencer.

Touch Keys

There are 6 touch keys that each output a set voltage. Use this to play the pitch or as modulation signals. A great tool for inspiration!

Pin Matrix

A neat way to patch the synth.

Echo

Nice lo-fi echo / delay.

Notes: Branded Analogue Solutions LED Jack Pins.

These will light red / green as the signal swings from a positive to negative voltage.

Use the for diagnostics - or, just because they look cool (especially in the dark!)

The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty - they have practical advantages too!

Help seeing what's going on in the dark!

Help diagnose signal flow.

Notes: Antoc's new laptop stand L1 combines easy handling with sleek classical design. It can be easily assembled and disassembled without any effort and weighs only 1,5 kg. It is therefore the optimal tool for Djs who value stability and mobility.
The stand can be used universally and suits most commercially available laptops (not included).

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: ***B-STOCK: Box opened, product in perfect working order***


Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately

Notes: Compact phono stage to boost turntable output to line level. Add turntable inputs or upgrade the sound of your DJ mixer. Adjustable capacitance and gain to suit a range of cartridges.

Supplier's notes:
The DJ PRE II acts as an interface between your turntable and your audio recording/playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card. Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

Notes: Updated take on Artiphon's unique instrument, now with built-in sample engine. Loop, manipulate and create all in the unit, with built-in speaker and expressive motion sensor options.

Supplier's Notes:
Hold out your hands and meet Orba 2, the follow-up to Artiphon's award-winning synth, looper, and controller. Orba 2 has everything you loved about the original with multiple ground-breaking upgrades. Now, you can play any sound imaginable with its unique sample engine. Listen through the built-in speaker, or plug in and get loud. Customize your instrument with the Orba App and share your creations with friends. Take your creativity to new heights as you take Orba 2 anywhere you go.

Play any sound in the world
Orba 2 features a brand new sound engine that includes sampled audio recordings. This means you can now play instruments like electric guitars and upright pianos, as well as more adventurous sounds like vocals, found sounds, and custom artist songs. Imagine conducting an orchestra in the park with no strings attached and no screens required.

Create your own instruments
Orba 2 players can also capture or import their own sounds to create completely unique instruments. With the press of a button in the Orba App, everything around you can be turned into an Orba preset. A bicycle bell, a bird singing, or your roommate's amazing voice can all be played, looped, and shared as a musical melody. Sample recording requires a cabled USB connection.

Loop songs in seconds
Orba 2 allows you to record loops right on the device itself. Using Drum, Bass, Chord, and Lead, you'll be able to layer sounds to create songs that are uniquely yours. Orba 2 also has a quantize feature that snaps your musical phrases to the beat so that every moment fits perfectly into the groove. And since Orba 2 has far more memory than its predecessor, you'll be able to make way longer songs: up to 128 bars!

Play with gestures
Orba 2's touch and motion sensors combine to capture even the most subtle micro - movements. Its improved ceramic - like playing surface simultaneously reacts to the nine simple gestures: Tap, Press, Radiate, Tilt, Shake, Spin, Vibrato, Move, and Bump. Each gesture can control the onboard synth engine or your MIDI music software of choice. With unprecedented express ive potential, you'll never play the same note twice.

MIDI control
Use Orba to control your MIDI - based software and hardware instruments (via USB - C or wirelessly via Bluetooth MIDI). Orba works with GarageBand, Ableton Live, Logic Pro, Pro Tools, Cubase , FL Studio, as well as any MIDI - compatible mobile app. In addition, Orba is fully compliant with the new standard for MIDI Polyphonic Expression (MPE), making it capable of multiple independent note expressions.

What's in the box?

Orba
USB Cable
Quickstart Guide

Dimensions

3.14" (diameter) x 2" (height)

I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out


Bluetooth
Bluetooth LE MIDI (MIDI only)
Note: Windows 10 does not currently support Bluetooth LE MIDI
Speaker System
3W built-in active speaker system

Compatibility

iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit)

Note: Firmware updating requires a cabled USB connection and can only be done from a desktop computer.

Note: Transferring a sample from your device to Orba 2 requires a cabled USB connection.

Notes: Add an extra layer of protection to your Orba with our custom Silicone Sleeve. This flexible sleeve allows full access to buttons and cable ports and features a removable strap long enough to attach Orba to your wrist or backpack.

Notes: Protect your Orba with this impact-resistant softshell case, made from durable EVA plastic foam, and lined with soft fabric. Beneath the zippered lid is a compartment for your charging cable, and there's a lanyard for carrying or clipping the case to your backpack.

Notes: Arturia's flagship audio interface is designed for maximum versatility as well as top quality sound. With 16 analogue inputs, 12 analogue outputs and an array of digital I/O including ADAT, MIDI and clock, your creative process won't be interrupted by reconfiguring your hardware.

Supplier's Notes:
AudioFuse 16Rig

Studio mastermind interface

AudioFuse 16Rig is a high-density audio interface that combines an unmatched array of connections with a creativity-first workflow, built to handle a hardware-focused setup and keep your devices always in sync, always sounding pristine, and always ready to go.

Make your sound count

Introducing an interface that lets you leave everything connected, route anything to anything, and be more creative with your projects.

A workhorse hub of connections and smart features designed to get the job done, no matter the complexity. A powerful, reliable production tool that can be moulded to suit your audio setup, your workflow, and your sound.

A standalone mixer

For DAWless recording, live mixing, and outside-the-box audio configuration, AudioFuse 16Rig just works. Fire up its two low-latency internal mixers for sessions away from the studio, process audio & MIDI without a computer connection, and save your configurations for instant recall and quick setup switching.

Intricate audio routing

Get hands-on with an interface that lets you configure its connections to suit any need, including multiple sends/returns for effects, quick A/B speaker monitoring, and more. The included AudioFuse Control Center even features a matrix for quick 'connect anything and everything' configuration.

Quantity, meet quality

Give every recording the shine, clarity, and projection it deserves with two high-quality digitally-controlled preamps and 24-bit AD/DA converters from ESS and Cirrus Logic. Whether it's red-hot synths, dynamic guitars, delicate vocals, or any combination of inputs, expect top-notch sound across the board.

Choose your workflow

Your interface should adjust to suit your setup, not the other way around. Control AudioFuse 16Rig's settings via the display or the included software, configure it for desktop or 1U rackmount operation, use the DC-coupled outputs to send signals to synth modules, and connect your high-impedance headphones.

It's time your music had an upgrade

x16 ADAT I/O
x8 Analog Line DC coupled Outputs
x16 Analog Line Inputs
x1 MIDI In & 2x MIDI Out/Thru
Wordclock I/O
24-bit AD/DA 192kHz
Creative FX Bundle Included

Smart design

Sometimes it's the little things that matter most. You need your gear to complement and enhance the way you work, and that's the driving force behind AudioFuse 16Rig.

See how every piece of the AudioFuse 16Rig puzzle fits together to deliver a dream interface for audio & music hardware lovers.

Premium FX included

Every AudioFuse interface comes with an ever-evolving suite of creative plugins curated from Arturia's award-winning FX Collection. Refine any incoming audio with vintage studio tools, get experimental with contemporary effects, and embark on a journey through classic & modern sounds with Analog Lab.

AudioFuse Range

The new studio reference

The AudioFuse interface range connects your computer to the world of music. Record with the highest quality, monitor with absolute precision, and bring all of your gear together to create the music you always wanted to.

Analogue signal path

The highest quality components are used in the input and output signal paths of the AudioFuse series, giving you an audiophile-quality experience with no compromise.

Powerful monitoring

Multiple outputs, integrated A/B switching, monitor mix options, and even headphone outputs with both 3.5mm and 6.35mm connectors. The AudioFuse makes monitoring a joy.

Huge versatility

Each AudioFuse interface has its own unique set of features designed to make recording as fun and easy as possible.

Main Features

16 x TRS analogue inputs
Includes 2 x high-quality digitally-controlled preamps
Inputs 3 & 4 also available as 3.5mm stereo input

12 x analogue outputs
Includes 8 x DC-coupled TRS line outputs
Stereo monitor outputs
6.35mm front-panel outputs for reamping, dual-headphones

2 x ADAT in, 2 x ADAT out

Up to 16 channels of I/O at 48kHz, 8 channels at 88.2/96kHz

Wordclock in & out

1 x MIDI in, 2 x MIDI out/thru
5-pin DIN connectors
Route MIDI standalone

Low-latency USB-C connection

Class-compliant MIDI
3 x USB hub connections

Two internal standalone mixers

No computer connection needed
Cue mixer for sub-mixing and added flexibility
Main mixer controllable by MIDI

Color display with rotary control & menu buttons
Desktop or 1U rackmount configuration
Includes AudioFuse Control Center
Includes AudioFuse Creative Suite

Analog Lab Intro
Comp DIODE-609* NEW
Pre 1973
Pre V76
Pre TridA
Filter MINI
Chorus JUN-6
Comp FET-76
Delay TAPE-201
Rev PLATE-140
Phaser BI-TRON

What's in the box

Box content
AudioFuse 16Rig unit
Power supply
2x USB cable

Instrument dimensions
size : 17.3 x 11.6 x 1.7 inches (493 x 294 x 43mm)

Platform requirements

Windows
Win 10+ PC: 4 GB RAM; Intel i5 CPU or faster
1GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
10.13+: 4 GB RAM; Intel i5 CPU or Apple Silicon CPU
1GB free hard disk space
OpenGL 2.0 compatible GPU

Notes: You're making tomorrow's music... so why settle for yesterday's interface? AudioFuse is the revolutionary pro audio interface that sets a new standard in sonic quality, creative production and value. It fuses the superior sound of high-end analog studio consoles with the flexibility of a solid mobile interface- with all the connectivity you need for any recording or performance.

Whatever sound you need to capture, from the most delicate ambience to the heaviest cacophony, AudioFuse will reveal the beauty in everything.

Pro studio quality was the mantra right from the start with AudioFuse. Now you can transform your desktop, hotel room, concert- whatever, wherever- into a studio with world-class sound.

No compromises, each element of the AudioFuse has been selected to perfectly serve your sound, such as the two proprietary DiscretePROr microphone preamplifiers and the set of top-notch AD/DA converters.

Saving the purity of your sound and the passion it conveys is what AudioFuse is all about.

When creating and recording, you need an interface that lets you focus on the task at hand and keep distractions to a minimum.

With AudioFuse, we didn't want to settle for merely bringing you the sound quality of a pro studio, we wanted to bring you its workflow too. That's why you have detailed metering, talkback for instant communication with talent in the next room, inserts to add professional effects processing to your recording chain, A/B monitor switching, and direct access to the essential features so you can spend more time creating and less time setting up.

Wherever it comes from, whatever it has to travel through, and wherever it needs to go, AudioFuse will guide your sound.

AudioFuse connects with virtually everything: mics, instruments, turntables, studio equipment, Mac, PC, tablets, even iOS and Android phones. It all happens with a round-trip latency as low as 3 milliseconds so you'll feel right in the groove every time.

When you know your equipment is the best of the best, creativity can take care of itself.

When it is all about giving the best of yourself being able to rely on the best technologies becomes crucial. The lowest harmonic distortion, the most linear frequency response, the highest signal-to-noise ratio and the shortest latency, these technical terms may seem far removed from your creative process, but they are essential to delivering your music in the highest quality possible.

Capture the moment- at home, in the studio, on the road, or wherever creativity strikes.

AudioFuse has a super-solid aluminum chassis you can trust, complete with a hard cover to protect it from damage in your bag- or even just dust on your desktop. The build quality goes far beyond a great-looking exterior, as well. Your unit has to pass rigorous testing before it can be packed and shipped. It even comes with a test specification printout of your exact unit. Meet your new best friend for the studio and stage.