Secure shopping Secure shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping Secure shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: All Genres
 
Release Date
View:
Options
Items 51,651 to 51,700 of 52,461 on page 1,034 of 1,050
A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|ALL
« | 1 | 2 | 3 | ... | 1,033 | 1,034 | 1,035 | ... | 1,048 | 1,049 | 1,050 | »
Palmer MI Pocket Amp Bass Portable Bass Preamp
 Add to cart
 1 in stock $143.09
Cat: 647522 Rel: 01 May 17
 
Multi-purpose effects pedal & preamp for bass guitar
Notes: Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that is perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals.

The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
Read more
Palmer MI Pocket Amp MK2 Portable Guitar Preamp
 Add to cart
 1 in stock $85.14
Cat: 647523 Rel: 01 May 17
 
Portable guitar effects unit
Notes: In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility, the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.

Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Read more
QTX Bubble Fluid (5 litres)
 Add to cart
 2 in stock $9.33
QTX Bubble Fluid (5 litres) (bubble machine fluid)
QTX
Cat: 533625 Rel: 12 May 14
 
Bubble machine fluid, non-toxic solution
Notes: A water based liquid formulated for use with all makes of bubble machine. This solution produces lightweight bubbles that are longer lasting compared to other standard fluids available on the market.
Read more
QTX High Quality Haze Fluid (5 litres)
 Add to cart
 3 in stock $20.90
Cat: 464422 Rel: 13 Aug 12
 
Non-toxic water based fluid for haze machines
Notes: The high quality haze fluid is designed for use with all makes of haze machine producing a high quality fine mist enhancing light effects and laser shows. This fluid non-toxic and leaves no residue after use.

Read more
QTX Low Level Fog Fluid (5 litres)
 Add to cart
 2 in stock $19.87
QTX
Cat: 473209 Rel: 26 Nov 12
 
Smoke fluid
Notes: This high quality fluid is designed to be used in heater type fog machines. When vaporised the molecules are heavier than standard fluid so fall to the ground creating a similar effect to dry ice. Perfect for stage use and special occasions.
Read more
QTX Premium Fog Fluid (5 litres)
 Add to cart
 2 in stock $10.59
QTX
Cat: 473187 Rel: 05 Nov 12
 
Water based fog fluid
Notes: Our high performance smoke fluid has been specially formulated to produce a dense cloud which is long lasting. Designed to produce best results when used in smoke machines with a power rating between 1000 - 3000W giving ultra high performance while leaving no residue from this non-toxic, water based fluid.
Read more
QTX Smoke/Fog/Haze Fluid Mint Fragrance (20ml)
 Add to cart
$3.97 SAVE 20%
 2 in stock $3.18
QTX
Cat: 473195 Rel: 05 Nov 12
 
Smoke/fog/haze fragrance fluid
Notes: A fragrance to be mixed with smoke/fog/haze fluid creating a pleasant aroma when the fog is released in to the air.
1 bottle dilutes in to 5 litres of smoke/fog/haze fluid
Contents: 20ml
Read more
Venu BU Bubble Fluid (1 litre)
 Add to cart
$5.56 SAVE 10%
 4 in stock $5.01
Cat: 555405 Rel: 24 Nov 14
 
A water based liquid designed for use with most common brands of bubble machine
Notes: A water based liquid designed for use with most common brands of bubble machine.
Read more
ERM Midiclock+ MIDI Master Clock
 Add to cart
$184.41 SAVE 10%
 4 in stock $165.97
Cat: 531918 Rel: 08 Sep 14
 
Jitter-free MIDI masterclock for hardware gear or synchronisation with DAWs
Notes: Sync all your sequencers with ease and control the BPM - that's what we designed the midiclock for!

It's an ultra-stable hardware MIDI-Masterclock generator & has a great knob to give you full control over the tempo of your performances.

The midiclock generates incredibly accurate MIDI Clock messages.

It has two DIN MIDI outputs to connect to your gear. The clock signal can be distributed to more than two slaves by using MIDI Thru and you can start and stop everything with a single button.

Simply attach all devices that have MIDI Clock slave capabilities: Sequencers, synthesizers, drummachines and software like 'Live' from Ableton.

How to actually set the current BPM depends on the operating mode:

While using 'Live' mode, the BPM change immediately by turning the knob. You can use this mode if you want to make smooth tempo changes in your performance and are aware, that every turn of the knob changes the BPM.

In the 'Normal' mode, the changed value must be confirmed with a single click of the knob. This mode is perfect if you want to set your tempo once and simply need a stable clock signal. Accidental turning of the knob doesn't affect your BPM.
Read more
ERM Multiclock Desktop Sync Clock Device With USB
 Add to cart
 5 in stock $464.23
Cat: 600727 Rel: 15 Feb 16
 
Professional conversion box for syncing multiple hardware devices
Notes: Professional Sync:
The multiclock solves your sync issues in the studio and on stage once and for all.
Synchronisation of the multiclock to a DAW relies on a sample accurate audio clock stream, which in consequence guarantees absolutely tight clock signals with i1 sample of jitter.
Moreover, you can use it as a standalone generator or hook it up to follow other MIDI, DIN or analog master clocks.

Shift & Shuffle:
To compensate for any time lag of connected gear, you can shift each output channel individually and in realtime back and forth relative to the master clock.
The shift range is completely configurable and has a maximum of i400ms, the resolution is 20us.
If you have set your machines up to be on the spot, start playing with shuffle. Again, individually for each channel and in realtime.

Midi, Din, Modular & LFO:
Each channel can be set to either emit MIDI Clock, DIN sync (sync24) or analog clock.
Analog clock signals are configurable in polarity, start/reset behaviour and feature a flexible clock divider. An analog LFO is available with various waveforms and a range of 0-5V.
If you got them configured, channel settings can always be named and saved as a preset for later recall. Just in case you have a lot of gear.

USB Add-On
If you want, you can have your multiclock with an extra class-compliant USB Midi Add-On.
This enables you to send any MIDI commands from a DAW to your connected slaves while syncing to audio clock.
There is one virtual MIDI output for each channel and all commands are priority-merged with the accurate clock.
Read more
Expert Sleepers USAMO Universal Sample Accurate MIDI Output Device
 Add to cart
 1 in stock $105.98
Cat: 579275 Rel: 13 Jul 15
 
MIDI output device with 1/4" jack input and dedicated "Trim" pot
Notes: The Expert Sleepers USAMO (Universal Sample-Accurate MIDI Output) provides a sample-accurate, jitter-free MIDI output from your DAW.
The MIDI signal is generated by the USAMO software, a plug-in which runs as a virtual instrument (AU/VST/AAX, Mac & Windows), as audio in your DAW. The DAW sends MIDI to the plug-in; the plug-in translates that to audio and sends it to the USAMO hardware, via an output on your computer's audio interface. The USAMO then reconstructs the MIDI and outputs it on a standard 5 pin DIN MIDI socket.

In addition to MIDI note and controller data from the DAW, the USAMO software also generates MIDI clock, Song Position Pointer etc. It can also handle Sysex.

Because the MIDI signals are generated and transported as audio, they are guaranteed to be sample-accurately synced with your audio, and free of the jitter often associated with computer-generated MIDI.

The USAMO uses the same technology previously available from Expert Sleepers Silent Way and the ESX-8MD module, but now in a standalone box, and from an analogue audio connection (the ESX-8MD requires a Eurorack housing and a digital audio connection).

*User manual - http://www.expert-sleepers.co.uk/usamousermanual.html
Read more
Future Retro 1x4x2 MIDI & Din Thru Box
 Add to cart
 1 in stock $94.32
Cat: 618634 Rel: 17 Oct 16
 
Output expander box designed specifically for Swynx
Notes: The 1x4x2 Thru box is an output expander designed specifically for the Swynx product, but can be used with all of our other products as well.

The Thru box allows you to pass both MIDI and DIN Sync data to four seperate devices simultaneously. MIDI Thru boxes are quite common, but 1x4x2 is the first to provide DIN Thru capabilities.

Power is provided via MIDI.

Note, this product does not convert MIDI clock messages to DIN Sync. For MIDI to DIN Sync conversion please see our Swynx product.
Read more
Keith McMillen MIDI Expander
 Add to cart
 1 in stock $52.69
Cat: 477605 Rel: 24 Dec 12
 
MIDI interface
Notes: The KMI MIDI Expander enables you to use KMI gear such as SoftStep, 12 Step and QuNeo to control your MIDI hardware devices with 5-pin MIDI DIN connectors.

Plug in your MIDI devices to the KMI MIDI Expander and you're ready to send and receive MIDI data with or without a computer.

Read more
Kenton Merge 4 MIDI Merge Box
 Add to cart
 4 in stock $90.19
Cat: 443853 Rel: 16 Jan 12
 
Merge MIDI box with 4 inputs/2 outputs
Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.
Read more
Kenton Merge 8 Intelligent MIDI Merge Box
 Add to cart
 4 in stock $142.02
Cat: 650248 Rel: 22 May 17
 
MIDI signal mixer unit featuring 8 input connectors
Notes: Merges the data from up to eight separate MIDI sources (e.g. master keyboards, controllers, computers etc.) into a single MIDI data stream which appears at both the MIDI out sockets. Merges all MIDI data including MIDI Clock, MIDI time code and SysEx (see the manual for merging rules). Can also be configured as two completely independent 4 into 1 mergers with the simple press of a recessed button (see manual for details).

- 8 opto-isolated MIDI Ins
- 2 MIDI Outs
Read more
Kenton MIDI USB Host MkII
 Add to cart
 More than 10 in stock $100.80
Cat: 433906 Rel: 12 Sep 11
 
USB host to MIDI converter for 'Class Compliant' USB MIDI devices
Notes: Your USB device is plugged into the USB MIDI Host MkII instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

MIDI data received at the MIDI In socket will be sent to the USB device. MIDI data received from the USB device will be sent to the MIDI Out socket.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.
Read more
Kenton Pro DCB Mk3 MIDI To DCB Converter
 Add to cart
 2 in stock $180.18
Cat: 443845 Rel: 16 Jan 12
 
Bi-directional MIDI-DCB interface, including 14 pin DCB lead
Notes: The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8 (must have an existing DCB 14 pin). Just plug in and go.

As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.

2 x 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the selected DCB lead.

*Supplied with UK 3-pin power adapter
Read more
Kenton Pro Solo MkII MIDI To CV Converter
 Add to cart
 3 in stock $151.56
Cat: 378960 Rel: 18 Jan 10
 
High specification single synth MIDI to CV converter
Notes: The Pro-Solo is designed to control one monosynth and features a single CV & Gate output, fully programmable auxiliary CV output and 1 LFO. Editing is easy with its LED display and non-volatile setup memory. The Kenton Pro Solo MkII can also be used as a Sync 24 and arpeggio clock converter.
Read more
Kenton THRU25 MIDI Thru Box
 Add to cart
 2 in stock $163.22
Kenton THRU25 MIDI Thru Box (MIDI interface)
Cat: 584896 Rel: 21 Sep 15
 
1 MIDI in to 25 MIDI thru sockets, works for ALL MIDI messages including Clock, SysEx, MTC etc
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

9V switch mode power supply included.
Read more
MIDI Solutions Beat Converter
 Add to cart
 1 in stock $104.93
MIDI Solutions Beat Converter (MIDI beat converter)
Cat: 592379 Rel: 16 Nov 15
 
Can be programmed to send out a Note or Control Change message on the beat in response to MIDI Clock messages
Notes: The Beat Converter can be programmed to send out a Note or Control Change message on the beat in response to MIDI Clock messages. This enables devices that only allow their tap tempo function to be controlled by a Note or Control Change message to be synchronized to devices that send MIDI Clock.

The Beat Converter is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Beat Converter Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Beat Converter can be reprogrammed with new settings as often as needed.

The Beat Converter is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information).
Read more
MIDI Solutions Beat Indicator
 Add to cart
 1 in stock $104.93
MIDI Solutions Beat Indicator (MIDI beat indicator)
Cat: 592381 Rel: 16 Nov 15
 
Contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages
Notes: The Beat Indicator contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages. An invaluable tool for enabling drummers or live musicians to keep time with MIDI sequences during breaks or intros. The flash can be advanced or delayed by up to 128 ms from the actual beat, and the brightness of the flash is programmable. The Beat Indicator can also be programmed to flash in response to a Note or Control Change message.

The Beat Indicator is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Beat Indicator Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Beat Indicator can be reprogrammed with new settings as often as needed.

The Beat Indicator is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). It is recommended that no more than one Beat Indicator be powered from a single MIDI Out or Thru, if other MIDI Solutions products are required in series with the Beat Indicator a MIDI Solutions Power Adapter is recommended.
Read more
MIDI Solutions Event Processor Plus
 Add to cart
 1 in stock $159.52
Cat: 524241 Rel: 17 Mar 14
 
Compact MIDI event processor with a wide variety of functions
Notes: The MIDI Solutions Event Processor Plus offers all of the functionality of the MIDI Solutions Event Processor, with 32 settings instead of the Event Processor's 10, and 8 variable storage locations instead of the Event Processor's 2. Each of the Event Processor Plus's 32 settings can be programmed with a unique MIDI processing function. By combining these settings the Event Processor Plus becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor Plus works by comparing each incoming MIDI event with each of its 32 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor Plus becomes an extremely powerful tool capable of achieving virtually any combination of MIDI-processing functions.

Following is a list of the Event Processor Plus's functions, but better yet download the Event Processor Plus Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor Plus. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

Filter MIDI Events

Map MIDI Events

Trigger MIDI Events

Cycle Through a Sequence of MIDI Events

Turn Settings On and Off

Store Incoming Values in Variables


The Event Processor Plus is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the Event Processor Plus Programming Tools software. Once programmed, the Event Processor Plus's settings are retained even after power is removed. The Event Processor Plus can be reprogrammed with new settings as often as needed.

The Event Processor Plus is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
MIDI Solutions Merger
 Add to cart
 2 in stock $75.52
MIDI Solutions Merger (MIDI interface)
Cat: 524233 Rel: 17 Mar 14
 
Compact 2 in 1 out MIDI merger
Notes: The MIDI Solutions Merger is a 2-in 1-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
MIDI Solutions Merger (B-STOCK)
 Add to cart
 2 in stock $69.95
Cat: 606539 Rel: 17 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Merger is a 2-in 1-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
MIDI Solutions Pedal Controller
 Add to cart
 1 in stock $127.18
Cat: 524242 Rel: 17 Mar 14
 
Compact MIDI unit for generating MIDI data using an external expression pedal
Notes: The Pedal Controller accepts an expression pedal (such as the Yamaha FC7 or Roland EV-5 or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup.

The Pedal Controller's factory default settings are for it to send CC#7 (volume) on MIDI channel 1, so if this is what you need the Pedal Controller to do then no programming is necessary - just insert the Pedal Controller in your setup and it's ready to use. The Pedal Controller can also be programmed to send other types of MIDI messages, for more info read on...

The Pedal Controller can be programmed to send:

Aftertouch

Pitch Bend

Control Change

System Exclusive

The Pedal Controller has a MIDI Echo parameter that is selectable on/off.

The Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. Small fluctuations are eliminated when the pedal is in a stationary position and no extraneous messages are sent out. When the pedal is moved slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many control wheels or knobs only update themselves every two or every four values, resulting in coarser control, and sometimes zipper noise.

Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.

The Pedal Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). Once programmed, its settings are retained even after power is removed. The Pedal Controller can be reprogrammed with new settings as often as needed. The Pedal Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON.

The Pedal Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.1 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
Moog Werkstatt 3.5mm CV Expansion Header
 Add to cart
 1 in stock $44.52
Cat: 551155 Rel: 02 Feb 15
 
Easy-to-install CV/Gate accessory for converting Werkstatt's patchable header into 3.5mm connections
Notes: The Werkstatt CV Expansion Board is an easily installed CV/Gate accessory for the Werkstatt 01. Once installed, the Werkstatt CV Expansion Board converts Werkstatt's patchable header into a grounded series of 3.5mm connections. This allows for streamlined integration with analog sequencers, modular synthesizers, and other CV equipped devices.

Package Contains:

- Expansion Board

- 2 Screws for installation

- Installation instructions
Read more
MOTU Micro Lite MIDI Interface Patchbay
 Add to cart
 3 in stock $135.67
Cat: 437471 Rel: 17 Oct 11
 
5-in/5-out MIDI interface, compatible with Mac and Windows
Notes: Built from the same technology found in MOTU's flagship MIDI Timepiece, the Micro Lite is a professional MIDI interface that provides portable, plug-and-play connectivity to any USB-equipped Mac or Windows computer.

The Micro Lite provides 5 MIDI inputs, 5 MIDI outputs, 80 MIDI channels and compatibility with all Mac and Windows software. Large front-panel LEDs illuminate to indicate MIDI activity.

The Micro Lite takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Micro Lite is powered by the USB port i no wall wart or AC plug.

With its attractive yet rugged metal casing, the Micro Lite slides easily into a shoulder bag or briefcase for ultra-compact portability and convenient desktop operation. Removable rack attachments, as well as a custom center-joint fastener, are included and allow you to easily mount 2 Micro Lites side by side in a standard 19" equipment rack.

No other MIDI interface offers this much value, performance and portability at such an affordable price.

Read more
MOTU MIDI Express 128 MIDI Interface Patchbay
 Add to cart
 2 in stock $201.04
Cat: 452150 Rel: 30 Apr 12
 
8-input/8-output MIDI interface compatible with Mac and Windows
Notes: The MIDI Express 128 is an 8-input/8-output MIDI interface compatible with Mac and Windows.

Built from the same technology found in MOTU's flagship MIDI Timepiece, the MIDI Express 128 is a professional MIDI interface that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer. The Express 128 provides 8 x MIDI input, 9 x MIDI output, 128 x MIDI channels and compatibility with all Macintosh and Windows software.

The MIDI Express 128 takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express 128 is powered by USB, no wall wart or AC plug.

No other MIDI interface offers this much value and performance at such an affordable price.

Read more
MOTU MIDI Express XT MIDI Interface Patchbay
 Add to cart
 1 in stock $361.22
Cat: 440724 Rel: 14 Nov 11
 
8-input/8-output MIDI interface, patchbay and merger with time code sync
Notes: Built with MOTU's award-winning MIDI interface technology, the MIDI Express XT is a professional MIDI interface and SMPTE synchronizer that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer.

The Express XT provides 8 MIDI inputs, 9 MIDI outputs, 128 MIDI channels and compatibility with all Mac and Windows software. 16 convenient, one-touch presets (8 x factory and 8 x user programmable) give you instant front-panel access to multiple operational configurations.

The included ClockWorks console software for Mac OS X and Windows provides comprehensive MIDI routing, merging and muting.

As a professional-grade SMPTE time code synchronizer, the Express XT converts and stripes SMPTE in all frame formats (23.976, 24, 25, 29.97 drop and non-drop, and 30). SMPTE jam sync with adjustable freewheeling provides glitch-free sync.

The Express XT also supports MIDI Machine Control (MMC), with the ability to serve as either an MMC master or slave. The Express XT can distribute MMC transport commands to all other connected MMC devices.

Connect a foot switch to the convenient front-panel pedal input and then program it to generate MIDI data when pressed. Send the data to any connected devices. For example, you could send MIDI patch changes to synths and sound modules during live performance.

The MIDI Express XT takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express XT's internal international power supply delivers reliable performance and professional operation.

No other MIDI interface offers this much value and performance at such an affordable price.
Read more
Patchblocks Midiblock MIDI Interface Module (green)
 Add to cart
 6 in stock $33.30
Cat: 594620 Rel: 11 Jan 16
 
MIDI interface for patchblocks, can be either MIDI input or output
Notes: The Midiblock allows you to interface Patchblocks with other MIDI equipment. Depending on which side it is connected to a Patchblock, it can either act as a MIDI in, or MIDI out adapter. Also, two Midiblocks can be used at the same time, allowing to transform a Patchblock into a MIDI filter or arpeggiator, by receiving and sending MIDI data at the same time.
Read more
Allen & Heath LEDLamp X - Gooseneck Right Angled DJ Mixer Lamp
 Add to cart
 3 in stock $51.94
Cat: 440367 Rel: 19 Dec 11
 
Right-angled DJ mixer & equipment lamp for consoles with lamp socket on rear panel
Notes: The LEDLamp is a variable brightness 18" gooseneck lamp for mixing console and other equipment illumination using LEDs (light emitting diodes) instead of a filament bulb. The LEDs are angled at 40 degrees ensuring a suitably wide light dispersion. Producing a bright, white light, the LEDLamp is more relaxing on the eye and better suited to illuminating a console control surface than the yellow light of a filament bulb. Unlike the filament bulb, the LEDs do not produce heat and they do not require replacement in time. A dimmer function is built into the lamp head. The light can be variably dimmed using a knurled thumbwheel from fully on to almost off so that it can be set according to the operating brightness required.

The LEDLamp circuit is built into a strong, stylish plastic moulding to ensure protection and user comfort. The flexible metal gooseneck can be bent into shape to adjust to the area being illuminated. It terminates in a 4-pin metal XLR suitable for plugging into the mating socket as found on many consoles including those made by Allen & Heath. Alternatively, it can be powered from an external 12V power supply.

LEDLamp is available in 2 versions, LEDLamp-X (right angled, designed for consoles with lamp socket on the rear panel) and LEDLamp-SX (straight, designed for consoles with lamp socket on the front panel).
Read more
Allen & Heath WZ20S Xone 464 Syslink Option
 Add to cart
 1 in stock $46.63
Cat: 440260 Rel: 12 Dec 11
Notes: A Sys-Link card fitted in the mixer allows console-to-console connection to increase the number of input channels. Up to 3 consoles may be daisy-chained.

The Allen & Heath WZ20S/Xone Syslink Option is compatible with other A&H consoles fitted with Sys-Link1.
Read more
Allen & Heath Xone 22 Replacement Crossfader (003-876)
 Add to cart
 5 in stock $21.19
Cat: 404634 Rel: 27 Sep 10
Notes: The Allen & Heath cross fader is the official replacement part from Allen & Heath, which fits the cross fader of the Xone:22 model.
Read more
Allen & Heath Xone 32 Replacement Tap Tempo Red Cap (AJ0300)
 Add to cart
 2 in stock $1.05
Cat: 342071 Rel: 16 Mar 09
Notes: The Allen & Heath red cap is the official replacement part from Allen & Heath, which will fit the tap tempo cap of Xone:02 turntable.
Read more
Allen & Heath Xone 32 Replacement White Switch Cap (AJ3950)
 Add to cart
 2 in stock $1.05
Cat: 342076 Rel: 16 Mar 09
Notes: The Allen & Heath switch cap is the offical replacement cap from Allen & Heath, which fits the white switch of Xone:32 mixer.
Read more
Allen & Heath Xone 42 / Xone 92 Replacement Knob (AJ5387)
 Add to cart
 More than 10 in stock $1.01
Cat: 342079 Rel: 16 Mar 09
 
Official replacement knob part for XONE:42 and 92 mixer models
Notes: The Allen & Heath knob is the offical replacement part from Allen & Heath, which fits the Xone:42 and 92 mixers.
Read more
Allen & Heath Xone 42 Replacement Alpha Crossfader (003-913)
 Add to cart
 2 in stock $58.28
Cat: 546925 Rel: 08 Sep 14
 
Replacement crossfader fro Allen & Heath's Xone:42 DJ mixer
Notes: This Allen & Heath crossfader is the offical replacement part from Allen & Heath, which fits the Alpha crossfader of the Xone:42 mixer.
Read more
Allen & Heath Xone 62 Replacement Knob (AJ4246)
 Add to cart
 7 in stock $1.05
Cat: 390276 Rel: 03 May 10
 
Official replacement knob part for XONE:62 mixer model
Notes: The Allen & Heath knob is the offical replacement part from Allen & Heath, which fits the knob of the Xone:62 mixer.
Read more
Allen & Heath Xone 92 Replacement Front Panel (storm grey)
 Add to cart
 4 in stock $47.69
Cat: 450176 Rel: 02 Jul 12
 
Replacement front panel
Notes: Replacement front panel for the Allen & Heath XONE:92 DJ mixer.
Read more
Audio Innovate InnoFader Pro 2 Replacement Crossfader
 Add to cart
 3 in stock $145.21
Cat: 590533 Rel: 19 Oct 15
 
Replacement audio crossfader with insulated, easy-to-use adapters
Notes: The Innofader Pro2 is the ultimate replacement audio fader. It gives you an ultra precise i 0.05mm cut-in accuracy for even tighter control of your scratches. Separate left and right cut controls make it easy to adjust without the need to recalibrate. And for the perfectionist in you, it even has super precise presets which allow you to do things like shift the cut point by a mere 0.04mm, less than even the thickness of your hair.

Thanks to the feedback of customers like yourself, the Pro2 now fits more mixers than ever, all without modification. The adapter boards are already insulated and marked clearly to show you the specific one you need for your mixer.

To take advantage of all of the Innofader Pro2 adjustability, we recommend you purchase an Innojuster. This allows you to access Innofader Pro2 control dials plus the calibration button from outside the mixer.
Read more
Audio Innovate Mini InnoFader Duo Replacement Crossfader & Channel Fader
 Add to cart
 4 in stock $98.56
Cat: 611356 Rel: 16 May 16
 
Pack of 2 replacement fader units, can be used as channel faders OR cross faders
Notes: The mini innoFADER Duo makes upgrading more affordable than ever. With two yes TWO! mini innoFADERS in a single package! You can swap your Z2 channel faders or you can use one and still have a spare mini innoFADER to keep you up and running.

Works as a replacement for the following mixers and controllers:
- DJ Tech - TR-1S crossfader
- Akai AMX crossfader
- Hercules RMX2 crossfader
- All DJ-Tech DIF crossfaders
- All Epsilion inno-MIX crossfaders
- TRX Channel faders and crossfader
- All reloop RMX and Terminal Mix crossfaders
- All American Audio MXR and VMS crossfaders
Read more
Audio Innovate Mini InnoFader Duo Replacement Crossfader & Channel Fader (B-STOCK)
 Add to cart
 1 in stock $86.91
Cat: 647573 Rel: 16 May 16
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


The mini innoFADER Duo makes upgrading more affordable than ever. With two yes TWO! mini innoFADERS in a single package! You can swap your Z2 channel faders or you can use one and still have a spare mini innoFADER to keep you up and running.

Works as a replacement for the following mixers and controllers:
- DJ Tech - TR-1S crossfader
- Akai AMX crossfader
- Hercules RMX2 crossfader
- All DJ-Tech DIF crossfaders
- All Epsilion inno-MIX crossfaders
- TRX Channel faders and crossfader
- All reloop RMX and Terminal Mix crossfaders
- All American Audio MXR and VMS crossfaders
Read more
Audio Innovate Mini InnoFader PNP Plus Replacement Crossfader
 Add to cart
 2 in stock $98.56
Cat: 647204 Rel: 17 Apr 17
 
Upgrade model for the mini Innofader PNP P
Notes: The mini Innofader Plus is the new upgrade part which will replace the mini Innofader PNP P. The cut point has 0.1mm precision combined with a lightning fast 1msec response time. And now you can hook it up to an innoJUSTER to ensure you get the hairline precision cut point exactly where you want it on the fly!

The installation process is now greatly simplified. Low profile connectors ensure that you do not have to worry about breaking any cables. The button is now easier to press. And the adjustments now can be done with simpler swipe movements.
Read more
Audio Innovate Mini InnoFader PNP Plus S Replacement Crossfader
 Add to cart
 2 in stock $95.38
Cat: 647205 Rel: 17 Apr 17
 
Replacement crossfader - "S" solder pin version
Notes: The mini innoFADER Plus S Solder pin Version allows you to get precision cutting on even the most basic low cost MIDI controllers. Just like the mini Innofader Plus the solder version offers the same 0.1mm precision cut point and under 1msec response time. No longer are you "stuck" when your controller has a compact fader soldered to the PC board. Having the solder pin S version means you can essentially transform your average controller into a pro model. We even included an external switch so you can adjust the mini Innofader PLUS-S without having to remove it.

NOTE: This model requires some soldering.
Read more
Audio Innovate Mini InnoFader PNP Replacement Crossfader For Pioneer DJM 300, 500 & 600 Mixers
 Add to cart
 3 in stock $98.56
Cat: 647211 Rel: 17 Apr 17
 
Special mini Innofader designed for the DJM-300, DJM-500 & DJM-600
Notes: The mini innoFADER DJM is specifically designed to work in legacy Pioneer DJM-300, DJM-500, and DJM-600 mixers. It uses essentially the same components as the Innofader Pro2 so it also has the same 0.1mm cut point accuracy and 1msec response time. Just in case you want to use this performance part on other Pioneer DJM mixers, it can be made to work with 3 pin connectors found on most newer DJM mixers.
Read more
Audio Technica ATH MSR7NC High Resolution Active Noise Cancelling Over Ear Headphones (black)
 Add to cart
 3 in stock $238.96
Cat: 616210 Rel: 20 Jun 16
 
High resolution audio headphones with new 360- omnidirectional noise-cancelling technology & up to 30 hours battery life
Notes: The Ultimate Listening Experience:
Uniting the latest in headphone technologies, the MSR7NC combines superb high-resolution audio sound quality with 360- omnidirectional active noise-cancelling technology, allowing you to hear every detail in perfect clarity without the distraction of any unwanted noise around you.

Crafted using exquisite curves and bold lines, engineered to complement the ear's shape, and incorporating soft memory-foam earpads and headband for ultimate comfort, the MSR7NC has a design worthy of its sound, giving you the perfect soundtrack to live by.

- Delivers High-Resolution Audio with active noise-cancelling technology that doesn't compromise on sound quality.
- New 360- omnidirectional noise-cancelling technology that offers unrivalled consistency and reliability, helping to block out any unwanted noise around you.
- Perfect for use at home, on-the-go or whilst travelling
- Soft memory foam earpads for better isolation and improved comfort, perfect for long-listening sessions.
- Includes two detachable cables (standard 1.2 m cable and a 1.2 m cable with smartphone control and mic), airline adapter, USB charging cable and carrying pouch.

"Exquisite Curves"
Complementing the ear's shape, the MSR7NC's design is constructed using exquisite curves and bold lines.

"Outstanding Audio Clarity"
Triple-vent airflow system to reduce unwanted resonance and for outstanding audio clarity.

"Ideal For Travelling"
360- omnidirectional noise-cancelling technology blocks out any unwanted noise around you making it ideal for when travelling.

Up to 30 hours battery life:
Listen to your music continuously for up to 30 hours on one charge.

Flexible swivel design:
Rotating earcups to provide the listener with a tailored fit.

Comfortable fit:
Soft memory-foam has been incorporated on the earpads and headband to provide hours of listening comfort.

Amplify your sound:
Complement your MSR7NC's with Audio-Technica's AT-PHA100 Portable Headphone Amplifier for the ultimate High-Resolution Audio experience.
Read more
AV Link Rechargeable Wireless Bluetooth Noise Cancelling Headphones (black)
 Add to cart
 1 in stock $17.49
Cat: 625501 Rel: 12 Sep 16
 
Lightweight noise cancelling headphones with wireless bluetooth connectivity and dynamic bass technology
Notes: These incredible rechargeable wireless headphones are great for listening to your music while on the move. Pair via Bluetooth with your smart device and control your media with the MP3 function control keys on the edge of the earcup. Alternatively play MP3 or WAV media files from a micro SD card using the slot in the side of the earcup. In-built is an FM radio and a microphone allowing hands free calls. These headphones offer a fantastic listening experience with dynamic bass technology. The noise cancelling feature blocks out background noise making them perfect for use on public transport. Lightweight and comfortable, you can relax into your music, and when you are done, fold them away and store in the carry case.

- Wireless Bluetooth connectivity
- Noise cancelling, perfect for cutting out low noises from planes or trains
- Dynamic bass technology
- Internal rechargeable battery with up to 8 hours playback
- SD card slot (max capacity 32GB)
- Built-in microphone for hands free calls
- Folds away for compact storage

- Power supply: Internal rechargable Lithium Ion battery
- Battery life (Bluetooth playback): Up to 4 hours
- Battery life (SD card playback): Up to 8 hours
- Speaker size: 40mm dome
- Frequency response: 12Hz - 22kHz
- Sensitivity: 108dB/mW
- Impedance: 32 Ohms at 1kHz
- Connections: Bluetooth, 3.5mm stereo jack, micro USB for charging
- Bluetooth version: 3.0
- Bluetooth range: Up to 10m (clear line of sight)
- Dimensions: 190 x 150 x 70mm
Read more
AV Link Rechargeable Wireless Bluetooth Noise Cancelling Headphones (blue)
 Add to cart
 1 in stock $13.80
Cat: 647278 Rel: 17 Apr 17
 
Wireless Bluetooth headphones
Notes: These incredible rechargeable wireless headphones are great for listening to your music while on the move. Pair via Bluetooth with your smart device and control your media with the MP3 function control keys on the edge of the earcup. Alternatively play MP3 or WAV media files from a micro SD card using the slot in the side of the earcup. In-built is an FM radio and a microphone allowing hands free calls. These headphones offer a fantastic listening experience with dynamic bass technology. The noise cancelling feature blocks out background noise making them perfect for use on public transport. Lightweight and comfortable, you can relax into your music, and when you are done, fold them away and store in the carry case.

In the box:

- Wireless headphones
- 1.2m 3.5mm stereo jack lead
- 0.5m USB charging lead
- Carry pouch
- User guide
Read more
AV Link Rechargeable Wireless Bluetooth Noise Cancelling Headphones (pink)
 Add to cart
 1 in stock $13.80
Cat: 647280 Rel: 17 Apr 17
 
Wireless Bluetooth headphones
Notes: These incredible rechargeable wireless headphones are great for listening to your music while on the move. Pair via Bluetooth with your smart device and control your media with the MP3 function control keys on the edge of the earcup. Alternatively play MP3 or WAV media files from a micro SD card using the slot in the side of the earcup. In-built is an FM radio and a microphone allowing hands free calls. These headphones offer a fantastic listening experience with dynamic bass technology. The noise cancelling feature blocks out background noise making them perfect for use on public transport. Lightweight and comfortable, you can relax into your music, and when you are done, fold them away and store in the carry case.

In the box:

- Wireless headphones
- 1.2m 3.5mm stereo jack lead
- 0.5m USB charging lead
- Carry pouch
- User guide
Read more
AV Link Rechargeable Wireless Bluetooth Noise Cancelling Headphones (red)
 Add to cart
 2 in stock $17.49
Cat: 625503 Rel: 12 Sep 16
 
Lightweight noise cancelling headphones with wireless bluetooth connectivity and dynamic bass technology
Notes: These incredible rechargeable wireless headphones are great for listening to your music while on the move. Pair via Bluetooth with your smart device and control your media with the MP3 function control keys on the edge of the earcup. Alternatively play MP3 or WAV media files from a micro SD card using the slot in the side of the earcup. In-built is an FM radio and a microphone allowing hands free calls. These headphones offer a fantastic listening experience with dynamic bass technology. The noise cancelling feature blocks out background noise making them perfect for use on public transport. Lightweight and comfortable, you can relax into your music, and when you are done, fold them away and store in the carry case.

- Wireless Bluetooth connectivity
- Noise cancelling, perfect for cutting out low noises from planes or trains
- Dynamic bass technology
- Internal rechargeable battery with up to 8 hours playback
- SD card slot (max capacity 32GB)
- Built-in microphone for hands free calls
- Folds away for compact storage

- Power supply: Internal rechargable Lithium Ion battery
- Battery life (Bluetooth playback): Up to 4 hours
- Battery life (SD card playback): Up to 8 hours
- Speaker size: 40mm dome
- Frequency response: 12Hz - 22kHz
- Sensitivity: 108dB/mW
- Impedance: 32 Ohms at 1kHz
- Connections: Bluetooth, 3.5mm stereo jack, micro USB for charging
- Bluetooth version: 3.0
- Bluetooth range: Up to 10m (clear line of sight)
- Dimensions: 190 x 150 x 70mm
Read more
Items 51,651 to 51,700 of 52,461 on page 1,034 of 1,050
A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|ALL
« | 1 | 2 | 3 | ... | 1,033 | 1,034 | 1,035 | ... | 1,048 | 1,049 | 1,050 | »
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close